PPro crashes for only one user

We run Adobe CC 2013 on a Dell T7600, 32MB RAM, K5000 GPU. Lots of internal storage. Two identical systems have been running like a champ since 12/2013.
Long story as to why we're on CC 2013. Suffice it to say it still runs great, except for one user.
Ppro crashes every time they try to open an existing project. The rest of us can log on and open them without difficulty.
No recent installs of anything. THe user in question is a reliable user who doesn't do dumb things. All other users have no difficulty.
We have tried having them start PPro with the ALT+SHIFT key. We have deleted all Media Cache files for all users.
Below are snips of the Windows crash data.  Any ideas?

Hi,
I would suggest two things:
Rename the 'Adobe' folder in your Documents library to 'OldAdobe' and then try to open the project. If it fails, then
Create a new project, without importing anything go to Window > Workspace > Uncheck 'Import Workspace from Projects' . Then go to Window > Workspace > Reset current workspace. Save the project. Then see if it works.
Hope this helps.
Rameez

Similar Messages

  • Firefox crashes for only one user on startup, even after reset; safe mode OK.

    Current crashes do not even produce crash reports, but two crashes from earlier today did yield:
    bp-7013aded-0644-47d8-9967-b48a12141013
    bp-cb495f8f-7ae2-4b48-86ff-63b6f2141013
    Starting in safe mode shows the same installed plugins and two extensions that are enabled in profiles for other users on this system. It is only this user's Firefox that crashes on startup, even after a reset.
    Have also uninstalled and re-installed Firefox. Again, it crashes on startup only for this user.
    Windows event viewer does have several entries for an Application Error:
    Faulting application name: plugin-container.exe, version: 32.0.3.5379, time stamp: 0x54224e6b
    Faulting module name: mozalloc.dll, version: 32.0.3.5379, time stamp: 0x54221b67
    Exception code: 0x80000003
    but it's not clear that these entries sync up with the crashes.
    This crashing on startup began this morning; no new software or any other system modifications (that I'm aware of) for several weeks now.

    The hardware acceleration setting appears to be the culprit. After unchecking the Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available" setting, Firefox no longer crashes on startup.
    Initially I'd glossed over this setting since it isn't an issue for any of the other users on this system. I'm still puzzled as to why this would be an issue only for this user, and what had changed as of this morning that set it off, but obviously there's something about their configuration which triggers this situation, even for the default plain vanilla Firefox profile!
    Thanks, cor-el!

  • Program installed for only one user

    Have a program that is installed for only one user, how can I get another user access to the software? don't have install disk.
    Thanks

    Select the application's icon then Press COMMAND-I to open the Get Info window. In the Ownership and Sharing section check the owner and group assignments. If they have owner=you and group=you or staff, then you must change those. Open the Terminal application in the Utilities folder and enter the following command line at the prompt:
    sudo chown -R root:admin
    Put a space after "admin' then drag the application's icon into the Terminal window and press RETURN. You will be prompted for your admin password which will not be echoed.
    This should enable other users to access the application provided you have given the user access via their managed account preferences in Accounts preferences.

