Posting with FBV0

Hello All,
we are using FBV0 for posting documents which are parked using FV50,FV60,FV65 and FBV1.Reason for using FBV0 is,not to allow anybody to change the documents before posting.but after we go into FBV1 and display all the documents list when we double click on any documents that were parked using FV50,FV60 and FV65 then we get the message that we are not authorized to use these tcodes but when we click on the document that parked using FBV1 we were able to change the currency amounts for that document before posting..by the way we have a custom program which uses FBV1 for parking the documets..
Is there any way to park documets without using FBV1(our FI person told that SAP has provided only FBV1 for parking documents in batch input mode)...or can we restrict it not to open in FBV0..
Any help would be appreciated.

I am not sure if i can help you with this, but i sugget you have a look at the thread 415250 in ABAP development==> ABAP General
make a search on the number for the past year and you will find it

Similar Messages

  • Problem posting through FBV0 with BTE enhancement

    Dear Gurus,
    I created BTE enhancement event 1030 in P/S modules.
    The BTE program used to post another document after original (standard) document is posted.
    If we post directly without park, the document all posted successfully.
    So when the document is parked through FV50 or FV60 and then post with FBV0.
    But when we use FBV1 and F-65, then post FBV0 it raised error: No batch input data for screen SAP***
    This error apparently because we commit document while updating document park (from parked document to posted document in BKPF).
    this symptoms found when we use BAPI_ACC_DOCUMENT_POST or BAPI_ACC_DOCUMENT_CHECK.
    the only way making both document (standard and BTE doc) posted is to call BAPI_ACC_DOCUMENT_POST in background task.
    But we can't get the message in return parameter.
    I try to use function AC_DOCUMENT_DIRECT_INPUT then the error change into "UPDATE ERROR FBVB".
    I change the BTE event to Process Module 1140, results the same.
    The question is, can we post another document using FM and commit during standard updating routine in SAP?
    Is there another FM/method i could use to post another document while posting park document FBV0?
    Really need your help.
    Thanks,
    Tiara
    Edited by: tiara astari on Nov 24, 2009 8:14 AM

    Hi,
    Maybe it could help.
    When you do a POST document in asyncrounous update, try to use IN BACKGROUND TASK.
    In your case, when you call function BAPI_ACC_DOCUMENT_POST add statement IN BACKGROUND TASK.
    like this
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST' IN BACKGROUND TASK
    IMPORTING
    EXPORTING

  • Error while posting with Tax code

    Dear All,
    I am getting the following error while i am trying to post with a tax code. Can someone tell me what could be the issue?
    Customization for RIL j_1iindcus missing in table
    Message no. 8I303
    Diagnosis
    The customization details have not been maintained for this company
    Procedure
    Please use the localization IMG or Global settings
    to maintain the company settings
    Regards
    Suresh

    Dear Suresh,
           If  you are using versions below 4.7 execute T_Code <b>J1IT</b>, go to <b> India Localization Menu->Global Settings->Company Settings</b> and add an entry for your Company Code and save.
           If you are on higher versions use the following path:
    <b>SPRO --> Logistics - General --> Tax on Goods Movement --> India --> Basic Settings --> Maintain Company Code Settings.</b>
    This should solve the issue.
    Kindly let me know if it was useful.
    Regards,
    Mary Sofia

  • Unable to clear open items through post with Clearing F-04

    Hi Experts,
    I want to clear one GL code through transaction F- 04 Post with Clearing.
    When I clear the open items throgh f-04, (Document types UA , KR , MJ ) it posts the document but again it makes a new line item as a open item with same amount.New line item shows in a list as a open item. ( I tryed F-03 as well)
    I am unable to unable to understand the exact functionality of transacion F-04.
    Can anyone explain me please ? Please advice if I am missing anthing on this.
    Thanks,
    Manasi

    Hi Manasi,
    As the name suggest, F-04 allows you to POST to one account by CLEARING another account.
    For example you have a provision account which needs to be adjusted when the actual expense is paid -  this how it will be done -
    Give the document header details, select "Transfer posting with clearing", enter the posting key (40), give the GL account (expense account as per the example) and go to the next screen.
    Give the amount and other details for the line items and then select "choose open item" from the menu. The new screen will ask you to give an account where you will give the provision account (the account from which the open item needs to be cleared).
    Press enter and you will get the list of open items for the GL account from where you can proceed like any other clearing.
    Hope this clarifies. Do revert in case of any further queries.
    Thanks and Regards,
    anit

  • F-04 post with clearing

    Hi,
      I have made 2 jv transaction posting in fb50 those are reflecting in fbl3n as open items but if i want to clear it through F-04 post with clearing those line items are not appearing pls suggest the solution what might be reason for the same.
    waiting for early reply.
    Regards
    Pramod

