PR/PO Release  above certain limit

Hi guys,
where can we make settings so that the user can release a PR ,PO with no limit.Currently a user cannot relaese PR/PO above limit of 2000.Please guide
Regards.

hi sudha,
value characteristic should be assigned as
1. >0 - in CL24N.
please check and confirm.
hope this clears your issue
balajia

Similar Messages

  • Lower Rate TDS upto certain limit

    I have one vendor who is applicable lower rate of TDS upto certain limit, but after certain limit system have to charge normal rate of TDS, is it possible to track and post such type of transaction in SAP?

    HI,
    It is possible with help of below config.
    Accumultion + Formula's
    please create separate tax type and tax code for this particular vendor.
    tax type
    accumulation , per year start month 4
    tax code
    check box " form w/tax"
    Define the formula's for withholding tax.
    upto
    50000                     5%
    9999999999999   10 %
    above is very specific to one vendor.
    Regards
    Madhu M

  • To restrict overdelivery tolerance up to a certain limit while creating PO

    Dear friends,
    How to restrict overdelivery tolerance up to a certain limit (e.g. 5 or 10%) in delivery tab while PO creation?
    Any idea?
    Regds
    Amitava

    Hi
    Hope you aware the delivery tolerance is coming from Purchasing value key you maintained in the Material master.
    So you can restrict the over delivery percentage at purchasing value key itself.
    Or please try the screen lay out to only display the field after maintaining the correct % in PVK.
    Or Try some user exit with the help of ABAPer.
    Hope it helps.
    Thanks/Karthik

  • Want pull the PO's for those PO value exceeds certain limit.

    HI SAP Gurus,
    I Want pull the PO's report for those PO value exceeds certain limit ( Example I want to pull the PO's which value is more that 5 million USD for period of 1 year)
    Thanks and Regards,
    SHARAN.

    hi
    Try the table EKBE with fields WRBTR( invoice document amount) , DMBTR (Line item amount in the local currency for GRn Quantity) EBELN- (Purchase order). This will give you the details. Do check a test case with tolerance at Invoice level and post additional amount for Invoice and check the Table field updations.
    Also ,
    Try it in Tcode SE16
    table Name EKBE.
    Or,
    May be use can use standard report ME2N, with selection parameter: GUTSCHRIFT (Invoice exist), it will give you all the list of PO with invoice. Here you can check the conditions as you need.
    I hope it helps.
    Best Regards,
    Rahul.

  • Screen Goes off above certain angle

    The screen of my MacBook 2GHz Intel Core 2 Duo goes black when I raise it above about 70º . It re-illuminates when lowered and finally goes off as normal as it nears the closed position. It is difficult to use at anything below 90º. The backlight is being switched off it appears but data is still being sent to the screen as it can be seen vaguely. Does anyone know what mechanism is used to switch the screen off and if so where it is situated and whether it is easy to fix? I do not think it is a software fault...

    I'd be surprised if the magnetic latch was responsible for switching off the backlight otherwise would it not be possible to switch the screen off by putting something magnetic close to it which would be annoying? The magnets are located at the top corners of the screen and the corners of the keyboard hand rest areas. I thought it might be a loose connection to the inverter board but wouldn't expect it to remake contact once broken.

  • Custom Icons Disappear in Cover Flow Above Certain Size

    I've been trying to create custom icons for certain folders and I've been having no luck when viewing them in cover flow.
    I've downloaded a PNG file, 512x512 pixels. Open it in Preview, copy to the clipboard, do a 'get info' on the folder I wish to change the icon of, click the little icon, hit paste, and it appears correctly in the preview and in the finder Icons view, as well as on my desktop or whatever. However, if I turn on cover flow and drag the size of cover flow to larger than a certain point, the custom image disappears and all I get is a blank spot. It's as if the 256 pixel icon is being created but the 512 pixel image is being left blank.
    I do not know if this happened in 10.5.1, as I hadn't tried until after installing the 10.5.2 combo update.
    In the following picture, you can see 1: bottom right, a preview of the png file itself as it appears, correctly, in cover flow, 2: top right, the icon working correctly on the desktop and in the get info window, and 3: left: the cover flow view of the computer showing a bit gaping void where the custom icon should reside.
    !http://www.ece.ualberta.ca/~tomlinso/argh.jpg!
    Any ideas? Thanks in advance!

    This does NOT happen if I use an existing, working icon (say, put the Applications folder's icon onto my hard drive.) It seems to be an issue with custom icons only, not just changing the icon for something.

