Power ran fully out on my MacBook Pro and is currently recharging. However, cannot get it to restart. Totally dark and have tried to deactivate via power button, keys and track pad but get no response
Power ran fully out on my MacBook Pro and is currently recharging. However, cannot get it to restart. Totally dark and have tried to deactivate via power button, keys and track pad but get no response
Sulapeace,
for how long has your MacBook Pro been recharging? Has the light on your MagSafe connector changed color since you’d started recharging it? What do your battery level indicator lights show when you press the button next to them?
Similar Messages
-
Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My Iphone 5 has completly stopped working, have tried holding the sleep wake buttons etc but still no responce, there is an apple icon that appears but it then just goes agsin, any ideas.
see here
http://support.apple.com/kb/HT1808 -
I have a MacBook Pro, Early 2011, 2 GHz Intel Core i7 which I udated some days ago with Lion Mountain 10.8.2. Before it worked just perfect. Now, since the update, I loos the internet connection after a wile, (at the beginning every 20 sec, now up to 4 hours) even that the sign of the WiFi network connection shows to be perfectly connected.
My other divices like IPhone, IPad stay connected and work. The rooter is new and cannot be the problem. I tried nearly everything I found on the bloggs, but nothing helped actually. It must be a softwear problem on Lion Mountain, what can I do?
Thanks for any helpI FINALLY SOLVED THIS ISSUE!!!!
New routers have "mixed" modes for your network; this means that it will automatically choose the best option between wireless-B, wireless-G and wireless-N network modes. I used to experience this issue using the 2.4 GHz. mixed mode wireless network.
Thankfully, my router can create 2 networks: a 2.4 GHz. network and a 5 GHz. network.
When I randomly changed this value to "use only wireless-B and wireless-G" trying to fix an issue with a wi-fi expander, the iMac wi-fi issue dissapeared! I tried it with wireless-N only, but it didn't work.
So, finally, I have a 2.4 GHz network with only wireless-B and wireless-G modes which works PERFECT with the iMac, and a 5 GHz. network with a mixed* wireless mode for everything else mode.
*PD: by "mixed" mode it means that the router will automatically choose between B, G and N network modes as it fits better. -
Title pretty much says it all. Install seemed to be going fine, then upon restart it hit a gray screen with a progress bar for about 30 seconds. Once the progress bar makes it to about 15% the machine simply shut off. I tried turning the machine on again a few times, but each time I had the same issue. I then tried running the 10.8 recovery disk, but it just showed the gray spinning wheel for about 6 hours. Any ideas?
Something similar issue with me too. Intallation went fine. Then it started updating java once reboot it got stuck on grey screen. It wont boot at all. That spinning wheel keeps on going forever. :(
-
I get a message that my ipad 2 and iphone 5 cannot connect to the itunes store when I try to sync a book to my book app. Although, when I click "store" both are able to access the itunes store. Why is this? Also I tried to open a book that was synced and a message that I did not have enough memory to load this book popped up--when I know that I have well over 40gb of memory left in my ipad and over 16gb left in my iphone. The message that I cannot connect to the itunes store is strange that it offers no option and I have to hit OK to get out and use my ipad or iphone.
Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and changing the date to a few months (or maybe a year or two) in the future and then re-trying -
How can I get photoshop elements to work on my mac with Yosimite??
Yes, that is correct. The organizer is just a database, so your photos are wherever you put them intially. Did you import from iphoto? In that case, organizer does make duplicates (to avoid writing into the iphoto library, which would be a Bad Thing to do). If you didn't specify a location, the copies that PSE uses will be inside subfolders in the Adobe folder in your Pictures folder.
-
How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?
How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
Thanks folksYou should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly. -
I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.
In addition to pixel density, you are up against the translation driver card in the TV.
If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page. At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
Mac falls into the top 25% of the page, maxing out at 1366x768 often. This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector. Computer monitor first, TV second. But the thing is only 27 in. Good thing TV is not as important to me as it is to others. -
I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?
I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port. -
How can I get hdmi out from 2006 macbook pro?
How can I get hdmi out from 2006 macbook pro?
You will need something like this:
http://www.amazon.com/DVI-HDMI-Cable-6ft-Male-Male/dp/B0002CZHN6/ref=sr_1_3?ie=U TF8&qid=1363820878&sr=8-3&keywords=dvi+hdmi
Ciao. -
After a year of no use and a resulting fully discharged battery, the MacBook Pro refuses to recognize the administrator name and password (both). It has system OS X 10.6 which can not be upgraded without the information. How can I reset or reistall the administrator name and password?
Thanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
Even if I sold this Ipad and bought a new one, the system memory is still there.
I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
Thanks for your comments.
RAZ -
can anyone tell me how to get sound out of my macbook pro. i bought a miniport display/hdmi adapter for my tv but in network preferences i got video to work but not sond. i cant get my tv to come up as a listed device so that i can change setting on output audio. i was told maybe something is disabled as devices so confused any help greatly appreciated 516angelo
Your Mac does not have a thunderbolt port, but has a mini display port instead. It will not output sound so you will have to get sound through a aux cable.
-
I just got my daughter a new macbook pro. She currently shares my wifes apple id for iTunes on her iTouch. I need to set up an email account for her. Is there any way to set up a new iCloud email account but still use my wifes apple id for iTunes?
No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that. -
I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)
If you are on Yosemite, and have a CoreStorage volume (the default), it is not visible on the Windows side. The Apple HFS driver cannot read CS volumes.
You can verify this by running the following command in OSX Terminal.
diskutil cs list
If you get any output, such volumes will not be visible.
As a work around, if you really need it, check the 'Revertible' value. If it is yes, you can revert it to HFS+ by using the following command
diskutil cs revert
Here is the syntax for the command. The LVUUID parameter can be seen as a long string for your Logical Volume. Do not use the Logical Volume Group or any disk UUIDs. If you need the exact command, please post the output from the diskutil cs list command?
diskutil cs revert
Usage: diskutil coreStorage revert
MountPoint|DiskIdentifier|DeviceNode|lvUUID
[-stdinpassphrase | -passphrase [passphrase] | -recoverykeychain file]
Convert a CoreStorage logical volume back to its native type.
The file system must be mounted and resizable (i.e. Journaled HFS+).
Ownership of the affected disk and a passphrase (if encrypted) is required.
Maybe you are looking for
-
HT1711 The song I just bought is saying it is corrupted and won't download. How do I fix this?
Song is "Leaving Earth" from the Mass Effect 3 Original Soundtrack
-
How do you publish an Android version of your app?
Hi, I was wondering if someone could help me. I want to do an Android version of my app to publish in DPS. I was just wondering if there was a step by step guide? I know I have to create alternate layouts, but do I save them in other folder with the
-
I am using one N80 which is hanging sometimes. i am using this phone in dual band utms/gsm for 3G/2.5G network. It hangs regularly while sending sms or calling time. Is there any solution for that problem? Thanks Shamim
-
POP mail doesn't show subfolders (mailboxes)
I have more than 100 rules that direct my POP email to 15 mailboxes. None of them show up on the iPhone. Instead, all of the email - including junk mail - appears in a single inbox. If anyone knows of a way to make these subfolders appear, I'm all ea
-
Web Services with Large Result Sets
Hi, We have an application where in a call to a web service could potentially yield a large result set. For the sake of argument, lets say that we cannot limit the result set size, i.e., by criteria narrowing or some other means. Have any of you hand