Prblem Service Desk configuration in Solution Manager 4.0

Hi All,
Here I have done the configuration of Service Desk in Solution Manager 4.0 by using the document which I have for release 3.2. However I have face some problem in Step “Initially create and Assign the Satellite Systems as iBase C” and “Manually create and Assign the Satellite Systems as iBase Co” .So I exclude above mention step. But still I am able to create the support message from Satellite Systems.
So can please let me know whether it will work fine in upcoming time or Do I need to test my Service Desk configuration for same.
Moreover please let me know how to test Service Desk configuration for real time environment.
Following are the step and problem which I face while doing the Service desk configuration.
<b>STEP 1 #Initially Create and Assign the Satellite Systems as iBase C</b>
To be able to use the Service Desk and Change Request scenarios in SAP Solution Manager, you need to define the Installed Base (iBase). An iBase component has to be created for each satellite system from which Service Desk messages will be sent to the SAP Solution Manager system.
The iBase components for the iBase structure SOL_MAN_DATA_REP (installation 1) can be created and assigned either automatically or manually. Note that these components and the assignments can only be created once automatically for every solution.  To refresh your existing iBase data execute IMG activity Manually Create and Assign the Satellite Systems as iBase Components.
Requirements:-
You have defined your system landscape in the Solution Manager System Landscapes(transaction SMSY).
Activities:-
1. In transaction SOLUTION_MANAGER,  open a solution.
2. Choose Operations -> Service Desk.
3. Choose Edit -> Initial Data Transfer for iBase.
The data is copied automatically. The iBase systems for the solution are automatically assigned to SOL_MAN_DATA_REP (installation "1"). An iBase component is created for each system installation number (which can be displayed by choosing System  ->  Status).
For each solution repeat these steps.
<b>Problem in STEP1 :-</b> I am not able to check the System &#61664; Status.
<b>STEP 2 #Manually Create and Assign the Satellite Systems as iBase Co</b>
In this IMG activity, you define the Installed Base (iBase) manually, i.e. for refreshing existing iBases after solutions have been changed.
An iBase component has to be created for each satellite system from which Service Desk messages will be sent to the SAP Solution Manager system.
Activities:-
1. In transaction Change Installed Base (IB52), use the input help (F4) to find the Installed Base with external ID SOL_MAN_DATA_REP.
2. Continue as follows:
•     If SOL_MAN_DATA_REP does not exist:
a) Call transaction Create Installed Base (IB51).
b) Choose iBase Category 01 (Installed Base).
c) Choose Enter.
d) Specify the iBase header data in the iBase section.
e) Specify the external ID SOL_MAN_DATA_REP and enter a short description.
•     If SOL_MAN_DATA_REP exists:
a) Choose iBase No. 1 (SOL_MAN_DATA_REP).
b) Choose the SAP WEB AS component.
3. To assign the systems as iBase components, go to the Text item tab.
Three components are included in the standard package.
4. Add all the satellite systems as text items to the table:
o     Column Short text: Description of the system
o     Column Identification: System ID, space, installation number
5. Save.
After changes have been made to a solution, repeat these steps to update system landscape data for iBase.
Note:-
Every system is only listed once in the iBases. That means a system is not listed in an iBase if it has been listed in another iBase before.
<b>Problem in STEP2:-</b> Here I am not able to find Text item tab as per point 3 .
<b>STEP 3 # Assign Business Partners to iBase Components</b>
You need to assign business partners to the new iBase components.
Activities:-
1. In transaction Change iBase (IB52), choose Goto -> Partner
2. Assign business partners with the following functions to the new iBase component systems:
o     Administrator
o     Key User
o     Sold-to Party
3. Save.
4. Repeat these steps for each iBase component.
<b>Problem in step3 :-</b> In IB52 t-code screen there no any menu path like goto &#61664; partner
Thanks a lot,
Harshal

Hi Harshall,
You have to enter the value as 1 in Installed base field and then press enter.
You will be taken inside and then you will be able to see the Goto - Partner screen.
Hope this will help.
Please reward points suitably.
Regards,
Naresh.