  • App lags/crashes in only one user account

    No test repos enabled,  Gnome desktop.
    Nautilus file browser is slow and will crash while opening some folders.
    Same issues with GTK pacman.  (only used for looking at packages. all package manipulation with pacman cl)
    This problem started over a month ago and only recently I'm trying to troubleshoot it.
    If I log in as test user or root, everything runs as it should.
    Would switching between the following  64bit packages to lib32 and  back to 64bit  possible create application problems in one user account?
    gnutls gcc-libs glib glibc glibgtk gtk gtk2 etc
    I have tried reinstalling packages including nautilus and even gnome desktop and gnome extras, removed any ~/ .nautilus files I could find etc.
    Any suggestions would be more than welcome other that creating a new user account.....that would be easy but I wouldn't learn a thing...
    I have searched and found many similar nautilus issues dating back several years, but the fix was usually package updates or reinstall nautilus.
    I have filed a bug at bugzilla gnome, but still trying to find a solution in the meantime.
    gdb nautilus <PID>
    (gdb) thread apply all bt
    Thread 2 (Thread 0x7f9965771700 (LWP 1994)):
    #0 0x00007f996ee6c3e3 in poll () from /lib/libc.so.6
    #1 0x00007f99701a7134 in g_main_context_poll (context=0x14c8a10, block=1,
    dispatch=1, self=<value optimized out>) at gmain.c:3093
    #2 g_main_context_iterate (context=0x14c8a10, block=1, dispatch=1,
    self=<value optimized out>) at gmain.c:2775
    #3 0x00007f99701a7a42 in g_main_loop_run (loop=0x14c8af0) at gmain.c:2988
    #4 0x00007f997149e144 in gdbus_shared_thread_func (data=<value optimized out>)
    at gdbusprivate.c:277
    #5 0x00007f99701cdf56 in g_thread_create_proxy (data=0x14c8b10)
    at gthread.c:1897
    #6 0x00007f996f108c60 in start_thread () from /lib/libpthread.so.0
    #7 0x00007f996ee747ed in clone () from /lib/libc.so.6
    #8 0x0000000000000000 in ?? ()
    Thread 1 (Thread 0x7f997325b760 (LWP 1954)):
    #0 g_atomic_pointer_get (atomic=0x14752b8) at gatomic-gcc.c:78
    #1 0x00007f9970ac1e23 in lookup_iface_entry_I (
    instance_class=<value optimized out>, iface_type=<value optimized out>)
    at gtype.c:561
    #2 type_lookup_iface_vtable_I (instance_class=<value optimized out>,
    iface_type=<value optimized out>) at gtype.c:616
    ---Type <return> to continue, or q <return> to quit---
    #3 g_type_interface_peek (instance_class=<value optimized out>,
    iface_type=<value optimized out>) at gtype.c:3099
    #4 0x00007f9971deecb0 in IA__gtk_tree_model_iter_has_child (
    tree_model=0x188a930, iter=0x7fff08de6360) at gtktreemodel.c:1251
    #5 0x00007f99696d02ff in count_rows (model=0x188a930,
    iter=<value optimized out>, end_path=0x1ae4390, count=0x7fff08de643c,
    level=2, depth=3) at gailtreeview.c:4436
    #6 0x00007f99696d031c in count_rows (model=0x188a930,
    iter=<value optimized out>, end_path=0x1ae4390, count=0x7fff08de643c,
    level=1, depth=3) at gailtreeview.c:4437
    #7 0x00007f99696d0558 in get_index (tree_view=0x1640760,
    path=<value optimized out>, actual_column=0) at gailtreeview.c:4374
    #8 0x00007f99696d3e4a in cell_info_get_index (tree_view=0x1640760,
    index=0x7fff08de6538, info=<value optimized out>) at gailtreeview.c:4142
    #9 0x00007f99696d4430 in find_cell (obj=0x184e200, i=103)
    at gailtreeview.c:4193
    #10 gail_tree_view_ref_child (obj=0x184e200, i=103) at gailtreeview.c:835
    #11 0x00007f996949d030 in ?? () from /usr/lib/gtk-2.0/modules/libatk-bridge.so
    #12 0x00007f9970ab1151 in signal_emit_unlocked_R (node=<value optimized out>,
    detail=434, instance=0x184e200, emission_return=0x0,
    instance_and_params=0x7f994c1aa770) at gsignal.c:3218
    #13 0x00007f9970abac85 in g_signal_emit_valist (
    instance=<value optimized out>, signal_id=<value optimized out>,
    ---Type <return> to continue, or q <return> to quit---
    detail=<value optimized out>, var_args=<value optimized out>)
    at gsignal.c:2983
    #14 0x00007f9970abb012 in g_signal_emit_by_name (
    instance=<value optimized out>,
    detailed_signal=0x7f99696dc055 "children_changed::add") at gsignal.c:3077
    #15 0x00007f99696d332d in model_row_inserted (
    tree_model=<value optimized out>, path=<value optimized out>,
    iter=<value optimized out>, user_data=<value optimized out>)
