PR cannot be released via ME55

Hi Gurus,
Unable to release the PR via ME55 Whenever PRs are changed , we have created a PR with 2 line items and deleted one of the line item but not able to release the same with ME55.
Header level Release strategy is maintained for PR.
Kindly guide how to release the changed PR via ME55.
Thanks & Regards.

Hi Anil,
Please consider the definition of ME55 "Collective release":
You release All requisition Items or Complete requisitions that are
awaiting processing by your release code.
And also the definition of "the field overall release of PReq":
Determines that the items in a purchase requisition are ALL released at
at the same time (rather than individually).
That means:
If there are some items which can't be released (e.g. they are deleted),
the transaction ME55 can't be used - so you have to release over the
individual release.
There is a difference between overall release and collective release.
Overall release means that a purchase requisition is released on
header level and not on item level. Collective release means that
several purchase requisitions can be released at the same time.
When one line of a requisition subject to overall release is deleted
you are asked to use the "single release" functionality in transaction
ME54.
Once you delete a line item you must work with ME54(N) to release each
item. By deleting a line you effect the whole purchase requisition
hence collective cannot be used. This is the standard SAP functionality.
In this case, you have to individually release each requisition item
through transaction ME54(N).
BR
Nadia Orlandi

Similar Messages

  • ME55 error - Release via individual release

    Hi I have a question,..
    We are using overall release strategy.
    Now I have 2 line item in a same purchase requisition, and when run ME55 it show me the message "Release Possible".
    Then after that, using ME52N we change the requisition and cancel 1 of those items, of couse a new release strategy was defined by the amount we defined.
    But now, when go to ME55 now the messahe said "Release via individual release"... ann with ME55 cannot be release.. I need to go to ME54 and ME54N.
    Do you know why SAP do that? what is the reason of this?

    Dear,
    As available in SAP NOTES 668940
    Program error.
    This problem occurs after deleting one item of a purchase requisition. The consequence is that all documents created afterwards will no longer be releasable via ME55.
    Check the corrective information.
    Please also check: Note 69792 - ME55->ME54 Changes from ind.release updated wrongly
    Note 92315 - Call individual release - call transaction
    Note 72100 - Individual release - only allowed items
    Regards,
    Syed Hussain.

  • Often, Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted.

    Hello,
    Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
    I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
    Their are no apparent viruses detected.
    Firefox is version v5.0 and occurred in earlier release.
    System is Windows 7 (64bit).

    well, it's not the same hardware and it's a bit different.
    I managed to pass that stage somehow but I still have a problem
    I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
    I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
    when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
    is all the rest of the disk space)
    what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
    I'm trying to make this process as smooth as possible without having additional steps
    Tamir Levy

  • While releasing a PO an error showing PO cannot be released

    While checking the PO release an error showing PO cannot be released is showing.The release button is not appearing from the first code itself

    Hi,
    The following are the various reasons for the errormessgae.
    1. PO would have already released.
    2. PO would not have come under the perview of release u defined
    3.You would not have authorization for release M_EINK_FRG object.
    4.The charetarestcs defined will not come for this PO properties.
    ETc.
    Mostly , if all the config is setand done and working fine for other  POs tooo then this PO iswith the problem.
    Do you have this problem for other POs too with the same kind of PO?
    Regards,

  • Dunning letter cannot be released to multiple customers

    hi sap gurus,
    i did the all settings for dunning still  "Dunning letter cannot be released to multiple customers". can u pls help me.
    Thanks in advance,
    RAVI

    Hi mauri,
    Thanks for your reply
    I dont have authorization to view this can u send me the notes pls.
    Thanks in advance,
    RAVI

  • HT201493 My Wife and I share the same email address but each has an IPhone. We would like to have both of us individually on find friends but cannot do it via the email route. how is it done?

    My wife and I share the same email address but have separate IPhones. We would like to have each phone individually on "find friends" but cannot do it via email route. How is it done?

    make seperate appleID's if you wish to be frinds or if you wish to facetime video chat and if you wish to not recieve the samme imessage msg's unless you turn it off
    you can still set both your iphones to use an email address even if both have different appleId's
    the appleID is a handle not a link to an email address

  • Alternative sequences cannot be released

    Operations in alternative sequences cannot be released
    Message no. CO224
    im getting error msg while realease alternate sequence operation .
    for my alternate sequence operation Branch operation 0020 and return operation 0030.
    as of now my first operation confirmed .
    im trying to release my aternate sequence operation (as a second operation)
    Not all operations were released (see log)
    Message no. C2038
    once i see the log it showing the first above msg
    wat will be the problem.???

