PR not created after MRP

Hello SAP Gurus!
We are having a problem regarding PR creation.
No PR is created after running MRP and we have a lot of requirements.
What do you think is the problem?
How to check?
Thanks in advance

Hi again,
Kindly let me know have you check these 3 steps below for you
1) Requirement Planning for the corresponding plant must be activated in customizing for material management under consumption based planning -
>Planning------>Activate Material Requirement Planning
2)The Plant parameters for the corresponding plant must be activated in customizing for material management under consumption based planning->Plant Parameters-->Carryout overall maintenance of plant parameters
3) In the material master record, you have to maintain the MRP data of the materials that are subject to automatic plannning
Viz , MRP TYPE, MRP GROUP...Etc
If tthe above steps are ok then check the material master record of material of which MRP run is resulting in no Purchase requistion, Kindly check the MRP Views and see whether field of MRP Type is showing ND i.e. No Planning.
Change the same to consumption based planning and get your reults.
I hope this will solve your problem.
Regards,
Tushar Patankar

Similar Messages

  • Delivery Schedules not created after MRP Run for MRP Type PD

    HI All,
    I have created Schduling Agreement, maintained Source List with MRP Relevant - 2 option and maintained Vendor as Fix, maintained info record.
    I have created a material with MRP type as PD and lot size as EX, and strategy group as MTS. Now when i enter requirement through MD61 and do MRP Run through MD02, system is generating PR instead of Del Schdule line inspite of schduling agreement.
    But If i change MRP type to VB and maintain reorder point and maintain min lot size, then system generates Del Schdule lines for the same material.
    What could be the reason. I want delivery schedules based on MRP Type PD.
    Where I am wrong in MRP Views or in any cutomization. It seems that purchasing part is fine since it creats scudles line so no problem in SA or in Source List.
    Please help
    Regards,
    Vikas

    Hi Vikas,
    Go through this link you will able to customize correctly
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/3b/66596eda7b11d1b6330000e8a738dc/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d2da044af11d182b40000e829fbfe/frameset.htm
    Cheers
    Kris

  • Planned order created after mrp run instead of purchase req

    Hi All,
    I am facing a strange problem about planned order being created after mrp run jobs runs in background instead of purchase req. This is happening randomly. In the material master MRP view 2 procurement type is F and in the varient for the MRP job the in Purchase requisition control parmater 1 is marked that is purchase requisition. Also planning file is having the entry once there is shortage and hence MRP run is there always if there is shortage of material.
    With Regards
    Tarun

    Hi Tarun,
    Please maintain the control parameters as
    Processing Key                                       NETCH
    Create Purchase Requisition                          1
    Sched. Agreement Schedule Line                   3
    Create MRP List                                            1
    Planning Mode                                               1
    Scheduling                                                     1
    Please let me know the results.
    Regards,
    satyajit

  • MIGO should not create after PO Delivery Date

    Hi,
    We have a PO with multiple line items and diff. Delivery Dates...
    We want that during MIGO Process, Posting Date should not exceed to PO Delivery Date.
    Means, if PO Delivery Date is 05.07.2014, then MIGO should not created after this date...
    Please suggest.

    If you want to achieve the scenario with standard settings, then you can use the field "Latest GR date".
    Just put the same date as delivery date in this field. Then  system will not allow to do GR if the Posting date is exceed with compare this date in MIGO.
    You can find the latest GR date in Delivery tab in PO. Also you can maintain the field as mandatory in PO to avoid the field value blank as per your requirement.
    Also if you want to change Latest GR date along with delivery date, just take the steps which is explained in this document Mass changes from one field to another field.
    **Edited by: Dëv Päträ

  • PR created after MRP run, instead of schedule line

    Dear all,
    I want to create schedule lines automatically from the planning run, for raw material. I have maintained info record, scheduling agreement, quota arrangements and also the source list.
    For the raw material, safety stock of 1000 nos. has been maintained. The current stock of the material is 0.
    After MRP run, based on the upper level PIRs, schedule lines are generated properly. But, against the safety stock of 1000, a PR is generated.
    I donot want a PR to be generated.
    Please suggest a solution.
    Thanks in advance,
    Shrenik
    Edited by: Shrenik on Mar 8, 2008 4:17 PM

    Dear all,
    I checked an found that the schedule agreement date does not have any effect. Even if the requirement date falls outside the date range, i am able to create schedule lines.
    I also found that if i maintained GR processing time, then always a PR is created. If GR processing time is 0, then only schedule line is created. Moreover, planned delivery time does not have any effect on the calculations, even if it is 10 days, 20 days or 900 days.
    Can someone please clarify all these? How are these times taken into account?
    Thanks in advance,
    Shrenik
    Edited by: Shrenik on Mar 9, 2008 3:04 PM