    at gailtreeview.c:2903
    #16 0x00007f9970a9febe in g_closure_invoke (closure=0x7f994c08a660,
    return_value=0x0, n_param_values=3, param_values=0x7f994c1aa6d0,
    invocation_hint=0x7fff08de6c10) at gclosure.c:766
    #17 0x00007f9970ab1a12 in signal_emit_unlocked_R (node=<value optimized out>,
    detail=0, instance=0x188a930, emission_return=0x0,
    instance_and_params=0x7f994c1aa6d0) at gsignal.c:3322
    #18 0x00007f9970abac85 in g_signal_emit_valist (
    instance=<value optimized out>, signal_id=<value optimized out>,
    detail=<value optimized out>, var_args=<value optimized out>)
    at gsignal.c:2983
    #19 0x00007f9970abae53 in g_signal_emit (instance=<value optimized out>,
    signal_id=<value optimized out>, detail=<value optimized out>)
    at gsignal.c:3040
    #20 0x00007f9971df92a1 in gtk_tree_model_sort_row_inserted (
    ---Type <return> to continue, or q <return> to quit---
    s_model=<value optimized out>, s_path=0x7f994c17c580,
    s_iter=<value optimized out>, data=0x188a930) at gtktreemodelsort.c:691
    #21 0x00007f9970a9febe in g_closure_invoke (closure=0x7f994c03fd50,
    return_value=0x0, n_param_values=3, param_values=0x7f994c1aa680,
    invocation_hint=0x7fff08de7110) at gclosure.c:766
    #22 0x00007f9970ab1837 in signal_emit_unlocked_R (node=<value optimized out>,
    detail=0, instance=0x17b96e0, emission_return=0x0,
    instance_and_params=0x7f994c1aa680) at gsignal.c:3252
    #23 0x00007f9970abac85 in g_signal_emit_valist (
    instance=<value optimized out>, signal_id=<value optimized out>,
    detail=<value optimized out>, var_args=<value optimized out>)
    at gsignal.c:2983
    #24 0x00007f9970abae53 in g_signal_emit (instance=<value optimized out>,
    signal_id=<value optimized out>, detail=<value optimized out>)
    at gsignal.c:3040
    #25 0x00000000004a1338 in report_row_inserted (model=0x17b96e0,
    iter=0x7fff08de7430) at fm-tree-model.c:622
    #26 0x00000000004a147d in report_node_inserted (model=0x17b96e0,
    node=0x7f994c1b0140) at fm-tree-model.c:689
    #27 0x00000000004a2591 in insert_node (model=0x17b96e0, parent=0x1bac790,
    node=0x7f994c1b0140) at fm-tree-model.c:880
    #28 0x00000000004a294e in process_file_change (
    directory=<value optimized out>, changed_files=<value optimized out>,
    ---Type <return> to continue, or q <return> to quit---
    callback_data=0x7f994c03fd80) at fm-tree-model.c:1015
    #29 files_changed_callback (directory=<value optimized out>,
    changed_files=<value optimized out>, callback_data=0x7f994c03fd80)
    at fm-tree-model.c:1029
    #30 0x00000000004b742e in nautilus_directory_monitor_add_internal (
    directory=0x16281e0, file=0x0, client=<value optimized out>,
    monitor_hidden_files=0, monitor_backup_files=0, file_attributes=259,
    callback=0x4a28a0 <files_changed_callback>, callback_data=0x7f994c03fd80)
    at nautilus-directory-async.c:778
    #31 0x0000000000505b49 in vfs_file_monitor_add (directory=0x16281e0,
    client=0x17b96e0, monitor_hidden_files=0, monitor_backup_files=0,
    file_attributes=259, callback=0x4a28a0 <files_changed_callback>,
    callback_data=0x7f994c03fd80) at nautilus-vfs-directory.c:106
    #32 0x00000000004a212e in start_monitoring_directory (model=0x17b96e0,
    node=0x1bac790) at fm-tree-model.c:1133
    #33 update_monitoring (model=0x17b96e0, node=0x1bac790) at fm-tree-model.c:1476
    #34 0x00000000004a2053 in update_monitoring (model=0x17b96e0, node=0x1a59fc0)
    at fm-tree-model.c:1474
    #35 0x00000000004a2053 in update_monitoring (model=0x17b96e0,
    node=0x7f994c08aba0) at fm-tree-model.c:1474
    #36 0x00000000004a2a7b in update_monitoring_idle_callback (
    callback_data=<value optimized out>) at fm-tree-model.c:1489
    #37 0x00007f99701a6bf3 in g_main_dispatch (context=0x14373f0) at gmain.c:2149
    ---Type <return> to continue, or q <return> to quit---
    #38 g_main_context_dispatch (context=0x14373f0) at gmain.c:2702
    #39 0x00007f99701a73d0 in g_main_context_iterate (context=0x14373f0, block=1,
    dispatch=1, self=<value optimized out>) at gmain.c:2780
    #40 0x00007f99701a7a42 in g_main_loop_run (loop=0x162a0d0) at gmain.c:2988
    #41 0x00007f9971d0f8f7 in IA__gtk_main () at gtkmain.c:1237
    #42 0x0000000000441867 in main (argc=1, argv=0x7fff08de7b78)
    at nautilus-main.c:544
    (gdb)
    Last edited by jeff story (2011-01-17 00:04:01)

