PPT with embedded MP4 videos not being improted as a playable video - how can I make the MP$ play as a video?

I have a PPT slide presentation that has embedded MP4 videos (captured using SnagIt) in the presentation. When I import and convert, all my PPT slides convert with animations intact, but the videos are not playable and appear only as a 'static' slide.... I'm messing around with the trial version of Captivate hoping it can do what I think it can (like what I just described here) and am trying to cost-justify the purchase of this package to my management team -but I have to make sure it can do what we want it to do first - so far, no good - but I think I'm probably just missing something...any tips or suggestions?

Hi there
One way to accomplish your goal would be to use what I call: The Camtasia Approach
Basically you play the presentation and use Captivate to record it. Camtasia operates that way with PPT.
Cheers... Rick

Similar Messages

How can I make the wireframe identical for various video clips?

Hello,
For the end credits on a small movie, I would like the video clips to be much smaller, and the background to be black. I know how to make the clips smaller on the screen, and this is done by adjusting the wireframe.
I am trying to have the wireframe remain in its identical size and location across various clips but cannot figure how to do this other than change the wireframe independently for each single video clip, making it an approximate job.
Is there a way to ensure that the properties of the wireframe (size, position) remain constant for a series of clips? I have tried to find some properties settings for the wireframe which I could replicate for all clips but this search has proved unsuccessful.
Many thanks in advance for any help.

Use the Paste Attributes command as detailed in this link:
http://discussions.apple.com/thread.jspa?threadID=1987781&tstart=15
Instead of checking the Filters box, check the Basic Motion box.

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am frustrated with how my cursor jumps around while typing. How can I make the arrow follow the cursor so this doesn't happen?

Macbook Pro with OSX Yosemite: I am frustrated that when using Word for Mac, the cursor keeps jumping around all over the page. How can I make the pointer follow the cursor so this stops?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

With the new iOS7 how can I make the picture on my lock screen smaller or is this a glitch with the new iOS7?

With the new iOS7 how can I make the picture on my lock screen smaller or is this a glitch with the new iOS7?
I got the 5s and everytime I try and change the picture on my lock screen the picture is 10x way to big. I try and resize it and make it smaller but it will nto get smaller.
How can I fix this?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when i select the customer?

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer?
iselect the customer?

Hi bazza,
We won't be able to put the address from a formula into the same cell that you enter the customer's name. We can put the address in the cell under the customers name.
First let's take James advice and concatenate the address in the address table.
Here is the formula in G2
=CONCATENATE(B2&"
",C2&"
",D2&"
",E2)
It shows this way because after I clicked on B2 and typed [&"] (no brackets) I typed option-return
This gives you your new line. Then I typed the closing ". I repeated this for the rest of the address.
Next we want to bring this to your order sheet. I prefer using the two formulas OFFSET and MATCH instead of VLOOKUP.
base tells OFFSETwhere to start counting from. Click A1.
row-offset is for the row. we will use MATCH() -1 to give us the row.
What MATCH does is give you the row number where something is found and you can specify an exact match. I usually construct the MATCH formula first and then cut and paste it into OFFSET. MATCH looks like this: MATCH(A2,Table 1::A,0). A2 is what we are looking for, Table 1A::A is where we are looking (the entire column A), and 0 means we want an exact match. Can you see it inside the OFFSET formula? Notice that we had to subtract 1 from its result.
column-offset tells OFFSET which column A=0 so we want 6.
we ignore "rows", "colomns" we don't need them.
If this seems like too much, just break it down into small pieces.
quinn

TS2755 Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones a

Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones appear?

only way is to restore the phone as new. OR wait until IOS 7 comes out in the fall.

How can I make the popup with empty fileds and create new record?

I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
Thanks

You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
    public static void resetBindingValue(String expression, Object newValue) {
        FacesContext ctx = FacesContext.getCurrentInstance();
        Application app = ctx.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = ctx.getELContext();
        ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
        Class bindClass = valueExp.getType(elContext);
        valueExp.setValue(elContext,newValue);
    }

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

MOV is a wrapper that can contain many different codecs. The message you get is indicative of a distribution codec inside the MOV wrapper. You may need to convert the material to an editable codec before importing.

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

Click on the Hot Corners.. button and look at the four definitions. In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop. Set it to "-" to deactivate.

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

I have done a little experimenting: 1-close all open windows (I found that I had to do this step in order to keep Safari from hanging-will be explained later). 2: Remove all data in Prefs. 3: Immediately close the prefs window (no window should be open at this point) and quit Safari. Try to complete step 3 fast as possible; I have it down to a few seconds. The reason I urge you to close all windows is that Safari hangs until forced to quit upon immediately quitting after removing cookies. I think the auto page reload in Lion is the cause of these hiccups but I can't be sure about that. The hasty quit I found is crucial to success. Don't know why that is but it could prevent the data from re-populating. A quick flush, if you will. Hit me back if you need any of my suggestions clarified; a bit wordy, I know

How can I make the media size print option "custum" become available if it is not currently?

How can I make the media size print option "custum" become available if it is not currently?

See this article also: http://readwrite.com/2013/10/15/ios-7-fixes-iphone-4-4s#awesm=~oktbEwjOyyvr80

How can i change the quality from my buy videos from hd to sd for my ipod ?

How can i change the quality from my buy videos from hd to sd for my ipod ?
They hd videos are really big and i havnt enaught save place at my ipod so i only want them in sd at my ipod?
I know my english is bad but i hope you understand what i mean.
Thanks for help
Nelson

This is done through iTunes on a computer. You plug it in and under the Summary tab, you can chose what type of video quality you prefer.
You'll choose "Prefer Standard Definition Videos" from the bottom half of the Summary page

How can i make my keyboard not to appear on my i pad, how can i make my keyboard not to appear on my i pad

how can i make my keyboard not to appear on my i pad, how can i make my keyboard not to appear on my i pad? couse i want to play a game and is coming on the screen is really iritating ..

You cannot have the keyboard gone altogether, because it has to come up when an app needs input. The best way to do what you want to do is make sure that no apps are running when you are to go gaming: double click the Home button, swipe up all pages that show (not the app icon but the app page). then start the gaming. It it then still comes up, you look at what app is asking for it and set push notifiactions and autotarting off for that app in the settings.

PPT with embedded MP4 videos not being improted as a playable video - how can I make the MP$ play as a video?

Similar Messages

Maybe you are looking for