Power supply dead? Can I get at the Hard drive?

I recently had a storm which blew one of my external firewire drives (it goes on but won't mount) and when I tried using my older G4 (Quicksilver, with OS10.3.9, and Classic) to boot up in OS9 and try my Norton Utilities, the G4 froze. It did it several times. I eventually pulled the power cord. When I plugged it back it, there was a spark (at the plug in point on the G4, not the wall outlet. Since then, it won't power up.
I tried booting it up in firewire disk mode and using my Intel MacPro, but no dice.
I did a search and have seen discussion on what sounds like my same problem. I hold the power button and the light goes on, but goes right off as soon as I let go.
I tried pressing the PMU; I saw a lot of discussion about the CUDA button but it seems these are one and the same thing. I removed the small battery and tried to get a replacement but have not succeeded as yet. Though I don't think that's the problem. It might be the power supply.
Anyway, here's my question: can I use the power supply and/or battery from an even older Mac, a PPC 8600?
And, whether or not that works, can I yank the hard drive from my G4, along with a second internal drive I put in (slave) in order to get data of it? (I'll give up trying to fix the G$ itself if I can just get my files off it.
*While I'm at it, can I take apart the external firewire drive that won't mount, and get at the files on that in some way. I tried Data Rescue ll but the drive still would not mount so that was useless.
Any help on any of these will be greatly appreciated. (Yes, I do have a nice big powerful UPS but the G4 and the external were no plugged in to it).
Thanks
noodle--head grrum...PY

Hi-
To recover your hard drives and data (including the external) get yourself a housing, and insert a drive, and move data to a different computer.
You'll want a firewire external housing with the Oxford chipset. I can recommend any of the FW or FW combo housings by OWC on the following page:
http://eshop.macsales.com/shop/firewire/add-ons-and-hubs/enclosure-kits
You will need a QS power supply-others won't work.
If you end up wanting a power supply for the QS, check eBay, or the following:
http://www.mac-resource.com/store.php?item=6612513.PART
http://hardcoremac.stores.yahoo.net/pog4quposu34.html
As for the battery, as long as it is the same 3.6v and form factor, any will do:
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
The Radio Shack P/N is 23-026.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

Similar Messages

  • I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

    I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

    Unfortunately, that drive is long gone, probably back to the mfr. Drives are not returned when they are exchanged. You can go by and ask them, but the chances are slim to none.

  • How can my daughter use the hard drive in the Time Capsule ...

    So, I am in Oklahoma and my daughter is in Tennessee...
    She has a Time Capsule where the Wi-fi base station quit working, but the hard drive may be OK.
    She bought an Airport Express to use as a wi-fi router.
    The question, then, is:
    How can my daughter use the hard drive in the Time Capsule to do Time Machine backups?
    Thank you very much for your insights.
    Roberto

    It can be done but is very messy. That is assuming the TC is still functional which I kind of doubt.. the wifi is seldom the only thing that will die .. so whatever problems it has the wifi would be the least of it.
    Anyway.. do a factory reset to get started.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    If the LED is not lit then the TC is dead, not just the wireless.
    The setup for using the TC is explained in the bottom of this thread.
    TC in a second local network.
    https://discussions.apple.com/thread/4817218?tstart=30
    The idea is to set the TC to provide router function.. and the computer plugged in by ethernet to as a second network.. but there are rules on how this is done which I have explained in that thread.
    I notice that Mountain Lion deals better with order of network priority than Snow Leopard used to .. so it might not need to have manually set gateway and dns.. although I would still recommend it. It simply stops the second network causing issues.
    It is much easier to simply purchase an external drive and plug that in.
    It is cheaper, faster and more reliable than using the TC for TM anyway.
    Plus a lot of the later machines no longer have ethernet ports.. and using dongles is far from neat.. although thunderbolt to ethernet is IMHO necessary accessory for anyone without ethernet.

  • I have an iMac 21.5 inch purchased in 2011 with a failing 1TB Seagate hard drive. Can I get a replacement hard drive?

    I have an iMac 21.5 inch purchased in 2011 with a failing 1TB Seagate hard drive. Can I get a replacement hard drive thru the Apple Replacement Program? I did purchase the Applecare Plan but it expired in Dec. 2013.

    FWIW, if you purchased the iMac in 2011 and purchased Applecare, you are covered for a total of 3 years. You mentioned yours expired in December 2013 - that cannot be unless you bought yours in 2010. If you bought it in December 2011, you should still be covered until December 2014 - if so, contact Apple/make a Genius Bar appointment quickly so the replacement is covered by the warranty. The hard drive replacement program might have expired, but as long as you're covered by Applecare, a drive replacement is covered.

  • Can i get a bigger Hard drive in my Macbook? :)

    Hey everybody, a few questions for your guys. Thanks
    Can i get a larger hard drive in my macbook
    whats the largest size
    Does it void the warranty
    were can you buy them from
    and is it easy install
    Thanks guys

    Here is a Do-it-yourself guide.
    You also might consider maxing out your RAM since you plan on opening up the machine anyway. (Depends on which model you have, the older CoreDuo can use 2GB max, later Core2Duo models can use either 3GB or 4GB, depending on model.)
    Other World Computing can help you find the parts that are compatible with your particular computer model, and they may offer a small rebate for your original RAM/drive.

