Power button on my lumia 620 is quite stiff

Hello!! =]
So, what os happening isn't exactly a problem...
The thing is that the power button of my Lumia 620 is kinda stiff... It works, but I have to put some considerable pressure on it, and it's just the power button.
Is it normal?
Thanks for the help!!!

Hi harukoraharu, 
Welcome to the forum! 
Did something happen to your Lumia 620 prior to this issue? If removing and re-placing the back cover and the battery didn't work, we suggest visiting the Nokia Care Point to have the phone evaluated. This will help verify if the issue is hardware or software related. Just bring the proof of purchase for warranty reference. Note that the warranty doesn't cover physical and liquid damages. Check this link for the Nokia Global page: Nokia Wayfinder
Just let us know if you need further help. 

Similar Messages

  • Lumia 520 wont boot and power button is broken

     managed to break  the power button on my lumia 520 3 days after my misses brought it, was using the camera key to switch on . but after pluging the phone into pc somting went amiss now i have the blue screen and cant hard reset as i have no power button to use in the process.  any ideas how i can get it to boot back up.i was going to try and flash the phone but im not sure which softwere  to use, if any one has a link i would be very greatfull , thanks guys.

    Time to take the phone in for service.

  • Lumia 620 power button

    I passed my 620 on to another family member some months ago, I've just been informed that the power button has stopped working. They say that with the back cover removed the button does not 'click' like the others around it.
    Any chance it could be an Operating System glitch that a phone reset (After backing up of course) might cure? Given the non clickyness reported above I fear its much more likely to be hardware related.
    Any advice appreciated.
    Thanks.

    Hi tullyhubbert,
    Before you consider resetting or bringing your phone to the nearest Care Point, you can try the workaround given on the below link for further isolation of the concern:
    • Side keys do not work in my phone
    In the event that the workaround did not help, you can check Care Point to know the nearest Care Points near you or book an online repair via this link: Send for repair.
    Note: Any physical or liquid damage will invalidate the phone's warranty and sending the phone for repair deletes all the information saved on it. Back up your files to avoid data loss.
    Hope this helps.
    Hi zankar,
    Did something happen to the phone prior to this? You can also try the resolution found on the previously given link. By the way, have you tried bringing it to another Care Point? Is the resolution the same?
    We look forward to your reply.

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • Safari will lock up on my MacBook Pro. Force quit doesn't help. When I try to restart the computer, I get an error saying Safari cancelled the restart. I have to press the power button to shut down the computer.

    While I'm using safari,  it will freeze up. When I force quit safari and reopen it, I find that I'm back to where I was when I did the force quit and safari remains locked up. When I try to restart the computer, I get a pop up that says that safari cancelled my restart. I then press the power button to shut down the computer. When I reboot the computer and open safari, I see all the tabs and windows that were opened when this issue began, only this time safari isn't frozen. This problem started yesterday.
    Has anyone experienced the same problem? Is there a fix for this problem?

    Try Resetting Safari: Open Safari. Cick on the name Safari in the menu bar. In the drop down menu click Reset Safari.

  • I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up.

    I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.

    Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

  • My macbook pro frooze, "spinning wheel of death", I tried to force quit.  When that failed I held down the power button.  Now I can't get by the white apple start up screen, the wheel just keeps spinning and nothing will happen...HELP!

    Again,
    My macbook pro just frooze while on-line.  I got the rainbow wheel spinnin and it wouldn't stop I tried to do a force quit and I was unable to do that.  So I held down the power button.  Now when I try to restart it I can't get by the while page with the apple symbol on it.  All I have is the grey circle spinning continuosly like it is working.  I tried a command S when I started it back up and checked the HD and rebooted, still can't get by the startup page.  Any suggestions?

    I'm having the same problem. I started an automatic upgrade that then got "stuck" for hours. I did a hard shut down and now all I get when I try to reboot is the spinning wheel. I haven't done a backup in 3 months and can't afford to lose everything in a reinstall. Any suggestions?

  • Volume Button Not Working on Lumia 620

    Today my volume rocker switch on my Nokia Lumia 620 stopped working suddenly. It was dropped a couple times today as I was at a concert and people rushed past.
    The volume switch feels spongy when pushed in and only adjusts the volume when pushed down painfully hard. But it happens with both my covers, so I'm maybe wondering if it's an internal hardware issue? When the cover is off, the two small buttons can be pushed down easily, it's just the rocker switch on the covers that don't work. Anyone know what is going on with it? Sent from my 620.

    Hi, Mozilla. Just to clarify, you've tried 2 different back covers on your Lumia 620 and you still experience difficulty pressing your volume keys, right? Only the technicians can confirm if there was an impact on the internal hardware of the phone. Saying this, we suggest taking the phone to a Nokia Care Point for an evaluation and repair: Nokia Support. Please note that the repair process may delete your personal data, so it is best to create a backup file: Back up my stuff. 

  • Nokia lumia 610 power button problem

    Hi,
    It has been more than a year since i have been using my nokia lumia 610 but from few days i have been experiencing a problem with my phone . sometimes power button becomes too sensitive and it becomes like a touch button , Also , it turns off by itself And while starting , it reaches upto nokia logo and then vibrate and turns off.
    now phone working fine, "this problem started when my phone fall down like 50 cm high to ground".
    Please help me, Thank you in advance.

