PR to PO conversion

Dear SAP Masters,
i am facing problem in Planning , multiple PR are getting genrated on the same date though requirement datre is different,
when i am going to covert those  PR in to PO system via me47 system is creating diffferent line items for same delivery date.
plz guide how to combime different PR into single line item in a po if he delivery date is same for the required material.
Rgds
SAP Team

Hi,
As per my best knowledge you cannot convert several PRs into one PO item automatically in standard system.
You should maintain proper master data to get the desired result.
Please maintain the correct lot sizing procedure in the material master of your material (MRP1 view; I think periodically would be OK for you - but you know). Please check SAP online help for details:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/fe/819b9f643b11d3b4e40004ac160649/frameset.htm
Please also take care of collecive requirement setting of your material, please also check SAP online help:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ea/e9b4ae4c7211d189520000e829fbbd/frameset.htm
Using the proper master data settings you are likely to get one PR and the conversion will result in one PO.
Regards,
Csaba
Edited by: Csaba Szommer on Jan 25, 2009 5:57 PM

Similar Messages

  • Conversion of Characteristic Values to SIDs is taking long time

    Hi Experts,
        Cube load is taking more than 7 hrs to complete for 6 million records. Max time is at Conversion of Characteristic Values to SIDs. Cube consists of 500 fields. Load is from DSO to Cube. DSO has 10 fileds with no SID flag check for activation. Remaining fields in the CUBE are pouplated looking in to other DSO's. Start and End routines are executing very fast. How to fasten Conversion of Characteristic Values to SIDs step.  I need to load 15 million records daily as part of delta. any suggestions.
    Thanks
    Sunil

    Hi Sunil,
    Go through the below link, it will be useful
    http://aq33.com/business-warehouse/Articles-05269.html
    Regards,
    Marasa.

  • 11i to r12 Conversion - help needed

    Hi
    My client is doing re-implementation of r12 and migrating from 11i to r12. I need help particularly on conversions side. The client is a SaaS company. they are considering to bring open and history transactions and applied/unapplied receipts to r12 AR.
    - how to migrate revenue scheduled open/closed invoices from 11i to r12 since rev schedules for a SaaS company is expected to be long terms. and how to make sure that rev schedules are correct upon migration to r12??
    - for partially paid invoices how to make sure that the same partially paid amount reflects in r12 upon conversion? can a negative line amount equalling to paid amount be a possible solution??
    - upon migration do the closed invoices have to be converted as open and receipts re-applied after migration in r12 or they can be brought in as-is with status closed?
    - if customer paid for an invoice using a credit card in 11i and upon migration it came to notice that the credit card is no longer used by the customer so how to re-apply the same receipt in r12 which was applied in 11i using that credit card. do we have to enable it in r12 just for closing the invoice? what could be possibilities?
    please anyone if can answer would be very helpful
    Thanks
    -MS

    It depends on the dpi. Usually 72dpi = 72 pixels per inch.
    1000/72 = 13,88888 inch
    1 inch = 25,4 mm
    13,88888 * 25,4 = 352,7777 mm
    You do the arithmatic with a calculator.
    To do the same with pictures, you can do it in any image editor. Even Preview.app :
    !http://www.wyodor.net/_Discussions/PreviewResize.png!

  • IMessage beta loose all saved conversations when I open and close a window.

    iMessage beta looses all saved conversations when I open and close a window.
    Just reporting this bug... Could not find anyother place to do it.
    Jonathan

    I thought it was doing that also. But I found that if I start a new chat with someone I was messaging before, then the old messages re-appear in the messages window.

  • Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

    Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

    Did you find an answer to your question?
    Would it also apply to Mountain Lion's Messages?
    Thanks

  • I need to delete myself from a Group Conversation.

    My idiot friends added me to a group conversation and i cannot leave it. Each time i ask them to start a new conversation and not include me they refuse. My phone has been ringing non stop for 3 days now and i need to find a way to get out of this conversation so that i can go to class, do my homework and sleep at night!!! I can turn my phone onto Airplane mode but when it is in this mode I cant receive the important phone calls and text messages that i need to answer.
    Somebody please help me.
    If there is no way to leave this conversation somebody please tell me where i can find a virus that will shut down their phones.
    Thanks
    WN

    See this Video on Freeing Up Disc Space
    http://macmost.com/what-to-do-when-your-hard-drive-is-full.html

  • In Thunderbird while trying to move conversation results to an archive folder; if some of the results are already in the folder it will not move any.

