Power Saver error 0x7E

Hey, I removed the pre-installed OEM windows and installed my own windows, I downloaded all the drivers and software from the Toshiba website, all of it works, except the Power Saver. When it is installed and want's to start, I got the error 0x7E. When I want to remove it to install another version, I also got that error.
Does somebody know a solution? Thanks

Hi
I have also found some topics about the same issue.
Check this one:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9573&messageID=33773#33773
It seems that this problem occurs after manually Windows installation without to use the Toshiba recovery CD.
I dont know exactly why it occurs but in my opinion the Toshiba image includes some files which are missing on the usual Windows installation.
In my opinion you should install the Toshiba recovery OS and if you want you can remove all not necessary applications.

Similar Messages

Solution for Power Saver error during install

Hello,
i have read several topics about the powersaver error during install of this utilty.
i had the same problem even with a clean install of windows XP and i have found the solution.
The error seems to disapear and Powersaver works fine after install of the Hotkey utility :
http://support.toshiba-tro.de/tools/Satellite/sa60/win-xp/hotkey-dd/hotkey-dd-xp-10008sa-du.zip
Hope this post where helpfull.
Greetz DeLorean
[Edited by: admin]

Hi
You are absolutely right. Common modules is a kind of basic application who must be installed first. All other Toshiba tools should be installed after. The functionality of Power saver utility depends also on installed common modules.
Unfortunately I can not give you any kind of advice but in case that there is some error message the best solution is to remove and install the Power saver again. Check also Toshiba download page. Maybe you can find a newer version.
Bye

Satellite A60 Power Saver error

Hi all,I have a Satellite A60 and I am getting the following error at start up;"Power Saver A fatal error has occured this program will be terminated code ox2". At various times whilst logged on my notebook turns off and to continue I have to log in again as from start up.Can anyone please help with a solution.Thank you,Mark.

Hi Mark
The only thing that you can try is to remove power saver and try to install it again. It is also possible that this will not help because there are some entries in the registry. If there is no problem for you the best way is to reinstall the unit with recovery CD. After that it will work again properly.
In my opinion it is not easy to repair some specific tools like power saver.

M40-110: Power saver error

Hi everyone. I own a M40-110
Can anyone pls help me with the following;
Lately, I have been getting the following error. "power saver fatal error occured 0x0" any idea what all this means?
Also ever since then, my computer does start up very slowly. Boot screen takes 3-5 minutes to open and once i have my screen is supposedly up and running HDD indicator doesnt turn blue and my screen gets frozen.
Gonna go bonkers as I bought this computer only a month ago ..
Please help
Thanks
Alican

Hi
Well, that could be a reason for the issue.
If you have installed the original OS from Microsoft CD and not from the Recovery CD you should install all Toshiba drivers, tools and QFEs (Quick Fix Engineering).
You can also install the operating system on English using Microsoft full version CD.
Bye

Error when installing Toshiba Tools and Power Saver

Hi,
I have a Satellite A100-771 and installed Windows XP Professional with SP2.
Afterwards I installed all drivers. After that I wanted to install the Toshiba Utilities and have got an error message : "Toshiba common Module not found! This setup will terminate."
Furthermore I tried to install the Power Saver Tool, which is more important as the uilities I think. And here I have got the error message: "A fatal error has occurred. This program will be terminated. Code:0x7E"
I am not sure what I can do else. I also installed the hotfixes for Windows which are on the ToolCD from Toshiba. But the problem is still there.
The difference between both errors is that the installation of the utilities setup stop before finishing installation. On the Power Safer installation, it finished on 100% and terminate the setup or the program after the installation.
May somebody can help me.
Eathen

There is a specific order that the Toshiba utilities and drivers have to be loaded in. This list is on the Toshiba download page, and the common modules is one the first utilities that has to be loaded for the others to work

Fatal Error when starting Power Saver on Tecra M9

When I try to start Power Saver on a Tecra M9 (21), I get a Fatal error; code: 0X51A.
I've tried various combinations of uninstalling, cleaning registry, rebooting, etc., but everytime I reinstall (version 7), I get the same fatal error.

Hi
You are speaking about the Power saver for XP? Am I right?
Please note that you have to install all drivers, tools and utilities in the right order!!!
The installation instruction should be checked and you should follow the guide lines.
Very important;
The common modules is a necessary tool to get all other Toshiba tools running properly. Furthermore there is a power saver driver and utility. The driver must be installed before the utility!!!
Please dont forget this!!!

Receiving error message when trying to install Toshiba Power Saver

Recently toshiba power saver stopped working - I removed it and redownloaded it from this website, now whenever I try to run the install i get a "unable to machine id" message and the install stops.
First time posting here so If i'm on the wrong forum or you need anything else apologies in advance.

Hi there,
where did youve downloaded the powersaver? Maybe you downloaded the wrong one for your machine. Its absolutely important to download EXACTLY that software which fits your machine type.
When downloading stuff from toshiba websites you have to keep an eye on the version of your machine (e.g. Satellite A100-552 -> download the software for type "552" of the Satellite A100 series).
This sometimes resolves many errors and clarify some not very nice situations.
Please, more details on your problem. :)
Greets

Toshiba Power Saver fatal error 0x51A on Satellite M115-S3094

Hello,
By the subject, the problem is there. Unfortunately, my computer which is the Toshiba M115-S3094, just recently had a Fatal Error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it no longer even shows on the taskbar.First, I went to the Power Properties to restore the proram, but to no avail.
Then, I tried uninstalling and subsequently re-installing the program and it still gave me the same problem with the Error: The program will be terminated. Fatal Error 0x51A. So right now, my laptop is not running on the Toshiba Power Scheme but on the common Windows scheme, like Presentation or Portable Laptop.
So I need help to restore the Toshiba Power Saver. I run the Toshiba M115-S3094 with Windows Media Center Edition.