    Prakash,
    You must be talking about parallel sequences. Alternative sequences are the part of routing only. While order creation, one of the alternate sequence gets copied.
    By the way if not all the parallel seuences are released, you can release them separately also at sequence level or at operation level.
    1. Go to sequence overview, select the desired sequence & click on the green flag.
    2. Go to operation overview of the desired sequence, select all the operation & click on the green flag in the bottom. Your problem will be solved.
    Hope this helps you
    SmanS

  • Purchase Requisition Cannot be released

    Dear SAP Gurus,
    While doing ME54N to release PR. System showing the Error 'Purchase requisition cannot be released'.
    PR created on 23.04.2009 then PO Created against it , again PR was dereleased now again when going for release of PR system is providing the error as mentioned above.
    Message no. MEPO822
    << Moderator message - Everyone's problem is important >>
    Thanks and Regards.
    Anil Thakur
    Edited by: Rob Burbank on Nov 10, 2010 3:52 PM

    Hello Anil
    During this period any release stratergies changed for pr ?  after de release the pr just modified small value and make it same again this is nothing but refresh.
    then check the pr release
    Laxman

  • ERROR - PR CANNOT BE RELEASED

    Hi,
    user creates a PR(a/c assgnmt K),saves it.then finds she has to change cost center,does ME53N..does required changes & saves again.
    Now while releasing the PR(both thru w/f or ME54N) it gives error - the PR cannot be released.
    Pl resolve/advice.
    thanks

    Hi,
    First check the release strategy triggered or not before the release.
    If not check all the charactersticks u have mentioned in the PR.
    Regards,
    Cherry

  • Creative Cloud Teams member cannot log in via Desktop app

    Weird problem I have. Our company have 9 seat teams account, and one of our users cannot log in via the desktop app and use apps. Have worked just fine for the last year until today.
    He has the old Application Manager installed as well as he had upgraded from older apps, and we are renewing our yearly subscription these days. Could any of that be the problem. Odd thing is, he is the only team member that has this problem.
    He can log in to his account on the web just fine.

    Creative Cloud Help | Manage your Creative Cloud for teams membership may help

  • Purchase requisition workflow - reset release via BSP and BAPI

    Hello,
    We have a small workflow to release purchase requisition.
    A mail is send to the approver. The approver opens an BSP application to release or refuse the PR.
    The approval works well.
    The rejection doesn't work well.
    I use the BAPI_REQUISITION_RESET_REL_GEN to reset the first release of the PR (00 release key)
    We have 00, 01, 02 as release key, and all the release have to pass to release completely the PR.
    00 is the requester level.
    My problem is :
    for example I am the 01 level. I received the mail from 00 level, I refuse the PR via the BSP. In ME53N, the current release key is now 00 but when I look at the workflow, the following agent (corresponding to 02 release key) is determined. Normally nothing has to happen.
    Someone has an idea to stop the workflow ?
    thanks
    Véronique

    Hi Martin,
    When I checked the contain of container in the workflow (in the log), I saw that the release key is 02.
    I don't know why but the WF received the event RELEASESTEPCREATED instead of normaly it is finished.
    When I reset the release via ME54N, the WF ends correctly and no new event is received.
    How can't I see why the event is started in the BAPI.
    In fact it is very strange, if I used the BAPI alone, all works, no new event is started.
    But if I used the BAPI in my BSP, a new event is started.
    Thanks
    Véronique

  • I cannot purchase item via Clash of clan Purchase for Clash of clan game, the message is "Your Purchase Could Not Be Completed"

    I cannot purchase item via Clash of clan Purchase for Clash of clan game, the message is “Your Purchase Could Not Be Completed”

    If you also got a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Purcahse document cannot be released after PO reject using ME29N

    Hi gurus/experts,
    is it SAP standard behaviour that once PO was rejected using ME9N, the PO document cannot be release anymore ?
    if that is tha case, how can an approval reject the approval so that the release status can go back to previous release code ?
    TQ

    Hi,
    It is possible to go back into ME29N and cancel the rejection, then the purchase order is available for approval again.  The reject icon will change to a reverse rejection button after the rejection is done..
    Normal process is after rejection the buyer will cancel the rejection, make any necessary changes and save.  This will return the purchase order for approval.  The buyers changes may reset the entire approval process if they exceed the conditions configured for resetting the approvals.
    James

  • Purchasing Document cannot be released Urgent ?????

    hi
    when i try to unrelease the PO thru Txn ME29N
    the system gives the said message
    Purchasing document 4800003821 cannot be released
        Message no. MEPO823                          
    even when i enter the po no it on starts give the message
    wat may be the reason
    its urgent

    may be missing of Authorizations ?
    check ur SU53.
    regards
    Prabhu

  • Local item 0010 L  cannot be deleted via ALE

    Hi,
    I am trying to delete an line item from Sales Order BOM through BOMORD01 Idoc. When I process an IDoc, I am getting a message "Local item 0010 L  cannot be deleted via ALE" in log (SLG1). Could you please tell me how to correct this error?
    Thanks in advance.
    Regards,
    Balaji Viswanath.

    I customized IDOC_INPUT_BOMORD function module and setting memory id flg_ale = space.
    Regards,
    Balaji Viswanath.

Maybe you are looking for