Power button not working on iPhone 4s then starts to work

Power button stopped working for a while then started working again. Has not happened before...

OK, thanks for sharing.

Similar Messages

  • Hi i would like to know when i am using Mozzilla it keeps saying (not responding ) and freezes up then starts to work again only to continue doing the same thing over and over ...

    this has been happening now for a couple of days just freezes and stops then starts again when i close it down comes back with an OOPS PROBLEM AND TO RESTORE OR START A NEW SESSION SCREEN

    Hi stuey1153
    I would try two things first clear your cache. [[How to clear the cache]]
    Then if that doesn't help start in the [[Safe Mode]] , an easy way to start safe mode is close Firefox then press shift while clicking the Firefox icon it will open in the safe mode.

  • Iphone 5 power button not working!! They have replacement program for months but why they dont email you and say it??

    I have had iphone 5 and have never been happy and i think apple is not leading the technology and future of market anymore as they are lowering quality of their products(even hardware). I had to change first iphone 5 i had because of wireless issues and then i had battery problem  and had to charge 3 times a day and finally after 2 years i bought they decided that its faulty and they decide to change it. Luckily enough i read it on an online tech magazine and after googling i see that they have had replacement for power button as well which i am eligible for as well!! i go to genius bar and they replace battery but they dont replace power button cause they examine it and passes till the audio dock test! It connects to charder dock or cable but it doest to audio test dock and he says one off the pins inside is not right but it charges perfectly with every cable in the store!! And i tell him that they have to change power button not the charging pin cause it doesnt make sense!! Its a faulty product and maybe if they emailed and said it nearly a year ago my pin was right then!!  so i think they found a silly reason not to change it and so i am struggling with that phone and brand  that i hate(once i used to love)!

    ahmetfromlondon63 wrote
    And I don't know what these guys are talking about? I have an unsolved hardware issue and I posted here!
    This is a user-to-user technical support forum. This is not AppleCare. You are not addressing Apple here. No one here can help you resolve your customer service issue with Apple. Use the Contact Us link at the bottom right of every page for information on how to contact Apple directly. When you talk to them, I'd suggest not using profanity. It makes people less likely to help you.

  • Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

    Hi,
    Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

    Read here:
    https://ssl.apple.com/support/iphone5-sleepwakebutton/

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • HT1688 Power button not working

    Power button not working on iPhone 5

    This is a defect on iPhone 5 power button that wears out in about 13-14 months of usage just after you go out of warranty. Apple is aware of this issue but chooses not to accept this as a defect. I asked the Genius bar guy and they told me this is a common case recently and costs $269 to replace your phone. There is no repair option. I am very mad and believe Apple needs to take action or will lose their customers. All iPhone 5 owners that I know started having this problem in the month of 13 -14.
    I believe if the numbers go high, Apple may start a recall program. Please encourage anyone with this problem to post here. $700 phone should not wear out this soon. Apparently the part is defective on almost all iPhone 5 devices.
    Other threads about this:
    https://discussions.apple.com/message/23797113#23797113
    https://discussions.apple.com/message/23258974#23258974

  • Power button not working

    iPopd touch 4th generation sleep/power button not working.
    Any ideas? how long is warranty?

    The standard warranty is one-year. Yu can purchase, before the one-year is up and additional year. Yu can check your coverage here:
    Apple - Support - Check Your Service and Support Coverage
    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Hi All, I'm using an Iphone 4. Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes Home button   power button  it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugg

    Hi All,
    I'm using an iphone 4.Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes +Home button +  power button  it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugguest.
    my os version: 4.2
    Firmware: 02.10.04

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do

    My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do I do?

    You have a HDD problem (hopefully you have a backup).  Start with the information on this support article:
    https://support.apple.com/kb/TS1440
    Ciao.

  • Every time i connect my iphone to itunes and trying to do a backup or get the new update it says i have to restore my iphone. and then that doesnt work, i tried to reinstall itunes but it doesnt work. i get this all the time. fix it please.

