Power Mac Dual G5 (March '04) freezes after disk reformat & Tiger Reinstall

Looking for some help ... read many of the G5 related threads but not sure what to do next.
Within the last month or two the machine started just shutting itself down (at first I thought the kids were doing it!) - it would also just freeze up. But it only happend once a week or so.
Then it happend more frequently ... long story short, since I have a full back I reformated the drive and tried re-installing the O/S. On the first attempt it did not make it through the install, it hung on checking the DVD. So I let it sit and the following evening, I tried it again. And it actually installed, then I ran the software update and the first set of updates went fine - and I rebooted. I then went to run additional software updates from apple and it hung. I rebooted, and now it hangs again after a few minutes.
I did run the hardware diagnostic from the CD, which ran for a little over two hours - but everything checked out.
What could be the problem. Both CPU's are running??? All the RAM (4 Gigs) was factory installed.
Thanks for any help... I am keeping the family happy with my old iMac (the one that looks like a lamp) - running Tiger that friggin machine still rocks!
Cheers,
Tom

Hi Curtis,
I'm not sure though if 80C is normal for a G5 or not. I noticed that when it was unplugged that it wouldn't retain the time
Nope, not normal, way too hot, above 70°C... If you have any temps in the 70°C/160°F range, that's likely it.
Have you blown the dust out of everything with high pressure air?\
1. Maybe All the RAM is bad
The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
Memtest OS X...
http://www.memtestosx.org/joomla/index.php
Rember is a freeware GUI for the memtest ...
http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html
If you're sure the RAM is good, try the Hair Dryer trick...
http://discussions.apple.com/message.jspa?messageID=13240047#13240047
https://discussions.apple.com/message/15223603#15223603
https://discussions.apple.com/message/15499912#15499912
https://discussions.apple.com/message/15613068#15613068
It can show on any G5, and even many other computers & electronic devices of the period.
http://www.macintouch.com/reliability/pmg5.html
http://lowendmac.com/ppc/power-macintosh-g5.html
2. Maybe the dead battery is messing it up?
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems, thoigh not once vooted as a rule...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
3. When it is heating up with use, something is expanding and not connecting any longer.
Could be the lead free solder issue with the RAM slot, and/or the thermal paste between CPUs & heatsinks need replacing...
https://discussions.apple.com/message/16223700#16223700

Similar Messages

Extremely slow after reboot, reformat, Tiger-reinstall. Need new HDD?

Got the late 2006 white intel iMac 17" in feb 2007. It started a couple of weeks back from now with choppy flash video playback. So I tried removing flash plugin, reinstalling and then removing and reinstalling browsers. Did not work. So I decided to clean the apps a bit and used AppDelete or something like it to remove apps and files associated with them. Removed some widgets, parts of Adobe CS3 and other. Bad move apparently...
After an extremely long reboot everything was changed; it was as if I had 2 mb of RAM instead of my 2 GB (upgraded). I guess I had too many programs up and running at the same time, but something was wrong. Windows XP (Bootcamped) was functional but shared the problem; seemingly low RAM or extremely slow HDD. For example; I could easily play COD4 (lowest settings, but that was from before. Still topping the servers tho ;)), but switching between software was a pain.
So I formatted the mac partition and reinstalled Tiger. An install that took two full days ( ! ). This didn't solve the problem; as soon as the HDD need to write or read it freezes. Scrolling web-pages, installing software or buffering flash video takes obscene amounts of time.
Anyway, I formatted the intire drive including the "Win"-side, re-reinstalled Tiger (took me an entire week of coming home from work, inserting next disk, coming home from work the next day, finding an kernel panic (gray screen, restart text?), restarting) and here I am now. I have switched back to my initial 1 GB RAM just to see if the "new" RAM was the problem but it is still the same.
So my conclusion is that the HDD is failing. But the hardware check on the Tiger-disks came back OK. And how can the harddrive have been "damaged" from removing the wrong software and then rebooting? Or is this all just coincidence?
What should I do? I talked to the guys at the local Mac support center and they agreed on the HDD and said I should buy a new one and let them install it (for 168$, then I'd buy HDD elsewere for 100$ maybe).
Do YOU agree? Is there something I should try before putting out a lot of money? Smells like something for the warranty, but even for swedish laws it's too late (it's one year here).

