Power botton problem
why do my ipod touch 4g power botton stuck one day?
Power flashing on the router can be caused by power interruption or a corrupted firmware. Try to unplug and re-plug the power adapter of the router for a minute. If that will not fix the power flashing issue, plug it to another outlet for isolation. If it is still the same thing, I believe then that you will have to reset the router back to factory settings by pressing and holding the reset button down for 15 seconds and unplug the power cord for a minute. If the power stays solid after that, access the setup page and check if the firmware needs to be updated. You can download the firmware for free from the website: http://support.linksys.com/en-us/support/routers/EA3500.
Similar Messages
-
After ios upgrade to 7.0.4 i got power botton and no sim problem need help help
after ios upgrade to 7.0.4 i got power botton and no sim problem anyone having this problem?
Installing an iOS update does not add a physical button.
As for the "No SIM" message, try removing and reinserting the SIM or replacing the SIM. -
so i have a 4th gen ipod touch and my power botton got stuck. is there anyway to fix it besides sending it in or buying a new one????
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
power botton not working after restoring my iphone 5 i change the power and volum flix cable 2 times and still not woking i am sure it's not hardwear problem so i restore it agine and still as is it nothing change i fix the old organel voluem and powe cable on my other iphone it work
As you've opened the phone yourself, you have voided any support from Apple including this forum. I suggest you bring it to a 3rd party iPhone repair shop or contact ifixit.com
-
SOMETIMES POWER BOTTON TAKES TIME TO WAKE UP PHONE
SOMETIMES THE PHONE TAKES TO MUCH TIME TO WAKE UP WITH THE POWER BOTTON WHEN I LOCK MY SCREEN I HAVE UPDATED TO ANDROID 4.4 AND STILL HAVE THE SAME PROBLEM.
You could try performing a system repair using Pc Companion as this will often fix issues however this will factory reset your phone
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
Should that fail then you need to either return your device to the place of purchase or contact Xperia care http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman -
My question its how to fix an ipod nano 7g witch power botton doesnt work, some times when push it repeatly it start work, but short time it stop working again, and id like to name if it is problem with the software or with hardware. So glad all the help you can give me.
hollmr30, is this the same phone you reported in another post that was dropped into a swimming pool? If so, it's most likely damaged, and will need repairs...
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
my iphone fell on the floor and the power botton wont work and also the screen went black i already tried to reset it throun itunes but the phone did not connect and i dont know what to do
You can take it to Apple and get replaced as long as you pay for the replacement.
Allan -
power botton on macbook does not work?
maybe it's time for a new keyboard?
The rest the keyboard works fine.Maybe you should ask about your "botton" in the macbook thread.
-
How to remove passcode from ipod touch 3g if power botton is not working?
how to remove passcode from ipod touch 3g if power botton is not working?
Use this program to place the iPod in recovery mode so that you then can restore the iPod via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
A couple of weeks ago I installed quite a few of the patches in the recommended list.
Since then, I get the following message repeated continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the power.config file and in the startup scripts, but couldn't find any reference to "DPMSSet." Any ideas on the cause and solution of the message?
I never use the powerd daemon, so killing the process seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected] -
Hi, I'm a macbook pro user but recently my macbook just spoiled, i though was my power adapter problem because when i charge my mac battery that is depleted, it shows a very dim light and my mac just won't start up, even i bought a brand new 80 euro power adapter it still give out the same result.
when I switch it on, the little led light it up and u can hear the fun running and after 5 to 10 seconds switched off again / ive got all my recordings in there
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller (SMC)
in really disappointed with apple,
Serge... you are aware that you are responsible for backing up your importanta data correct ? -
Power supply problem a little better after unplugging imac for 24 hours
Hello,
I'm currently having power supply problems (at least I hope it's the power supply and not the mother board), similar to many others I've seen on these boards. What I've noticed is that if I unplug my iMac for about 24 hours I can get it to run again for a little while. Unplugging it for a few minutes (or even 8 hours) doesn't seem to help. My iMac won't get much further than the starting chime before it loses power. But it seems to me that unplugging it for 24 hours has gotten me between 5 days to 5 hours of use before I unexpectedly lose power.