    Dear Satwik,
    ever doc. have 2 ways to clear
    1) post with clearing
    2)post with out clearing
    post with clearning : if u have a invocie and u r passing the payment for that invoice if u chose post with clearning system clear the invoice against that payment.
    2)post with out clearning: if u have a invoice and ur passing gthe payment for that invoice if u chose post with out clearning that time system is not clearing the invoice amount
    and its showing as 2 line item one is invoice and 2nd is payment line item, after that u can clear both line item against each other
    Regards
    radha

  • RANT: Please post with a meaningful subject line

    This is an SQL and PL/SQL forum. Almost all posts will be people needing help with a query, or in a PL/SQL procedure, so subject lines like
    Stored Procedure
    Please share your valuable experience
    Need help on the below query
    error while running PL/SQL
    Query
    Help need in this query
    PL/SQL
    Query - Help
    Help
    are essentially meaningless (those just in the last few hours).
    If you're getting an error, put the error in the subject line.
    If your query is slow, first read When your query takes too long ... and if that doesn't help then post with something in the subject line to indicate it's a performance related question.
    If it's a "how to" question, use that e.g "how to calculate a rolling average".
    Oh, and if your question is how to find the second highest salary in the department, don't bother posting at all.
    Just a pet peeve brought to a head by this morning's threads.

    Agree and disagree with your comments APC.
    Yes, the clueless and unwashed will not even bother reading this posting - just as they will not be bothered by using a totally meaningless subject for their posting.
    But, I do not think we should simply 'let it be' (only John/Paul made that work and in a song). The forum is what we, the members, make from it.
    I think my continual rants on using "urgent" for a subject header have made a difference and many "got the point". So I do not see Dave's rant as pointless - simply addressed at the wrong audience. He should instead post a small rant to an applicable posting and "spread the message" that way.
    As for what we choose to read and not read.. some of us are here because we want to help. And a poster with a meaningless subject has a lessor change of getting his/her posting read by those who want to help.. as it is simply a nameless problem amongst other nameless problems.

  • Recurring Posting with Tax Code

    Hi Experts,
    When i am trying to execute a recurring posting  with some Tax Code system is giving error "location is missing".
    So kindly tell me is it not possible to execute a recurring posting with tax in SAP Business one
    Thanks in Advance

    Hello,
    You should try directily select your reccuring template on JE form, because form also have  Location fields  in header and row level.
    Actuly tax info(Sales tax information) totally depend of what is location you have selected.
    then you will find easly your issue.
    Thanks
    Manvendra Singh Niranjan

  • While  F-92 posting with T type 210 not possible  (No acquisition posted)

    Hi
    Asset Retirement Not Possible
    We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
    I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
    Posting with trans.type 210 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    Ajay
    yes we are using Group Assets for income tax depreciation
    when checked at AS83 no values found under taken over value for the group asset
    ***. aquistion val  - 0
    and all other values are zero
    Edited by: johnrambo on Oct 4, 2010 12:09 PM
    Moderator: Don't repost threads which were locked by moderator

    Hi
    As I said, go to AS82 and upload the Income tax values for this group asset....
    Unless you do that, system wont allow you to proceed.. May be you can enter a nominal value if it is important to sell the asset now and later on correct it
    Regards
    Ajay M

  • Error : Posting with trans.type 200 not possible (No acquisition posted)

    Dear All,
      Iam getting error while doing asset retirement thru ABAVN. Error is mentioned below. Pls do the needful.
    Posting with trans.type 200 not possible (No acquisition posted)
        Message no. AA324

    Dear Bird,
      Already asset has been posted , but then also it shows the same error.
    pls help on this.
    regards
    Ranjit..

  • Data inconsistency: posting with restricted transaction type (FAA_POST047)

    Hi colleagues!
    I have the following error:
    Data inconsistency: posting with restricted transaction type
    Message no. FAA_POST047
    Diagnosis
    You are trying to post in company code 1000 with transaction type 130 in ledger group 0N. According to table TABWA, this transaction type is limited. Nonetheless, according to your entries, you want to post to area 11.
    System Response
    Using limited transaction types is obsolete and would lead to an inconsistent posting in this situation. The system rejects the posting.
    Procedure
    Use a transaction type that is not limited. And, if possible, choose the ledger group and/or depreciation area on the initial screen.
    According to specific accounting we shouldn't post to one of the depr. area, so most of the tr.types are restricted to post to all areas except this one.
    Because of this, posting from MM with acc.assignment 'A' is impossible - I have this error.
    Any ideas how to solve?
    Thanks in advance

    Hi Anton
    This looks like your transaction type -130 is limited to post only in ledger group-0N as per the transaction type configuration. Due to which system is unable to post all the ledgers and hence this lead to inconsistency.
    Please verify the transaction type 130- in configuration T code - OAYA and see if it is restricted by depreciation area (eventually allow to post only ledger group- 0N.
    Tcode - OAYA (Limit Transaction Types to Depreciation Areas)
    please verify and let us know the update. hope this helps
    Best Regards
    Jomon