With no insight whatsoever from the manufacturer of the copier, I reformatted the internal hard disk. Life is back to normal! Apparently these HDs get fragged just like any other, so a periodic reformatting may take care of sluggish performance. Either that or the original formatting of the internal HD wasn't "compatible" with OS X.

Power Mac Dual 2.5 G5 won't start up!

Downloaded Mac OS X Server 10.4.8 Build 8L117 {Power PC} for testing purposes and the installer upgraded my system. Upon restart, I get the progress bar loading all the way but then just stops and does nothing - won't go to the login window. I have no USB bus power, so I can't even start up from the CD! Why would the software disable my USB bus? I'm stuck and can do nothing - any suggestions would be much appreciated!
Power Mac Dual 2.5 GHz G5 Mac OS X (10.4.7)

Hi Radcock, and a Warm Welcome to Apple Discussions and the Power Mac G5 Forum!
Hopefully your data is backed-up.
You could try:
Disconnect everything from the G5 and let it stand for 30 mins.
Then connect only a display, wired keyboard and mouse, and the mains.
Reset the PMU/SMU (bottom of the page)
http://docs.info.apple.com/article.html?artnum=300341
Observe static precautions (keep one hand on the G5 casing and avoid clothing with unnatural fibres) and make sure to press the button once only.
If the drive won't open if you hold down the mouse button on restart - with the G5 powered-down, slide down the silver optical drive gate and insert a strong, straightened paper clip in the emergency eject hole shown in Figure 3 here (you don't have to remove the drive)(it is a mechanical release, so you will have to slide the tray out by hand)
http://docs.info.apple.com/article.html?artnum=88215
Put the system disc in the tray and, if it doesn't close on re-start, push it in gently, and hold down the 'C' key and see if it will boot from the supplied system disc.
If 'C' doesn't work on Startup, you could try the 'Option(alt)' key. Maybe even disconnect the internal drive and see if that will force it to boot from the system DVD.
If it boots, you could run Disk Utility and see what it makes of your internal boot drive
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1018.html
but note
http://docs.info.apple.com/article.html?artnum=301269
and use only the most recent Disk Utility you have to repair your boot drive.
You may have to erase the internal drive and re-install OS X and combo up to 10.4.7
http://www.apple.com/support/downloads/macosxupdate1047comboppc.html
Please post again if none of this helps.

Power Mac Dual 1.8 Ghz: How do I connect to wireless network?

HELP!!!
I have this Power Mac Dual 1.8 Ghz with 10.4.11 OS. I used to use wire cable to connect the internet, but now the place I rent recently only provides wireless network. I was able to connect wireless network with my Windows Laptop.
Question: How do I connect my Dual 1.8 OS 10.4.11 with wireless network? I only see Internal Modern, Built-in Ethernet and Build-in FireWire options.

You can go the OWM route and get the airport extreme card and antenna
http://www.dvwarehouse.com/Apple-Airport-Extreme-Wireless-Card-802.11G-M8881-p-3 1367.html
http://www.dvwarehouse.com/Apple-Airport-External-Antenna-for-G5-2004-2005--MacP ro-Early-2008-A1066-922-6043---NEW-p-33986.html
Google the part numbers for more vender choices,
Or, you need to get a PCI WiFi card and antenna. BDAqua or Japamac have posted alternatives which are actually a little cheaper than the Apple parts.
The third alternative is a USB-based wireless adapter.

How to re-install iLife 2011 in Mac OS X Mountain Lion unit after you formatted and reinstall OS X?

How to re-install iLife 2011 in Mac OS X Mountain Lion unit after you formatted and reinstall OS X?

Sign into the App Store with your Apple ID, click on the Purchases icon in the toolbar, locate the three iLife apps and redownload them.

Power Mac G4 won't start up after shut down

I have a Power Mac G4 (dual 1 GHz with 2 GB of RAM) running OS X 10.4.11. It has the mirror drive doors and was once referred to as the “wind tunnel”.
The problem is that it will not start up after it has been shut down unless I first push the reset button. I have tried replacing the battery and resetting the p-ram. When I try to start it without first pushing the reset button nothing happens. The light for the start button doesn’t even come on. But if I disconnect the power, open it up and push the reset button it will start up and run perfectly.
Thank you for any suggestions that you might have.

