Powerline symbol colors are off

I use airline in (g)vim, and I've noticed the colors are off. The symbols display fine, but the colors..
It also happens in urxvt, which is actually where this screenshot's from.

I haven't had specifically the problem you are seeing, but it's possible the factory monitor profile is just wrong or corrupted.
Removing that Dell profile from within the Devices tab is required to get your system to use the system default sRGB profile, and if the sRGB profile doesn't give you accurate color (I believe the 2208 is a wide gamut monitor, so it probably won't) you may need to use a calibration device if you want really accurate color.
Some rules of thumb to consider:
If you want your non-color-managed output of sRGB files (e.g., most stuff shown by Internet Explorer) to exactly match what you see in Photoshop, just use the Windows default sRGB profile for the monitor profile (i.e., remove the 2208 profile).
If you want colorimetrically accurate color from your color-managed applications (e.g., Photoshop), then you'll want to remove the profile and specifically calibrate your monitor using a device made for the task. In this case, Photoshop and other color-managed apps will use the document and monitor profiles and accurately display your images, but non-color-managed apps will not, and will thus look different (in your case, much more saturated).
You might want to make a copy of that file (C:\Windows\System32\spool\drivers\color\SP2208WFP_DVI.ICM) in a safe place before making any changes; I'm not sure whether removing it from the dialog might actually delete it.
-Noel

Similar Messages

Colors are off

I've used previous Photoshop versions and recently upgraded to Photoshop CS5 (I've used the same Dell monitor with previous versions and it looked just fine before). For some reason the colors I use in Photoshop CS5's work-space are off.
For example, the menu and interface is the perfect grey color, yet when I select a grey on my workspace, it shows as a tan color (see attached image). The only way to make it show the true colors (its not just the greys, all colors are off), is if I select in View>Proof Setup>Monitor RBG, then select View>Proof Colors. Even in CMYK, the colors are off.
My Color Settings Working Spaces are set to:
RGB: sRGB IEC61966-2.1 (I've tried changing this to "Monitor RGB" and "Adobe RGB (1998)" and it doesn't help my issue)
CMYK: U.S. Web Coated (SWOP) v2
Gray: Dot Gain 20%
Spot: Dot Gain 20%
Even though it looks off, when I Save for Web, the greys and the rest of the colors are saved normally. So it's just in my workspace, which makes it hard to figure out what true color I'm using as I'm designing.
I don't understand why this is happening and how to fix it. I shouldn't have to turn on Proof Colors - Monitor RGB every single time I open Photoshop. And of course, I can't even view it with Monitor RGB Proof Colors on when I'm working in CMYK. Any suggestions?

I haven't had specifically the problem you are seeing, but it's possible the factory monitor profile is just wrong or corrupted.
Removing that Dell profile from within the Devices tab is required to get your system to use the system default sRGB profile, and if the sRGB profile doesn't give you accurate color (I believe the 2208 is a wide gamut monitor, so it probably won't) you may need to use a calibration device if you want really accurate color.
Some rules of thumb to consider:
If you want your non-color-managed output of sRGB files (e.g., most stuff shown by Internet Explorer) to exactly match what you see in Photoshop, just use the Windows default sRGB profile for the monitor profile (i.e., remove the 2208 profile).
If you want colorimetrically accurate color from your color-managed applications (e.g., Photoshop), then you'll want to remove the profile and specifically calibrate your monitor using a device made for the task. In this case, Photoshop and other color-managed apps will use the document and monitor profiles and accurately display your images, but non-color-managed apps will not, and will thus look different (in your case, much more saturated).
You might want to make a copy of that file (C:\Windows\System32\spool\drivers\color\SP2208WFP_DVI.ICM) in a safe place before making any changes; I'm not sure whether removing it from the dialog might actually delete it.
-Noel

Photos placed in muse are dull and colors are off

When I place a picture from photoshop into adobe muse the image looks dull and the colors are off from the original photo. I am saving the image in photoshop to a jpeg and then placing into adobe muse. Any suggestions?

In Photoshop chose Edit > Convert to profile. Here you can change the profile to sRGB and thake a preview of the result before apply the profile to your photo.

Print Problems / Colors are off - mixing colors / grainy/ banding

Printer is set up with ICC profile and uses RGB mode. Printed colors are extremely off - tons of white spots / lines / smudge marks in the ink & the colors seems to be mixing. High res images are printing out extremely pixelated.
Using Ricoh sg3110DN printer; subli-jet R inks
If anyone knows what causes any of the following issues, please help. Any input is much appreciated.

