PP CS5 doesn't see MB Looks 2.5?

I'm running CS5 Suite:
I recently upgraded to Red Giant Color Suite / Magic Bullet Looks 2.5.
At first, PP was seeing this suite. I flew it into a short project in PP.
I got the red line above the video track, then press the edit key to render the
short 15 second clip.
The program froze. I rebooted and tried again, and again. Same thing happened.
So I contacted the tech dept. for Red Giant and they had me change a few settings
in MBLooks but the same problem kept occurring.
They then had me reboot PP while holding down the shift key. Then open the
same project and go from there. Well now, I MBLooks or Red Giant Colour Suite
is NOT showing up under my Video plugins anymore.
I've re-installed again but it doesn't show up in PP. However, it does show up and
works fine in After Effects.
Any suggestions on how to get this back and working in PP?
Thanks very much.
Mark

You may want to check with Red Giant.
Click on the Support tab:
Red Giant | Filmmaking and Motion Graphics Software

Similar Messages

  • Any fix for "CS5 doesn't see my video card"?

    I know there have been threads about CS5 not recognizing video cards on Windows 7 64-bit machines.  I was looking to see if any progress has been made in solving that problem.  My searches don't turn up anything.
    I'm running CS5 on a Dell 1645 with Core i7 820 and an ATI Mobility Radeon 4670 1GB.  The card has the latest drivers, is functioning properly, and is one of the cards Adobe lists as "supported" for OpenGL.  However, CS5 does not detect the card, and Enable OpenGL is grayed-out.
    I tried the workaround suggested in another thread, adding an "enable old GPUs" line to the registry, but that didn't work.  Is there any other fix?
    Doc_Pit

    Out of curiosity, do you have any "mirror" driver installed - i.e., something like PC Anywhere or RAdmin or other package designed to allow someone else to control your user interface?  These are known to get in the way sometimes.
    There is a registry tweak to force Photoshop to use the OpenGL features of your video driver.  It's for diagnostic use only, but it could serve as a workaround until you can get to the bottom of the driver problem (perhaps it will be solved in an upcoming release of the ATI drivers).
    Some of the information in this thread might help you:  http://forums.adobe.com/message/2954477
    Note that the registry tweak is good for diagnostic purposes, and enabling GPU acceleration where Photoshop does not believe the driver can support it can lead to instability and crashes, with loss of data.  It will be interesting to know whether the ATI mobility drivers can support proper OpenGL operation on your system.
    -Noel

  • PS CS5 doesn't see my ati 4870 card

    Hi All,
    I have a flashed ATI 4870 1 GB card and a Nvidia GeFroce 7300 GT card in my MacPro.
    The 4870 is my main card but PS CS5 is selecting the Nvidia as the main card. Is there a reason for this?
    Anyone else experiencing this?
    KJ

    Andy Oleksy wrote:
    Since I have the Apple branded 4870, the only way for me to run a second monitor is to either connect it to a second video card (in my case the 7300 GT) or buy a $30 dollar MD-to-DVI adapter. I went ahead and bought the adapter tonight (money I feel I should not have had to spend, since I already own a second video card). After connecting my second monitor to the 4870 via the MD port, CS5 Performance Pref Pane indicated that no video cards were detected! Strangely, all the advance OpenGL settings were available. Before, when the second monitor was connected to the 7300 GT, CS5 was detecting the 7300 GT, but only the basic OpenGL setting was selectable. As I said earlier, CS4 has no trouble detecting the 4870 with 7300 GT installed.
    Since there is no reason for me to keep the 7300 GT in my Mac Pro any longer (I don't have a third monitor), I uninstalled it. CS5 now recognizes the 4870 and all OpenGL settings are available. I haven't done much testing yet, but things seem a lot snappier than before.
    Glad you're up and running.  Enjoy!