    Same issue described in another topic: https://discussions.apple.com/message/20368268#20368268
    Confirming this is still issue with 10.8.2 (MacBook Pro Retina 15"), network disk connected to AirPort Extreme.

  • How to download an app for only one user

    I have an iMac running the latest version of lion and I want to download and app from Mac app store but I only want to download it for one user, how can I do that?

    If you wish for an app to only be available in one user account, create an Applications folder in the Home folder of that user account and drag and drop the app to that folder.

  • Reinstalling data from Time Capsule, but for only one user

    Hello!
    I just got a new-used MacBook Pro and need to use Time Capsule to retrieve my old hard drive's data, but I do not want to overwrite the existing data on the laptop's drive, since it is different, including the OS, I believe. I would like to split the disc, as it were, without partitioning it, for multiple users using Time Capsule. Can I safely use Time Capsule to put all the files only into one user account, or do I need to wipe the drive and partition...?

    Anna Scott wrote:
    Hello!
    I just got a new-used MacBook Pro and need to use Time Capsule to retrieve my old hard drive's data, but I do not want to overwrite the existing data on the laptop's drive, since it is different, including the OS, I believe. I would like to split the disc, as it were, without partitioning it, for multiple users using Time Capsule. Can I safely use Time Capsule to put all the files only into one user account, or do I need to wipe the drive and partition...?
    You can use the +Migration Assistant+ app to transfer one or more user accounts from the old Mac, without overwriting anything on the new one. Those will be a separate accounts, with the same logins as on the old Mac. Each user account will have it's own preferences, data, etc. See the pink box in #19 of Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum), for details.
    That won't "merge" two or more user accounts, since each user's data is private. You can do that manually, if you want, by copying data from one user account to another, but it's rather tedious.
    You may also need to be careful if there's a big difference in the versions of OSX and/or 3rd-party apps on the two Macs; you may have apps and/or data on one that aren't compatible with the other. In many cases, a newer version of an app will work with the data from an older version, but not vice-versa. You may want to check that out rather carefully first.
    If that's a "deal breaker," there may be a (rather clumsy) workaround; partition the internal disk, so you have, say, Leopard on one partition and Snow Leopard on the other. Then boot from whichever you want. In that case, you'd do a full system restore to the new partition, per #14 in the FAQ. That will only work, though, if the Pro will even run the other version -- generally, a Mac won't run a version of OSX that's older than the Mac's hardware.

