Power button not working Yoga 11s

My yoga 11s went into sleep mode while plugged in sitting on my desk yesterday now the power button is not working. The light of the power button and the battery are on, but the screen will not turn on.

Dear aanelson03
Welcome in lenovo community
Most probably the issue is with the power adapter . have you tried the charger with another unit if possible .
i recommend to hold on the power button for approx 15 sec and check if the unit will turn on or not .
if the issue still exist so please contact authorized lenovo service center for checking 
Let us know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Power button not working

    iPopd touch 4th generation sleep/power button not working.
    Any ideas? how long is warranty?

    The standard warranty is one-year. Yu can purchase, before the one-year is up and additional year. Yu can check your coverage here:
    Apple - Support - Check Your Service and Support Coverage
    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • HT1688 Power button not working

    Power button not working on iPhone 5

    This is a defect on iPhone 5 power button that wears out in about 13-14 months of usage just after you go out of warranty. Apple is aware of this issue but chooses not to accept this as a defect. I asked the Genius bar guy and they told me this is a common case recently and costs $269 to replace your phone. There is no repair option. I am very mad and believe Apple needs to take action or will lose their customers. All iPhone 5 owners that I know started having this problem in the month of 13 -14.
    I believe if the numbers go high, Apple may start a recall program. Please encourage anyone with this problem to post here. $700 phone should not wear out this soon. Apparently the part is defective on almost all iPhone 5 devices.
    Other threads about this:
    https://discussions.apple.com/message/23797113#23797113
    https://discussions.apple.com/message/23258974#23258974

  • IPod touch 5th gen. Home button stuck and power button not working! Please help!

    I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Power button not working on iPhone 4s then starts to work

    Power button stopped working for a while then started working again. Has not happened before...

    OK, thanks for sharing.

  • Power Button not working on my Zen Mi

    Hi, recently bought a Zen Micro 6GB off Ebay, was brand new, not second hand, unit was fine for month or two until now, the power button isnt working at all. So the only way i can turn the unit on is to plug it into my USB port or to use my charger.
    Any ideas why it might not be working?
    Ive reloaded the latest firmware/bought a new battery/formatted the player (firmware upgrade wiped player) but nothing seems to fix it. Ive not dropped it at all, the problem occured when the player had just been left on a table, no-one had touched it for a day or two and it just decided it didnt wanna work anymore.
    I can still use the player but i have to constantly leave it on incase im somewhere without access to a USB port or charger.
    Oh yeah and because the power button doesnt work i cant get into the recovery mode (as u know you have to hold the power button on)
    So....any ideas whats wrong?
    And will i be able to get a replacement from creative...although i bought it off ebay? I know i wont be able to get a refund or anythin off the ebayer coz its not really their problem.
    ThanksMessage Edited by matt83 on 07-07-2006 03:20 AM

    OK, thanks for sharing.

  • Power button not working headphones not being detected

    have a sony xperia  z tablet, power button has stopped working  and  the headset is not being detected by the headphone jack,
    really annoying i ahve tried resetting and that didnt fix the problem, i tried restorign but cant because the power button doesnt work to shut it down!
    only a couple of months old - need sony to fix the problem, i use it  for work and i need it working 100%! please respond  sony - dont depend on other users to fix your issues also  you have shut down most of your stores in ireland which does not help matters.

    Hi johnboyire,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    With the information supplied, unfortunately if you have performed a software reset and repair on the device then this may be related to hardware, I can only suggest that you contact Sony Mobile within your region and advise them accordingly.
    They will be able to help. Please use the link below to find there contact details.
    http://www.sonymobile.com/global-en/support/contact-us/
    I apologize for any inconvenience this may cause.
    Don't forget to mark posts that answers the topic as Accepted Solution. 
    If you find any post helpful, press Kudos.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Power button not working - officejet pro 8600 +

    Hi,
    I just find this problem today (after 1 year of using my officejet pro 8600+) but maybe, it's normal ....
    When the control panel is opened, the light on the power button is off and the power button stops working (not possible tu turn the printer on or off) but when the control panel is closed, the power button works as expected !! is this normal ?? I just find this issue today.
    Thanks for any answer,
    sincerly,
    Domi.

    Could you provide a few more details?  Do you mean the control panel on your computer?  How is the printer connected - Wireless LAN, LAN or USB?  
    I have never noticed this with mine, but I usually leave the printer on all the time and let the power saving put it to sleep automatically when not in use.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

    Hi,
    Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

    Read here:
    https://ssl.apple.com/support/iphone5-sleepwakebutton/

  • Ipad 1 power button not working

    I dropped some water on my ipad 1 and it was working fine, except that hte power button stopped working. I let it sit there, and dry off, but to no avail. Then I drained the battery but every 30 seconds the symbol where it shows the dead batter blinking shows up without me even pressing anything. So i think that the power button is jammed, but it looks normal.

