PPOME - org. unit - how to display a custom field in Basic Tab

Hi gurus,
I would like to show in detail box - basic info tab, a field added to IT P1000, to gather additional info's about the selected organizational unit.
Can anybody tell me where to start? I goggled a lot but I didn't find any useful information.
Thanks in Advance
Paolo

I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

Similar Messages

Add a custom field in output tab of po header SRM 7.0

Hello All,
Please let me know How to add a custom field in output tab of po header SRM 7.0.
Regards,
Neelima

Hello Neelima,
Have you already check the note 458591, which help to custom fields creation? I think this note can be relevant for you.
Best regards,
Denise Zanuz

For an Org Unit, how do we get all Reporting Org units (Also employees reporting to the sub org unit) & Employees ?

Hi Experts,
I have a very common requirement in SAP HCM ABAP development.
For an Org Unit, how do we get all Reporting Org units(Also employees reporting to the sub org unit) & Employees ?
I have tried using RH_STRUC_GET_MULTIPLE_ROOTS and RHPH_STRUCTURE_READ, but the evaluation path is insufficient to get all objects under it. I tried with both O-S-P and O-O-S-P evaluation paths and as per some constraints, I can’t create a customized evaluation path for a reason.
I am using PNPCE database for user selection screen and user would be advising the Org unit. I even referred the standard transaction ‘S_AHR_61016495’ which is using PCH logical database.
I would really appreciate if anyone could provide a solution for this. (Rewards guranteed )
Kindly help.
Thank you.
Regards,
Mahesh Konade

Hi Alexandre,
Although I could not respond in time, thank you so much for your prompt reply.
I had used the same RHPH_STRUCTURE_READ and passed the appropriate values to it, but it did not populate the required results. I cross checked the results manually, may be some relations issue. But later I tried using RH_STRUC_GET_MULTIPLE_ROOTS and it worked fine.
Meanwhile I had done a workaround with PCH and RH_STRUC_GET and it served the purpose of getting all the Org units, it’s reporting sub-org-units, positions and persons (The deepest structure from the root org unit advised on selection screen).
The solution I used is, I captured the org-units advised on selection screen by user using PCH logical database and then by looping on sub-org units reporting to the main org-unit I populated related positions and persons holding them and assigned it to the PNPCE logical database.
Thank you so much for the help.
Regards,
Mahesh Konade

How to add a customer field or extn coll in the tab1&2&3..of a UDO doc?

Hi Experts,
Does anybody know how to add a customer field or extn collection in the unused tabs like tab1&2...in a UDO document?
Thanks for your reply in advance.
Thanks & Regards,
David

Hi Subhasini - 
It seems you have discovered that adding an extension field to the Project Suppliers collection is not possible; many of the collections in E-Sourcing do not support extensions and, even when they do, typically, the table view of the data cannot be changed to show the extension value (it would only show on a "details" page, for example. 
The solution that you have proposed may work, although I think there is a slight mistake in your logic. I believe you are saying that the script would take data from the newly created extension collection and populate data in the out-of-the-box vendor collection. 
In thinking about your solution, I believe the benefit is that any logic and reporting based on the standard collection continues to function correctly (e.g., creating an RFx from the Project will use the out-of-the-box vendor collection). 
That being said, I generally am reluctant to do a "replace" of a standard collection with an extension collection as you propose. My recommendation is that you challenge the customer on the importance of this requirement. For example, could the code be maintained on the vendor record? Why is it maintained in Projects? If it is maintained in the vendor record, could you just populate a read only collection the Projects that shows the vendor and code? Could a report be written that can be launched from within the Project to show the values? How does the customer intend to use this field? Could the display name of the vendor object be the right place for it? 
I hope these ideas are helpful. 
Regards, 
Rob

How we can add custom field in standard report 2kee.

Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
Ravi

Ravi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

Displaying new custom field in

hi all expert again!
i created a new field in order.jsp. but i have no idea how to display this new field with value in orderstatusdetail.jsp, which user click on history link on the right side. this value should be collected from FM or extension table? can you let me know which java action to be interrupted to add this in?
can you all guide me please?
thanks!
appreciated your help.
Shanti

Shanthi,
1. Create a custom action ZMaintainBasketDispatcherAction. Extend the MaintainBasketDispatcherAction. In this write logic for the customerExitDispatcher method to forward to a custom action when the simulation is done.
Ex: String actionSimulate = (String)parser.getRequest().getParameter("simulatepressed");
if (actionSimulate!=null && actionSimulate.length() > 0) {
zforwardTo = "zsimulate";
2. In config.xml add a new entry for zsimulate and provide another action class like zsimulationaction.java
3. Here read the value of the field from the request and set it to the extension data of header/item based on the field location in order.jsp.
Ex: preOrderSalesDocument.getHeaderData().addExtensionData("obj","value");
4. Create a custom backend object for Order / Quotation. There, create instance for the ZCreateStrategy which will extend the CreateStrategy.
5. You will have a user exit available performCustExitBeforeR3Call where you can read the extension data that you set earlier
Ex: document.getHeaderData().getExtensionData("obj")
6. YOu can pass this data to backend FM which will be SD_SALESDOCUMENT_CREATE.
7. After function module is executed. implement the user exit performCustExitAfterR3SimulateCall
8. Again set the value back to the extension object.
document.getHeaderData().addExtensionData("obj","value")
9. Now in the ordersimulate.jsp read the extension obj and display it.
Hope this helps.
Pradeep

Control display fo custom field

Hi,
We are on SRM 7.1 ECS.
We ahev a requirement to create a custom field under BASIC DATA tab in shopping cart screen but we would like to display this field only if the item is a service item.
In SRM 5,we had to implement the badi BBP_CUF_BADI_2 for the same reqt.
But in SRm 7,how do we implement this?
Thanks.

Hello,
Customzie below entries in
SPRo-> Configure Control field->Configure Control for Fields on Item Level->Metadata for Fields on Item Level
Structure Field Name Z_fields
Bus. Object Type BUS2121
Bus. Object Subtype
Transaction Type SHC
Field visible : X
Field enable : X
Dyn. Customer Class z_CL_ITM_DYN
Dyn. Customer Method /SAPSRM/IF_MDF_ITM_DYN_CONTROL~CHANGE_METADATA
Create a Class z_CL_ITM_DYN with interface
/SAPSRM/IF_MDF_ITM_DYN_CONTROL and in method give /SAPSRM/IF_MDF_ITM_DYN_CONTROL~CHANGE_METADATA
In this Method /SAPSRM/IF_MDF_ITM_DYN_CONTROL~CHANGE_METADATA
use code below:-
DATA : ls_sc_item    TYPE bbps_sc_item_badi.
     MOVE-CORRESPONDING is_item TO ls_sc_item.
         IF condition
          IF iv_field_name = Z_fields .
             cs_metadata-visible   = abap_true.
             cs_metadata-enabled   = abap_true.
             cs_metadata-required = abap_false.
          ENDIF.
         ENDIF.
Regards,
Neelima

How to pass PO customer fields from ECC to SUS ?

Hi Gurus,
We defined a customer PO field at ECC side and want to pass it to SUS and diaplay it in SUS PO, my question is, how to pass PO customer fields from ECC to SUS?
Please advise.
Thanks and best regards
jack

Hi jackytam ,
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
you make get some pointers
regards,
Neelima

How to populate a custom field of a Std. SAP Tx with BAPI usage 2 Load data

Hi Experts,
For instance, I created a custom field (say, custom_field_1) on a screen of standard SAP tx(say, ME21N) by using screen exit. And in order to populate the data into it (custom_field_1), will use the Function user exits of this Tx(ME23N).
1) In next step, Where Where I have to add this field, apart from appending the same custom field in EKKO/EKPO table or any other related table; Extending the corresponding IDOC or creating a new Custom ÍDOC type? like What about BAPI?
2) If I got a text file with the data (including the data for this custom_field_1 too) and I have been asked to load it into SAP, then, I decided to use BAPI (say, BAPI_PO_CREATE or CREATE1) to create the data, So, How to handle this custom field, I mean, In which BAPI structure I have to pass this custom_field_1 data? ( Iguess, for some BAPIs EXTENSIONIN structures are provided, sorry if am wrong!)
Thank you.
Edited by: SAP ABAPer on Feb 21, 2009 7:40 PM