    Hi wiise9,
    Welcome to the forum! 
    We can't verify yet if the issue is hardware or software related unless confirmed by Nokia authorized technicians. Just keep monitoring the phone's performance. If the issue happens again, best to try the troubleshooting steps shown at this link first further isolate it: Your Windows Phone 8 doesn't work or respond as expected 
    Let us know if you need further assistance. 

  • My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.

    My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.  Because of this it makes it tough to put my phone on speaker or type in my v-mail password.

    I've been trying to find a common denominator. It happens inconsistently. It never happened before the Denim update. When it does occur, the screen goes black immediately upon answering the call and doesn't come back until the call is ended by the calling party.
    I thought it might be the proximity sensor, but when it's working normally I can see the screen go dark when it's at my ear and comes back when I take it away (tried it multiple times). I had Gestures Beta installed. I wondered if that could have an affect so I uninstalled it, but that didn't make any difference. I'm still stumped by the inconsistency. I haven't reset my phone as I didn't really want to go through that...

  • Lumia 620 buttons failure

    First of all,
    I am **bleep** right now!
    My phone (lumia 620) is only 6-7 months old and I am getting sick of it.
    After a month the problems started. He crashed sometimes without a reason, the screen did weard things, etc
    And now I had it. My lower volume button is broken. My sound is now standing on 10/30, I use this phone as alarm and thats pretty load. I also use it as a mp3 but I cang lower the volume. I already checked if there wasnt just some dust between the buttons by opening the case, but it didn't helped at all!
    7 months!!
    I see a lot of users have the same problem and the only thing you guys say to us is: "Go to the nearest nokia repair center."
    Maybe something is going wrong in the production process?!
    My phone only fell once 2 months ago, the only thing he had was some scratches on the case, but it worked fine until now. So dont say its my own fault.
    I am really angry and I think I won't gonna buy another lumia.
    A friend of my bought also a lumia and after 2 months his start button was jammed!
    You guys better fix this problem fast!
    Cheers

    We're sorry to hear this. However, the best option to get the phone fixed is what you have mentioned in your post and that is to bring the phone to the Care Center for assessment.

  • My Nokia lumia 620 top volume button got faulty, I...

    My nokia lumia 620 top volume button somehow went inside the phone and I can't increase the volume, its stuck at 0! Is there any way on Windows Phone to increase the volume without the damn key? I need a solution because my warranty is in another town and I won't be there in a week.

    I get the issue is annoying, but maybe you should look into getting some different shells. Besides making a fashion statement it'll fix a broken button in no time.. (well a few seconds that is).
    Besides.. choice is always good.. As a Dutch national the colour for the next few days will be.. Orange..
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..
    Attachments:
    WP_20130417_003.jpg ‏159 KB

  • I have an iPhone 5. I got it just over a year ago and the power button recently quit working. Since ive had it for over a year, can i take it in and have it replaced or fixed?

    I got my iPhone 5 a little over a year ago, and my power button recently quit working. Since ive had it for over a year, can i still get it fixed or replaced?

    Wow that is so unlucky. If I was you I would try talking to someone at the Apple Store, explain your situation and don't be shy to shed a tear or too. Its just a shame 3 weeks after your phone getting hardware problems. I know people will say, oh buy Apple Care but I feel ya and I know adding that extra money in the beginning feels pointless and expensive.
    Worst case scenarion like I said you will have to pay Apple 269 for them to swap phones. Or if you have any nerd friends have them fix it for you. Its a tedious repair the way the power button has some weird hinge that needs to snap on and ribbons are so thin. I do not advise for you to attempt to fix your self unless you don't care if you break it completely.
    Alternatively you could just turn on Assisitive touch on accessibility and use that. That way you wont need to pay anything to fix your phone and wont need to take it apart either.

  • After a few minutes on safari it freezes everything i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

    everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • TS1538 iphone5 went in recovery mode after replacing power button, everything went well in the repair  ,try to restore but it quit in the middle of the process

    iphone5 went in recovery mode after replacing power button, everything went well in the repair  ,I try to restore but it quits in the middle of the process and go back to i tunes logo please help I been without my phone for a week.

    Hi
    did you get any reply?
    I have the same problem I dont know what to do..
    Regards

Maybe you are looking for

  • What is a file named ~ doing on my HD?

    I just was looking at my Mac HD in finder and noticed a filed with the name ~.  Is this supposed to be there?  I opened it in text edit and it looks like code. Should I delete it or is it supposed to be here?  What is it?

  • Apple advice on importing Entourage calendar from iCal - taking forever!

    Hi everyone, got onto Apple support today asking about moving our entourage calendar to iCal. So, sounded simple enough. Opened iCal, chose import, selected entourage and away we go. 7 hours later (no, I'm not exaggerating) it has got about 3/4 of th

  • Upgrading Oracle forms 6i to 11g

    Hi, We are planning to upgrade our application, currently on oracle forms 6i to oracle forms 11g Would need help to analyze what are the issues we may face after the upgrade has been done. Our team will not be upgrading the forms (upgrade would be do

  • RE: (forte-users) returning variants from OLE methodcalls

    I'm getting an error when calling an OLE method which requires two VARIANT parameters, one input and one output. Both parameters are treated as arrays by the OLE method. Error during Invoke; status code: -2147352562(0x8002000E)This error is "Invalid

  • Android Emulator get hangs on starting the application in debug Mode

    I have deployed the application on Android Emulator in debug mode but on starting the app it get hangs. I have set the Java Debugging to true in the cvm.properties file and also started Java debugger from JDev before launching the ADF Mobile app on a