  • Site looks different for only one user

    I just updated our Intranet for the service reps. The site
    uses the Spry Vertical Menu on the left hand side. I have one user
    who has the entire left hand side cut off which is where the
    vertical menu is, so she's not able to navigate around. I checked 6
    other users and they're all fine. I tried refreshing her page,
    deleting temps, deleting cookies. All individuals are using
    IE/windows xp. Is there something else I can try to get this to
    work for her.
    Thanks

    Or worse yet, is she using IE8 BETA?!
    --Nancy O.
    Alt-Web Design & Publishing
    www.alt-web.com
    "TC2112" <[email protected]> wrote in message
    news:fsend2$sa1$[email protected]..
    > Another guess without seeing the code..
    >
    > Does she have IE7 while everyone else is IE6? (or
    vice-versa)
    >
    >
    > "Nancy O" <[email protected]> wrote in
    message
    > news:fsen7d$s1f$[email protected]..
    > > Without a URL to see, this is just a guess.
    > > In IE, go to View > Text Size and see which size
    text she has her
    browser
    > > set to.
    > >
    > >
    > > --Nancy O.
    > > Alt-Web Design & Publishing
    > > www.alt-web.com
    > >
    > >
    > >
    > > "squirmywormy6"
    <[email protected]> wrote in message
    > > news:fsemc3$r5h$[email protected]..
    > >> I just updated our Intranet for the service
    reps. The site uses the
    Spry
    > >> Vertical Menu on the left hand side. I have one
    user who has the
    entire
    > > left
    > >> hand side cut off which is where the vertical
    menu is, so she's not
    able
    > > to
    > >> navigate around. I checked 6 other users and
    they're all fine. I tried
    > >> refreshing her page, deleting temps, deleting
    cookies. All individuals
    > > are
    > >> using IE/windows xp. Is there something else I
    can try to get this to
    > > work for
    > >> her.
    > >>
    > >> Thanks
    > >>
    > >
    > >
    >
    >

  • Burn a CD or DVD for only one user!

    Hi,
    How can I burn a CD or DVD that only my user can read?
    I go to backup my personal informations and want to sure that no other people have access to this CD.
    I use the Toast Titanium 7.1.2, but if other software can do this, I can buy it!
    Thanks to all!
    G4 Quicksilver, Cube and G5   Mac OS X (10.4.8)  

    Hi,
    Thanks to all. But now, I see some thing that make this idea of a disk image, not good. Lets say, that I burn a DVD with a disk image inside the DVD. If I get, just a little risk on de DVD, I lost all the informations. If I dont use a disk image, I lost only the information, in that little risk. And because I go use this as a backup, this problem with security is a problem.
    So, if somebody know another way, to burn a DVD, that only my user have access, please, let me know.
    Thanks
    Paulo
    G4 Quicksilver, Cube and G5   Mac OS X (10.4.8)  

  • ICal alerts not working for only one user

    My main user account stopped giving me iCal alerts. I can switch to another user and my test alert works. I've found a lot of information online but most seems to be for older versions of iCal. I have gone into ~user/Library and removed everything related to iCal. I even managed to finally delete the home calendar that seemed to re-appear. I managed to start with a clean calendar but no alerts. Is there an alert plist file that could be the culprit? I've done a global search in Terminal for anything under ~User/Library with "alert" or "notification" in the filename but can't find anything. I hate to rebuild an entire account again.