Thanks BDAqua, it does sound like a bad capacitor. The PSU is one that I put in a few years back when Apple was giving them out so as to reduce the fan noise. I kept the old one until last week when I sent it off to be recycled. I suppose it would be a tough job to find the bad capacitor and I doubt that I would have the skill to replace it even if I could find it. It's not like I really need this power mac since I have a Mac Pro 1,1 but I do occasionally want to run something in OS 9 and I do love this machine for what ever reason. There was remarkably little dust inside but I went over it with a can of dust remover.
Don

10.5 on Power Mac Dual G5

When I tried to install Leopard on my Dual G5 Power Mac tower, I was plagued with a multitude of problems...most of which involve my Adobe CS2, my printers and iTunes 7.5...
Is there anyone else with my kind of problems, and can you offer any solutions?

My dual G5 has 2 internal disks, so I cleaned the second one up and installed Leopard on it and migrated everything over from Tiger which is still on the first disk.
No problems and it's now a dual-boot box.
You might check to see if your Adobe is Leopard compatible.
What is the printer problem?
Are you a subcriber to iTunes or do you just use it to catalog music?
There might be an authorization problem if you are a subscriber. I read somewhere it was best to deauthorize it and then reauthorize it after the upgrade, but since I don't use it that way, I don't know.

Power Mac G5 won't start up after a security update, please help!!!

Hi all,
My Power Mac G5 version 10.4.11 keeps showing a black video, no beep, no start up chim, this occured after updating a security patch 2008-7 from Apple website, asked to reboot then I encountered this mess.
The powerlight is turn on with solid white color. My display also has its powerlight turn on with solid white. But not nothing happens, except the fan noise becomes gradually louder and louder. I wait for hours ... but ...
My system just won't start up. Although I tried to reset the SMU, reseated RAM...
I tried also to re-install the OS by CD but it's impossible to insert it to the DVD tray.
Any help is greatly appreciated, thank you for your time.
Sgmed.

Hi BDAqua,
After weeks of strugle I can use my MAC as normal, but everytime I shut it down, she cannot wake-up, I had to refer to your hints in order to start it up again. So right now I can use my MAC every day with "SLEEP" mode.
She just cannot RE-START or wake up after a SHUTDOWN.
Any suggestion is greatly appreciated, here under I pasted the log file retrieved from Disk Utilities.
(I tried also to reset PMU, SMU and PRAM but nothing helped. Perhaps she is in need of a brand new PRAM battery???
Oct 26 23:54:04: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Preparing to secure free space : “Untitled”
Creating Temporary File
Securely erasing file
Creating Temporary File
Securely erasing file
Secure Erase Free Space stopped after 14 hours.
89.0% complete.
Erase complete.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Group differs on ./private/etc/authorization, should be 80, group is 0
The privileges have been verified or repaired on the selected volume
Permissions verification complete
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Owner and group corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Owner and group corrected on ./Users/Shared/SC Info
Permissions corrected on ./Users/Shared/SC Info
Group differs on ./private/etc/authorization, should be 80, group is 0
Owner and group corrected on ./private/etc/authorization
Permissions corrected on ./private/etc/authorization
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.5 GB (237,882,122,240 Bytes)
Used : 11.2 GB (12,042,969,088 Bytes)
Number of Files : 298,349
Number of Folders : 76,969
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
70 %)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 27 20:59:00: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,949,358,080 Bytes)
Used : 11.2 GB (11,975,733,248 Bytes)
Number of Files : 298,359
Number of Folders : 76,970
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 28 00:31:37: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 28 18:50:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 28 21:00:10: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Oct 29 19:55:10: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,921,976,320 Bytes)
Used : 11.2 GB (12,003,115,008 Bytes)
Number of Files : 299,521
Number of Folders : 77,045
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 29 20:22:20: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 17:14:49: Disk Utility started.
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,409,587,200 Bytes)
Used : 11.7 GB (12,515,504,128 Bytes)
Number of Files : 299,790
Number of Folders : 77,188
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 19:41:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 31 20:48:58: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,362,040,832 Bytes)
Used : 11.7 GB (12,563,050,496 Bytes)
Number of Files : 300,773
Number of Folders : 77,858
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 15:48:08: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,411,020,800 Bytes)
Used : 11.7 GB (12,514,070,528 Bytes)
Number of Files : 300,976
Number of Folders : 77,880
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 16:12:13: Disk Utility started.