  • Setting first visible row in Web Dynpro ALV in Releases above 7.0

    Hello Everybody,
    I have an ALV in which a particular row should be set to lead selection and also set as the first visible row in this ALV for the first display. The index for this row is determined at runtime.
    I used the method SET_FIRST_VISIBLE_ROW of the interface IF_SALV_WD_TABLE_SETTINGS and it worked fine in a system of Release 7.0.
    However, after the system has been upgraded to 7.02, this is not working. The row is lead selected but it is not set as the first visible row and as a result I need to scroll down and look for the row that is lead selected.
    Does anybody have suggestions?
    Thanks!
    Vidya

    Hello Srilatha,
    Thanks a lot for your suggestion! I am calling method SET_FIRST_VISIBLE_ROW in the wddoinit method of the view.
    I tried checking in the debugging mode by inserting a call to GET_FIRST_VISIBLE_ROW in both the wddoinit method as well as wddomodifyview method.
    The value of the first visible row is correct in both these methods but when the screen is rendered, the first row of the ALV continues to be the first visible row.
      CALL METHOD wd_this->lref_nd_node_rename->set_lead_selection_index
        EXPORTING
          index = lv_leadselection.
      wd_this->lref_table_settings ?= wd_this->lref_value.
      CALL METHOD wd_this->lref_table_settings->set_first_visible_row
        EXPORTING
          value = lv_leadselection.
      " Set vertical scrollbar height to 15 rows
      CALL METHOD wd_this->lref_table_settings->set_visible_row_count
        EXPORTING
          value = '15'.
    Here lv_leadselection contains the index of the row that needs to be lead selected (in this case it is 3)
    lref_value is of type CL_SALV_WD_CONFIG_TABLE
    lref_table_settings is of type IF_SALV_WD_TABLE_SETTINGS
    lref_value and lref_table_setings are view attributes.
    Thanks and best regards,
    Vidya

  • LOV not return values more than certain limit

    Hi Guys,
    I have created 2 search fields (State, Area) in report page. Both of them are LOVs based. User select first field value, next field's LOV return values based on the first field( AJAX call). First field is states like 'VIC', 'NSW', 'SA' etc..., next field is 'Area'. when I select state other than 'NSW' in state field then next field is populated successfully. But when I select state as 'NSW' then next field is blank. 'NSW' state has records more than 100 in the table(LOV based on), but all other states have even less than 10 records. when I remove (more than 50) records of 'NSW' in the table then It works.
    Can anybody know if there is a limit of LOV that can be supported?

    Thanks Varad for reply.
    As you suggested to change gReturn = get.get('XML') to gReturn = get.get() for text values, But it is not simple as you said.
    I have found the problem. Actualy, there are some special characters in database column that suppose to return in LOV. But LOV is returned as xml object that may not support special characters (&,$, % etc...). I have put the 'replace' function in query. My query is like
    select replace(name,'&','and') d, id r
    from table1
    where val1 = :P2_val
    order by 1
    This query works in SQL WORKSHOP but not in AJAX. Any Idea? If I have to replace get.get('XML') to get.get() then what other steps I have to perform?

  • Ipod mini won't write past certain limit

    I woke up this morning to the sad folder face on my iPod mini. After a reset, it was still a sad mini, so I did what I thought necessary: I restored it with updater software. Now, it connects ok, and what music I can put on it plays fine. The problem is that I can't put more than about 1.15 GB of music onto the mini. After that, iTunes and the mini both freeze, and my only recourse is to unplug it, ignoring the warning about not doing that, and resetting the mini.
    I have tried to so a secure erase of the free space using disk utility, and it freezes at about 15% of the progress bar, right where I'd expect based on my writing issues.
    Anybody encountered this and solved it? My iPod is no longer under AppleCare, so regardless of whether or not it's my fault (I'm not ready to admit any blame just yet), I can't get it fixed/replaced for free.

    I have been attempting to load music onto my ipod mini with iTunes and am having the same type of problem. On a previous day, I tried for hours and got frustrated and quit. Tonight I have been reading about this type of problem on message boards and have tried twice to load the songs. The first time, it froze on song #79 when it had loaded 804.7 MB. The second time, it froze on song #42 when it had loaded 636.2 MB.
    I don't understand why it had to reload the exact same songs and froze earlier the second time than it did the first time.
    The previous night when I was attempting to load songs, it froze several times on the same album, but not the same song. SO, I took that album out, thinking that the songs might be corrupted.
    Another thought that I had is that there could be an incompatibility between versions of software in the iPod and iTunes?????
    PowerPC G3   Mac OS X (10.4.5)   iPod mini 1.4.1
    PowerPC G3   Mac OS X (10.4.5)   ipod mini 1.4.1

  • PO message issue above certain PO value

    Hi,
    I am thinking about a value-related PO message issue. Is this possible by default?
    One example:
    POs are to be issued via fax, no problem. But if PO value exceeds e.g. 100.000u20AC, the PO should also be issued via e-mail or printout to another (internal) party, just as a notice that this high-value PO has been sent out.
    Is there any possibility to implement this w/o big efforts?

    by standard setting there is no possibility.
    It is possibe with help of ABAP develoment.
    No Big effort required

  • My Site UI breaks beyond a certain limit. However this issue doesn't exist on other browsers.