    It seems someone has set the user policy at webapplication level for that user.Check the similar thread below
    http://social.msdn.microsoft.com/Forums/es-ES/18b4f019-093d-45f6-92b7-8350d13bd663/let-us-know-why-you-need-access-to-this-site-why-do-i-see-this-error-and-who-will-give-access?forum=sharepointgeneral
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • InDesign (and Photoshop) crash on opening for only one user

    I just spent the weekend "fresh" installing all of my software and data onto a new computer (MBP OSX 10.7.5). I have CS5.5 Master Suite Install Discs.
    InDesign crashes on opening ONLY in my main "standard" account (Let's call it "Rebecca"). I'm prohibited by my university from regularly *working* in admin mode, but my admin ("Rebecca Admin") account opens and saves InDesign files totally fine. I also created a Test "standard" account in which InDesign works fine. I have tried (many times, orders, and ways for each solution):
    1. removing the preference files (and caches files)
    2. removing the SING files
    3. making my main accout the "owner" of the programs and their folders.
    4. running the Adobe July mini-fix icon updater (didn't work), tried to do the same "manually" (where I replaced the previous three files that the Adobe updater inserted).
    Nothing has worked.
    Photoshop also works fine on my admin account and the test "standard" account, but says that I have inadequate permissions on my main Rebecca account (even though Rebecca is the "owner" now). It closes after giving me about three info monologue boxes.
    I feel as though I have scrubbed the internet clean, and still have not found a solution. Any ideas?!?!?
    I just spent 3 full days getting the new computer up to speed with the old one (that I must turn in), so "moving" to the test account is not a nice thought. I also don't really want to have to log into another account just to use InDesign!
    Many thanks,
    Rebecca

    For anyone having similar problems, here is what solved the problem (that was clearly a permissions issue):
    Type into Terminal:
    cd /var/folders
    sudo rm -rf *

  • Updated OS10.6.8, laptop has 2 user accounts and now Firefox crashes for only one of two users every time at start-up. Other user runs FF fine

    Everything was running with 2 user accounts. Did sw updates incl. OS 10.6.8. Now the master account runs properly, including FF 12.0 however the 2nd account now crashes every time FF is launched. WIll not launch in safe mode either. This report is being submitted from the other account that still runs FF properly. Also downloaded FF to reinstal but a warning that I was installing OLDER version - even though I just downloaded the 'current' version. All this seems quite unexplainable! What's up???

    PhotogYogi wrote:
    I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
    By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
    Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

  • LogicExpress 9.1.8 crashes in only one user account

    LogicExpress 9.1.8 crashes when loading in just one of three user accounts.  Already tried deleting the preferences file.  Works fine in the other two accounts.  I'm still using OSX 10.6.8.

    Thanks. Well vs 3.6.8 is the latest FF. There is no Flash Player at all for any 64bit system. You must use the 32bit browser when Uninstalling/Installing and viewing Flash Content.
    For that to happen so suddenly sounds like some update of a program, Windows update, an Anti-Virus update had taken place. Any new program Installed or Uninstalled? Anything you can think of prior to that happening? It just sounds like a major conflict.
    You may want to take a look at your Flash files, perhaps some Flash file didn't get Installed properly.
    Go to C:\Windows\SysWOW64\Macromed\Flash  Open Flash and post back the files listed there. The NPSWF file(s) need a right click and then click on Properties to obtain the version number(s)
    Also go to Tools, manage add ons with IE and find Shockwave Flash Object..ActiveX Control..Flash10h.ocx and make sure it is Enabled.
    Using FF find the SWF vs 10.1.53.64 plug-in and make sure it is Enabled.
    Perhaps when FP crashed it caused something to change in both of the add ons.
    I had that happen to me a few months ago; Uninstalled an Anti-Virus/Installed a new version. Then couldn't see images on a website, and went to an Adobe website to check something and it told me I needed Flash Player to view it!!! Imagine my surprise:-) So that was the problem.
    Thanks,
    eidnolb

