Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
Jean

Thanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean

Similar Messages

Get WorkStatus from the other model issue (EPMWorkStatus)

Hello,
I’ve faced an issue with EPMWorkStatus formula. What I have:
       Two categories, let’s call them C1 and C2. C2 is a copy of C1 (was copied with standard copy package)
       In C1 there are some work statuses assigned
       In C2 there are no work statuses assigned yet
       I have two models, let’s call them M1 and M2. Work statuses are configured only for one model – M1. And the driver dimension presents only in M1 model
       Dimensions involved in work status assignment are Category (C type dimension), Time (T type dimension), P_PROJECT (U type dimension) and the driver dimension WFSTATUS (U type dimension)
         I have 3 statuses, let’s call them s1, s2, s3 (in this order)
       I have 2 connections: one to connect to M1 (let’s call it Connection1) and the other to connect to M2 (Connection2)
I have workbook saved in M2. And I need to get work status with EPMWorkStatus formula from model M1. It seems to be a pretty easy task – just to point “M1” (model name) in “Connection name” parameter of the EPMWorkStatus formula:
=EPMWorkStatus(M1,0,”C2”,[any Time dim base member], [any P_PROJECT dim base member],[any WFSTATUS dim base member])
But I faced an issue. The formula returns value “s3” though there are no work statuses set for C2 category because I just created it. And there’re also no records for C2 category in generated work status table for the model M1 (I checked it at SE16 transaction). That is the formula should have returned “s1” value.
I made some investigations and found out that if I connect using Connection1 (then change active connection to Connection2), then I got the correct results. But if I connect using Connection2, I always have the incorrect results. Even if I connect using Connection2 and then change active connection to Connection1 I have the incorrect results as well. So the results depend of what connection I used to log on (“Log on” button in Excel EPM tab).
I also found out that received status from the EPM formula when I connect to Connection2 depends of the status I have in the same scope for category C1. That is if I have “s1” status for C1 category, I will have “s1” status for C2 category.
How can I get the work status from the other connection?

Hi Mikhaili,
Save template by marking "do not store connection"
Go to edit report -> options and select "do not store connection"
Regards,
Shrikant

ICloud Mail couldn't be disabled from the iCloud Preference Pane.

I want to disable iCloud Mail, but, from my system preferences I get this error message:
" iCloud Mail couldn’t be disabled from the iCloud Preference Pane. Open Mail and remove your iCloud account from Mail preferences."
When I open Mail preferences, there is no account for iCloud.
I was going to try to set one up and delete it, but while it set up, I still can't see it so I can't delete it.
Please advise.

Hallo iKnewit!
I cannot really help you but I have similar problems after upgrading from 10.6.8 to 10.8.2! I have connection problems to IMAP Accounts. I got some helpful answers ...
https://discussions.apple.com/thread/4855685
Regards from Vienna/Austria
Andy

TS1424 I have used itunes forever, now when I try to go to the itunes store, it says an error has occured error code 3212, how do I get back into the itunes store

I have used itunes forever, Sunday night when I tried to get into the itunes store an error popped up and said could not open; error code (-3212), How do I get back into the itunes store?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this

<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

My apple keyboard had some problems, the store replaced it for me. I had to sign in to my computer, and couldn't get to pair the keyboard with the computer, as could not sign in. I know there is a command that lets you override this, does anyone know whic

My apple keyboard had some problems, the store replaced it for me. I had to sign in to my computer, and couldn't get to pair the keyboard with the computer, as could not sign in. I know there is a command that lets you override this, does anyone know which buttons to press. I gather when you do this, a box comes up and pairs the two with a number you have to type in.

Hi rpaspinall,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Apple Wireless Keyboard: Difficulty during pairing process
http://support.apple.com/kb/ts1569
Best of luck,
Mario

I have Elements 12 installed. When I am in the catalog, click on a photo, then want to open the Editor, I get an error message. If I click on Editor from the Welcome screen, I get the same error message. Why doesn't Editor work? Thanks.