Power Mac Dual 2.7Ghz rebooting

I have a G5 machine that reboots itself at various intervals when using. It could be on screensaver or using MS word or playing a game. It also seems to be getting worse.
After being shutdown for about 3 or 4 seconds it reboots itself.
I have checked all the fans etc and even gently hoovered the machine out to remove dust. All fans are working and there is no water leakage. When it does shutdown the fans are on but not full. The temperature of the CPU's don't go over 75C during hard usage, when you hear the fans speed up.
Anybody got any idea?
Thanks
G5 2.7Ghz Mac OS X (10.4.6) 3Gb RAM, Twin 450GB Hard Disk

Hello NeilSBarnett, and a Warm Welcome to Apple Discussions and the Power Mac G5 Forum!
Presuming that you are not seeing this screen
http://docs.info.apple.com/article.html?artnum=106227
and that you have not recently added any new hardware, you could have a look at Applications - Utilities - Console - Logs: system.log and console.log for unusual entries at the time of the shutdown.
The symptoms sound similar to those of a RAM problem.
However, before opening up the G5, you could boot from the system DVD and Repair Disc and Permissions
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1018.html
and run the Apple Hardware Test
http://www.thexlab.com/faqs/aht.html
Note that the AHT does not find all RAM problems - you may have to try running with just the supplied original RAM - and maybe re-seating that. The RAM D-I-Y instructions are here
http://www.apple.com/support/powermac/doityourself/memory.html
You could try disconnecting all non-essential peripherals and leaving just display, wired keyboard and mouse; unplug from the mains and leave for at least 30 mins; re-connect mains plug to G5,(to earth the casing), then reset the PMU
http://docs.info.apple.com/article.html?artnum=300341
Note static precautions and the warning to press the button once only.
But first of all - check the logs.
Please post again with anything you find in the logs, and the results from any other things that you try.

Power Mac G4 MDD - Has difficulty booting after shut down

I have a Power Mac G4 MDD (1.25Ghz) that is having issues when it is shut down. The power button on the front of the machine does not start the computer every time. Sometimes it works, sometimes I need to wait a while before it will work. When the button is pressed, it does not light up or anything.
I have noticed that if I sleep the computer it always seems to wakeup when the front button is pressed. But if I shut down the G4, is does not always bootup.
I have also performed multiple restarts when performing software updates, and they always seemed to work fine.
I have changed the Saft battery inside - it was at about .4v
I have performed a CUDA/PMU reset using the button on the motherboard, and followed the Apple procedure. (disconnect power, and accesories, press reset button, wait 10 seconds, reconnect, restart) It did not restart right away, had to wait 20 minutes or so.
The G4 has a new installation of Tiger, with all of the updates.
I have not checked the PSU, but plan on doing that soon. Just seems odd that it only has issues when the machine was shutdown. Seems to start after it sits for a while, but last night I was switching monitors, and shut it down, switched monitors, and it would not re-boot.
Any ideas?

With the "sometimes" nature of the problem, it could be the front panel board, a much cheaper replacement than a PSU. An Apple tech told me that one way to test the front panel board was to find one of the first Apple USB keyboards for the original iMac. The early ones have a power button like the old ADB boards that overrides the internal board/button. He said that, should the Mac start reliably from the old keyboard, then there is trouble with the front panel board. The Apple model number for the USB board with power button is M2452.
Very helpful forum member japamac has a test procedure for the MDD PSU on his site here:
http://jcsenterprises.com/Japamacs_Page/Blog/D275729F-09DA-4FBB-96B3-BEEEB2C0461 9.html
You'll need a multimeter to check the voltage levels.

