Powerbook G4 mouse button won't work

My wife has a titanium powerbook g4 and she has been having problems with the mouse button on the laptop.  You have to push it just right to get it to work, if you are lucky.  I wasn't sure if I could clean the button or if anyone has had this issue and had to replace it.
Thanks for any info.

Try this - Reset the trackpad by placing your entire palm directly onto the whole trackpad for 3 to 4 seconds, and then remove your hand from the trackpad in one smooth motion.
 Cheers, Tom

Similar Messages

  • Right click as primary mouse button won't work

    Here's my problem...
    I go into system preferences / keyboard & mouse and click on "Right" under "Primary mouse button:".
    Then I close system preferences, but my right click isn't set as my main click (the contextual menu keeps popping up).
    So I re-open system prefs / keyboard & mouse and notice that "Primary mouse button" is set to left again, so I click on "Right" again, close system prefs.
    The same thing happens again:(
    I tossed preferences for keyboard & mouse, repaired permissions, restarted...no dice. I'm on a powerbook g4 osx 10.4.7 & it's a logitech mouse (logitech's latest driver is bunk..I had it installed previously but uninstalled because the same thing was happening).
    The thing that bugs me is that i have an imac at work w/ 10.4.7 and it works fine with the same mouse!
    Anyone...please....
    Thanks!
    Powerbook G4 15'   Mac OS X (10.4.3)  

    Hey, thanks for getting back:)
    I'm using a logiech mouse w/ left & right click buttons. It's possible that if you're not using a 2 button mouse, "Right" does not appear in the Keyboard & Mouse system pref.
    I'm trying to make the actual right mouse button on my mouse my main click & make the left mouse button my right click. Basically I want to reverse the mouse buttons.
    About the test user account...if it does work correctly in the new account, how can I make it work in my main account?
    Thanks again

  • Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page...

    Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..

    [BUG FIXED, see "EDIT 2" at the end of my post]
    I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
    Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
    I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
    I hope this helps!
    EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
    https://github.com/greasemonkey/greasemonkey/issues/1406
    EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!

  • Back & forward buttons won't work after going full screen   

    I have a Logitech cordless mouse. When ever I'm watching a
    video, like on You Tube, and I go to full screen, my mouse
    back/forward buttons won't work, and I have to re boot my computer.
    I have tried every thing Logitech told me to do, but still have the
    problem. They think it's a flash player problem. I saw that one
    other person in the forums has the same problem. Any ideas?
    Thanks, Shawn.
    [email protected]

    I can't find the preferences section of itunes. where is it because it isn't at the very top of the screen and I didn't see it anywhere else. i hasn't told me that the back-up is corrupted so I don't know about that. I just know that it always comes up with the error message 50 when I try to get the back-up restored to it.

  • IPod nano gen 4 forward button won't work, and the hold switch won't either.  I've tried restoring it and it didn't fix the problem. Any suggestions?

    The forward button won't work and the hold switch doesn't either.  I tried restoring it, but that didn't work.

    Restore to factory settings.new iPod if you have not yet already. If still problem time for an appointment at the Genius Bar of an Apple store.

  • Left mouse button does not work after last upgrade on one computer.

    Second request -- left mouse button no longer works after latest upgrade. Uninstalled and reinstalled - did not help. Only affected my office computer. Left button works on other three search engines and other programs -- need suggestions...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • My ipod home button won't work or its jammed help

    My ipod home button won't work or its jammed or something help.

    I would if its still under warranty ask apple to repair it, thats what i did.

  • I loaded software updates to Settings now my lock button won't work. I was told to do a restore but it keeps timing out. I disabled virus software which didn't help. How do I get it to restore?

    I loaded software updates to Settings and now my lock button won't work. I was told to do a Restore but it keeps timing out. It says it will take 58 minutes to do the restore. I disabled my virus software but that didn't help. Any suggestions so I can do a Restore?