The colors being off, in the picture it looks like too much red, sounds like a misconfiguration of the printer and PS regarding color profiles.
I don’t have your printer, or one even remotely similar, so cannot comment on what to click on or what things are called in your printer driver, but typically what you do is, only have PS, or sometimes the printer, handling the color management. If neither is or both are doing color-management then things will be off, because either neither is correcting the colors or both are, when only one should be.
What you should try, first, is to turn off color management in the printer driver, somehow, using the Print Settings button at the top of PS's Print panel, then configure PS-Print to Color Handling to say Photoshop Manages Colors and specify the proper ICC profile into the Printer Profile area . This is probably the ICC you mention in your first sentence, or whatever ICC matches your printer model and specific paper and ink set you’re using.
Another possibility is that your monitor is not profiled and calibrated properly so the printer is showing the real colors and you’ve adjusted your images wrong. I think this is much less likely to be the issue in your photograph.
As for the other spots, lines, marks, I have no idea. Unless your image has noise or your camera sensor is very dirty, this are unlikely to be coming from PS, and may be some printer misconfiguration that is using the wrong amount of ink, or a printer hardware failure.
Message was edited by: ssprengel -- to make it applicable to Photoshop instead of Lightroom

My colors are off in one Photoshop, but not another.

I'm illustrating a book and working at both home and the office. At work, my Photoshop CS5 shows the correct colours, but when I export the file in any way, or open it up on my home version of Photoshop CS6, the colours show up much redder and vibrant!
The left are the colours that they are supposed to be, and the right is what I see at home and whenever I try to export the left.
I think it must be some preset in my CS5, since I've gotten the picture on the right both times. I've tried messing with the color management, but I can't figure it out. Could someone please help me? I can't continue on my book knowing the colors are wrong.

First, just to rule it out, make sure you have the same color settings. The really important thing is to have Color Management Policies set to "preserve embedded profiles". With this setting, the embedded document profile (whatever it is) will be correctly handled and displayed on both systems.
But I'm more inclined to think you have a broken display profile on your work machine, especially if only Photoshop seems affected. Photoshop is likely the only application that actually uses the display profile.
All this assuming you don't have a wide gamut monitor, which changes the playing field a bit.
Anyway. To test the display profile, set sRGB IEC 61966-2.1 as display profile in Control Panel > Color Manangement > Devices (Adobe RGB if wide gamut monitor). Relaunch Photoshop so that it can pick up the new profile at startup.
Do this on both machines. If they now display more or less the same, that's definitive confirmation. The real fix is to make a new profile with a calibrator, but if you don't have one, just use sRGB until you do.

Photoshop CS4 Save for Web JPEG Colors are Off

Ok, I've scoured the web to see about finding a solution for this and tried every possible option and still I'm coming up empty handed. I have a website that I'm developing for a painter and have an image converted to sRGB, and the colors are where I want them to be. I use Save for Web, and every iteration suggested online for the, embed and don't embed, convert to sRGB and dont' covert, use document color profile, use windows, yada yada. Here's a recent example:
when i preview the image with Firefox, here's the difference:
The photoshop version is on the left and is the color that I want/need. The image on the right is firefox and saturated. If I save for web with embedded profile, safari is accurate, whereas firefox is saturated, so it's obviously discarding the icc and using some color space that I can't see in my file. I did notice that if I have my Custom, Proof and select Monitor RGB, then I can see what firefox will ultimately display and also what Safari will display if i have Embed ICC Profile unchecked in the save for web dialogue box.
I know that CS2 and CS3 were easier and less squirrely with color managing web files, but I think CS4 has some juju under the hood. Am I the only one out there frustrated, or like other web developers just accept the inaccuracy and move on? Since this is fine art, I'm doing my best to dial the color in, but it's been all afternoon beating on this.
Any ideas, I'm ready to install CS3 and see if my life will be easier, but I'm wondering if having Photoshop CS3 and CS4 will cause any issues.