Launching Color on a 2.7 Power mac dual core - not

I have a 2.7 ghz power mac. I've upgraded final cut studio through 5 up to the crossover to intel and then to 6. When I try to start Color it says Open GL not able to start - turnoff 'video desktop'. (the same programme runs on my octo core intel mac)
Question 1: Will color run on power PC macs and
Question 2. how do I turn off video desktop whatever that is - and
Question 3. why does it conflict with open GL
Question 4. Is there a color forum and why can't I see it if there is ?
The answer to 3 of course is not that important
Thanks in advance

Ok, that one is easy, just go into your system preferences, Decklinki settings and uncheck the "Enable Video Desktop" box. Tada, it's starting now.
As for the machine, I own the same setup and Color and Motion 3 just work fine, but I've put an ATI X800XT in that G5 for it to work.
Best regards,
Jean-Luc

Power Mac G4 no iMovie and no restore disk

I purchased a used Power Mac G4. It is running OS 10.4
The problem is that it does not have iMovie installed. Online help states that I need the restore disk, which I don't have. Is there a way to get it, or is there another alternative?
The other problem is that updating the software requires a password from the former owner. The machine boots to desktop without a password, it's just needed for updating Safari. Is there a way to reset that?
The machine is in other wise fine shape and I'd like to make it useful.
Thanks,
Jay

If you are in the US call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
If you are in another country:
http://support.apple.com/kb/HE57
Have you asked the vendor for the password?
iMovie is part of iLife. You should be able to purchase the relavent version on eBay or Amazon.

Apps won't launch after disk reformat

I recently deactivated my Creative Cloud apps on my primary machine because I needed reformat the startup partition. After the reformat everytime I try to launch an app I'm asked to sign in, after the thank you screen the app will not launch (with the exception of Photoshop). Everything works fine on my secondary laptop.
I'm on OSX 10.6.8. Also, I use Retrospect to clone my system back to the reformatted disk. I'm suspicious that that might be the cause, but I'm also worried about making things worse if I try to reinstall a new system.

Installing a new system fixed the problem

Mac Pro boot option screen freezes after I select the Windows partition

Hello,
I have a mid-2010 Mac Pro, and I am currently experiencing an issue regarding booting into Windows 7. Windows 7 64-bit is installed on its own HDD in bay 2 of my Mac Pro. When I restart my Mac Pro (from OS X), hold the option key, and select the windows HDD, the computer completely freezes and locks up. I can't move the mouse or use the arrow keys on the keyboard, and the boot select screen completely locks up after selecting the Windows HDD. This issue does not happen, however, after a cold shutdown and startup. If I completely shut down my Mac Pro, start it up, hold the option key, and select the Windows HDD, it boots into Windows perfectly fine. It is only after a reboot from OS X that the boot select screen completely locks up after selecting the Windows HDD.
I have tried everything I can think of, including resetting the PRAM, SMC, repairing disk permissions, etc. I did also call AppleCare a while back, and the technician on the phone was unable to find a solution. I have also tried selecting the Windows partition in the Startup Disk pane of system preferences, and that did not work either. I have also tried utilities such as BootChamp to automate the restart. Same issue. Could this be a hardware issue?
Thank you,
Robert

pull OS X and try
Too early to even try F8 - Windows safe boot
Try booting Windows DVD would be first on my list
Every month on 2nd Tuesday all the security updates for Windows patches come out
Clone your Windows hard drive - $20 Paragon Clone OS are just like CCC: bootable, swapable backup copies
Don't try using and it has nothing to do with OS X
It may be something you or Windows installed though or even an update pending on restart.
https://discussions.apple.com/community/windows_software/boot_camp?view=discussi ons

G5 mac dual 2ghz ppc shuts down after target disc boot

Please help. I'm trying to startup my ppc in TD mode and it shuts off after a brief showing of the firewire logo on the monitor... has anyone else seen this problem?
thx
a
g5 dual 2ghz ppc Mac OS X (10.4.8)

It is connected to a new intel mac pro. I'm trying to use the migration manager to transfer data. I have disconnected all other devices, and running just 1 monitor. I have taken RAM out (in a pair) in an attempt to reset the PRAM (but my keyboard commands do not work either) The only keyboard command that does work is "c"... ay ideas?

Power Mac Dual G5 (March '04) freezes after disk reformat & Tiger Reinstall

Similar Messages

Maybe you are looking for