Similar Messages

  • Service desk configuration for solution manager

    hi this ,
    sudheer i have configured the service desk configuration on my solution manager system with all satellite system, i have mapped all business partners in my satellite systems to solution  manager , and also iam able to see  all messages are  send by business partners  using  DSWP transaction, but how to see reply from solution manager sytem to  satellite system ( message inbox of satellite system)
    can any body tell the configuration of satellite system to see reply message from solution manager ?
    thanks and regards
    sudheerkoppala@ g ma il .com

    >
    sudheer koppala wrote:
    > sudheer i have configured the service desk configuration on my solution manager system with all satellite system, i have mapped all business partners in my satellite systems to solution  manager , and also iam able to see  all messages are  send by business partners  using  DSWP transaction, but how to see reply from solution manager sytem to  satellite system ( message inbox of satellite system)
    >  can any body tell the configuration of satellite system to see reply message from solution manager ?
    There is no "message inbox" in satellite systems, but you can use the SAP Solution Manager to have a central access to all reported messages.
    Configure Work Center "Incident Management" in SAP Solution Manager and grant access for message reporters.
    See answers to similar question in accessing the service desk message from satellite system
    Best regards,
    Ruediger

  • Service desk issue in Solution manager

    Dear Friend's
    I have configured Service desk in our Solution manager .
    Solution manager version is 7.0 , on windows 2003 & oracle 10.2.0.2.0.
    I am able create messages in our satilite systems . And sending to solution manager also.
    Here issue is , when I click on send button in created message box , then our satilite system will asking password of basis user , which is present in solution manager. If I entered that password then It shows successfully send message with number.
    I want's to skip the screen , where it's asking the basis user ,password.  
    So please give me solution , If you come across this problem.
    Thanks  in advance,
    R.k sindol
    Edited by: Raj kumar sindol on Jan 20, 2009 3:30 PM

    Hello Raj,
    see SAP Note [153743|https://service.sap.com/sap/support/notes/153743] chapter "In the R/3 system of the notifier (customer data entry systems).". Changing that RFC destination should be the solution for your case.
    Best regards,
      Andreas

  • Is there any service desk guide for Solution Manager 7 configuration?

    Dear Sir:
    I would like to configure the service desk of solution manager 7.
    but all i found documents are for solution manager 4.
    the IMG setting and other steps are quite different...
    wondering is there any new guide or step by step documents for specific solution manager 7?
    Regards
    Jack Lee

    hi,
    There is no direct document which is that much specific
    Have you checked this document
    https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000122472008E
    U can follow the steps and if u dont find any node u cn search in SPRO
    in solman 7 mainly all the activities are under the node SPRO->scenario-specific->service desk
    rest check this
    Service Desk: Support team determination
    /people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
    Service Desk Implementation Guide
    /people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
    Hope it helps,
    Regards
    Prakhar

  • Configure Service Desk in SAP Solution Manager

    Hi guys,
    I'm currently trying to configure SAP Service desk to our custumers but i really dont know how much steps i must take to do that.
    Im currently have users from satellite systems generated by tcode BP_GEN in Business Partners.
    But, how it really goes?
    When i using the following site:
    http://ip:8000/sap/bc/webdynpro/sap/ags_workcenter?sap-client=001&sap-language=EN
    which data i must provide to logon on workcenter!
    How can i assign systems from one customer to the user that represents it to, when he logs to the workcenter, he can see the respective system information that belong to him.
    I know that i must provide diferent roles for the administrator  and the users that represent the customer!
    Can anyone give any ideas or a point of direction?
    Regards,
    Filipe

    Hi
    Based upon the BP identification system entries maitained for respective users
    they/Reporter can see only those systems in the list
    Rest is same for all users they have to logon with userid pwd of solman in the URL
    and automatically based upon the roles you have assigned to them in su01 they can see the reporter or processor interface of service desk
    Regards
    Prakhar