    Every time i connect my iphone to itunes and trying to do a backup or get the new update it says i have to restore my iphone. and then that doesnt work, i tried to reinstall itunes but it doesnt work. i get this all the time. fix it please.

    iTunes states " There's a problem with your Iphone, please contact apple service center " Also i took my iphone to a local service man and he told me the IMEI code has been corrupted and there's nothing that can be done about it. Please help, if you have any solution.
    Thank you

  • I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    Hi, M_ghaderi.  
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Hey apple users. if i deaktivate my iphone because i got a new phone, can someome else put thier sin card in my old iphone and then it will work again? or does the phone stop working all together if i deactivate the phone on the support page?

    hey apple users. if i deactivate my iphone because i got a new phone, can someome else put thier sin card in my old iphone and then it will work again? or does the phone stop working all together if i deactivate the phone on the support page?

    Do this first:
    http://support.apple.com/kb/HT5661
    Then whoever gets the phone just sets things up again using their Apple ID.

  • When i press power button i hear several click sounds before start up?

    When I press power button I hear several click sounds before start up begins. Shortly after Apple logo appears it clicks off.

    Which MacBook Pro do you have? If it has an optical drive then that is just the optical drive checking if there is a disk inserted.

  • Power button not working iphone 4s

    My iphone 4s running on 6.1.3 power button is not working has not been dropped or in water. Can someone help me fix this?

    All I could find was this
    Buttons and Switches
    Sleep/Wake button will not lock or unlock iPhone
    To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
    To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
    If either of the above steps don't work, try turning iPhone off and then on again.
    If the iPhone will not power off, reset it.
    Try to lock or unlock the phone.
    Not sure whether it really helps you but I mention it for what it is worth

  • IPhone 4S power button not working (feels stuck)?

    I have an iPhone 4S and the power button isn't working. It seems stuck and I can't turn my phone on and off. Does this qualify for a replacement? Also, does apple still replace the iPhone 4S in 64GB (my current model)? Thank you! I'm new here on the forums so I hope I picked the right category for this question.

    Hello angelbite11687,
    Thanks for using Apple Support Communities.
    Follow the steps below to troubleshoot this issue with your lock/unlock button.
    Sleep/Wake button won't lock or unlock iPhone
    To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
    To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
    If either of the above steps don't work, try turning iPhone off and then on again.
    If the iPhone will not power off, reset it.
    Try to lock or unlock the phone.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care,
    Alex H.

Maybe you are looking for

  • Help--all the files in my user account just disappeared

    I have a 10.4 Intel Mac Mini with a few different accounts on it. There are two Administrator accounts, one called "bill" and one called "Administrator". The former is my main account I use daily. All accounts on this machine have File Vault enabled.

  • "Cannot open the file"

    Hi. I was working with CS6 when I exported a file to pdf and saved it later this morning. Now I'm trying to open it but I recieve the next message: "Cannot open the file xxxx.indd. Adobe InDesign may not support the file format, a plug-in that suppor

  • Number field problem in forms. It does not allow zero

    Hai all I have two number fields.[ database items]..When i try to insert data ,it does not allow zero in starting position. How can i make this to allow zero in starting position ? For example when i try to insert 02323 in one of the database item ,

  • Cannnot remove host target in Grid Control 10.2

    Chaps, I'm trying to remove a agent discovered in grid. I've done: 1) agent is running 2) removed all database targets, listeners etc discovered in grid 3) shutdown agent 4) tried removing the host from either the hosts or all targets page, but the r

  • WIP Assy Completion -The onhand qty is zero for the selection criteria ente

    Hi, I am trying to do a Work Order-Less completions with Transaction Type as 'WIP Assy Completion', the assembly items are not serial and lot controlled. When i am trying to save it, it throws an error as 'The onhand qty is zero for the selection cri