  • How can i get an internal hard drive cable replacement?

    how can i get an internal hard drive cable replacement?

    I believe iFixit sells them:
    http://www.ifixit.com/
    You can also go to an Apple store, they won't sell you the part, but they will replace it for a fee.

  • Getting in the hard drive

    I'm trying to set up an ipod touch here. How do I get into the hard drive? I go in and there is a dcim folder, but I can't put anything in there. I absolutely hate itunes and refuse to use it. Having to sync to get music on is the dumbest thing ever. My sansa clip is so much easier because I have full control and can just paste in what I want and manage it directly without using any crappy software. I want to do that with the ipod. How do I do it?

    No product is right for everyone.
    Many prefer itunes, many do not.
    Just because you do not like the product does not render it useless to everyone.
    You can sync via playlists or
    checked music or
    Manually managed (drag and drop).
    If the product is not right for you, then find something that is.

  • How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

    How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

    You can't unless you have a bootable system on an external drive you can use. Otherwise, you need either the original disc that came with your computer or a retail copy of Snow Leopard DVD. The latter contains 10.6.3, so your model must be capable of booting from that or an earlier version of OS X.
    You can purchase replacement discs from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.

  • Selling my power mac G5, how do i clear the hard drive?

    hello!
    i am going to be selling my power mac G5. how do i clear the hard drive of all of my stuff, so the new owner has a fresh "new" mac?

    Click here, and then follow the instructions in the article which relates to your situation.
    (25054)

  • I have 2 different MacBooks (owned by 2 people) connected to my Time Capsule. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule?

    I have 2 different MacBooks (owned by 2 people) connected to the same Time Capsule over a wifi network. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule? Is there a way to ensure that the files on the 2 laptops are kept private from each other? Thanks!

    If someone really wants to do something, it won't take them long to find out how to do it. 
    http://pondini.org/TM/17.html
    Security on a Time Capsule is a bit like installing a lock on a tent. It will keep the honest folks out, but probably not the others.

  • How can I get by external hard drive to be seen by other computers on the Airport Extreme Network

    I purchased and installed an Airport Extreme yesterday.  I finally got my computers to find it, but I cannot get my wireless laptop to connect to the external hard drive that is connected to the AE using a Cat5 cable.  I have already verified that the Cat5 cable IS good so please don't advise me to change the cable.  I am 36 hours into my purchase of the AE and ready to take it back to the store because it is NO WHERE as good as the sales rep reported it to be. 

    An ethernet connected drive is actually not part of the AE setup.
    It is merely a client on the network.
    So the first chore is to find it.
    I saw in your other post it is iomega device..
    http://www.iomega.com/support/manuals/800mseries/trblshoot_conf.html
    A few questions..
    Other computers can access the network hard disk??
    What OS is on the computer that is having access difficulty?
    Can you please ping the hard disk.. on a Mac open the terminal and type ping followed by the address.
    Or on a PC open the windows command and type the same thing.
    Does the hard disk respond to ping?
    Try mounting it directly in Mac by using Finder, go, connect to server.
    SMB://IPaddress
    Or CIFS://IPaddress or AFP://IPaddress
    In windows type the address directly into the windows explorer address bar
    \\IPaddress

  • I have tried and tried to repair my Powerbook G4 but I keep getting the error message that the hard drive can not be repaired Can I get a new hard drive, how much, where?Thanks!

    I have erased everything buit that didn't work, I have tried to reinstall from the apple disk so...I am thinking it is time for a new hard drive( I think, but not sure) where do I get one and if I sdo will it help the problem?
    Thanks
    sssail3 at aol dot  com

    Did you try zeroing the Drve before installing?
      1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
       3. Click the Erase tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to install.
    Here's some new Hard Drives for PBs...
    http://eshop.macsales.com/Search/Search.cfm?Ne=8050&Ntt=2.5+hard+drive&Ntk=Prima ry&Ns=P_Price|0&N=6885+4294967075
    To see how it's replaced, go here and choose your PB and click on the Hard Drive link...
    http://eshop.macsales.com/installvideos/

  • MacBook Pro can no longer see the hard drive

    I've got a MacBook Pro Core 2 Duo, 15-inch.
    Okay, so I was chasing the nazis out of North Africa in Call of Duty 2 when the game froze. Command-Option-Escape was unresponsive, so I held down the power button to shut the whole thing down. When I brought it back up, I got the flashing folder icon.
    After yelling a few words I shan't repeat here, I booted off the installation DVD, then started up Disk Utility to try to repair the disk. However, Disk Utility only sees the DVD; it doesn't see the hard drive at all. Neither does Startup Disk or System Profiler. (The hard drive would be under the ATA section in System Profiler's menu, right? It only shows the DVD drive.) If I try to go ahead with the OS X installation, at the "Select a Destination" screen, where the list of disks should be is disturbingly blank. So according to every method I've tried so far, it's as if my hard drive has been entirely disconnected.
    This was my Christmas present, and I was hoping to get at least two years out of it, not two weeks. Anyone have any idea how to get this beautiful machine back on its feet again? I'm familiar with Unix and not afraid of using the command line, but I'm not sure what to try there.
    15" MacBook Pro C2D   Mac OS X (10.4.8)  