>> your logic
That's my rant and I'm sticking to it.
The OP wrote he doesn't want or need to discuss the pros and cons of embedding profiles in Web images, but for the sake of anyone else reading this:
1) Embedded ICC Profiles increase file sizes (about 4K per image).
a) I may have over 100 thumbnails and dozens of photos on one page,
b) Plus, I may have an image sliced into many pieces.
c) That additional 4k per image, per slice, will add up fast and may kill dial-up traffic.
2) Very few computers use color-managed web browsers or calibrated monitors anyway, and
3) Problems with matching/blending image's edges or background color with a filled box or page color.
d) If I tag the image — on Mac colormanaged browsers — the color will mismatch the box/page color on managed browsers because the tagged image is being Converted to MonitorRGB, and the untagged page or box color is having MonitorRGB Applied.
e) This matching or blending a pixel-based graphic to page color is a pretty big deal to do correctly in professional web publishing.
f) If I publish untagged sRGB images/graphics, the box/page color will match the images and blend correctly in all browsers.
I WILL QUALIFY my general recommendation about embedding profiles in pixel-based web images for the following reasons:
1) You are posting fine-art images, creative portfolios, and are not worried about adding 4K additional data per image, per slice.
2) You are not worried about having Mac visitors seeing graphic blends or photos mismatched to a background color.
3) You understand only properly-profiled monitors and color-managed web browsers will benefit from your embedded profile — and it is likely 99% of web surfers don't have either — however, if you are targeting the one percent who do, then there is your number one best reason for tagging web photos with embedded profiles.

Colors are off Help!

ok my son played with my keyboard and now my screen colors are in a photo neg format and i can't figure out how to change them back? if you have any ideas let me know please.

Hi JRowdenMT-
Greetings and welcome to the Apple boards
Hold down Control-option-command-8
Luck-
-DaddyPaycheck

Colors Are Off in Photoshop CS4

I've been having an annoying problem with Photoshop CS4 recently. The colors displayed in the application are way off--yellow appears tan, green appears grayish green, etc.--in the application. They look fine in saved files opened in other applications and even look fine in Photoshop's Navigator, as you can see in the screenshot below. I've chosen View | Proof Colors, tried different settings in Edit | Color Settings and View | Proof Setup, but nothing works.
Any ideas?
Thanks!

MarkARayKY wrote:
… I went into the Color Management control panel and made the sRGB IEC61966-2.1 profile the default for all users…
Oh, brother!
That's like burying your head in the sand.
Now you are not looking at an accurate display of the file in each computer.
Now you are looking at how the file looks like in any other computer with an ideal monitor that had its monitor profile set to sRGB.
Of course, if the monitor's native profile is close to sRGB and you're dealing with an sRGB file, then you'll get a pretty good approximation. But if you're dealing with a larger color space like Adobe RGB or ProPhoto RGB and/or a wide-gamut and larger-gamut monitor, the truth is that you have absolutely no clue as to what your image really looks like.
In sum, a monumentally bad idea.
Wo Tai Lao Le
我太老了

Canon MP600, Photoshop CS3, Dell Monitor - Colors are off

Hi everyone. I'm new here since I just came across a really annoying problem with printing from a Canon MP600. I wasn't sure if this was a printer problem or something that could be resolved by the software, so I'm just going to post here first and see. Also, I don't think this might be a monitor problem because the colors looked the same on 3 different monitors. :(
I just printed out something from my MP600, and it turned a vibrant red (apple-red) color from photoshop into a really ugly brown. Not only that but it turns everything vibrant into dull colors when I put "Auto" on color management for MP600 and not touch anything on photoshop.
The paper I used is a Canon Photo Paper Plus Glossy with full ink tanks.
Is it because the MP600 can't print oversaturated pictures? After searching the forums, I think what I need help in is printer profiles on Photoshop vs the ones on the MP600.
This is so frustrating for a person with a small free-lance printing business. >_< I really can't believe all the reviews for Canon MP600 and its superb printing quality.
I just noticed the profile sRGB IEC61966-2.1 and the print preview looks like what it should be. If I change it to one of the Canon MP600 profiles, it printed it out with a yellowish border where it's supposed to be transparent. Which profiles should I choose in order for it to print what I'm seeing on the screen? :(
Also, there's this checkbox "Match Print Colors". Would that change the quality of the print? I don't want to have to waste these expensive photo paper. :( Please help if you can. :(