    Hi. I often use the conversation search option when archiving my emails from inbox. I find this a very useful method of finding trails where I and multiple people have responded to each other. However If I have already moved one or more of these emails into the archive folder and select all to move, Thunderbird will not move any. I then need to individually select those that need to be moved.
    Although not a major issue I use this regularly and often come across the problem. a recent fix which allows location tab to remain on in search helps but does not resolve this issue. A slightly annoying problem and I was wondering if any one else has this issue. Also is anyone looking into a solution?

    FCPx answer: At least the answer that worked for me...
    I had the same problem, as I believe many others had.
    In my case the problem was with one of OSX Mavericks' new features: APP NAP.
    It looks like this is ON by DEFAULT for ALL Applications and that FCPx, or Compressor for that matter, will not work if this is enabled on them.
    I just disabled App Napp on FCPx and now it works, again, like a charm.
    This is how you disable App Nap: http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
    I hope this helps,
    Mariano

  • Import conversion data table from SAP R/3 into value mapping table in XI

    Hi:
        Somebody knows how to import a table with conversion data that are in SAP R/3 and to take it to a value mapping table in XI?
        The purpose is to use a mapping table that can change in the future. Must I use a ABAP programming that retrieve data and build the value mapping table?
        If so, how I specify in the ABAP programming the group id, the scheme, the agency and the corresponding value?
        Please, help me.
        Regards!!!

    Hi David,
    please refer to this section in the help: http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
    There is an interface for mass replication of mapping data. The steps you need to carry out to use this are:
    +Activities
    To implement a value-mapping replication scenario, proceed as follows:
           1.      Register the Java (inbound) proxies.
    To do so, call the following URLs in the following order in your Internet browser:
    ¡        http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication (for the asynchronous replication scenario)
    ¡ http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous (for the synchronous replication scenario)
    You only need to perform this step once (for each installation).
           2.      Application programming
    The ABAP program must perform the following tasks:
    ¡        Read the value mapping data from the external table
    ¡        Call the outbound proxy used to transfer the data to a message, which is then sent to the Integration Server
           3.      Configuration of the replication scenario in the Integration Directory
    This involves creating all the configuration objects you need to execute the scenario successfully. One special aspect of the value-mapping replication scenario is that the receiver is predefined (it must be on the Integration Server). The sender, however, is not predefined in the replication scenario and can be defined to meet your individual requirements.
    For example, you can use the shipped ABAP proxies.
    In the case of the receiver communication channel, choose the adapter type XI. Ensure that you configure a channel for the Java proxy receiver in this case.
    Enter the path prefix /MessagingSystem/receive/JPR/XI for this purpose.
    +
    Regards
    Christine

  • In Pages 5, Maverick, How do I stop automatic conversation of URLs to hyperlinks and seeing them underlined

    There used to be a preference setting in Pages.  Now it seems gone in Pages 5.   So how do I stop automatic conversation of URLs to hyperlinks and seeing them underlined in text.  Sometimes I want it, but not always.

    The preference setting to turn off links is gone. When you enter content that triggers link detection, a link character style gets applied. Right-click on the link, choose Edit Link from the menu, and then Remove.
    To prevent Pages from automatically detecting links, visit Edit > Substitutions > and deselect Smart Links.

  • Content conversion in sender file adapter problem

    Hello,
    I receive a flat file with the following structure:
    HEADER;...fields;
    ITEM;...fields;
    ITEM;...fields...;
    HEADER;...fields;
    ITEM;...fields...;
    ...etc.
    and I am converting it to xml with the same structure. The Problem by the conversion is that the result looks something like this:
    HEADER;...fields;
    ITEM;...fields;
    ITEM;...fields;
    ITEM;...fields;
    HEADER;...fields
    HEADER;...fields.
    So, all the ITEM recordsets are ordered to one HEADER structure and the other HEADER structures have no ITEMs.
    Do you have a suggestion how I can get this right?
    Thanks!!
    Best Regards,
    Mircea

    Hi,
    Can you provide with the details of FCC parameters you have used ??
    The problem might be there in the occurance..
    Regards,
    Chandra