  • Service Desk Customizing in Solution Manager 4.0 SPS12

    Hello,
    I try to customize the service desk in solution manager SPS 12.
    I follow the IMG :
    1. General Settings of solution Manager (Profiles...) => OK
    2. Connection to SAP => OK
    3. System Landscape and Solution
        Only One system my solution Manager. => OK
    4. Service Desk BC Sets => OK
    5. Business Partner :
        I have created two key users (KEY_USER1 & KEY_USER2) as BPs (101 & 106)
        I have created One System Admin (ADMIN) as BPs (105)
        I have created two Message Processors (PROC1 & PROC2) as BPs (102 & 103)
        I have created one Org. as BPs 104.
    => OK
    6. iBase
       I have initially created the iBase from my solution => OK
       I try to assign the partner to the iBase component => First Problem : the system do not propose the System Admin & key user function when I go to Goto->Partner. Do I miss something ?
    7. Org Model
      I try to create my Org. model as follow :
      Service Desk (O)
             Team 1 (O)
                 Processor1 (S)
                     SDUser1 (BP)
                         PROC1 (U)
             Team 2 (O)
                 Processor2 (S)
                    SDUser2 (BP)
                         PROC2(U)
    => Second problem : it is said in the documentation and in some blogs on the sdn, that when we create the root org, and the subsequent org, the system will create and assign automatically the BPs. That doesn't work in my system. I do not understand why. So I have assigned directly the position conatining the Users Proc1 & Proc2 as BPs.
    8. Partner Determination
        Then I would like to assign automatically messages created by KEY_USER1 to PROC1 and messages created by KEY_USER2 to PROC2 depending on the user group they belong (or depending on the relationship they have with the messages processors).
        => Third Problem : I don't how to do it ! and i don't know what to do with the partner function Support Team.
    Could someone help me.
    Thanks in advance.
    Guillaume Bruyneel.

    hello,
    I found some interesting information concerning the automatic creation of BP from the Org. Model :
    I have activated the HR integration through :
    IMG->CRM->Master Data->Business Partner->Integration Business Partner-Organisation Management.
    And NOW the automatic creation of the BP is working !
    I'm still trying to solve the two other problems.
    Guillaume.

  • Define Service Desk destinition in Solution manger system

    Hello Guys,
    We are in to the implementation of SERVICE DESK Implementiation.
    When we are trying in Defining Service Desk destinition in solution manager system we found that there is no EXECUTE button.
    In my finding i found there is a missing  the patch  and suggested go head with the patch attachement S/W component Name  BBPCRM S/W Component Relese : 500 SP Level :11,Highest Support Pack level : SAPKU50011.
    For furthur proceedings we required to define the service desk desitintions in soluiton manger.
    Suggtions are very helpful for furthur proceedings and can be rewarded.
    Aniruch

    Hi
    You need ST PI and ST API latest patches in connected systems to solman like R/3 etc
    and there is plenty of material available on SMP and SDN search
    can check these links
    /people/kamran.ellahi2/blog/2006/01/13/setting-up-sap-service-desk-123-and-go
    /people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
    /people/community.user/blog/2009/09/02/service-desk-sold-to-party-determination
    also adva set up guide
    https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000122472008E
    Regards
    Prakhar
    Edited by: Prakhar Saxena on Apr 1, 2010 12:24 AM
    Edited by: Prakhar Saxena on Apr 1, 2010 12:27 AM

  • Service Desk Configuration (Raising message from R3 system)

    Hi,
    I want to configure my R3 system, so that when I create a support Message it is reflected in Solution Manager.
    I have done the following steps, in R3 system
    1) Use transaction SM30 and modify BCOS_CUST table.
    Entries in this table are
    Col 1: OSS_MSG
    Col 2: W
    Col 3: SOLUTION_MANAGER (Not sure, what is the right entry for this column)
    Col 4: CUST620
    Col 5: 1.0
    I am confused over the entry for Col 3:
    In some postings I have seen that the value is SM_<sysid>CLNT<client>_TRUSTED, so assuming my Solution Manager SID is SL3 and Client is 100, the value for Col3 must be
    SM_SL3_CLNT100_TRUSTED
    Is the above assumption right?
    2) Is it necessary to make entries for RFC destination in my R3 system using transaction SM59.
    Also while creating the RFC Connection using transaction SM59 in the R3 system, it asks about the type of connection.
    Which type of the connection, should be chosed.
    Type :: Short text
    I :: Connection to application server with same database
    3 :: Connection to R/3 System
    2 :: Connection to R/2 System
    T :: Start an external program via TCP/IP
    L :: Reference entry (refers to another destination)
    S :: Start an external program via SNA or APPC
    X :: RFC via special ABAP/4 driver routines
    M :: CMC connection
    H :: HTTP Connection to R/3 System
    G :: HTTP Connection to External Server
    Hope you can help..
    Regards,
    Vikas

