PP reports in Rep Mfg
Hi All..
what are the PP Reports in rep Mfg..?
Please do reply with respective transaction codes.
Thanks & regards,
Laxminarayana
Hi,
Please use the T.code SAP1. It will give list of all the Reports.
Check with reports under the heading of PP- >Repetitive manufacturing & Information system -> Repetitive manufacturing
Pradeep
Edited by: Pradeep Kumar on Apr 23, 2008 12:14 PM
Similar Messages
-
In-Process Quality Inspection in Rep Mfg
Hi..
We have Rep Mfg scenario , and we want to chk the material while in-process.
In the Mtl Mastr we have maintained Insptn type as 13 .
In Rate Routing we have maintained a operation with control key which requires Insptn characteristics n MIC is assigned in routing.
We have created a Planned order .
Now , requirement is dat system should not allow backflush activity until in-process inspetion rresult is recorded.
Whether Inspetion Lot gets created in Rep Mfg as soon as Planned Order is created..?
How to make the system to accomodate in - process inspection before backflush..?
Please guide me with soln
With Regards,
LNHi
Try by selecting reporting point in the rem profile.
suppose u have 10 operations ok
first 3 operations are production operation then 4th u want to go for inprocess inspection then for the 3rd operation select the control key as milestone key and 4th is quality control key with milestone confirmation.
Then when ever u go for backflush(MFBF) first u have to confirm the up to 3rd operation then 4th operation confirmation.
by this u can do the inprocess inspection scenario for REM -
Reports error REP-0069,REP-57054,REP-300
hi,
I am getting below error while running the report.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: Parallel query is not supported on temporary LOBs
SELECT DP.DES ==> CRIPTION AS "DEPARTMENT",
Plz suggest.
Tks,
Shubhen1 Please always write complete English words as opposed to IM-speak as 'Plz'. We are not teenagers.
2 Do not dump all error messgaes in the Database General forum. This is an Oracle Reports message and does not belong in this forum.
3 All error messages can be looked up in the online documentation.
This error message is self-explanatory.
Sybrand Bakker
Senior Oracle DBA -
Parameter Form not calling the Main report - Gives REP-0110, REP-1070, REP-0110 error
I am using run_report_object to call a report in which the user has to input some paramters. I have followed the instructions as in the Oracle White paper document on Forms/Reports integration.
The paramter report does come up but when I hit the submit button, I get an error
REP-0110: Unable to open file 'rclug005'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'rclug005
I've checked the privileges and everything's fine on that front. Also, I can get to open the report with the web.show document built-in with paramform setting = No.
I am guessing something's wrong with the html constructed in the parameter form which is,
<form method=post action="http://myserver/dev60cgi/RWCGI60.EXE?">
<input name="hidden_run_parameters" type=hidden value="server=myserver &report=rclug005&destype=Cache&desformat=html&userid=uid/pwd@test">
In the Report Before Form trigger, I've copied the foll. html code from the Oracle White paper,
vc_parameter_form :=
'<html><body bgclor="ffffff"><form method=post action="'||:p_action||'">'||
'<input name="hidden_run_parameters" type=hidden
value= "'||vc_hidden_runtime_values||'">'||'<center><p>
<table border=0 cellspacing=0 cellpadding=0><tr><td>
<input type=submit></td><td> width=15
<td><input type=reset></td></tr></table><p><hr></p>';
I've set the :p_action parameter to a value of http://myserver/dev60cgi/RWCGI60.EXE?
Also, In the end of the report before form trigger I added this
srw.set_before_form_html(srw.text_escape, vc_parameter_form);
Any help/tips is appreciated & Thanks.Thanks Danny,
I am building the variable exactly as in the White paper in the "before form" trigger using exactly the same values give there.
vc_hidden_runtime_values := 'server='||:p_servername||'&report='||vc_report_name||'.rep&destype='||:destype||'&desformat='||:desformat||'&userid='||:p_userinfo;
My report has some extra parameters too it expects. So do I have to include the names of those parameters too in the string above?
For example, in my report a user parameter is named 'print_date', which I do see and populate with value in the parameter form, then do I have to build that in the vc_hidden_runtime_values string above.