  • File Content Conversion in Sender File Adapter

    Hi,
    I am implementing a scenario, where I need to do Content conversion in My file Adapter.My input file is as follows
    BGN00S-A200711281003ET4
    REF38381012
    DTP007D820071128
    N1P5P5MicrosoftFI58-0612397
    INSY18030XNAN
    REFZZZZ666666666
    DTP336D819970331
    NM1ILIL1AdamsMarkE34666666666
    PERIPIPHP770555-5555
    N31470 Georgia Club Drive
    N4StathamGA30666
    DMGD819571022MM7
    HD030HLTAE1D
    My data type is as below.
    <header>
         <BGN>
              <A></A>
              <B></B>
              <C></C>
              <D></D>
         </BGN>
         <REF>
              <A1></A1>
              <B1></B1>
              <C1></C1>
              <D1></D1>
         </REF>
         <DTP>
              <A2></A2>
              <B2></B2>
              <C2></C2>
              <D2></D2>
         </DTP>
    </header>
    <Content>
         <N1>
              <A></A>
              <B></B>
              <C></C>
              <D></D>
         </N1>
         <REFAR>
              <A1></A1>
              <B1></B1>
              <C1></C1>
              <D1></D1>
         </REFAR>
         <DMP>
              <A2></A2>
              <B2></B2>
              <C2></C2>
              <D2></D2>
         </DMP>
    </Content>
    My issue is, How do I set my parameter in Sender Comm channel for content conversion especially at record structure.
    I have provided the value as Header,1,Content,*
    But its not working.
    If I do provide like
    BGN_REC,,REF_REC,,DTP_REC,,N1_REC,,INS_REC,,NM1_REC,,PER_REC,,N3_REC,,N4_REC,,DMG_REC,,HD_REC,* then ,I am not getting above XML format. Please suggest or How can I modify my Data type which competes to configure in Channel
    Thanks
    Manmadha

    Hi All,
    I am sorry for the Jumbled Content. I dont know what happened.
    I should get the XML output as below.
    header>
         <BGN>
              <A></A>
              <B></B>
              <C></C>
              <D></D>
         </BGN>
         <REF>
              <A1></A1>
              <B1></B1>
              <C1></C1>
              <D1></D1>
         </REF>
         <DTP>
              <A2></A2>
              <B2></B2>
              <C2></C2>
              <D2></D2>
         </DTP>
    </header>
    <Content>
         <N1>
              <A></A>
              <B></B>
              <C></C>
              <D></D>
         </N1>
         <REFAR>
              <A1></A1>
              <B1></B1>
              <C1></C1>
              <D1></D1>
         </REFAR>
         <DMP>
              <A2></A2>
              <B2></B2>
              <C2></C2>
              <D2></D2>
         </DMP>
    </Content>

  • J2SE adapter PI 7.1 issue with XML to flat conversion and namespace length

    Dear reader,
    We are facing an issue with J2SE Adapter PI7.1 for a number of flows.
    The flow requirements:
    [1] Namespace length for interfaces is up to 100 characters
    [2] The XML message must be converted to Flat on the adapter channel
    Our PI system is at patch level 7 and we implement J2SE adapter on patch level 7 as well.
    We found that the J2SE adapter on patch level 7 does not support long namespaces [1] (as it should since this is an PI 7.1 j2SE adapter) but no issues where found with the XML to flat conversion [2].
    Experimenting with J2SE adapter on patch level 6 we found the long namespaces [1] are supported however an issue is found with the XML to flat conversion [2] as stated in SAP note 1335527.
    An SAP Customer Message is raised on this issue however your input is highly appricated!
    With Kind Regards,
    Harald Kastelijn
    Edited by: Harald Kastelijn on Mar 6, 2010 9:17 AM
    Edited by: Harald Kastelijn on Mar 6, 2010 9:19 AM

    We found that the J2SE adapter on patch level 7 does not support long namespaces [1] (as it should since this is an PI 7.1
    j2SE adapter) but no issues where found with the XML to flat conversion [2]
    I think the restriction of namespace length still remains in design time (IR).....the same however has been extended in configuration and runtime...this SAP note has some information: https://service.sap.com/sap/support/notes/870809

  • In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

    In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

    Hi DirTech,
    Are both of these dates in the same Excel file? If they're in different files, are you choosing the same language for OCR (optical character recognition)?
    If they are in the same PDF file, how was that PDF file created? Was it created from a third-party application (rather than an Adobe application)? If it was created by a third-party application, it could be that it wasn't written to spec, and that's why you're seeing some oddities in the PDF > Excel conversion.  (See Will Adobe ExportPDF convert both text and form... | Adobe Community.)
    Best,
    Sara

  • Error in IMPORT statement: Change of length on conversion.