I have Elements 12 installed. When I am in the catalog, click on a photo, then want to open the Editor, I get an error message. If I click on Editor from the Welcome screen, I get the same error message. Why doesn't Editor work? Thanks.

You'd better ask in the Elements forum.
Photoshop Elements

IChat Error: "Can't get video from the camera"

When I try to Screen Share with iChat on a local network, I receive the error "Can't get video from the camera" when I have an external camera plugged into the FW400 port on my Mac Mini. The Screen Sharing feature works great when the camera is not connected. Anyone know why this is and how to fix it?

Tell us about the Network you created please.
What make and model modem ?
Can it route (issue IPs) ?
IS there a router ?
Make and model of that please ?
If there are two devices which is doing DHCP if any are ?
IS there any computer that is sharing it's Internet Connection with any other computer ?
I take it from the title and the post that you infer you can Video and Audio chat ?
The Cannot get Video from Camera normally gets and Error Log pop up.
This can be opened with the reveal triangle on the left. The Details shown will have a Error number. Do you know what this log says ? (normally Error 20 or 21)
Old logs are stored in Users/(your account)/Library/Logs/iChatConnectionErrors by date.
IF you post an Error Log stop at the line that Says "Binary Images for iChat" as we don't need the bits below that yet.
As the Screen share in iChat uses an Audio component then the Camera if it is also the Mic needs to be ON.
In your case this may mean that in the ichat Video Menu both Camera Enabled and Mic Enabled should both be ticked.
(I have never seen an iChat error code for not (specifically) being able to get the Mic input so the message might be the only one iChat can pop up)
It does seem very odd that it only effecting Screen Sharing.
I have a Firewire connected DV converter that has two Firewire ports itself so I can input the camera feed to two computers. When this is in place the System also sees it as a Network.
I have also heard of one person with a Firewire Stills camera and I think the Storage space was seen as an External Device and therefore appeared Networked which is why I asked the first set of questions.
iChat does not like being in Two networks (a modem that issues IP address and a router doing the same or Wireless to a neighbour and Ethernet to your Own Internet connection, the Mac being the hub in a Share Internet connection, Wireless and Ethernet to the same router and using Parallels when set to Share the Mac's IP are the most common)
The Screen Sharing option in iChat > Video Menu is ON ? (at both ends ?)
As iChat's Screen Sharing is related to the System Screen Sharing and therefore Apple Remote Desktop you may find that in any routing device you may have to open ports 5900 and 5988 if not using UPnP
http://support.apple.com/kb/TS1629?viewlocale=en_US
You said Local Network. Do you mean this is using the Bonjour Buddy List ?
11:21 AM Saturday; June 14, 2008

I shot an iPhone5 movie, put it in iMOvie (9.0.4) couldn't get it on the desktop, put in in iDVD, couldn't locate the burn button. Foiled?

I shot a video on my iPhone5 (UPSIDE -DOWN!), put it in iMOvie and flipped it (successfully) and couldn't get it onto the desktop to email to someone. My computer told me I had to put into iDVD first in order to burn a DVD of it, so I did (took an hour). Then it said to click on the "burn button (shown below)". Well, there's no burn button that I can find. Plus there's no "Burn CD" option on any of the drop-down menus.

Hi ccandjs,
Welcome to the Apple Support Communities!
It sounds like what your are really trying to do is export the movie project to your desktop so that you can share it via email. What I would suggest in this situation would be exporting the movie via QuickTime to a location on your computer. Please reference the following article for instructions on how to do so.
iMovie Help: Export a QuickTime file
http://help.apple.com/imovie/mac/10.0/#move6e0cb2ad
If you want more information on using iDVD to make a movie, I suggest reading over the following information.
iDVD - Apple Support
https://www.apple.com/support/idvd/#
Have a great day,
Joe

Error while reading ID of own business system from the SLD

HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>DSM</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
Regards,
Anand

Hi Anand,
check the two thing's in XI.
1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
2. Create the business system based on above technical system and select the role of business system is Integration server.
URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Create the technical system based on your SAP R/3 system.
4. Create the business system based on your SAP R/3 system.
here you need to select role of business system : Application system.
related integration server is : <XI System SID has to come>
and try to refresh the initical cache once ...
http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
after all the things post what is the problem you are faceing.
Regards,
Venu.