for example if you added field in the VBAP table then you can pass the custome field values like below
     move 'BAPE_VBAP' to lwa_extension-structure.
      lwa_bape_vbap-vbeln = lwa_final-vbeln.
      lwa_bape_vbap-posnr = lv_posnr.
      move lwa_final-yyslotid to lwa_bape_vbap-new custome field.
      move lwa_bape_vbap to lwa_extension-valuepart1.
      append lwa_extension to lt_extension.
      clear lwa_extension.
      move 'BAPE_VBAPX' to lwa_extension-structure.
      lwa_bape_vbapx-vbeln = lwa_final-vbeln.
      lwa_bape_vbapx-posnr = lv_posnr.
      move 'X' to lwa_bape_vbapx--new custome field.
      move lwa_bape_vbapx to lwa_extension-valuepart1.
      append lwa_extension to lt_extension.
      clear lwa_extension.
call function 'BAPI_SALESORDER_CHANGE'
        exporting
          salesdocument    = strcture
          order_header_inx = strcture
        tables
          order_item_in    =strcture
          order_item_inx   = strcture
          schedule_lines   = strcture
          schedule_linesx = strcture
          extensionin      = lt_extension.

How to add a Custom field in the Standard SAP Sales Order main screen

Dear Experts,
We have a requirement of adding a Custom field in the Sales Order screen. I know how to add the Customer field in the Additional data B tab of the Sales Order Header Screen as that is the screen user exit provided by SAP. Can someone tell me how to add the Custom field in the Sales Order main screen. Program Name - SAPMV45A and Screen Number - 4001. What is all I need to take care.
Thanks,
SNK.

I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

How to update a custom field in declarative workflow with VS 2013

Hello,
How to update a custom field in declarative workflow with VS 2013
any help would be appreciated!!!!!
Thanks regards, Vignesh.

Dear all,
I'm using 4.6C right now, i already implement BADI MEREQ001, but this only valid
for creating PR via ME51N.
I found an EXIT_SAPLEBND_001 and tried to implement it,
but i got another difficulties since how i transfer CEBAN structure to EBAN structure.
thanks very much.
Regards,
Billy

How can i add Custom fields into the

Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
Sajid

Hi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek

Add custom fields to standard tab in BP

Hi ,
I want to add a new field in address tab in communication area.
I tried doing through EEWB but the transaction creates a new tab and adds the new fields.Can anybody suggest how to shift the custom fields from the new tab to standard tab.
Many people have suggested BUCO transaction but it would be great if anybody can give the steps to do the same.
Thanks and Regards
aarthi

Hi Aarthi,
You can acheive your requirmetn through BDT tool. Have a look of the link <a href="http://help.sap.com/saphelp_crm50/helpdata/en/2f/696d360856e808e10000009b38f839/frameset.htm">BDT</a> , This might help you.
Reward points if it helps!!
Best regards,
Vikash.

Adding custom field in sales tab of BP transaction

Hi Experts,
There is a requirement to add a custom field in sales tab of BP transaction in 'Sales area data', above the field 'Customer group 1'.
Is it possible with BDT,else any other method to handle the procedure.
I think it is not possible with EEWB to add field in this screen of BP. Please correct me if am wrong.
Thanking you in anticipation.
Regards,
Santosh

Hi Santosh,
Refer the link **************** - Step by step procedure to enhance the BP using BDT.
Thanks,
Ritu

Custom field in Basic data screen of invoice entry screen

hello,
I want to add custom fields in basic data screen of Invoice entry in SRM 5.0.
As invoice Entry screen is divided into three parts:
1. Basic data Screen
2. Header data screen
3. Item data screen
Now according to OSS Note number 672960 we are able to add Custom fields in the header as well as item data screen of invoice entry without any difficulty.
but our requirement is to add custom fields in the basic data screen.
Is there way available to add custom fields in the basic data screen.
Thanks
Sarabjeet

hi
check this spro path
Financial Accounting (New) --> Travel Management --> Business Add-Ins and User Exits in Travel Management --> Entry --> Screen Modifications: Adjustment of "User Data" Screen

PPOME - org. unit - how to display a custom field in Basic Tab

Similar Messages

Maybe you are looking for