    On Our site I have huge product list page which exceeds 200 products. Each can hold 120px height. When the listing exceeds the 190th product, the HTML part stops redering(only plain text is renderd). However this works fine on other browsers.
    I am using latest version of firefox - 28.0.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Disabling comboboxes after a certain limit has been met

    I have 4 comboboxes called:
    cboOption1 
    cboOption2 
    cboOption3 
    cboOption4
    Each of them can have one of 2 values, either 10 or 20 points, which the user selects from a drop down. However, the user can only select a maximum of 40 points across all drop downs, after which the remaining dropdowns that follow will be disabled.
    E.g. 1
    cboOption1 = 20
    cboOption2 = 20
    Then
    cboOption3.Enabled = False
    cboOption3.Enabled = False 
    E.g. 2
    cboOption1 = 10
    cboOption2 = 20
    cboOption3 = 10
    Then
    cboOption4.Enabled = False 
    E.g. 3
    cboOption1 = 10
    cboOption2 = 10
    cboOption3 = 10
    cboOption3 = 40
    Then
    None disabled.
    My problem
    The difficulty I'm experiencing at the moment is figuring out how to flick the comboboxes on/off in response to user input. This is my code so far, it doesn't seem to be working too well, any idea how I can improve it.
    Code so far
    Sub checkTotal(var1, var2, var3, var4, total)
    so1 = Int(var1)
    so2 = Int(var2)
    so3 = Int(var3)
    so4 = Int(var4)
    total = Nz(so1, 0) + Nz(so2, 0) + Nz(so3, 0) + Nz(so4, 0)
    If total > 40 And (so1 = "20" Or so2 = "20" Or so3 = "20" Or so4 = "20") Then
    cboOption3.Value = ""
    cboOption3.Enabled = False
    cboOption4.Value = ""
    cboOption4.Enabled = False
    End If
    MsgBox total
    End Sub
    Private Sub cboOption1_Change()
    Call checkTotal(cboOption1.Column(1), cboOption2.Column(1), cboOption3.Column(1), cboOption4.Column(1), so1RunningTotal)
    End Sub
    Private Sub cboOption2_Change()
    Call checkTotal(cboOption1.Column(1), cboOption2.Column(1), cboOption3.Column(1), cboOption4.Column(1), so1RunningTotal)
    End Sub
    Private Sub cboOption3_Change()
    Call checkTotal(cboOption1.Column(1), cboOption2.Column(1), cboOption3.Column(1), cboOption4.Column(1), so1RunningTotal)
    End Sub
    Private Sub cboOption4_Change()
    Call checkTotal(cboOption1.Column(1), cboOption2.Column(1), cboOption3.Column(1), cboOption4.Column(1), so1RunningTotal)
    End Sub

    Hi Methuselah,
    You are using VB6, it is antique, that while it needs a license to use and to deploy programs from.
    There is currently at Microsoft a complete community 2013 version of the latest version of VB (VB12 also named VB2013), why not try that one.
    You can use it free and deploy the programs you've made with it.
    http://www.visualstudio.com/en-us/downloads/download-visual-studio-vs.aspx
    It is bellow the 90 day versions and then the community one.
    Success
    Cor

  • Rate limit a certain pvc on an ATM interface on DSLAM

    Dear Sir
    I want to rate limit a certain pvc on an ATM interface on DSLAM 6260, Taking into consideration that i have tried all the kind of configuration using the rx-cttr and tx-cttr but all was useless.
    Could you please guide me how to do that, especially if i have a multiple pvcs on the same ATM interfaces and i need each not to raise above certain limit?
    Thanks in advance

    Dear Sir
    First thank you for your reply and concern.
    Here is the version 12.2(12)DA8 as i told you it is a Cisco DSLAM 6260 with NI-2, and as i got from the TAC that it is the latest (as far as i know).
    Thanks a lot

  • Can we add new Payment means in SAP Business One Payments

    Dear Experts,
    Can we new Payment means in SAP Business One Payments?
    Currently, I am having 4 Payment means as Cash, Cheque, Bank Transfer and Credit Card.
    I need one more Payment means as Coupons.
    These are the Discount coupons which will be issued to our regular customers on Purchase of amount above certain limit.
    Thanks & Regards,
    Amrut Sabnis

    Hi Amrut,
    you can't add a payment means, but you can book the new payment means as an additional creditcard name for example "coupons"
    Kind regards
    Ad

  • Control with Limits

    Hi All
    We have a requirement around trx control and found earlier esponse on trasaction control very helpful .
    Just need help on one aspect .
    Our business need is to stop the user from entering effort or amount above certain limit , for e.g Total accepted billable hours is 40 per week , total billable expense (in exp reports) is $1000 and these figures change from project to project , so we want to capture this on project header and plan to use trx control extension to raise exception if amount is more than set amount . Please correct us that extension would support this i.e user get exception on time& expense if voilated just like normal trx control exception .
    Thanks in advance
    veda

    Hi
    Transaction control extension is called for any transaction source and any type of expenditure, when ever transaction control is invoked.
    When user is entering time card on OTL or other EBS time entry product the system calls transaction control. this is also the case for iExpense. Using those products the user will get transaction control exception as required. However, if you are using a third party system, the exception will be seen only when expenditures are imported into Projects.
    Dina

Maybe you are looking for