I am using Report 6.0.8.11.3 on 9iAS. -
Error in creating PDF's from 11g Fusion ware report server :: REP-0178
Hello Friends,
I am trying to create pdf files from the report server command line, It works fine when I run the command from ORACLE User but when I run it from any other user I get error
REP-0178: Reports Server rep_001 cannot establish connection.
Command line that I am using is :-
/abc/home/rwclient.sh server=rep_001 report=/abc/home/auto.rdf destype=file desname=/abc/home/report001 desformat=pdf userid=${ID}
I am using a personal copy of reports.sh in /abc/home/
It is also working fine when I run it from the browser report server link, the only issue is it didn't work through command line for any user other than Oracle.
OS : Linux x86_64
Reprots : Fussion ware 11g
Kind regards,
Aashish SharmaSmall update again,
I skipped using the downloadable oc4j/j2ee and tried using the one that came with 10.2.0.1 installation (patched to 10.2.0.3)
It starts up fine saying:
07/03/28 21:31:27 Oracle Application Server Containers for J2EE 10g (9.0.4.1.0) initialized
It started up all well with the downloadable latest containers too, but got different errors running the apex_fop.jsp file.
well with the version that came with the database it says in the PDF file after I tried to generate it from a report:
Error 500:
java.lang.UnsupportedClassVersionError: Bad version number in .class file
Anyone got any idea? -
CUSTOM REPORT PROBLEM - REP-1213
I am a student trying to complete a project. I developed a
"custom" report form which uses 5 tables to generate the report.
I have entered the 'fields' at various locations on the report
form and when I run the report I get the following error message:
"REP-1213: Field 'client_id' references column 'CLIENT_ID' at a
frequency below its group."
I have presented this problem to my instructor who does not have
a solution to resolve this problem for me. Is there a solution
for this? Or ... does Oracle not allow for 'custom designing'
of reports? How does someone develop a custom made invoice or
other report for a client without encountering these problems?
Anybody's assistance in this matter would be greatly appreciated.
BO
nullHere is some information that may be of help. This is straight
from Oracle. read the part on FREQUENCY ERRORS carefully.
You may also retrieve this document from:
otn home page --> support --> technicial bulletions -->
sql*reportwriter --> 9006913.61
P.S. reportwriter frames have kicked manny asses!!
Good luck.
Document ID: 9006913.61
Title: Understanding Frames
Revision Number 0
Product: Oracle Reports
Platform: GENERIC
Abstract: This document provides a better
understanding
of frames and the layering concept.
Also
discusses frequency errors.
Keywords: REPEATING;FRAME;VARIABLE;FIXED;EXPAND;
CONTRACT;FREQUENCY;
INTRODUCTION
There are two types of frames: Repeating frames and non-repeating
frames.
Each is a visual representation of actual 3GL code that underlies
the action
of fetching and printing the rows selected from tables.
Non-repeating frames
act as containers and can be mapped back to the pseudocode: BEGIN
and END.
Repeating frames are representations of the Fetch Cycle and can
be mapped to
the pseudocode: WHILE NOT END OF TABLE and END WHILE.
Graphically, frames are stacked one atop the other. This may not
be
immediately apparent. It is difficult to distinguish which frame
is beneath
another. A quick way to see the three-dimensional layering is to
change the
color of the frames. Make each frame a different color. This
will create a
three-dimensional effect as frames above will partially obscure
those beneath
it. You will also notice the layering structure when using the
object
navigator in Reports V2.5
NON-REPEATING FRAMES
Non-repeating frames are not record-related. They print as often
as the
object in which they are enclosed, or to which they are attached
by an anchor.
They do not have a print direction.
REPEATING FRAMES
Repeating frames are place holders for records. Repeating frames
print once
for each record of a group and control record-level formatting.
Reports will
generate one repeating frame for each group when you create a
default layout.
Reports will place containers of columns inside of the frames.
Each repeating
frame retrieves only one row in its fetch cycle for any one
repetition. Until
it is constrained by another frame, it will repeat itself until
the while loop
condition can no longer be satisfied.
VERTICAL AND HORIZONTAL SIZING
The Vertical Sizing of a repeating frame will default to FIXED if
all the
objects in the repeating frame are fixed. If the repeating frame
encloses an
object (e.g. field, frame) that grows, then the vertical sizing
defaults to
VARIABLE or EXPAND.