  • Schedule lines are not coming after MRP run for HALB material

    Dear All,
    I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
    Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
    Pls let me know if I am missing something and guide me further on this.
    Thanks & Regards
    Kundan Kumar

    Dear All,
    I am closing this thread. As the vendor mentioned in scheduling agreement is not a subcontracting vendor. Its a individual vendor.
    Thanks for all the reply.
    Thanks & Regards'
    Kundan Kumar

  • Schedule lines not generated after MRP run

    Dear All,
    I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel  and its PurRqs when i check in MD04 ,  the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
    1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT  Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
    2.Maintained Inforecord.
    3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
    4. Quota arrangement for this vendor only.
    5. Created New scheduling agreement.
    6. Material is not sent for subcontracting.
    7. Ran  MD02 with following parameters ,
    Processing key NETCH Net Change in Total Horizon
    Create purchase req. 1 Purchase requisitions in opening period
    Delivery schedules 3 Schedule lines
    Create MRP list 1 MRP list
    Planning mode 3 Adapt planning data (normal mode)
    Please let me know if i am missing something
    Thanks in Advance
    Benny

    Hi,
    Please check the below links...
    Schedule Lines not getting created in MRP
    Schedule Lines not generated for MRP Type PD
    Kuber

  • Schedule Lines not created from MRP

    Hi !!
    I have a finished product ""111-2523-64"" and in its BOM i have a semifinished product ""111-2523-64-010"" produced(Inhouse)& three raw materials .
    For the Raw Materials I have made the scheduling agreement & source list with indicator ("2"" create schedule lines automatically""
    Problem -: Now when I run the MRP using T-Code MD02 the system is planning the finished & semifinished product 
    *but no schedule lines are created for the raw materials.*
    Please Guide , Itz very urgent.
    Regards
    Rahul Bhardwaj
    9909986406

    Dear Rahul,
    When u r running MRP maintain '3' for Delivery Schedules Field under MRP Control Parameters ( T Code MD02). Sheduling Agreement should be valid. If there is sufficient stock on hand compared with the requirement then system will not create any Schedule Lines. In material master of raw Materials on MRP2 view Procurement Type should be Maintained as 'F'. If u have maintained 'E' or 'X' then MRP run will not create schedule lines.
    Regards
    Sunil Kumar

  • TR was not created after MIGO

    Hi, experts
    Sometimes after I did goods receipt with MIGO for purchsing order, the TR was not created by system. Normally after MIGO system create material document and TR at same time, then I use LT06 with reference the document no. place it to the storage bin.
    But for this case, no TR generaged. I can only use LT10 /mvt999 to move them to the storage bin.
    Can you please tell me the possible reason for this problem( TR not created)?

    Can you please check what is the movement type being used ? If you were able to use LT06 in some cases means that most probably 101 is correctly defined in LE--> Interfaces --> Movement types to trigger the TR's.
    1) however, if you are using / different movement type is being triggered and is not set up to create the TR.
    2) If you see that the movement type is still 101, you could still be creating the TR's in the background, however, if you have a background job or some other transaction that is confirming the open TR's , this could be one of the reasons why you are not able to use LT06.
    For this you can go to MIGO ( go to display tab for material document) , go to WM tab and find out the TR # there.
    You can then go to LB03 and if you scroll to the right , you will find the TO # created.
    Please go to LT21 and check who and how the TO is being created / confirmed, if thats something out of the process for you.
    Thanks

  • PR not created after creating 3rd Party Sales Order

    Hi SAP,
    We have 3rd Party Sales Order process. The Problem is, PR number is not generate after creating 3rd Party Sales Order.
    the problem happen for particular customer only. I already check the credit limit and its okay.
    need help,

    If the PR is not getting created, please click on the Incompletion log in the SO to check for any missing data.
    If it is complete use VKM3 transaction to check if the SO needs a credit release., if needed relase the SO and the PR will get generated.
    Check if the material is maintained for purchasing or not.

  • PO not created after complete Approval of SC.

    Hi Experts,
    I am working with classic scenario with SRM 7.0.
    I have an issue related to creation of PO at backend.
    After complete approval of SC PO is not created in backend. The status of SC is showing as Approved.
    There is no error in RZ20 or Application monitor.
    Can you give some touch points where can I find some errors or reason for this.
    Where can I check the PO create BAPI is called on approval of SC.
    Please help me in this regard.
    Regards,
    B.N.Karthi

    Hi
    go to your BBP_PD
    click item data
    and search for your PO ?
    you must have PO there ?
    or check ANY ENTRY IN BBP_DOCUEMNT_TAB
    Do YOU have valid source of supply?
    E_OBJECT_ID-BBP_PDBEI - WHAT IS THER INSIDE?
    As laurent staed below, you must check item status too :- it could be purchaser work list too or error in process or can not be ordered...
    Muthu

