Prblem in Refirbishment cycle while creating PO

Dear experts,
I'm working on refurbishment processing.
I have done all the steps as below:
I have a material for equipment for which I have 3 valuation types:
    C1 - New items
    C2 - Repaired Items
    C3 - Damaged Items.
1. Equipment creation with serial number allocating the valuation type C1 installed at a F/L
2. I have 2 no.s of the same in stock with the valuation type C1.
Now I got a problem with equipment which is installed and needs to send it to the vendor for repair.
I have changed the valuation type to C3 of the equipment in serial number data, and dismantled using t code IE4N with movement type 202.
After that I have issued one material (equipment) from stock to the same cost center and then went to change mode of the equipment (IE02) in structure tab I have mentioned the F/L.
Now I have created a Refurbishment order for the damaged equipment, mentioning from valuation C3 to valuation C2 in the order.
I have mentioned the Service number, qyt and price in the External screen of the Operations tab. Released the order. I got PR.
Now creating the PO for the same PR, I am getting an error message as below:
Inspection plan is not created for the material
Message no. ME303
Actually there is no material exists in the PR. and I have not created QM view for that material.
But I am not able to understand why this error message is coming?
Can any one please help me in solving this error message?
I am following the steps correctly? If not please tell me where I'm doing wrong?
Thanks in Advance,
Regards,
Praveen.

Hi
Can u tel me, why u used IE4N...
[Refurbhishment Order|http://help.sap.com/saphelp_46c/helpdata/en/fe/67ec5c9d6f11d189b60000e829fbbd/frameset.htm]
Check out this help doc... do as per the steps...
Check the type of equipment u have used for refurbhisment.. is it a Inspection eq.
I am not sure abt the issue... just giving u some ideas..
- Pithan

Similar Messages

No popup to select active implementation cycle, while creating change Request

Hi,
I have two active Implementation projects.
While creating change requests, it is not giving any popup to select the specific cycle.
It automatically assigns to newly activated Cycle.
Please advise.
Thanks & Best Regards,
Kiran Sathyan

Hi,
if you would mention about sap solution manager version, this critical landscape transport and design before you state the problem, this would saved much time.
Now I dont think so Popup functions applicable for implentation cycles.
check out http://help.sap.com/saphelp_sm40/helpdata/en/1a/c39742042fc86ae10000000a155106/frameset.htm
and regarding closing the project cycle check this out below informations,
933705 - Closing inconsistent project cycles
Change Request Management scenario: Usual questions and known errors
question 10.
Make sure you closed open tasks, chk in tcode scma
Thanks
Jansi

While creating a PO in ME21N the return check box is automatically ticked.

Hi SAP Gurus,
I am facing a problem while creating a PO.
Every time I am trying to create a PO in ME21N, the return check box at the Item level of the PO is automatically getting ticked.
The check box can't be unticked even in change mode of the PO.
So all of the PO's with different document types are getting created with the Return check box ticked.
Can you help me to uncheck the Return tab in the Item level.
Please advice if any configuration is required or the code has to be modified.
Thanks in adavance.
Regards
Subhasis

Hi,
Go to the Table T007A, where you find the tax codes.
Input & out put taxes are the tax types.
In FTXP T.code give the tax code and click on the
Input tax codes are used for purchase cycle and out put taxes are for sales cycle. I Hope you have given the sales related tax code. Thats why system is giving the error message.
In T007 Table give the proper input and get the details.
Regards,

Error while creating absence Quotas - Error no 83

Hi Friends,
Would appreciate help on this .
While creating time quota-
am geting this error :
<b>Error while creating absence Quotas.
Error no - 83</b>
Reagards,
Srikanta

Hi
Don't know if your question has been resolved, but check the leave cycle date types on IT0041 and IT0001 and IT0007 should all be aligned.
Hope this helps.