FIXED
If the Vertical Size of the frame is FIXED then the object's
height is the
same on each logical page, regardless of the size of the objects
or data
within it. Truncation of data may occur. The height of the
object in the
layout editor is the actual height of the object at runtime. No
special
symbol is indicated on the frame in the layout editor.
VARIABLE
If the frame's Vertical Sizing Attribute is VARIABLE and there is
nothing
below it, it collapses. For example, if it normally is four lines
long and
only one row is returned, then it will not print three blank
lines but will
actually collapse the output to one line. If you drag the
position of the
fields downward, the space above will not collapse because of the
IMPLICIT
ANCHOR. The object will expand or contract vertically to
accommodate the
objects or data within it. The height shown in the layout editor
has no
effect on the object's height at runtime. The vertical sizing
attribute
functions as if you used a combination of contract and expand. A
diamond
symbol is indicated on the frame in the layout editor.
EXPAND
If the frame's Vertical Sizing Attribute is set to EXPAND, it
will begin at a
minimum size defined by the frame, and will expand as necessary
to accommodate
more data or lines that exceed the length of the column. An
equal sign symbol
is indicated on the frame in the layout editor.
CONTRACT
If the frame's Vertical Sizing Attribute is set to CONTRACT, the
vertical size
of the object decreases if the formatted objects or data within
it are short
enough, but it cannot increase to accommodate larger data.
Truncation may
occur. A circle is indicated on the frame in the layout editor.
FREQUENCY ERRORS
You may receive frequency errors when a repeating frame is moved
or deleted,
thus changing the layering of the frames. Often, users may
attempt to correct
this error by adding the deleted frame back, but this does not
fix the
problem. The existence of the frame is not enough, even it is
does not
overlap other objects in the layout. The frame must also be in
the right
position within the hierarchy. In addition to recreating the
deleted frame,
you must push the new frame to the right layer using the ARRANGE
option on the
Layout menu.
If you move an object outside its native frame, then you must
enclose it
within a repeating frame to group it within the same loop.
Oracle Worldwide Customer
Support
null -
Month End Closing Procedures in Rep Mfg for PP
Hi..All
wat are all the steps involved in month end closing procedure in Rep. Mfg for PP module....??
plz guide me in this regard.
with regard,
LNHi,
From PP side nothing is required.
The month end activities are the responsibility of CO people.
Unlike Production Orders, no need of closing of Pl. orders or some thing like that..
All the month end activities are related to the PCC.
Hope this clarifies..
Regards,
Siva -
Hello all,
Please excuse my being too detailed.
After installing Forms 11g, Reports 11g in a new Windows 7 Professional 64bit machine, I was able to run both the Forms Builder and Reports Builder.
I then moved my forms and reports into a different folder, updated the FORMS_PATH and REPORTS_PATH in the registry, and added a key into keymap file:
C:\Oracle\Forms\user_projects\domains\ClassicDomain\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\cgicmd.dat
that allows hiding userid and password when calling up reports.
I then made a change to the following file:
C:\Oracle\Forms\user_projects\domains\ClassicDomain\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\rwservlet.properties
by adding the following line to force reload keymap:
<reloadkeymap>yes</reloadkeymap>
Having done that, I could call up reports from remote clients. Unfortunately, now I cannot run the Reports Builder.
Each time I tried, I would see a splash screen, then the usual process in task bar. But no builder appeared.
Right-clicking the process and selecting running the builder will produce a popup dialog declaring:
"REP-50125: rwbuilder.conf:java.lang.NullPointerException"
I have restarted the computer, restarting the Admin Server, Reports Server, etc., to no avail.
If I were to rename the rwbuilder.conf away, the Reports Builder will hang at the splash screen.