Open script cannot get connection from the brower helper after 15 seconds.

Error:
===
Open script cannot get connection from the brower helper after 15 seconds. Do you want to continue waiting for the browser to load?
Please Note:
========
1. I have tried this only on IE
2. I am running OATS on a Remote desktop
Situation:
======
Trying to stop the recording
Try to get xpath of an object using Inspect Path
Setup details
========
Windows XP 5.1 Service Pack 3, x86
OpenScript 12.1.0.1.383
Internet Explorer 8.0.6001.18702
FireFox 13.0.1
Mitigation steps done till now:
==================
1. Disabled windows firewall
2. Disable XSS filter setting
3. Restarted the ATS services (3 of them)
4. Run the Open Script Diagnosis Tool (PS: There are 3 errros even after running it. The 3 errros are listed in the workspace_log log file snippet below...)
Error in worspace_log:
=============
To Change setting:
Go to Tools > Internet Options and Choose Security Tab
Select the Zone to modify and Press Custom level
Find Enable XSS filter Setting - Select Disable and click Ok
!ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
!MESSAGE Failure found when diagnosing Oracle EBS/Forms Load Testing Forms LT Diagnoser
!ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
!MESSAGE Did not auto-fix the problem.
!ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
!MESSAGE Suggestion for fixing: Please change your Java proxy setting to Use Browser Settings
Aprreciate help on this.

To resolve this, you need to reconfigure the "Oracle Application Testing Suite Helper Service" (OATSHelperSvr) to start as a user who has privledges to run open script tests rather than the default SYSTEM user.
Reconfiguring the OATSHelperSvr Service:
1. Open the services panel (Start > Run > services.msc)
2. Find the Oracle Application Testing Suite Helper Service
3. Right Click > Properties then select the Log On Tab
4. Specify an interactive user that has rights to run OpenScript (test by logging in as that user and running tests):
5. Click OK
6. Restart the service after dialogs are closed by Right Click > Restart
7. You should now repeat this process for the "Oracle Application Testing Suite Agent Service" (eLoadAgentMon) Service (Two services in
total)
You should now retry running the test in Oracle Test Manager

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

How do I get photos from the iPhoto import folder to the iPhoto library? It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library.

How do I get photos from the iPhoto import folder to the iPhoto library? It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library. I watched it upload about 400 photos, one by one. They're somewhere, but they don't appear in the iPhoto library. As iPhoto was deleting them from my camera, it got hung up, then a message came "you should eject before disconnecting a device." I hadn't touched the camera. The message came by itself. I couldn't get iPhoto to respond, so I disconnected the camera and did a Force Quit. Opening it back up, the pictures were gone. Can somebody help me?

What version of iPhoto are you running? Assuming it's iPhoto 9 or later Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

SLD Error in IE:Error while reading ID of own business system from the SLD

Dear Champs,
Scenario : JDBC to Proxy(APO system)
We are getting below error in MONI UAT Box. All other interface are working fine but we are facing issue for a particular Bussiness System also logical system are maintained properly.the same interface is working fine in other UAT box.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>R/3 Sys ID</SAP:P1>
<SAP:P2>"Client"</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system "R/3 Sys ID"and client "Clnt no"</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards,
Manikandan

Hi Mani,
Solution 1:
Check if the techncal system has associated Business system. I think there is something wrong in your SLD configuration and try to correct it.
Solution 2:
Create a Business system in the ID, and create the communication channel do the respective changes in ID ( I.e Receiver agreement, Receiver determination & Interface).

Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

Similar Messages

Maybe you are looking for