    Okay, second question: How does this forum software work? According to the thread list, someone named MacWizard has replied to this thread, but I can't see it.
    MacWizard, if you could email your reply to spearbrave at gmail point c0m so I can read it there, I'd appreciate it.
    15" MacBook Pro C2D Mac OS X (10.4.8)

  • Can anyone help. I need to reuse my SDHC cards and transfer footage from an ongoing profect to a hard drive. Can i edit from the Hard drive or am I better transferring info striaight from camera to time line

    Hi I am using a JVC GY-HM100 camera which is meant to work well with final cut pro.  I have an ongoing project but need to save money and resuse the SDHC cards that are currently full of footage.
    Would I be better off transferring the footage straight to the time line (as rumour has it you can do this with this camera) or store the footage on a hard drive and edit it later without risk of losing the footage.
    Many thanks
    Lindabob

    Thanks Linda,
    Here's some more info for you:
    This is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
    Check the spec of your Mac against the system requirements:
    http://www.apple.com/finalcutpro/specs/
    Check the spec of your graphics card. If it's listed here, it's not suitable:
    http://support.apple.com/kb/HT4664
    Make sure you're using the latest version of the application - FCP X 10.0.3 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.3.
    Check that you have at least 20% free space on your system drive.
    If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
    If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system. Do NOT import any of the settings etc from the old account - simply use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended - but remember, if you reinstall the system, and then use Migration Assistant (or anything else) to import all your old settings etc etc, you may well be importing the cause of the conflict in the first place.
    Keep projects to 20 mins or less (about half that for Multicam). If you have a long project, work on short sections, make them into Compound Clips and then paste these into a final project for export.
    If you ever experience dropped frames, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
    If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
    Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
    Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
    http://assistedediting.intelligentassistance.com/EventManagerX/
    Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
    The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
    Andy

  • My Power Supply Blew Up Is My Board or Hard Drive Damaged?

    Bought myself a Geforce 4 4200 Ti on Saturday ) , installed it, loaded the drivers etc.. and everything was perfect.
    I then ran 3dMark 2002SE 5 times on a loop, I left my machine running, then it just switched off.
    I tried the power button, the reset button etc.. nothing worked, I then pulled out the power cord and put it back in, I was then presented with a blue flash   a bang, and lovely smell of smouldering ;( .
    I rushed out to buy a new case and got the system up and running after formatting the hard drive, the system now takes much longer to load considering it was a clean Install, and gets slugish at times - so I reakon some damage has been done, but I'm not sure if its the HD or the Mobo.
    Is there anyway of knowing/any software to test if the board has been damaged. I've ran all of the Maxtor tests and the hard drive passed, but the performance issue seems to be linked with the HD.
    Also what would cause my p/s to blow in the 1st place, it was a 350w and less than a year old.

    I remember a similar problem to this, when the 1st ATA133 boards came out I built a new machine can't remember which board, all I can remember is that the HD ran like a donkey until I installed the 4in1 IDE drivers. And thats very similar to the problem I'm having now, before I could copy+load a program+double click a directory and the system would cope, now it just chugs along, this is why I'm focusing on the HD. It would be nice to get to the bottom of it though as both are a similar price to replace should I need to.
    I am currently running the new Hyperion drivers and was doing so before, with no problems, so i think they can be ruled out.
    Only other thing is I've flashed my BIOS to the latest version, so I could have a config issue, anyone know the best configs to use for my 7200rpm ATA133 drive?
    Also as I asked before is there any software that can test the board for damage?  
    Many thanks and your help is very much appreciated.

Maybe you are looking for

  • ITunes unable to install? - Could not access network location %APPDATA%/.

    Okay, I received a never used iPod Nano (Model MC034LL ,Version 1.0. 2 PC, it looks like this http://www.iphonemag.ch/wp-content/uploa- for Christmas this year, however; I'm having some trouble installing iTunes. I have already downloaded iTunes, but

  • Move Web Pages from one mac to another

    Hey I have a website created and published on my MB Pro uisng Iweb'08. I want to continue all my website work going forward on my Mac Pro. Is there a procedure one needs to follow to make the transfer smooth? Thanks Rpk

  • MVC in ABAP programs and objects

    Hello, Is there an example of using the Model-View-Controller outside of BSP?  Or a guided procedure not using Netweaver? I have several related data entry screens that I would like to implement in one transaction with as little maintenance as possib

  • Feedback form development

    Dear all I Developed Feedback using Java script with some validations...if the user submits it will go to the specified email id..which i was mentioned in Form action type.. My question is...There are nearly 7000 customers will login into portal ever

  • Different page heights

    I have a website whose pages are pretty much the same height, however, I have 3 pages that are considerably longer than the others.  It uses an accordion spry that has about 15 tabbed panels.  When I expand some of the content areas of the spry panel