Posting topic to more than one thread and in different categories...

Is there anything in the TOU we can "refer" to when users post the same topic in more than one thread and to add to that, more then one category? Case in point: http://discussions.apple.com/thread.jspa?messageID=8806009#8806009 (This is just one example)
Limnos had a valid point. If we had a section in the TOU we could copy/paste from, I think it would help if we could refer to authority, ie., TOU.
Thanks!
Carolyn

I wouldn't get into too much of a flury about that with end users. Notify as needed and let the moderators decide if it needs to be deleted. A good rule of thumb is you want the discussions to have:
Everyone should feel comfortable reading Submissions and participating in discussions.
That's from Terms of Use.
And then there is:
You agree to not interfere with or disrupt the Site.
I'm seeing that logically one can conclude directing users not to crosspost may be considering interference with the site. I may suggest someone post in another forum if a solution is not transparent in the forum they are using, but that's as far as I'm comfortable bending the rules.
I'm trying hard to keep my thumbs away from the keyboard when I see duplicate posts.

Similar Messages

  • More than one thread in Openmp

    Hello Friends,
    I am trying to paralelize a great c program and now I am having problems for getting more than one thread.
    I tried it inside my code, at first I put omp_set_dynamic(0) and after I put omp_set_num_threads(4), but I got only one thread.
    These functions worked fine with a simple hello world code and I got to run 4 threads, but in my big code they didn't work. Could anybody help me? Any hint would be very good!...
    Regards,
    Glauber

    Hi,
    Thanks, It's a big code and was divided in 9 files, even so, I will post its most important parts.
    That functions are called from sequential part before the parallel region as you will can see below:
    // global.h
    #if defined (OMP_ENABLED)
    #     include "omp.h"
    #endif
    // main.c
    #include <stdio.h>
    #include <stdlib.h>
    #include <time.h>
    #include <math.h>
    #include <string.h>
    #include <stdarg.h>
    #include "global.h"
    #ifdef USE_READLINE
    # include <readline/readline.h>
    # include <readline/history.h>
    static char **readline_completion(const char *, int, int);
    #endif
    # if defined (OMP_ENABLED)
    int           proc_id; /* process ID (0, 1, ..., num_procs-1) */
    int           num_procs; /* number of active processors */
    # endif
    int main (int argc, char *argv[])
         int i;
    # if defined (OMP_ENABLED)
    omp_set_dynamic(0);
    omp_set_num_threads(4);
    num_procs = omp_get_num_threads();
    printf("Num procs: %i\n",num_procs);
    if( num_procs <= 1)
    exit(0);
    # endif
    //mcmc.c
    #include <stdio.h>
    #include <stdlib.h>
    #include <time.h>
    #include <math.h>
    #include <string.h>
    #include <ctype.h>
    #include <limits.h>
    #include <stdarg.h>
    #include "global.h"
    int RunChain (long int *seed)
         int          i, j, k, n, chn, stopChain;
         for (chn=0; chn<numLocalChains; chn++)
    #if defined (OMP_ENABLED)
    #pragma omp parallel for private(chn)
    #endif
              for (chn=0; chn<numLocalChains; chn++)
    If you need something else, please, return me
    Thanks in advanced
    Glauber

  • Synching with more than one computer and attempting to delete more than one

    Rage is not the word. I have been having the worst time with this thing! UGH! 1st I have more than one computer that has different music on each, but this thing will only sync with 1 and delete anything from another library already added. CRAZY! Second I wanted to rip my cds to my computer without being connected to the internet and itunes won't recong the music added at a later time. I have to be connected to the internet for it to Id the music as I am ripping...CRAZY! Then I was attempting to delete the duplicated music that was not Id and it would only allow me to delete one song at a time...CRAZY! Is there a way to have this thing synch with more than 1 computer? Delete songs in a group and not everything in sight. If so how and if anyone has any remedies for the rest of this craziness I would be most appreciative. I took me forever to even figure how to get to the point to post this. I beginning to feel very sorry I bought this thing. I thought I could rip my cds, and use my work and home computers to synch with it. Please someone tell me I wasn't wrong for making this assumption. Will I be able to sych with other ipods? I bought this thing thinking I could was I wrong. I haven't even attempted that yet. I have an 80 GB ipod

    "I have more than one computer that has different music on each, but this thing will only sync with 1 and delete anything from another library already added"
    You can't "sync" that is automatically update an iPod from multiple libraries or computers. If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
    Using iPod with Multiple computers
    Managing content manually on iPod
    "I have to be connected to the internet for it to Id the music as I am ripping"
    That's correct, iTunes (and other music programs) downloads the information from an online database that contains the details of many thousands of CDs.
    "Delete songs in a group and not everything in sight"
    Click on the first track you want to delete in a list, hold down the shift key and click on the last one, this highlights everything in between. Press the delete key
    "Will I be able to sych with other ipods?"
    What do you want to sync with other iPods, iTunes? You can't sync one iPod with another, you can only update from iTunes. If you are adding a second iPod for your own use, just connect the new iPod to your computer and follow the on screen instructions. It will update from your existing library. Depending on the size of your library and the type of iPod you choose you can have it update all songs and playlists, selected playlists only or you can manage it manually. You can also have a look at this page:How to use multiple iPods with one computer
    You might also be interested in this page: iPod Fast Start: The New User's Guide to iPod