  • CS5 Can't See Filters

    I just had to reinstall Photoshop CS5. Now I can't load (old) Kodak filters.
    CS5 sees the Kodak folder, but the filters don't show up in the list.
    The filters are:
    1. DIGITAL GEM Airbrush Professional Plug-In 2.1
    2. DIGITAL ROC Professional Plug-In 2.1
    They are 32 bit filters, so I am loading them to:
    C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Kodak\
    I've tried installing them directly to the above folder.
    I've tried installing them to where Kodak wants to put them and then moving them to the above folder.
    I've tried installing them to
    C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Filters
    instead of \Plug-ins\Kodak, still no joy.
    Each time I restart CS5 (32), it sees the Kodak folder but not the .8bf files.
    I even reloaded the originals from Kodak. CS5 doesn't see the filters.
    Thanks,
    Drew

    The significant file from the
    C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Kodak\DIGITAL GEM Airbrush Professional Plug-In 2.1
    folder is DigitalAIRProV2.8BF. It is neither Read-only nor Hidden.
    The same is true for the significant file in the other problem folder.
    I'm not sure what I'm looking for in
    C:\Users\Drew\AppData\Roaming\Adobe\Plugins
    The folders contained therein have nothing to do with user installed filters.
    I can manually add
    C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Kodak\
    as an Additional Plug-Ins Folder. That makes no difference. (It shouldn't be necessary because the root:
    C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins
    is the default.)
    The NoiseNinja plug-in located in
    C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\NoiseNinjaPlugin_Win32
    works just fine.
    So, why not the Kodak filters?

  • I have prepared a book on iPhoto, ready to buy book. There is amessage above about half the pages that says "drag photo to place in background" as if it doesn't see the picture there. Its a MAC 08X  10.6.8 and iPhoto '08 7.1.5. I have made iBooks before b

    I have prepared an 82 page book on iPhoto, ready to buy. There is a message over about half the photos saying "drag photo to place in background" as if it doesn't see the photo already there. I have spent over 20 hours getting to this point and can't bear to start over! Its a Mac 08X 10.6.8 and iPhoto 08  7.1.5. I have made other iBooks on this software and computer with no problems. Help please!

    Look for a page that has a similar layout:
    The one photo per page layout is the easiest to miss. Just click on a background color to remove the problem.
    OT

  • Migration Assistant problem? : New iMac's iTunes doesn't see the catalog or playlist of my old Mac's songs on an external drive

    So I just migrated from a 10.7.5 iMac 27" from 2009 to 10.9.4 on a 2013 27" iMac with Fusion Drive.
    I don't use Time Machine. There are no backups involved here.
    Used Ethernet. Only took 20 hours... (BTW, it stayed on "less than 1 minute left" for like 12 hours but luckily I was away and just left it going in hopes it would work... and it did!)
    Anyway, back on my OLD iMac, I kept all of my songs on an external drive because my internal drive was too small. So iTunes looked at that drive for the music it was playing. I turned that drive off, even disconnected it, during the migration process because I thought it was confusing it during the first attempt which took 10 hours and nothing happened.
    So now it worked, finally. On my new iMac, running Mavericks, I now have two user accounts... the one that was set up when I started the computer the first time, and the new one that transferred over via Migration Assistant. No problem. I can live with that. The only thing is, I would still think the old XML files and library stuff would migrate over... but iTunes doesn't see it. When I open up iTunes, in *either* account, iTunes behaves as if it's brand new. Repeat: the old and new account on the new iMac, both, do not see an old iTunes library which IS on the old iMac. Only the music is on the external drive from what I understand.
    I've done this before so I know it's possible. I remember upgrading a long time ago and got iTunes to see my old library... even though some of the music was no longer there. It just puts "!" marks wherever there is no link. I was hoping that that's what I would find when I launched iTunes, but no luck. Even connecting the old hard drive to the new Mac (via USB) doesn't make iTunes all of a sudden "see" the old library. That data doesn't seem to be there. It didn't transfer over. Did it not transfer over because the songs weren't on the internal volume? Should I have left my external hard drive on?
    So.... now that I've spent almost 3 days total trying to get this to work, and everything is running... I don't want to have to start over in order to get iTunes to work.  Is there a way I can just drag over some XML files or something from the old computer? I don't want to lose all of the ratings and personal notes and everything.
    I should add also that I have like only four songs I've ever actually bought through iTunes. I'm still a bit old fashioned and buy CDs and rip them to Apple Lossless. So I hope it's not an authorization / reauthorization issue because I have like 1400 albums ripped.
    Thanks in advance for any help.
    --Jeff

    iTunes does not use the .xml it uses the .itl
    If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

  • Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

    Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

    See for yourself which version of ACR is needed for that camera’s RAW files
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    then check your version (Photoshop > About Plug-In > Camera Raw).
    Your version of Photoshop does not support that version of ACR.
    You could use the free DNG Converter.

  • Dreamweaver CS5 doesn't start, cannot find configuration file

    Dreamweaver Could not locate the Resource file in the Configuration folder. This file is required to run Dreamweaver. Please reinstall the application.
    Dreamweaver CS5 doesn't start due to the error message above.
    Found the configuration folder but on my roaming profile on the server, not on C drive.
    Note that I installed Dreamweaver on the second partition of the hard disk, not on C drive due to lack of space. Other Adobe CS5 software are running well such as Photoshop and InDesign.
    I have tried to delete (after backup) the Configuration folder, as I read on this forum that it should be automatically recreated, but no success. Tried to copy the Configuration folder (in fact the entire Adobe folder) to the user profile on C drive, but no success.
    On this PC, no previous version of Dreamweaver has been installed. However, I have used older versions on different computers, and there are in the Adobe folder on my roaming profile traces of CS4 and CS6.
    Could you please advise?

    Not sure which thread you have read on this forum but I suggest read this official document and then see if resolves any lingering problems. 
    <http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html>
    Good luck.

  • IPhoto doesn't see my photos

    I was in middle of editing newly loaded photos, when the computer locked up. I had to shut it off to regain control. Since then iPhoto opens but doesn't see any photos in my libraries. Photos are still there, I can see them in finder and preview, but iPhoto shows zero photos. I have tried renaming library , creating new library, and opening different libraries, but iPhoto doesn't see photos in any of them. Any thoughts on how I can get back to my photos? I'm running Mac OS X 10.4.11, and iPhoto 2.0.1.

    Have a look at this article
    http://support.apple.com/kb/HT2042
    It has details on how to rebuild iPhoto Libraries prior to v6 - including v4 and v2.
    Of course, the best solution to your issues is to simply restore from your back up.
    Regards
    TD

  • Server Monitor doesn't see any sensors

    Hey,
    I inherited this Intel XServe and hot days like this make you take a closer look at the sensor data... all of which are invisible to SM.
    SM doesn't see power, temperature, and blowers. Their respective tabs show one entry under Location: None.
    I'm not using LOM but connecting locally via the loopback address.
    OSX Server 10.6.4, Server Monitor 1.8(5)
    Using 3rd party software like Temperature Monitor does read the temp sensor data fine.

    The way that Apple recommends for the Xserve LOM reset and reboot is to unplug the box. The LOM is an embedded computer riding atop the network controller, and always powered on when the chassis has power.
    For completeness, there's an ipmitool cold restart option for the bmc that might work, but (given the lack of documentation; Apple's recommended approach toward resets; this is a production environment; that haven't tried it) I wouldn't follow that approach.
    I'd also look at a network-enabled remote power switch for this environment. Cheap, and saves you the trip to the DC or the call to the DC staff.

  • My mac doesn't see my broadcast dv camera either in final cut or imovie

    Trying to take video we shot on professional panasonic camera and load it on the mac using imovie or final cut express. Imovie acts like it's importing but the file is empty (no media attached). Tried to move the files to drive but the macbook pro doesn't see the camera in the finder (using firewire or usb). HELP!
    Final cut express doesn't show the camera at all as a source.