Error while creating configurable task list

Dear Expert,
I am trying to create configurable task list for equipments and I want to use this task list for preventive maintenance cycle. In following steps I will tell you what i did in the process.
Step1:- Characteristic is created and different values are assigned to this.
Step2:- Class with class type 300 is created, characteristic is assigned to this class
Step3:- Equipments are created and class created in above steps is assigned to them and character values are set for them
Step4:- General maintenance task list created
Step5:- Configuration profile for task list with same class is created
now while creating the object assignment in the task list operation, in the dependency basic data I am getting error ' No source code entered'. Please guide me what data do I need to enter in this basic data and where I am doing wrong.
I try to follow the previous discussion regarding the same topic, but unable to create this object dependency assignment.
Thanx in advance, for your help.
Regards,
Parag

Hi Parag,
See this document.Configurable Tasklist
I hope you will be able to connect and correct your process accordingly.
Step3 here (CU01) is related to your issue.
You are expected to give a code shown like that in the Editor above Assignments in the Tasklist Extras menu (Takes to CU01)
Jogeswara Rao K

Error while creating new scheduler

Hi, While creating a scheduler using KMScheduler, I get the below error
import java.util.Properties;
import com.sapportals.wcm.WcmException;
import com.sapportals.wcm.service.*;
import com.sapportals.wcm.service.scheduler.*;
public class extract implements ISchedulerTask
My system is unable to find the jar files and it shows error in ISchedulerTask. But I have already imported the below seen jar files.
Kind     Status     Priority     Description     Resource     In Folder     Location
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.mime_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.notificator_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.oth_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.pipeline_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.relation_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.rtr_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.urimapper_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.urlgenerator_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.mi_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.repository.service.serviceacl_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.runtime_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.util_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.sf.framework_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.sf.service.applog_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.sf.service.cache_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.sf.service.landscape_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.sf.service.scheduler_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.sf.service.taskqueue_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.util.kmmonitor_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.util.public_api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/com.sap.security.api.ep5.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/com.sap.security.api.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/exception.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/logging.jar'.     TestSchedule          Build path
Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/prtapi.jar'.     TestSchedule          Build path
Error               The project was not built due to classpath errors (incomplete or involved in cycle).     TestSchedule
Any idea why this error occurs?
Thanks in Advance
Prabhu.M...

The error was due to path problem. Resolved Thanks

Error while creating billing documents

Hi,
While creating billing documents I am getting error message as
Maintain customizing for excise and series group determination
Message no. 8I619
I have check the setting for CIN it is OK excise and series group are maintain properly so what can be the proble,
regards,
zafar

Hi,
Check once again customizing
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Thanks
Chidambaram

Taxes display wrong in Tax Code while create PO

hi all
i m facing the problem while creating PO with 4 line items. out of 3 not having any exise duty in J1ID. the user is giving taxcode for all line items. But it is showing the values of taxes Eduty 16%, Ecess 3% and Vatt 4% for all items in PO not in the PRINT. can any give the solution.

Hi,
Go to the Table T007A, where you find the tax codes.
Input & out put taxes are the tax types.
In FTXP T.code give the tax code and click on the
Input tax codes are used for purchase cycle and out put taxes are for sales cycle. I Hope you have given the sales related tax code. Thats why system is giving the error message.
In T007 Table give the proper input and get the details.
Regards,