  • Business Purpose field hidden in ESS portal for only one user

    Hi All,
    We have one wiered error  while creating an expense reort in ESS portal and this is only for one employee out of 15,000 users.
    Problem:
    The additional information for expense type " Business Purpose " field was hidden for one employee and infact this is a required field and the rest of 14,999 users are able to see this filed while creating an expense report.
    We wern't able to replicate the same error in other systems like QA/ Dev boxes with the same authorizations and even from the same laptop. This user got the same problem even by  logging into different laptop.
    SAP ECC 6.0 -  Release 603 .
    Any suggestions or ideas will appreciate.
    Thanks
    Anil

    Thanks for the reply.
    We do not normally assign the Content Admin role in EP to the end user and his back end ECC role and EP portal role is 100% equal to the other users.   Audit won't allow to assign any special roles to end users.
    Anil.

  • Saved search not navigating for only one user

    Hi Everyone,
    I have a saved search that navigates for all users except one. Furthermore, on that same search screen if I use a different object type, do a search and save it, the saved search works for that user. So it seems like it is related to the object type I'm searching for.
    since it is working for some users, I don't think it is related to some IP or OP settings.
    any idea what could cause this issue?
    Thanks in advance,
    Ralph

    It seems someone has set the user policy at webapplication level for that user.Check the similar thread below
    http://social.msdn.microsoft.com/Forums/es-ES/18b4f019-093d-45f6-92b7-8350d13bd663/let-us-know-why-you-need-access-to-this-site-why-do-i-see-this-error-and-who-will-give-access?forum=sharepointgeneral
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • Flash audio player script played MP3 sped-up for only one user

    Hello all,
    My first post here; I hope this is the right forum for a
    general/newbie
    Flash question.
    I'm using a Flash audio player script that I got here:
    http://www.1pixelout.net/code/audio-player-wordpress-plugin/
    Here it is on the web page, a few lines down from the top of
    the blog post:
    http://mojomom.blogspot.com/2008/06/mojo-mom-podcast-momma-zen.html
    It's an MP3 of a podcast which has been working fine
    everywhere I've tested
    it. But we just heard from someone who says that when she
    tried it, the
    audio was sped up so that "the voices were like chipmunks".
    Anyone have any idea what might have caused that?
    Thanks very much in advance for any help,
    Patty Ayers | www.WebDevBiz.com
    Free Articles on the Business of Web Development
    Web Design Contract, Estimate Request Form, Estimate
    Worksheet

    I've reinstalled flash and checked that I have the latest version but this is getting ridiculous
    Everytime I want to use skype or itunes or iplayer, I have to log in as the other user, close down all their web browsers, then go back to my account to get it to work, much to the annoyance of the other user.
    Flash now: 11.1.102.55
    OSX: 10.6.8

Maybe you are looking for

  • How to extract the column width in ALv report if its executed in background

    I am executing an ALV report in background , in front end i am getting data properly, in back end for some columns some of the digits are missing.For example if PO no is of 10 digits it will display only 8 becos column size is like that , how to extr

  • Creating a "Boot into Windows" button/shortcut

    Does anyone know if there is a way i can create a "boot into windows" button for linux.  I would like to put it on my linux desktop, so when i need to boot into windows, i can shutdown arch and boot right into windows, without having to go through gr

  • Files and Streams java -- Sequential access file-- Plz help me

    I am able to add records in sequential file and then also I am able to display each record sequentially. But after closing the file if I open the file for adding records, the newly added records are not being displayed while clicking the "next" butto

  • Calling function defined in one package

    Hi, I have a package ABC. In that I have a function xxx(param1,param2,param3) I have a 2nd package XYZ. I need to use the above functionxxx in package XYZ and assign it to a vriable. How do i do it Please guide me. Thanks

  • Aggregate data

    Hi All I loaded data into Aggregate. Now i want to see the data in that aggregate.How to see the data. thanks in advance. reddy