>> your logic
That's my rant and I'm sticking to it.
The OP wrote he doesn't want or need to discuss the pros and cons of embedding profiles in Web images, but for the sake of anyone else reading this:
1) Embedded ICC Profiles increase file sizes (about 4K per image).
a) I may have over 100 thumbnails and dozens of photos on one page,
b) Plus, I may have an image sliced into many pieces.
c) That additional 4k per image, per slice, will add up fast and may kill dial-up traffic.
2) Very few computers use color-managed web browsers or calibrated monitors anyway, and
3) Problems with matching/blending image's edges or background color with a filled box or page color.
d) If I tag the image — on Mac colormanaged browsers — the color will mismatch the box/page color on managed browsers because the tagged image is being Converted to MonitorRGB, and the untagged page or box color is having MonitorRGB Applied.
e) This matching or blending a pixel-based graphic to page color is a pretty big deal to do correctly in professional web publishing.
f) If I publish untagged sRGB images/graphics, the box/page color will match the images and blend correctly in all browsers.
I WILL QUALIFY my general recommendation about embedding profiles in pixel-based web images for the following reasons:
1) You are posting fine-art images, creative portfolios, and are not worried about adding 4K additional data per image, per slice.
2) You are not worried about having Mac visitors seeing graphic blends or photos mismatched to a background color.
3) You understand only properly-profiled monitors and color-managed web browsers will benefit from your embedded profile — and it is likely 99% of web surfers don't have either — however, if you are targeting the one percent who do, then there is your number one best reason for tagging web photos with embedded profiles.

White Balance and Color are off!!! NEF D80

I was unable to get my images to appear as I shot them. I shoot with a Nikon D80 and shoot with a Vivid setting. Now after shooting a wedding of more than 1500 images I have to find a way to color correct them all. I have attempted the downgrade to the previous version, unsuccessful. I have forwarded on my comments to apple and find that this issue effects tens of thousands of photos. As a MFA student at a major university, and studying color management and workflow, I feel I need to look elsewhere for file management as iPhoto is not able to do the job and the fact that it affects my entire library system of photos... simply unacceptable. I have always found the discussion groups extremely helpful, but this issue has effected so many of us and is such a huge integral part of the photographic process that I need to look to other programs to effectively handle my color management.
Disappointing.
Daryn

You might look atMedia Expression as a DAM (digital asset management) application for your work. It's the M$ version of iView MediaPro which MS bought out. It is a professional DAM application. There's also Aperture, Bridge and Lightroom. You can learn more about these from professional photographers at the DAM forum: http://thedambook.com/smf/index.php
iPhoto is an entry level DAM application geared more for the home photographer.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Application capture, but colors are off

Hi all, someone in my group is doing an application capture
and the screen is coming out blocked in black and pixellated, any
thoughts?

Not enough information, jono54. Sorry, but ...
1) Are the black areas seen on full-motion slides, or on
static backgrounds?
2) What color depth is the
recording PC set to, as in 8bit, 16bit, 32bit color?
3) What kind of graphics adapter is being used in the
recording PC?
As you can tell, aside from the possibility of a full-motion
(FM) issue, I'm leaning toward the problem being with the graphics
hardware - or software - on the machine doing the recording ...
Thanks for more information ...
Larry

Photosmart 8250 colors are off

My Photosmart 8250 has suddenly started printing with either very red or very blue images. I did all of the printer tests, color calibration, etc. and those all are OK. I also have new or current ink cartridges, so that isn't the problem, but no matter how I manipulate the images in my photo software, the printed images are very red/orange or faded and blue.
Any suggestions?
Thanks!
TN

The paper sensor is used when the paper type is set to "Automatic", you can override this by setting the paper type manually in the driver.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

MX892 COLORS ARE OFF

My MX892 no longer prints accurate colors. For example, I print something thats green and the printer puts it out in blue.
The ink tanks are all full, and in their proper location. Any ideas?

Hi, tntmoul!
So that the Community can help you better, we will need to know exactly which operating system is running on your computer, along with which applications you're trying to print from. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Itouch has green tint to screen and colors are off like a convergence in TV

My brother showed me his Itouch and it has a green tint to it similar to a magnet to the old CRT computer monitors. How can I fix this I have tried updating and restoring the Itouch.

Hello, Welcome to Apple Discussions.
Below are your options.
Apple Retail Appointment - http://www.apple.com/retail/geniusbar/
iPod Touch Service Options - http://www.apple.com/support/ipod/service/faq/
Contact iPod Touch Support - 1-800-275-2273

On my screen the image is clear and the colors are right, However when I print to either my epson of HP the image color is off.

On my Mac screen my photo image is clear and the color are right, however when I print to either my epson 2200 or my HP printer bother the colors are off and the image is not as clear as on the screen.

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Powerline symbol colors are off

Similar Messages

Maybe you are looking for