    Try the Manual Install discussed here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • Vertical scrolling with TrackPoint's middle button won't work on MS Word

    Question:
    I have a T42 ThinkPad and the vertical scrolling with TrackPoint's middle button won't work on MS Word and therefore not in my email either. Big pain in butt as I'm so used to using it. Are there any patches that fix that? Any ideas on why it won't work?

    It's really weird. My suggestion would be that you install the most up-to-date driver by direct downloading or via System Update (if you haven't updated the driver).
    Rockwill
    ThinkPad T61p 6459A12

  • My home button won't work

    My husband's I-pad has been playing up! His home button won't work, and this keeps happening.

    Try a reset ...
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    Beyond that, restore the iPad > iTunes: Restoring iOS software

  • My lock screen button won't work how can I fix this?

    My lock button won't work, every time I click it it won't lock my screen unless I press the button hard enough and or in a weird gesture, how can I fix this where I don't need to struggle locking it?

    Stating the obvious,
    Can you Reset it?
    Have you checked if the Hold switched is not in locked position? (should not see the red mark)

  • Whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?

    Hi
    I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
    I hope that was clear.
    Thnx

    Hello kmanthie,
    I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
    I worked on behalf of HP.

  • Portal Content Studio - mouse button does not work anymore

    if you use the portal content studio
    content-administration > portal-content
    you can configure the portal objects by browsing them and clicking the right mouse button.
    That worked but now the mouse button doesn't work - left mouse button works as expected (with left mouse button one can navigate through the objects, iViews, working sets, etc...).
    Right mouse button does nothing, portal objects could not be edited. Of course, the mouse is Ok.
    Is this strange error known?
    How to avoid it?
    Is there a possibility to reset this application, so it restarts/re-initializes correctly?
    Even a restart of SAP NetWeaver didn't help.
    Or can one use another method to perform an action instead of the right mouse button?

    reason were endorsed libs in the jre

  • My mouse can not click to anything left, right or the middle mouse button does not work

    I am using a 24 inch imac and the problem is suddenly my mouse can not click to anything left, right or the middle mouse button does not work i can see cursor moving and i can use the features of the keyboard but my mouse dies. I tried to plug in another mouse magic trackpad and my tablet but each has the same problem. I can not click to anything but cursor is moving and computer is not frozen. I have to shut it off from the power button when this happens. Do you have any idea what can cause this and how can i fix this?

    Reset the SMC 2-3 times. Click Intel iMac SMC and PRAM resets for instructions.

  • I just installed iOS 6.1.5 and now my power button won't work

    After installing iOS 6.1.5 and reinstalling the apps that it deleted from my computer my power button won't work on my iPod touch 4th gen.  Any suggestions?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

Maybe you are looking for

  • External Hard drive won't eject.

    hi, im new to the boards. just having an issue with my new external hard drive. everytime i use it or i use my cf card reader which is firewire it won't eject either. i've read there are special commands to go in and see what applications are running

  • 2 Questions re getting rid of songs & keeping little hands from downloading

    Hi, 1. Got my new iPhone last week but my niece nicely took it and loaded up some tunes from her itunes before i got to use it on my pc. Now when I plug it into my iTunes it wont open my iPhone details or let me delete what she put on for me- how do

  • Export Markers w/ SMPTE Timecode (subtitling-related)

    I am about to scream with frustration. I have a nice, long sequence on the timeline that needs to be subtitled. I've spent the last two days setting markers, extending them until the speaker's finished speaking, and transcribed what they said into th

  • Software cannot be installed on this computer

    Hello all I've been looking around this forum for a while now and have found similar problems to mine but there haven't been any exact answers to my question I was horsing around with my computer and managed to somehow foul up my btree on my internal

  • Create Package in $TMP

    Hi everyone, I am doing some practices and create all the practices program in local Package $TMP. now it seems a bit disarray, so I want to create some package in $TMP in order to sort out the programs. I create a Package $TMP_XML, the software comp