    Hi this is an error i had when creating a source system for a client.
    Runtime Errors CONNE_IMPORT_CONVERSION_ERROR
    Occurred on 21.02.2005 at 14:08:20
    The error probably occurred when installing the
    R/3 system.
    When importing an object, conversion would result in a length change.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "CONNE_IMPORT_CONVERSION_ERROR" C
    "CL_W3_API_TEMPLATE============CP " or "CL_W3_API_TEMPLATE============CM007 "
    "IF_W3_API_TEMPLATE~LOAD"
    Can anyone please help me .
    Thanks in Advance
    SHASH

    Hi All,
    Above mentioned note will help but this will help you....
    I got the solution for this issue for my kind of problem.
    In program RPU600BT_CONV_SINGLE_CL we commented the following
    START-OF-SELECTION.
    IF 1 = 0. MESSAGE e567(3g). ENDIF. "#EC *
    PERFORM append_message USING 1
    space
    '567' "report not necessary
    space
    space
    space
    space
    'P'.
    STOP. "check note 1314769 whether conversion is necessary
    After this execute the same program and we will get the old results get converted.
    And one more is we should be careful in checking SAPU & SPAD transaction codes. There shouldn't be any partially implemented notes.
    Think will help at least one.
    Regards
    Aditya Surapaneni

  • Conversion of Mysql query in oracle acceptable query format

    Hi
    I have successfully converted my MySql database in oracle. Now the problem is how to execute already written hundreds of Mysql query on the oracle. There are many syntax variation in Mysql query format which is not acceptable for oracle.
    For Example
    Select case_id as 'this is alias' from cases
    The above query can run on Mysql database but have problem while executing Oracle, because single quotes should be replaced with double quotes before executing it on oracle. There are also many other syntax conflicts.
    I have tried to resolve the problem through SwisSQLAPI but problem still exist as SwisSQLAPI is not dealing with all syntax conflict. In my case (select if (expresion, true,false)) must be replace with decode (expression, value,true,false) function of oracle and this conversion is not supported by SwisSQLAPI.
    Please help me in resolving this problem
    Thanks

    The problem with trying to port from one language (mysql SQL) to another (oracle SQL) is that there's generally no hard rules for a computer to follow, that it will get it 100% correct.
    Look at babelfish when you translate a foreign language to English. The end result is readable (usually), but it's rarely completely correct.
    The problem is when you feed something into Oracle SQL, it needs to be 100% correct.
    All you can really do here is rewrite these queries. It shouldn't actually take as long as you think, because 50% of queries will generally need very minor changes you can do in a minute, and 25% won't need any changes at all.

  • FIle Content Conversion Problem in IDOC-XI-File Scenario

    Dear All,
    I am doing IDOC-XI-FILE scenario.
    I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like <b>%store_code%_%current_date%_sitemaster.xml</b> , I have completed the dynamic generation successfully .
    Now there is slight change in the requirement ,<b>we have to suppress the current_date node of the xml content</b> . i have tried to suppress the current_date using these <b>DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut</b> , But I am unable to suppress it Can some body provide me the details on this .
    The output xml version generated by Reciever file adapter is as below :
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
    - <SITE_DATA>
    <STORE_CODE>N002</STORE_CODE>
    <TITLE_MEDI>Company</TITLE_MEDI>
    <STORE_NAME>Mount Road</STORE_NAME>
    <STREET>Chennai</STREET>
    <COUNTRY>IN</COUNTRY>
    <SALES_TAX_NO>12345678910</SALES_TAX_NO>
    </SITE_DATA>
    </ns0:MT_SITE_MASTER>
    Plz provide me the code I have to write in the file content conversion .
    Thanks in advance
    Regards
    Prabhat

    If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
    My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier.  Then use the Suppress Logic for the Current Date.
    So it will look like this-
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
    - <SITE_DATA>
    <STORE_CODE>N002</STORE_CODE>
    <TITLE_MEDI>Company</TITLE_MEDI>
    <STORE_NAME>Mount Road</STORE_NAME>
    <STREET>Chennai</STREET>
    <COUNTRY>IN</COUNTRY>
    <SALES_TAX_NO>12345678910</SALES_TAX_NO>
    </SITE_DATA>
    <CURR_DATE>
       <CURRENT_DATE>20051105</CURRENT_DATE>
    </CURR_DATE>
    </ns0:MT_SITE_MASTER>
    So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
    CURR_DATE.fieldFixedLengths - 0
    CURR_DATE.fixedLengthTooShortHanling - Cut
    And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
    Hope this solves ur problem.
    Regards,
    Moorthy

Maybe you are looking for