    Hi,
    The third one is RFC destination which is a way of linking two systems providing there ip and login credentials.
    When you create RFC in sm59 tcode you have to provide ip address and login credentials and a name,This name you have to provide in se11 bcos_cust table third field.
    You have to create an R/3 or abap connection.check this for creating rfc connection.
    http://help.sap.com/saphelp_nw04/helpdata/en/26/64f62cfa8911d386e70000e82011b8/content.htm
    Check the following .
    /people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
    in short first of all go to tcode sm59 create a r/3 connection to your server and provide a name to it.
    secondly go to bcos_cust table and provide this name in the third field.
    Please reward points if it helps.
    Message was edited by:
            Prakhar Saxena

  • AS Java (Config Wizard Configuration to Solution Manager)

    Hello.
    While I try to configure "NW:Solution Manager-AS Java(Config Wizard configuration to Solution Manager)" in NWA I receive the following error:
    Error: Name or password is incorrect (repeat logon)
    Step: J2EE User: SOLMAN with SID and Client extension
    Why the program uses the user "CTC_NULL" (in the attached log) to login to the destination?
    I never created such user.
    I am grateful for every tip.
    Log:
    J2EE User: SOLMAN with SID and Client extension
    Description
    No specified detailed description
    State
    START_ACTION_ERROR
    Result
    A user with the name SM2CTCSMR001 exists in the System
    Checking the step
    Please go to the J2EE Engine Useradministration using an user with administrator role (e.g. Administrator)
    Take care that 'user' is selected in the combo box and enter the user name SM2CTCSMR001 into the input field, then press the 'Start' button
    If the user exists, he will be shown in the table, if you select the entry you can see details about him
    Executing the step manually
    Please go to the J2EE Engine Useradministration using an user with administrator role (e.g. Administrator)
    Press the 'Create User' button
    The create user dialog appears
    Please execute following steps in the 'General Info' Tab to create the user:
    In the input field Logon-Id enter the name SM2CTCSMR001
    In the combo box 'Security Policy' select the entry 'System User (Internal RFC and Background Processing)'
    Please enter a password and confirmation for the user
    Press the save button to save the user
    Support Information
    Type of Action
    InvokeServiceDebug Events
    error message
    Error: Name or password is incorrect (repeat logon)
    InvokeService:J2EE User: SOLMAN with SID and Client extension
    Library: sap.com/tclmconfig~content
    SourcePath ./com_sap_sm_ctc_scenario_simulate/com_sap_sm_ctc_scenario_ui_process/ext_1206447991146/proc_1197052628227/proc_1207325025157/proc_1207755933502/maintainUser
    Time 2012/02/29 at 08:46:42
    WSDL content/common/service/usermanagement/maintainUser.wsdl
    Destination parameters
    user : CTC_NULL
    password : % secure content %
    host : host1
    sysnr : 00
    client : 000
    language : EN
    Execute Java Service
    Library: sap.com/tclmctcutilcore_ear
    Class: com.sap.ctc.util.core.services.UserFacade
    Method: void com.sap.ctc.util.core.services.UserFacade.maintainUser(java.lang.String, java.lang.String, java.lang.String)
    Arguments (3)
    userName : SM2CTCSMR001
    password : % secure content %
    userType : password1
    InvokeService- Result: ERROR
    Refresh Env. Messages: false
    Duration: 0.141 sec
    Exception Class: com.sap.mw.jco.JCO$Exception
    Exception Message: Name or password is incorrect (repeat logon)

    Hi,
    As far as we could see, you're facing an authorization issue. To solve
    that...
    Can you check that the user executing the task (SOLMAN, i suppose) is
    assigned the authorization - you can run an authorization trace using
    transaction ST01 (check only the authorization box) and reproduce the
    issue. The resulting trace should show which authorization failed. Once
    this is established the necessary authority can be assigned to the user.
    Thanks,
    Regards
    Vikram

  • Solution Monitoring configuration with solution manager 4.0

    Hi Friends,
    I have to the Solution Monitoring configuration with solution manager 4.0.
    Please provide steps or screen shot if any body having that.