Is there anything to account for this or am I just imagining things? Ultimately, I don't think the answer will help me much, but I am curious to know. I'm taking my iMac to a Mac Genius tomorrow to see if they can help diagnose the problem. I saw a little hit in my video today, which was a first, so I suspect the problem may be getting worse. I'll probably be buying a new power supply soon.I'm having the same problem. They say to restart you have to unplug the power, wait 10 seconds and then plug it back in but apparently it's not enough. I have to unplug for about 30 seconds, plug back in, and wait anywhere from 30 minutes to several hours before it'll start up again properly. The last time I had this issue was in october '06- when I had a new logic board and power supply put in. Now I'm worried because my applecare is expired by about 3 months. I bought the computer in feb. '05. I hope a new board doesn't cost more than what the computer itself is worth but I'm afraid that'll be the case...
-
I have power ic problem in my iphone 4s. please tel me the solution
i have power ic problem in my iphone 4s. please tel me the solution. thank you
The chargers for the 3GS and 4S are the same. That's not your problem, unless they are both defective.
Plug it in to mains power for at least 15 minutes. If it doesn't automatically come on, try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings. -
Power up problems on my HP 7520 all in one printer
My HP 7520 e powered down whilst in the process of printing. when the power pack is disconnected from the printer and powered back up from the mains supply a green light shows on the actual power pack. when the power pack is connected to the printer the power fails immediately.
Hi , Welcome to the HP Forums! I noticed that you are having power up problems on your HP 7520 all in one printer. I am happy to look into this for you! Please try the steps within this guide, The HP Printer Does Not Turn On or Respond When the Power Button is Pressed. As it deals with power related issues. (Even though the guide title may not match your issue, I believe the solutions will help.) Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”
-
Hi guys,
So the problem with my laptop is that when I press the power button, the power button itself and the two leftmost lights below the touchpad- power and battery- they light up for a second or two. But the laptop doesn't start up and the lights go off. If I long press the power button, the laptop starts, though.
Now this is not a severe problem as of now, I know. But I'm pretty sure this will escalate into something else. Does anyone know what the problem actually is and what I can do to solve it?
P.S.: Unlike people with power button problems, I didn't do anything with the hardware or software.Hi Sanjana,
Welcome to Lenovo Community!
I’m sorry to hear that the Power button is not working as expected in your G750 Laptop. I would suggest you to perform the Flee-Power, below are the steps to perform the same:
Remove the battery and any other peripheral device connected to the computer.
Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.
If the issue persists even after performing Flee-Power, I would suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Maybe you are looking for
-
Hello, I received my new screen for my Ipad 1. Got everything apart having trouble plugging in the digitizer flex cable. Don't want to damage it. Please help. Joe
-
Formula that checks drop down list and then sums
I have a table with a drop down list with two values: '$' and 'Hr' (cell called 'PType'). There is a cell called 'Proposed' that contains numerical data. The table is dynamic and can have more cells inserted via a button within the row. I have a to
-
I am wondering why that I can not add my music and photos from itunes to my I phone 4s. I have been given this message : You don't have enough access privilages for this operation.
-
Essbase excel plugin error - "essbase uniquyfyforuser failed to get.."
Hello Everyone, I have Hyperion and Essbase Fusion Edition installed in the same machine. Whenever I open a new instance of excel, I get the Hyperion (Smart View) addin, but I do not get the Essbase Plugin. Instead I get the following error message:
-
Can't use "Place Linked" or "Place Embedded" or "Open" after upgrading to Yosemite and PS CC 2014
When I go to File > Place Linked / Place Embedded / Open it isn't working anymore after upgrading to Yosemite and PS CC 2014. If I drag a file to Photoshop, I can open it that way, or by using "Open Recent". I've tried going to the folder "Adobe Phot