Getting ORA-32700 while creating database

I am getting following error when creating the database :
ORA-32700 error occurred in DIAG Group Service
The error description is as follows :
Cause: An unexpected error occurred while performing a DIAG Group Service operation.
Action: Verify that the DIAG process is still active. Also, check the Oracle DIAG trace files for errors.
The setup is as follows :
Database : Oracle 9i Rel 2.
OS : IBM AIX 4.3.3
We are trying to create the database from sqlplus/dbca. It seems that in the database creation process it is throwing the error while it is trying to create the control files.
listener.ora :
LSNR_TSEDMDB2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
TNSNAMES.ORA
LISTENER_TSEDMDB2 =
(ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
We have IBM HACMP Cluster setup on 3 machines. This machine (prcsmbk1) on which I am getting the error while creating the database is part of that HACMP cluster. While installing the Oracle database software also it gave me a list of the 3 machines which are in HACMP cluster. We are not planning to setup RAC, but still it seems like while creating the database control files Oracle is trying to perform some group service operation.
Alert log :
Sat Jan 3 03:31:18 2004
Starting ORACLE instance (normal)
Sat Jan 3 03:31:18 2004
Global Enqueue Service Resources = 64, pool = 4
Sat Jan 3 03:31:18 2004
Global Enqueue Service Enqueues = 128
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
GES IPC: Receivers 1 Senders 1
GES IPC: Buffers Receive 1000 Send 530 Reserve 300
GES IPC: Msg Size Regular 432 Batch 2048
SCN scheme 3
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 117440512
large_pool_size = 16777216
java_pool_size = 117440512
control_files = /u01/app/oracle/oradata/TSEDMDB2/control01.ctl
db_block_size = 8192
db_cache_size = 33554432
compatible = 9.2.0.0.0
db_file_multiblock_read_count= 16
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = TSEDMDB2
dispatchers = (PROTOCOL=TCP) (SERVICE=TSEDMDB2XDB)
local_listener = LISTENER_TSEDMDB2
job_queue_processes = 10
hash_join_enabled = TRUE
background_dump_dest = /u01/app/oracle/admin/TSEDMDB2/bdump
user_dump_dest = /u01/app/oracle/admin/TSEDMDB2/udump
core_dump_dest = /u01/app/oracle/admin/TSEDMDB2/cdump
sort_area_size = 524288
db_name = TSEDMDB2
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 25165824
aq_tm_processes = 1
Sat Jan 3 03:31:19 2004
clUster interconnect IPC version:Oracle UDP/IP
IPC Vendor 1 proto 2 Version 1.0
PMON started with pid=2
DIAG started with pid=3
LMON started with pid=4
LMD0 started with pid=5
DBW0 started with pid=6
LGWR started with pid=7
CKPT started with pid=8
SMON started with pid=9
RECO started with pid=10
CJQ0 started with pid=11
QMN0 started with pid=12
Sat Jan 3 03:31:24 2004
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Sat Jan 3 03:31:25 2004
Create controlfile reuse set database TSEDMDB2
MAXINSTANCES 1
MAXLOGHISTORY 1
MAXLOGFILES 50
MAXLOGMEMBERS 5
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/TSEDMDB2/cwmlite01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/drsys01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/example01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/indx01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/odm01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/system01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/tools01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/undotbs01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/users01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/xdb01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/TSEDMDB2/redo01.log') SIZE 102400K,
GROUP 2 ('/u01/app/oracle/oradata/TSEDMDB2/redo02.log') SIZE 102400K,
GROUP 3 ('/u01/app/oracle/oradata/TSEDMDB2/redo03.log') SIZE 102400K RESETLOGS
Sat Jan 3 03:31:25 2004
ORA-1503 signalled during: Create controlfile reuse set database TSEDMDB2
MAX...
Sat Jan 3 03:32:28 2004
Restarting dead background process QMN0
QMN0 started with pid=15
Sat Jan 3 03:32:28 2004
Shutting down instance (abort)
License high water mark = 3
Instance terminated by USER, pid = 47128
Diag trace file :
/u01/app/oracle/admin/TSEDMDB2/bdump/tsedmdb2_diag_49754.trc
Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/9.2.0
System name: AIX
Node name: prcsmbk1
Release: 3
Version: 4
Machine: 0002599F4C00
Instance name: TSEDMDB2
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
49754
Number of Serviceable Networks detected is less than 2
Disabling Transparent Network Failover Feature.
*** SESSION ID:(2.1) 2004-01-03 03:31:19.886
kjzcprt:rcv port created
kjzmreg2: slos err[1 19 [HA_GS_CONNECT_FAILED] sskgxn_gs_in 19]
[kjzmreg2]: Error [category=1] is encountered
Node monitor problem:[32700][kjzmreg2]
Membership is lost in DIAG group
Any help is appreciated. Thanks in advance.