  • Asset Retirement (ABAON) error - Posting with trans.type 210 not possible

    HI All,
    I was trying to sell an asset using transaction ABAON which is fully depreciated, but I am getting the error -
    " Posting with trans.type 210 not possible (No acquisition posted)"
    The Scenario is, there is an asset(car) which was uploaded during implimentation and it got depreciated fully in the month of april.
    The same asset(car, which is fully depreciated) is sold for an amount of Rs 40000/-.
    So, I was trying to post it with some revenue vlaue in transaction ABAON, but I am getting the above error.
    (The Asset value was an uploaded during implimentation,it was not an acquisition value from SAP. It was an uploaded value from legacy data)
    Could any one help in this, or let me know the correct process for this kind of transactions.
    Awaiting for a reply.
    Regards,
    Upendra

    HI Mamta,
    Thanks for the reply.
    While Uploading the data was uploaded as asset balance upload for prior year with value.
    Plase let me know what do you propose, to be done for this.
    Regards,

  • FI _AA errr Posting with trans.type 210 not possible (No acquisition posted

    Asset Retirement Not Possible  
    Dear,
    We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
    I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
    Posting with trans.type 210 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    Can anyone Help on this topic
    Regards,
    rambo
    deleted
    Moderator: Please, search SDN*

    Hi Rambo
    I think you are using Group Assets for income tax depreciation
    If yes, have you uploaded values into Group assets from AS82? Can you please check this and revert
    Regards
    Ajay M

  • MIRO error Posting with trans.type 159 not possible (No acquisition posted)

    Hi,
    I have the following probem while doing MIRO.  Would appreciate if someone could help.
    Error in Purchase invoice posting MIRO  :-
    The user has created a PO for asset in  FY2010 and has performed a MIGO in FY2010.
    Now in FY2011 the user tries to  invoice against the  above asset and wants to post it thru Trans MIRO.
    System gives an  error during MIRO  "Posting with trans.type 159 not possible (No acquisition posted)"  Message no AA 324
    Trans type 159 has trans type group 12 attached to it.
    MIGO can not be reversed  because it belongs to the closed FY.
    Please help

    Hi
    refer notes 1526247 and 1507808... Though it relates to Japan, but the issue is same
    Br, Ajay M

  • ASSET TRANS-Posting with trans.type Z30 not possible(No acquisition posted)

    Hi Experts,
    Am creating a sub asset 001 for my_asset_1, via 'BAPI_FIXEDASSET_CREATE1'. Fine.
    Then, am trying to post the Asset transfer for my_asset/001 by using a BAPI of  'AMDP_BAPI_CALL_ON_TRANSACTION'.
    But, am getting the Error(via ABUMN am NOT geetting any ERROR)- <i><b>Posting with trans.type Z30 not possible (No acquisition posted)</b></i>
    Am passing paras, like,
    so, pls. clarify that,
    1 - Wht is the meaning of Error message am geeting?
    2 - How to fix it?
    thanq.
    Message was edited by:
            Srinivas
    Message was edited by:
            Srinivas

    closing, bcoz, did not get good answer

  • MIRO - Posting with trans.type 159 not possible (No acquisition posted)

    Hi all,
    I have a case where an asset PO was created with multiple account assignment in one line item.  For example, purchase 10 pc of printer with 10 asset numbers specified in the account assignment tab.  By standard SAP, the GR is non-valuated.
    The GR of the PO was done in the previous period.  Now, when the invoice is to be posted thru MIRO.  The system generate error message to me.  The error message is "Posting with trans.type 159 not possible (No acquisition posted)" and message number is AA324.
    The reason of this error is due to no acquisition date in the asset master.  GR is non-valuated hence, the acquisition date is not populated in the asset as well.  I believe this is quite a common problem.  Kindly advise any workaround solution.
    Thanks.
    Tom

    Hi
    refer notes 1526247 and 1507808... Though it relates to Japan, but the issue is same
    Br, Ajay M

Maybe you are looking for

  • Crop tool doesn't work in Save for Web GRRRRRR

    Hi, I'm working with Illustrator CS3 and seem to have a problem with the crop area tool. When exporting an image in "save for web", however, Illustrator just ignores the settings and crops to the artboard. Is this a know bug? Or my computer going nut

  • GL cost batch informations

    Hi Cost batches are posted into GL, Now we have a requirement to find all individual transactions information which are in cost batche. Regards Kishore S

  • What are the pitfalls of transferring my iTunes library to an external hard drive

    I have acquired more music on an external hard drive than will fit on my computer or my iPod.  I am looking to transfer my iTunes library to the external drive.  Will I be able to add purchases or rip more cds to the hard drive without incident?  Doe

  • Dimensional hierarchy in OBIEE 11g

    Hi guys, I have are quirement to build a pivot table using a star schema. I need to drill down from one dimensional table column to another dimensional table column. lets say D1, D2, D3 are the dimensions and F is the fact table. in D1 there are colu

  • Intractive report with region alignment (Left to right/Right to left)

    i have two lanugage support apex application.i chnaged the page>region>Page Template Body (3)>Region Header in each launguge page. <b>the problem is the Searching BAR is not switching ....and Breadcrumbs also </b> <div class="uRegionContent clearfix"