Hi
The Satellite M115 seems to be a Toshiba US notebook because of the 5 at the end of the number.
In this case you should use the Toshiba power saver from the Toshiba US site. Did you???
Maybe you have used the right Power saver utility, so possibly some registry or any system files keys are damage in such case the new OS installation from the Toshiba recovery CD would be advisable.

Power Save Utility fatal error 0x51 on Satellite M70

I have just joined my M70 to a domain (SBS 2003) and get this message when I login to the domain.
If I logon to the local user account on the laptop then it works fine.
If I go to power options in control panel and select a different power scheme then the error goes away but I cannot select the TOSHIBA Power Save sheme in the schemes combo.
Please help
Cheers
Dave

Possibly the Power saver Utility and the Power saver driver are not installed for all user accounts on the M70.
Or all user accounts are not authorized to use the Power saver Utility and the Power saver driver.
On the Toshiba driver page you can find the Toshiba Power saver utility and the Toshiba power saver driver.
Both applications must be installed and must run together.
>If I go to power options in control panel and select a different power scheme then the error goes away but I cannot select the TOSHIBA Power Save scheme in the schemes combo.
This is clear. If the Toshiba power saver scheme will be NOT chosen in the Windows Power Options then you will be not able to use the Toshiba power saver.

Tecra S2: Power Saver gives often an Error Code 0X40

A fairly new Tecra S2 model PTS20E-01Y011DU gives often during use a fatal error in the Power Saver program with "this program will be closed" error code 0X40

Hello
I don't know if this will solve the problem but first step you can do is to remove power saver, restart the unit and try to install it again.

Power Saver re-install parameter error on Portege S100

I am trying to re-install the Power Saver utility on my Portege S100 (after removing it through Control Panel | Remove Programs).
I have downloaded the S100 WinXP version of Power Saver and unzipped it. When I run the setup.exe I get a stop error message saying "The parameter is incorrect". There is no apparent documentation with the download saying what parameter is required etc.
Has anyone seen this before and/or got a suggestion on how to re-install Power Saver successfully.
Thanks.

Thanks, and I'm sorry if I'm being dumb, but ...
... there isn't any information about installation on the driver page for the Power Saver. It says to check inside the zip file, which doesn't contain any such information either.
Also, I haven't uninstalled the Common module so I assume it is still there on my S100. I could download it and try to install it again over the top of the existing version but, without installation instructions, I don't know whether that would make things worse for all my existing Toshiba utilities even if it allowed Power Saver to reinstall correctly.
I guess I could uninstall all utilities and then reinstall ... but from what you say I would need to know the full list and correct sequence for this install.
Are you able to give me more explicit directions to the installation instructions.
Thanks for your help.

Tecra A9 - Power Saver crashes - fatal error has occured code: 0x2

Hi,
today, when I switched on my computer the power saver began to crash.
I restarted the computer several times and the result always is - A fatal error has occured. This program will be terminated. code: 0x2.
This error pops out even when I try to reinstall the application.
May be this has something to do with the service pack 3 I installed couple a days ago.
Anyone has an idea ?
Martin Vassilev.

I saw this error long time ago with WXP. In my opinion it has nothing to do with SP3.
My experience says you will not be able to fix this. There is something wrong in registry entries and reinstallation will not help at all.
Only one method can help, the most radical one, new OS installation using recovery media.

Power Saver fatal error code 0x47f on Equium

Hi
I have a problem with power saver on my equium.
When windos starts up a box appears saying 'fatal error toshiba power saver program will be terminated. error code 0x47f'
i have tried using the tols and utilites cd to try and reinstall the power saver program, but when i click on setup on the interface, a box appears saying
C:\WINDOWS\SYSTEM32\AUTEXEC.NT. The system file is not suitable for running msdos and microsfot windows applications. choose close to terminate the application.
i have tried installing from the msdos command prompt also, but no luck there as it presents the same message.
Can anyone help???

Hi
This error message may occur if one or more of the following files are missing or damaged:
- Config.nt
- Autoexec.nt
- Command.com
I found this useful info here in this Microsoft knowledge base article
http://support.microsoft.com/kb/324767
try to repair the Autoexec.nt file and after new reboot you could to reinstall the Toshiba Power saver again!

Error meassage (Toshiba Power Saver)

when the computer start this meassage come (toshiba power saver) a fatal error has accurred this program will be terminted code 0x0
what is the proplem please?

Hello
It is really not easy to say why this message occur. In my opinion you should try to remove Toshiba power saver and install it again or if this message occur for a short time try to rollback the system to one previous time using System restore tool.
Bye

Error message while Power Saver installation on Satellite A200

Hello,
I have an error message when installing Power Saver on PSAECE A200 -14D: 1612 error the installation source for this product is not available. Verify that the source exists and you can access it.
What could be the problem?
Thanks.

OK, reinstalled XP, and problem solved.

Power Saver error 0x7E

Similar Messages

Maybe you are looking for