    Hi,
    Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
    This will solve your problem.
    Feel free to revert back.
    --Ragu
    Message was edited by:
            Raguraman C

  • EWA Configuration in Solution Manager 7.1 in SP08

    Hi All,
    Could any one please advice on the Changes that has been taken place for EWA configuration in Solution Manager 7.1.
    Warm Regards,
    Sudhakar G

    Hi
    In addition to above also check below wiki link
    How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
    and below as well
    Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
    I assume you have done post setup etc
    Regards
    Prakhar

  • Problem with the Sevice Desk VAR to Solution Manager 7.1

    Hello Gurus,
    I have a problem with the Sevice Desk VAR to Solution Manager 7.1,
    When I want to send a message to SAP I can't see the text "Send messange to SAP",  in the Actions to Message only I can see "Send Notification to SAP" but I can't see the message in the Marketplace when I click on this Action. In the tab "Action Log" show me two error messages:
    1.- "Find support team responsible, when message is created", when I click on Detail the log shows "Message Text
    Error in resolution of rule 'AC13200137' for step '1' ".
    2.- "Create/Change Basis Message from CRM Procedure", when I click on Detail the logs shows "For object DNO_NOTIF , number range interval 01 does not exist DNO_NOTIF".
    I think that this is the reason why didn´t appear the options of Actions to Messages.
    Pleas any idea about how to fix this issue?
    Best Regards
    Omar
    Edited by: Omar5x8 on Dec 30, 2011 2:12 AM

    Dear Mateus,
    happy New Year and thank you for your suggestion,
    I follow the recomendation of Vicent Lim.
    I createad a new message from WorkCenter "Incident Management" on Solman, it was create with solman_admin user which have this roles " ZSAP_SMWORK_BASIC, ZSAP_SMWORK_INCIDENT_MAN, ZSAP_SUPPCF_CREATE, ZSAP_SUPPCF_PROCESS, ZSAP_SUPPDESK_CREATE,ZSAP_SUPPDESK_PROCESS",  and I want to sent to SAP with the message processor(ogarcia) user(with role "employee") with the following roles " ZSAP_SMWORK_BASIC, ZSAP_SMWORK_INCIDENT_MAN, ZSAP_SUPPCF_CREATE, ZSAP_SUPPCF_PROCESS, ZSAP_SUPPDESK_CREATE,ZSAP_SUPPDESK_PROCESS" but I can't see the text "Send message to SAP".
    Also I re-active the BC-Set from IMG and I checked in the transaction SCPR20 and I get two error messages:
    1.- Activation of customizing object cRMC_TV_PROCTYPE with errors.
    2.- BC Set SOLMAN40_SDESK_VAR_SIVA: The activation of customizing object CRMC_TV_PROCTYPE is not supported).
    I believe that I need one note o maybe a support package that fixes this bug since that version
    of Solman is 7.1 SP3.
    Please could you help me with this?,
    Best Regards,
    Omar

  • Solution manager service desk - configuration -pls help

    Hi Forum,
    I have completed basic configuration of service desk (solution manager 7.1) and able to realize things like create/process/confirm message and email notification after automatic support team determination (which works well based on component). However facing below issues and have few requirement.
    1. Once the support team gets determined automaitcally based on component field 'Support Team' gets filled with a predeifined value which is obvious however furhter to that when i wish to change the 'Support Team' manually its grayed out i.e. i am not able to change it as it goes to non-edit mode. how to solve this issue?
    2. In mail notification if message is raised from the satellite system or solution manager itself i am receiving the details of the system e.g. products installed and software components which makes message unneccesarily long. Can i configure system to produce e-mail noification without system info so that a notification can be kept short. (This is required as client needs to use service desk for internal purpose and not happy to see the system information as its increasing the length of the message)
    3. While creating organizational structure in /nppoma_crm . i have created organizational unit/Support team/support employees..now in support team determination e-mail notification goes to the determined supoport team (to bp for which e-mail id is entered) however it doesnt goes to the employees mapped under support team as members (pls note bp for each member is maintained along with the e-mail id)
    4. I would like to know the method used for automatic sold-to-party determination as like support team determination & is it possible to reset the number range as while test plenty of messages got created e.g. 8000000584/8000000585/8000000586 to be reset to 8000000001 again so client can start from 8000000001.
    Please help by sharing your thought on this at earliest.
    Regards,
    Rupesh
    Edited by: rupesh_modi12 on Dec 23, 2011 12:25 PM