The shortcut I used to run the Reports Builder is:
C:\Oracle\Forms\asinst_1\config\reports\bin\rwbuilder.bat
The path to the rwbuilder.conf file is:
C:\Oracle\Forms\asinst_1\config\ReportsToolsComponent\ReportsTools\rwbuilder.conf
and its contents, which has never been modified since installation, follow:
<?xml version = '1.0' encoding = 'UTF-8'?>
<server xmlns="http://xmlns.oracle.com/reports/server" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/reports/server file:C:\Oracle\Forms\as_1/reports/dtd/rwserverconf.xsd" version="11.1.1.3.0">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>
<!--property name="cacheDir" value="your cache directory"/-->
<!--property name="maxCacheFileNumber" value="max number of cache files"/-->
</cache>
<!--Please do not change the id for reports engine.-->
<!--The class specifies below is subclass of _EngineClassImplBase and implements EngineInterface.-->
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" maxEngine="1" minEngine="0" engLife="50">
<!--property name="sourceDir" value="your reports source directory"/-->
<!--property name="tempDir" value="your reports temp directory"/-->
<!--property name="keepConnection" value="yes"/-->
</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" maxEngine="1" minEngine="0" engLife="50"/>
<!--security id="rwJaznSec" class="oracle.reports.server.RWJAZNSecurity"/-->
<!--destination destype="oraclePortal" class="oracle.reports.server.DesOraclePortal">
<property name="portalUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" encrypted="no"/>
</destination-->
<!--security id="rwSec" class="oracle.reports.server.RWSecurity">
</security-->
<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP"/>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV"/>
<job jobType="report" engineId="rwEng" securityId="rwJaznSec"/>
<job jobType="rwurl" engineId="rwURLEng"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>
<!--notification id="wfNotify" class="oracle.reports.server.WorkflowNotify">
<property name="connStr" value="%WF_DB_USERNAME%/%WF_DB_PASSWORD%@%WF_DB_TNSNAME%" encrypted="no"/>
</notification-->
<!--jobStatusRepository class="oracle.reports.server.JobRepositoryDB">
<property name="repositoryConn" value="repo_db_username/repo_db_password@repo_db_tnsname" encrypted="no"/>
</jobStatusRepository-->
<connection maxConnect="50" idleTimeOut="15">
</connection>
<queue maxQueueSize="1000"/>
<!--jobRecovery auxDatFiles="yes"/-->
<pluginParam name="mailServer" value="%MAILSERVER_NAME%">
<!--property name="enableSSL" value="yes"/-->
</pluginParam>
<webLayout port="9002" docroot="C:\Oracle\Forms\user_projects\domains\ClassicDomain\servers\WLS_REPORTS\tmp\_WL_user\reports_11.1.1.2.0\uqanoi\war"/>
</server>
Will really appreciate any help!
Thank you.
JacobHi,
This looks like it might be related to bug 6358304.
Go to My Oracle Support site (Metalink) Patchs & Updates tab. Then search for 6358304.
There is a patch downloadable for this which worked for me though I was getting the error when running reports via the server and not through starting reports builder.
However if you search the Knowledge base for 6358304 there is a work around available by editing the cgicmd.dat - specifically by adding a space at the end of the key you added to the file:
1. In the cgicmd.dat file, add a space at the end of the key line.
for example:
my_key: userid=hr/hr@oradb %* %P <--< add a space after the "P".
2. Additional workaround is to change from :
%* %P
to:
%P %*
Hope that works for you, otherwise I would recommend raising a support request with Oracle.
Cheers,
Toby. -
Postscript report fail - REP-3000: Internal error starting Oracle toolkit
Hi,
I am receiving the error REP-3000: Internal error starting Oracle Toolkit when I am running a conc. program with postscript as output. I changed Active Users program and tested it. It failed.
Metalink says DISPLAY issue. I ran the concurrent program - "Prints environment variable values" giving DISPLAY as variable. I received a value. like <hostname>:0.0
What could be the issue?
Release - 11.5.10.2
OS -Linux
Apache, Forms on 1 Node, Concurrent Manager on the second one.
Database - 10g R2 on Unix.
Thanks
Cherrish Vaidiyan
Edited by: Cherrish on Aug 19, 2010 5:01 PMHi Hussein,
Please find the complete concurrent program log:
Application Object Library: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDSCURS module: Active Users
Current system time is 19-AUG-2010 15:34:33
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.WE8ISO8859P1
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.28.0 - Production on Thu Aug 19 15:34:33 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 73686471.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 19-AUG-2010 15:34:46
I will check the old forums too.
Thanks -
Reports Server: REP-3000
Hi all,
I have the following system setup:
OS: SuSE SLES-7 Linux
Kernel: 2.4.7-64GB-SMP
Memory: 1GB RAM
SWAP: 2GB
When I try to run the test report on the "Getting Started with Oracle9i Reports" I get the following error in a new Browser Window:
- Error
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
I don't want to use the standard X server. I decided to use Xvfb.