  • More than one Thread accessing the same records in the database

    Hi, I have more than one thread accessing a synchronized method called getMinPrimaryKey() which gets the lowest of the primary key frm the table based on the a flag which is set to true. once it is retrieved the same method also sets the flag as false so it is not retrieved the second time. so next time a different thread calls this method it should retrieve the next available lowest primarmy key.
    but even when i have the method as synchronized different threads keep returning the same primary key instead of getting the next sequence. can some one let me know where I might go wrong and what could be the solution. is it because when once i retrieve the record and set the flag as false, i also need to commit it?, which could be the reason the select query still picks up the same primary key. please help me out on this.
    thanks,
    Harish

    Correction. If different threads always return the same key then your table isn't getting up dated. If different threads sometimes return the same key, then either the database is committing lazily, or else the threads are calling getMinPrimaryKey on different objects and so are not executing atomically with respect to each other.

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • Can't I get my old iTunes that I have purchased downloaded from Apple?  I don't have the old computer anymore.  Also, is there a number to call if I think I have more than one account and would like them to consolidate my accounts?

    I have two problems:
    1.  I no longer have my old computer and want to download the iTunes I have purchased in previous years.  Aren't they all in "the cloud?"
    2.  I think I have more than one account and would like to get them combined.  Is there a good number or email to Apple that I could get that done?
    THanks!
          SHawn

    It has always been very basic to always maintain a backup copy of your computer.  Have you failed to do this?
    You can redownload some iTunes purchases in some countries:
    Download past purchases - Apple Support
    As provided, you cannot merge accounts
    Sorry

  • TS4436 How do I select more than one picture and send them all to Facebook on my iPhone 4s with iso7?

    How do I select more than one picture and send them all to Facebook on my iPhone 4s with iso7?

    Hi, I want to thank you for all your information regarding my questions about sending more than one photo to Facebook. I did have to stop in at Verizon (where I bought my iPhone) to find out why I did not have a choice to choose Facebook with the export icon. The tech had to go into my setting and enable Facebook to recognize my iPhone. When I upgraded to iso7 somehow it could not recognize Facebook. Once he did this for me I was able to follow your advice and your answer solved my question. Thank you

  • How can I use more than one iphone and keep contacts separate?

    How can I set up more than one phone and keep our contacts and messaging separate?

    Use separate Apple IDs for iCloud on each phone.

  • Adding music to more than one slide and not the entire presentation

    I love the way Keynote looks and behaves, but it fails to compete with PPT on certain aspects, such as adding the same audio track to more than one slide and NOT have it play for the entire presentation. Using PPT (and I hate PCs!) you can have a track play for "n" number of slides. I'm frustrated that I cannot do this with Keynote! I don't want the track as a soundtrack for the entire presentation. I want to add another audio track to, say, the last two or three slides only and something else for all the other slides. I looked through the user manual, forums, etc. and found that I can only add a soundtrack to the entire thing or a different audio to only one slide.
    Question: What if I cut (that last two slides) and paste the the slides as a new Presentation with its own soundtrack, then reincorporate that back and paste it into the original presentation? Will that work or will the original soundtrack take over the entire presentation again?

    Anyone remember Claris Works for Mac back in the early 90s? Now, that was a gem! What were they thinking when they got rid of that one (and replaced it with AppleWorks!)?
    Good point, but one which Apple has heard a zillion times, and so sadly chosen to ignore. The really heartbroken among us remember AppleWorks from the mid-'80's, the world's first integrated suite, then ClarisWorks, then AppleWorks; and, of course, Beagle Bros. and BeagleWorks. But since we old f*s are dying off, those complaints will eventually stop. +Sic transit gloria mundi.+

  • Can I update more than one iPad and iPhone from the same MacBook pro?

    Can I update more than one iPad and iPhone to ios 5 from the same MacBook pro? Our family has one MacBook pro and several iphones and ipads.  No one wants to lose their iTunes music or contact list or calendars.

    Yes, but you will want to think it through before you do it.
    The computer will become the "master" device, holding the definitive collection of music, photos, contacts, etc., and each iPad or iPhone will get a copy of what's on the computer. So if  everyone has different collections of music or photos that you all want to keep separate from each other, you'll want to set up different accounts on the MacBook Pro. To do that, go into "System Preferences" and click "Users", then click the "+" to create a new account for each person who needs their own set of files.
    That way you can each log in to your own MacBook account before you sync your iPhone or iPad, and everyone has their own copy of iTunes and their own iPhoto. If you happen to plug in an iPhone while logged into someone else's account, you just click "don't sync" (the 1st time only, it will remember after that). Sharing the same files becomes tricky, so this is only the best method if you want to keep things 100% separate.
    On the other hand, if you all have your music and photos mishmashed together on the MacBook anyway or just don't care about keeping things separate, just go ahead and sync your iPhones and iPads without setting up new accounts. But in this case, you should create playlists and photo albums in iTunes and iPhoto. Then plug in an iPhone, click on it's icon in iTunes, and change the settings for Music, Photos, etc to only sync the playlists that you want on that device. Repeat for each one. They'll all remember their own settings, and continue to sync with their designated playlists or albums.
    What you cannot do is use more than one computer with a single iPhone. That will wipe out the music and photos that were on it already, replacing them with the ones on the second computer.