    Hi Jitu,
    Thank you very much for sharing the links. However sad to say after succesful configuration still the issues mentioned below remains same :
    1. Once the support team gets determined automaitcally based on component field 'Support Team' gets filled with a predeifined value which is obvious however furhter to that when i wish to change the 'Support Team' manually its grayed out i.e. i am not able to change it as it goes to non-edit mode. how to solve this issue?
    2. In mail notification if message is raised from the satellite system or solution manager itself i am receiving the details of the system e.g. products installed and software components which makes message unneccesarily long. Can i configure system to produce e-mail noification without system info so that a notification can be kept short. (This is required as client needs to use service desk for internal purpose and not happy to see the system information as its increasing the length of the message)
    3. While creating organizational structure in /nppoma_crm . i have created organizational unit/Support team/support employees..now in support team determination e-mail notification goes to the determined supoport team (to bp for which e-mail id is entered) however it doesnt goes to the employees mapped under support team as members (pls note bp for each member is maintained along with the e-mail id)
    4. I would like to know the method used for automatic sold-to-party determination as like support team determination & is it possible to reset the number range as while test plenty of messages got created e.g. 8000000584/8000000585/8000000586 to be reset to 8000000001 again so client can start from 8000000001.
    Regards,
    Rupesh

  • Service Desk configuration

    Dear All,
    I am in the middle of the configuration of SAP Service desk,
    i am able to create message and message are going from Quality Server to Solution manager server fine,
    here i can view  the message,
    i am unable to properly process the message, like how do i reply to the person who has created message in Quality server.
    i am not seeing any change when i set the message status to Customer Action,
    from where customer will view his or her message,
    please clarify these points.
    Regards,
    Irfan.

    Hi
    Have already seen this how to guide for service desk for EHP1
    https://websmp108.sap-ag.de/~sapdownload/011000358700000776062009E/Howto_ServiceDesk.pdf
    Secondly you can check for security for access related stuff
    https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000075728&_OBJECT=011000358700007187872005E
    Hope it helps.
    Regards
    Prakhar

  • Support desk queries on solution manager

    Hi All
    I have few queries on solution manager support desk functionality.
    1.Is this the only way to create support desk message HELP-CREATE support desk Message from each individual system??
    2.In our scenario,when we are creating the message we would like to assign component( it should be project specific component,not SAP specific component)...How to acieve this??
    3.We have a requirement where the message has lot of status and fields and depending on the message processor I would like to control which status or field user should be able to view and work on...how to achieve this??
    4.Need the way to send a message to the processor,as soon as his name appear as message processor.
    5.I want to track all the persons involved in the message processing,how can I do this??
    6.I want to use a different transaction type not the standard SLFN,so what configurations are needed??When I create a message it should automatically take properties of transaction type of newly created one??

    Hello Dolores,
    first of all thanks for that answer. I read it in the germany documentation help.
    Here an extract:
    +Anlegen von Support-Meldungen über NOTIF_CREATE
    Mit der Transaktion NOTIF_CREATE können Benutzer, die in Satellitensystemen arbeiten, Meldungen anlegen und an den SAP Solution Manager versenden.
    Vorgehensweise
    Starten Sie Transaktion NOTIF_CREATE.
    Geben Sie folgende Werte im Dialogfenster Anlegen einer Support Meldung ein:
    Priorität
    System/IBase-Komponente
    Kurz- und Langtext
    Um Anlagen anzuhängen, wählen Sie Registerkarte Anlagen.
    Sichern Sie Ihre Eingaben.
    Ergebnis
    Sie haben eine Support-Meldung angelegt.+
    Yesterday I search the internet for a note, but I didn't find one. So I'am happy now.
    But now the next problem occurs. My next issue is about the SLD. The system cannot get the data from the satellites. I'am not sure, but I think our SLD isn't perfectly configuried. Do you have an "How To" or something like that?
    regards
    marc

Maybe you are looking for