Thanks a lot for all your responses. We found the issue. The issue was that when we installed 9i we selected Enterprise option which installed RAC also. And after that when we were trying to create database Oracle was thinking that we are trying to create database in RAC env. and most likely it was trying to create/sync the control files on all the machines in the cluster.
The sequence of events were as below :
1. We have 8i installed on this machine
2. We installed 9i (9.2.0.1.0) using the same ORACLE_BASE but different ORACLE_HOME. We didn't select "Custom Install". We selected "Enterprise install" option
3. We installed new installer (2.2.0.18.0 ) and then 9i patch (9.2.0.4.0)
4. While creating the database (manually & through DBCA) we were getting ORA-32700
5. We tried to uninstall (using OUI 2.2.0.18.0) 9i (including the patch) completely but it never succeeded. We noticed that when we started uninstall it did show progress for about 20 minutes and after that it didn't show any progress. It was not taking any CPU cycles and It was not writing to the log file either. Basically we were never able to cleanly uninstall 9i. We tried almost 2 to 3 times.
6. Then we installed 9i using a new ORACLE_BASE and this time we selected "Custom Install" and we did not install RAC. This is successful
7. Then we installed new installer (2.2.0.18.0 ) and we tried to install the 9i patch (9.2.0.4.0) using this new installer but it never succeeded. Then we tried to install the 9i patch (9.2.0.4.0) using the old installer version (2.2.0.11.0) and it was also successful.
8. Then we tried to create database using DBCA and it was successful and then we dropped the database which was created using DBCA and then we created it manually through SQLPLUS and this was fine too.
So basically what we learned from this exercise is that if we are installing 9i on a machine which is part of a cluster and if we don't plan to setup RAC then we shouldn't install RAC and we should do a custom install. I wish there was a option in create database stmt to tell Oracle that though we are creating database on a machine which is part of a cluster environment but we don't intend to setup RAC.
And other thing which is still a mystery is that why does the uninstall never completes successfully. One question on this : We were using the installer version 2.2.0.18.0 to uninstall the 9i software. Do we need to use the older version (2.2.0.11.0) of the OUI?

System is getting hanged while creating Adobe Form Layout

Hello,
I have Adobe Lifecycle Designer and Adobe Document Service Installed on our server, i have created Adobe form interface in transaction SFP and then a new form created with this interface passing the parameter carrid.
While creating from layout, through library section I used Text function, as I drag and drop text in to the layout, system is getting hanged everytime with message 1.275 bytes transferred.
Gurus please help me to understand this error.
Thanks,
Avinash

Get Adobe life cycle designer updated vesrion.
Also check your desktop/laptop if it has good RAM .
Adobe is quite fat application which depend upon ur sys prefomanc.
Hope this will help.
Thanks Dhiraj.

While creating import GR ,system is not saving commercial invoice number

Hi,
While creating import GR ,system is not saving commercial invoice number in database table.
Is there any enhancement or sap note to solve this isssue?
Regards,
Madhu.

Hi,
please follow the process as told u will not have any errors.
1. create import PO with all the duties. But here there are some duties which are supposed to be paid to the customs. so we select the condition type and click on conditiondetail icon and here we enter the Customs vendor number and save the PO.
2. if release of PO is there release
3. then invoice is made with customs vendor by selecting planned delivery costs in the options on the right of the screen... The number generated here will be ur Commercial invoice number which you enter while doing J1IEX_C and GR
4.Then capture excise invoice J1IEX_C
5. Then do a GR with PO
6. Then post excise invoice J1IEX_P
7. Then again do a envoice with the same PO number but select Goods/Service Items on the right.
This is the procedure to be followed for import cycle in CIN
Thanks & regards,
Kiran
Edited by: Kiran. V on Apr 28, 2008 9:30 AM

Charm--Ina ction while creating request

Hi all,
All the configuration for charm is done and now in charm workflow ima facing some issues.
In action while creating a change document in solman its automatically creating a workbench and customizing request in satellite system.
With reference to tutor ,I can select the request which i want. But in my case there is no such option existing while creating the request. Is there anyway to define the option like that.
FYI: In this i created two maitnenance cycle like one is for custtomizing flow and another is for workbench flow. Due to this reason is it creating a two requests insatellite system.
Configuration : Solamn7.0 with sp level 12
Regards
Vijay

Dear Vijay,
Before SP13 there is always by default two TR created
one for workbench &
one customizing
But the empty got deleted automatically.
Now after SP13 onwards you can choose the option by checking the box for customizing or workbench req as required.
Hope this resolves your doubt.
PLEASE REWARD POINTS.