    Take it into your local Apple Retail Store and have a Genius fix it for you. I recommend scheduling an appointment to the Genius bar so you can avoid wait times. Search your local Apple Store in the search bar on the Apple website, and schedule an appointment.
    HuskieN

  • Iphone 5 power button not working!! They have replacement program for months but why they dont email you and say it??

    I have had iphone 5 and have never been happy and i think apple is not leading the technology and future of market anymore as they are lowering quality of their products(even hardware). I had to change first iphone 5 i had because of wireless issues and then i had battery problem  and had to charge 3 times a day and finally after 2 years i bought they decided that its faulty and they decide to change it. Luckily enough i read it on an online tech magazine and after googling i see that they have had replacement for power button as well which i am eligible for as well!! i go to genius bar and they replace battery but they dont replace power button cause they examine it and passes till the audio dock test! It connects to charder dock or cable but it doest to audio test dock and he says one off the pins inside is not right but it charges perfectly with every cable in the store!! And i tell him that they have to change power button not the charging pin cause it doesnt make sense!! Its a faulty product and maybe if they emailed and said it nearly a year ago my pin was right then!!  so i think they found a silly reason not to change it and so i am struggling with that phone and brand  that i hate(once i used to love)!

    ahmetfromlondon63 wrote
    And I don't know what these guys are talking about? I have an unsolved hardware issue and I posted here!
    This is a user-to-user technical support forum. This is not AppleCare. You are not addressing Apple here. No one here can help you resolve your customer service issue with Apple. Use the Contact Us link at the bottom right of every page for information on how to contact Apple directly. When you talk to them, I'd suggest not using profanity. It makes people less likely to help you.

  • Power button not working like it should...

    When booting up, I have to press power button several times. Finally, when it does come on (Pavilion dv6Notebook), the fan runs quite a bit. I am worried my hard drive is about to go. Any tips?

    Try a soft reset and see what happens.
    If the power button is not working, here is a link for a program that remaps the power button on your TX so you can hard reset and power off.
    There is a program called PowerBtn 2.0. This allows you to turn off the device when the power button does not work. (Thanks to Computerwiz for the info.)
    Click on the following link for the website.
    http://www.canuck-software.ca/
    For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
    http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • Power button not working in Ideapad Flex14

    power button of Ideapad Flex14 is not working, i have to boot using the Novo button.
    the Volume Buttons on the side of the laptop also doesnot work.
    the Windows button the Screen (the windows hardware button on the display) also doesnt work.

    hi bundela,
    Welcome to the Lenovo Forums.
    Just to verify, is the power / volume / Windows button sunk?
    If not, it's possible that the Function Board / Win8 Button Board is malfunctioning and you may need to contact Lenovo for service.
    - LInk to picture
    - Link to picture
    Toll Free No.: 1800-3000-5366  / 1800-419-7555
    Hours of operation: 9AM - 9PM  / Monday - Saturday
    Hope you get the computer fixed soon.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Power button not working on iphone 5

    Power button seems to be not working more than it is. I'd thought it was a poorly fitting case, then I thought it was just intermittent (talk about denial!) Do people think it's a trip to the Apple Shop or is there a quicker, house based solution?

    Hey,
    That is a hardware issue and needs to go to repair centre.
    I had the same issue and when I finally had enough and decided to go to Repair Centre(that was today), i realised that my warranty is over by 6 days.
    I would def get it looked at as soon as possible.

Maybe you are looking for

  • Printing ASCII reports in 3.0

    Hi! I am Prasad. I am currently working with Reports 3.0. I have a peculiar problem. I started a report in Default (Bitmap) mode. The problem is while printing the output of the report. In the default mode it is printing as it is. Later, I wanted to

  • Drawing various types of Graph

    I have a list of vendors along with their Rating % in an internal table . I need to draw a graph for the same . I want to use basic report only . Not ALV . Can u suggest a FM and with that i can draw a graph for the same. If possible can anybody plea

  • Error running ocsinstall.bat

    When I run 'ocsinstall.bat', in step 2 I recive error: === Step2: Importing Portal objects if not exist === === Portal Objects Imported === Error while trying to get Region IDs Do anybody knows how to resolve it?? Thank you

  • Will dvd created in idvd 4 transfer to idvd6????

    I am currently using iphoto/imovie/idvd 4/ thinking of going to ilife 6 (also I am on 10.3.9 - thinking of tiger)....what benefits will I see or will I just encounter a bunch of problems...like those posted. Currrently everything is working fine but

  • Failed. Format conversion is not supported

    Hello again, this error happened when I was playing around with Creative Audio Converter Failed. Format conversion is not supported This error happened when I was converting a song from WMA Pro, 128 Kbps, 44khz, 2 Channel 24-Bit to WMA Pro, 128 Kbps,