  • Simultaneously read more than one input and generate output

    Is it possible To simultaneously read more than one input and generate outputs depending on these inputs? If this isn't possible what is the best way to go about making some sort of timed loop that will read an input, read the next input, decide whether or not to output and so on. Hope someone can help. Thanks.Message Edited by Esmith13 on 05-25-2005 01:36 PM

    Hi,
    You should look at the synchronized examples for analog input and output that can be found in the example finder under:
    Help>>Find Examples>>Hardware Input and Output>>DAQmx>>Synchronization>>Multi-Function
    These will get you started to being able to handle multiple tasks at the same time.
    I hope this helps. Have a Great Day!
    George

  • I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

    I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

    Hi Eva B.,
    Please refer to the help document below:
    Adobe Store | Online order and payment FAQ
    Regards,
    Sheena

  • Can't add a goods-issue with more than one item and one is serial managed.

    Hi,
    We are trying to issue more than one item to a production order using the DI API.  If none of the items is serial managed, they all are accepted and the goods-issue Add is successful.  If one the items is batch-managed, the goods-issue Add is also successful.  I am able to add the goods-receipt if I it contains only one item and it is serial-number managed.  However, if I’m issuing more than one item and one or more of the items is serial number managed, then the DI API will not add the goods-issue.  The error message that appears refers to an item that is not among the items being issued.  The message is:
    -10: (IGE1.WhsCode)(line: 3), ‘Item ‘A00006        ‘ with system serial 1 is not in stock.’
    Again item A00006 is not even in the group of items being issued.
    The code I am using for the serial number part is:
    With oGoodsIssue.Lines.SerialNumbers
              .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
              .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
              .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
              .SetCurrentLine(n)
              .Add()
              rs.MoveNext()
              n += 1
    End With
    The rs is a recordset that the code is looping through as the serial numbers are being added.
    The error message does not occur during this code.  It occurs when it tries to add the full goods-receipt.  Does anyone have any idea how I can fix this?
    Thanks,
    Mike
    Edited by: Mike Angelastro on Mar 31, 2008 8:43 AM

    Hi Mike,
    Try to do the ".Add" only if you need it. Doing a ".add" without assignation may cause the error you have.
    I guess your n variable start at 1 or 0, so you could put code like this :
    With oGoodsIssue.Lines.SerialNumbers
    if n = 0 then (or 1, also I don't the correct syntax of your programming language)
    .Add()
    end if
    .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
    .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
    .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
    .SetCurrentLine(n)
    rs.MoveNext()
    n += 1
    End With
    HTH
    Jodérick

  • I downloaded Adobe Acrobat X in 2010 and then a few years later I got a new computer and I would like to install the Adobe Acrobat X on my new computer but I cannot tell if I had more than one license and my Adobe account is not showing that I ever downlo

    I downloaded Adobe Acrobat X in 2010 and then a few years later I got a new computer and I would like to install the Adobe Acrobat X on my new computer but I cannot tell if I had more than one license and my Adobe account is not showing that I ever downloaded or ordered anything.  Can you assist?

    Download/install it from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html and activate it with your serial number.

  • How long does it take for the IOS 7.1 to finish updating? My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

    My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

    Depends on how strong your wifi connection is.
    you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

Maybe you are looking for

  • Why do I get a blank white screen on wakeup from sleep?

    When my iMac wakes from s sleep lasting more than 10 minutes, I get a completely white screen. Everything is working well: when I move the cursor to the screen bottom, my toolbar appears, and when I click on an app icon, the part of the screen in and

  • Why can't I see the individual .jpegs in iphoto library?

    First off, I would like to apologize to the group in advance if these question have been asked 1000 times!!! I didn't see an answer when I searched the forum!! #1 Can someone tell me why I can't see all of the individual .jpegs in the Iphoto Library

  • How to trim spaces in SQL?

    Hi there, I have installed Oracle XE on my machine and have populated it with some data. In one table,namely the Id column i noted there are spaces before the actual code. For example _ _ _12345. My question is, how do i removed these spaces? I am us

  • I cannot open this spreadsheet:  runninglog.xltx.cpgz  how do i open it?

    I installed Templates for MS Office.  I want a spreadsheet for my workouts.  How do I open runninglog.xltx.cpgz Thanks.

  • FBS1 Creating Mass upload

    Is it possible to create a Program that can create multiple Accrual Documents from an Excel Spreadsheet. We have tried LSMW to upload but when it runs into a batch then it shows an error saying that STGRD is not an input Field.