  • COPA DOCUMENT NOT CREATED AFTER BILLING

    HI
    COPA document is not created while doing the sale order cycle
    I’ve carried a standard sales cycle that contains sales order (VA01),
    Delivery (VL01n) and billing document (VF01). System should generate 4
    documents as follows
    1) FI Document
    2) CO Document
    3) Profit Center Accounting Document
    4) COPA Document
    But in my case only 3 documents are generated instead of COPA.
    I completed the total COPA configuration with creation of operating concern and assigned SD condition types. And also maintained number range for actual copa line items.
    Fllowing things are done.
    1) assignment of controlling area to Operating concern .
    2) controlling area setting activate profitability analysis.
    3)Valuation Strategies are assigned to the Points of Valuation in ke4u.
    4)SD Quantity Field to a COPA Quantity Field (Normally FKIMG assigned to ABSMG).
    when we excute the transcation  KE4S system display the error  Document "XXXXXXXXXX" is not profit-related and thus could not be transferred.
    when we go back  to the Billing Document in the Change mode, click on the PSG button in Account Assignment it is showing some characterstics also.

    Hi
    I have already mentioned in my pervious mail what the activities done by me. Quantity filed are already assign KE4M.Please do needful for me and give me suitable answer.

  • MP Related Logs and IIS Virtual directory not created After re_installation of SCCM 2007

    Hi
    We have re-installed the IIS and SCCM secondary site. tried to intsall the MP role and DP role but it has not created any logs or IIS virtual directory in the secondary site server which is in WAN link.
    Trouble shooting:
    - checked the ports 443,445 and 80
    - Disabled symantec
    - exchanged the public key ( still it is in progress in Despooler log)
    - checked the site to site permission and added the accounts.
    please suggest further.

    Yes, I know this is an old post, but I’m trying to clean them up.
    What error(s) are you getting within the logs? Without these details there isn’t much anyone can do to help you.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Promotion Condition (VKA0) Not Created after activation

    Hi
    We currently activate promotions using WAK5 and WAK16. On WAK5 you can see the status of the sales price condition is set at B, however the VKA0 condition is not created.
    In the process we perform supply source determination 45 days before the promotion start date (this is done for F&R) and we activate the promotion 5 days before the start date (this is done for our POS system)
    What could be the cause of the VKA0 condition not being created?
    Rgds

    Hi Sush,
    In that table where the path you indicate takes you, you just need to insert the following entries:
    BIDDER
    COLLAB
    EVALUA
    EXTERN
    INTERN
    Hope this will help you.
    By the way, where are you implementing PPS?
    Best regards,
    André Sousa

  • Sapdata3 has been not created after Sap Neatweaver 7.3

    Hi Gurus,
    I have done the installation for SAP Netweaver 7.3 Java stack with distributed option with oracle database .
    However file system created is sapdata1,sapdata2 , and sapdata4 has been created but sapdata3 is not created .
    can any one susggest.
    Regards,
    Jeetendra

    Hi Jeetendra,
    Check whether you system is up and running ?
    If yes, then sapdata3 is a folder created under /oracle/SID or /oracle based on your file system structure.
    As right mentioned SAP installer will not create any file system. If file system /oracle/SID/sapdata3 is not available, SAP installer will create a folder sapdata3 under /oracle/SID and respective data files will be created under the same.
    Hope this helps.
    Regards,
    Deepak Kori

Maybe you are looking for

  • Clients in Flex-connect SSID (with Anchor Controller) not able to connect with BYOD

    I have a WLC and having some SSIDs for Flex-connect mode (Mobility-group). Users trying to connect the wireless network using BYOD device but while they are trying to connect , it spins and spins . I checked controller , client is connected and got I

  • XML to ABAP - where the ABAP mapping?

    Dear experts, I have to do an ABAP mapping which I have never done before. I found blog: /people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach which shows the ABAP code. I us

  • Where is the implement of fork() function?

    I have great interest in the implement of fork() function, but after downloading the source file, I can't find the exact file. Can anybody tell me which file should I look?

  • How to plug macbook to TV- Comment brancher Macbook sur TV

    I have a macbook pro late 2011 I have a Kanex HDMI cable with audio support I want to watch internet shows on my tv Sharp Aquos... I plugged the wire on my computer and the HDMI port but nothing work... Jai un macbook late 2011 et j'ai acheté au appl

  • SQl query are running slow in comparison to oracle 8i

    Hi everybody, I have two systems one is Oracle 9i on Windows 2000 and one is Oracle 8i running on Windows 2000. The database structure is the same. When I run the following qry in Oracle 9i SELECT COUNT (a.aint_ac_no) AS total_ac_no, adet_int_rate, S