I performed the following steps:
- Shutdown of Oracle9iASr2, according to metalink note: 200475.1 (oracle)
- $ emctl stop
- $ webcachectl stop
- $ dcmctl shutdown
After that the 9iASr2 instance was sucessfully halted.
- Shutdown the standard X server which was running on display number 0 (root)
- Start Xfvb as root, according metalink note: 208745.1 (root)
- $ nohup /usr/bin/X11/Xvfb :50 -screen 0 1024x800x8 -pn -fp /usr/lib/X11/fonts/misc -sp /etc/X11/xserver/SecurityPolicy &
- $ DISPLAY=$(hostname):50.0; export DISPLAY
- $ /usr/X11R6/bin/xhost +
I also tested to execute the command xclock and I got no error.
- 9iASr2 config changes (oracle)
- Changed DISPLAY variable in .profile to the new value
- $ORACLE_HOME/bin/reports.sh
- DISPLAY=lindi:50; export DISPLAY
- $ORACLE_HOME/opmn/conf/opmn.xml
- <prop name="DISPLAY" value="localhost:50.0"/>
- This entry is in the OC4J_BI_Forms config tag. is that correct?
- Startup 9iASr2 (oracle)
- $ emctl start
- Connect to OEM and started the whole instance. All processed were sucessfull started
- I was able to connect to OEM, this means the Xvfb Frame Buffer is setup correctly otherwise I would not be able to connect to the EnterpriseManager. Is that correct?
- I was able to check the failed jobs in the reports server. That means the report server is running.
- I was able to run my forms application.
- I open the "Getting Started with Oracle9i Reports" page in a browser and got the error decribed above.
To me it seems that there has to be another DISPLAY variable I did not set correctly. Because when I start another X server with the user oracle on display 0 then I'm able to run the report sucessfully. But I don't want to start the standard X server, because then I need access to the console, and I not always have access to it.
Does anybody know what that could be and help me,
thanks
OliverTry the solution provided in the Release Notes Addendum section 5.10.15 (Component issues)
Anyway I am providing the notes here.
5.10.15 Reports in-process server gives REP-3000 error when running report
When running a sample report using the report in-process server, an error message
like the following can appear in the browser:
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
Use the following sample URL to test for this error message using the appropriate
hostname, domainname, port and two_task entries:
http://hostname.domainname:port/reports/rwservlet?report=test.rdf&userid=scott/t
iger@two_task&destype=cache&desformat=htmlcss
If the REP-3000 error message appears, the display is not set correctly. When
running a report server from the command line, the environment variable DISPLAY
setting is used. However, the reports in-process server uses the following
configuration file for the display setting:
$ORACLE_HOME/j2ee/OC4J_BI_Forms/config/oc4j.properties
The default display entry is as follows:
oracle.display=:0.0
On some servers, there might not be an X server running on :0.0 or this entry
might not be resolved correctly. In such cases, change the display setting to a
machine where an X server is present and can be accessed by this server.
To test whether an X server is running on given machine and you have permissions
to connect to it, you can use the following command:
xterm -display myserver:0.0
If you do not have permissions to access the display or if there is no such display
running on the given machine, an error similar to the following is displayed:
Xlib: connection to "myserver:0.0" refused by server
Xlib: Client is not authorized to connect to Server
xterm Xt error: Can't open display: myserver:0.0
Once you have identified a machine with a valid X server, or started the display on
the server machine being used, you can change the default entry to the new display.
For example to use the X server running on myserver:0.0 we would change the
default entry to:
oracle.display=myserver:0.0
After these changes are completed, it is necessary to restart the Forms/Reports oc4j
instance with the following commands:
$ cd $ORACLE_HOME/opmn/bin
$ ./opmnctl stopproc type=oc4j instancename=oc4j_bi_forms
$ ./opmnctl startproc type=oc4j instancename=oc4j_bi_forms
You can now test the sample URL again to make sure that the in-process server
works correctly. When using the sample URL, the sample test.rdf report should
be displayed in the browser. -
Reports 9i rep-50003 HELP!