Error "Account Coding allocation" SE 508 while creating Service Entry

Hi SAP Gurus,
I am facing problem while creating Service entry as "Error in Account coding allocation"
As for the particular PO , SE is partially created and accepted, also MIRO entry is also done.
After that PO was deleted accidentally and again undeleted.
So when Analysed , found that ESKL table is updated with deletion indicator.
Path in PO Service tab>Account assignment>Change Display-->deletion flag is set, which is in display mode and cannot be changed.
As the whole cycle is completed for partial quantity the system is not allowing to change the deletion flag as per teh path above.
Also the notes 1087090 is applied.
Spoken with the abaper also as the note which is indicating the Exit "EXIT_SAPLMLSK_001" is also not active in our case.
Waiting for the reply ASAP.
Thanks & Regards.
Anil Singh Thakur

Hi,
Check the below link to resolve your issue.
Error in account coding allocation Message no. SE508 in creation of SES
Umakanth R

Error while creating a Characteristic Variable with Replacement Path

Hi all,
    I am trying to create the Characteristic Variable ZVLOWDT (Low Date') with Replacement Path on characteristic ZSTARTDT (Start Date) and it gives the error 'Source to replace 'Low Date' is not defined.
   I have created a User Entry Variable VAR_DATE (Start Date) with interval like '01/01/2009 - 01/15/2009' and Customer Exit variable ZVCPDAY (does some calculation based on the input of VAR_DATE) on the same ZSTARTDT characteristic. I want to get the 01/01/2009 (lower range date of the selection) into this Characteristic Variable ZVLOWDT. We are in BI 7.0 and the following are it's properties:
General Tab:
Description: Low Date
Technical Name: ZVLOWDT
Type of Variable: Characteristic Value
Processing by: Replacement Path
Reference Characteristic: ZSTARTDT Start Date
Details Tab:
Variable Represents : Single value
Variable is: Mandatory
Variable is Ready for Input : unchecked
Replacement Path Tab: Replacement Rule
Replace Variable with : Variable
Variable : VAR_DATE
Replace with : KEY
Why I am getting this error, PLEASE ?
Thanks,
Venkat.

Hi Khaja,
   We could derive a Variable value from another Variable with out Customer Exit. There is a white paper.
First have the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next create the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we could get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path, PLEASE ?
Thanks,
Venkat.

Error while creating a new connection in ODSM for OVD

Hi all,
I am getting the following error while creating a new connection in ODSM for OVD.
Error log:
[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by:
=======
java.lang.NoClassDefFoundError: Could not initialize class
com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at com.octetstring.vde.admin.services.client.ServerMgrServiceLocator.getVDEAdminService(ServerMgrServiceLocator.java:58)
at oracle.ldap.odsm.model.ovd.APServerProxy.connect(APServerProxy.java:248)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticateAs(APServerProxy.java:684)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticate(APServerProxy.java:286)
at oracle.ldap.odsm.model.ovd.APServerProxy.init(APServerProxy.java:216)
at oracle.ldap.odsm.model.ovd.APServerProxy.<init>(APServerProxy.java:198)
at oracle.ldap.odsm.model.ovd.OVDRoot.connectOVD(OVDRoot.java:185)
at oracle.ldap.odsm.ui.common.Connection.connect(Connection.java:120)
at oracle.ldap.odsm.ui.common.Visit.createConnection(Visit.java:663)
at oracle.ldap.odsm.ui.common.Login.saveChanges(Login.java:215)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 28 more
How to resolve this issue.Pls suggest me.
Regards,
-Deena.

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Prblem in Refirbishment cycle while creating PO

Similar Messages

Maybe you are looking for