    Lara,
    Without specific details we can't even begin to help you.
    What make/model camera shot the video? Are you trying to use the same camera to capture the video with iMovie or Final Cut Express?
    Exactly what codec/settings did you use for shooting the video?  DV? HDV?  AVCHD?  1920x1080i60?  1280x720p30?  Something else?
    Have you ever captured video from this camera before?  With this Mac before?
    If you are using a different camera for capturing purposes, what make/model is it?
    How are you connecting the camera to your Mac?  USB?  FireWire?
    Cameras generally do not show up in the Finder; but if you look in System Profiler you should see it listed under Hardware > USB or > Firewire depending on how it is connected to your Mac.
    What versions of OS X, iMovie and Final Cut Express are you using?
    In Final Cut Express, what Easy Setup are you using?

  • MacBook Pro doesn't see my Ipad

    Forgive if this has been posted elsewhere but i looked and could only find Ipod issues. All of a sudden my MacBook doesn't see my Ipad (1st generation). it just worked yesterday and I've done no updates and the cable is in working order. When i plug in the ipad to my laptop it doesn't even charge it. Can someone point in to a resolution other than the Genius Bar (not one in my country). sigh Thanks!!!

    redcookie wrote:
    The reason i noted that it doesn't charge when plugged in my computer is to show that i don't think it is an itunes issue. i don't ever charge it on my computer but when i do sync it and it is plugged to my macbook, it it does show that it is charging.
    That's great. I was just making a point. My iPad charges when plugged into my MacBook as well.
    Did you think about updating iTunes or uninstalling and reinstalling iTunes? The most recent version of iTunes is 10.4.1. I just updated my version today - with much apprehension I might add - and it did in fact clear up a couple of issues that I was having with my iPad.
    Don't give up!!!!

  • Compose email with formatting, receiver doesn't see it correctly?

    Hi,
    When I compose an email with mail.app and paste images into the text in strategic places, the receiver (using Windows or gmail as email viewer) doesn't see the email formatted correctly. That is, the images are just included as attachments, not appearing in the right place. However, when I look at the mail in "sent items" it looks fine.
    Is there any way to fix this? I actually had a friend say, "it doesn't look right on windows because you're using a Mac" -- is he right? Say it ain't so!
    slegge

    There are no set standards for inline attachments.
    If you look at the actual data stream you'll find that all the message text is sent first, followed by a data block for each attached file.
    Mail puts markers inline to flag where each attachment should be rendered, but that's specific to Mail and other email application may not understand or support that. In these cases the attachments are typically shown at the end, or in some other manner.
    The only real solution is to create HTML-formatted email, which gives you the same control you'd have if you were building a web page, but that's a lot more work, and not actually easy to do in Mail.app.

  • Indesign CS5 doesn't start properly

    My Indesign CS5 doesn't start.
    I can't see the program start, but if i go to the "active processes management" i can see it running.
    So, the program starts but i can't see his interface.
    My OS is W7 professional.
    This problem is affecting me since one week.
    I tried to uninstall and then reinstall it without results.
    PS. I have a Premium CS5 Suite, and the other programs works finely.
    Thanks for the support

    Ciao Peter,
    finally i got it! The problem was about the ID focus, where the application load.
    I have two monitor, managed by nView desktop manager. So ID was loaded far from my desktop, i don't know why.
    But most strange of all, ID was not showed in the application tab in the "active processes management" .
    So i disabled nview manager and ID appear.
    But this is a big bug of ID, which Adobe must manage.
    Thank you so much for your help.
    Ciao, Luca

  • My adobe illustrator cs5 doesn´t run

    Hello, my adobe illustrator cs5 doesn´t run since the last security update is it posible, because it was working good, please help me.

    Try creating a new account and see if that works. Then at least you'll isolate to some extent where the error lies. Your -108 error is:
    -108
    memFullErr
    Ran out of memory [not enough room in heap zone]

Maybe you are looking for