I am running reports 9i for the web on a solaris 8 box. I'm working on using the keymapping feature but it's not turning out too well for me. My querystring to my report is
"?TYPE=1&USER_ID=2281&TERM_ID=37&HOSP_ID=000000&efactdb"
my entry into cgicmd.dat is
"efactdb: userid=efact_testing/[email protected] %*"
This isn't working too well. I had used the key map directly in the JSP, but that didn't work either. Instead of having efactdb in the querystring I put it in the JSP like so
<rw:report parameters="efactdb">
Everything I've done gives me a "rep-50003: bad command line" error. Does anyone have any advice?Jeremy,
Firstly, you can use the showmap command to the rwservlet to see the contents of the keymap file (and each individual entry) - see the help page of rwservlet for more information. Can you see the efactdb entry in this list?
Secondly, there is a known issue if your key map file contains tabs instead of spaces.
Regards,
Danny -
Hi,
I face this error when i calling report from form.i am passing from date value in P_FROM_DT parameter in form.
Terminated with error: <br>REP-546: Warning: The value of restricted LOV parameter P_FROM_DT is not among the selectable values.
Please tell me what is the problem of this issue.
Thanks & advance,
MaranThanks for ur reply, i have solved this problem, In user parameters ,from date filed lov properties restricted check box should be unchecked if without values.
-
Reports Error - REP-0110 Rep-1070
Dear All,
When i try to open Report,
REP-0110 Rep-1070
error is showing.
Pl send the solution of open the reports.
Thanks
Regards,
Raghavan1 Please always write complete English words as opposed to IM-speak as 'Plz'. We are not teenagers.
2 Do not dump all error messgaes in the Database General forum. This is an Oracle Reports message and does not belong in this forum.
3 All error messages can be looked up in the online documentation.
This error message is self-explanatory.
Sybrand Bakker
Senior Oracle DBA -
Report Errors REP-1051 and REP-1070 when saving
I just created a new report. I'm now getting errors REP-1051 and REP-1070 when I attempt to save the .rdf to my local hard drive (or anywhere else for that matter). Permissions where I try to save it are OK, in fact if I remove the SQL and insert "select * from dual", it saves nicely. Is there a query size limit of which I'm unaware? The SQL runs corrrectly, compiles correctly, etc. I just can't seem to save my work. Thank you in advance.
REP-1051 and REP-1070 What are the messages for these codes?
Which version and OS are you using?
How are you calling your report? -
Report error : REP-771: and ORA-12162:
Hi , i run report and it terminated with error message
The report terminated with error:
REP-771: A fatal PL/SQL error occurred in program unit afterpform.
ORA-12162: TNS:net service name is incorrectly specified
does anyone know how to fix this issue
thxORA-12162: TNS:net service name is incorrectly specified
$ oerr ora 12162
12162, 00000, "TNS:net service name is incorrectly specified"
// *Cause: The connect descriptor corresponding to the net service name in
// TNSNAMES.ORA or in the directory server (Oracle Internet Directory) is
// incorrectly specified.
// *Action: If using local naming make sure there are no syntax errors in
// the corresponding connect descriptor in the TNSNAMES.ORA file. If using
// directory naming check the information provided through the administration
// used for directory naming.
$How do you connect to the database ? Did you try connecting from Sql*Plus using the same connection string ? Result ?
Maybe you are looking for
-
URGENT Hi, my ipod will not let me sign in to my apple id and my game center. i am fully connected to the internet but wont let me go on ifunny, instagram, etc. it will not let me sign into my imessage, itunes and my app store. i am very frustrated.
-
SWF not playing correctly in Flash Player
When I create a new SWF - only sometimes - the SWF shows (in Flash Player, Projector, Exe ONLY) up blank or missing quite a bit of the animation, buttons, etc. It plays fine when opened in the Flash application or as a "Test Movie" but not when opene
-
Tgere must b option to set password on individual app optional...
Activation LockWith iOS 7 or later, Find My iPhone includes a new feature called Activation Lock, which is turned on automatically when you set up Find My iPhone. Activation Lock makes it harder for anyone to use or sell your iPhone, iPad, or iPod t
-
How do I view and select photos to be imported in iphoto 6? The window is blank. I am importing from a family member's camera and I don't want all 981 of their pics.
-
Reconciliation account update for parked document
Hi, I have created a Customer parked document in FB70. Now If I go and check the FBL5N for customer account which is the part of the parked document, the transaction is appearing. But when I check the FBL3N for reconciliation account which is assigne