Pre-Configure QT 7 Installation for only specific file types

Is there an 'ini' or similar configuration file or command line option set I can use to pre-configure QT7 to only associate with specific file types?
I want to leave the associations for Media Player intact and have QT handle only MOV and other Apple-specific file types.

Basic answer. No.
You set file associations after the install of QuickTime.
Most of it's adjustments and options are found in its Control Panel. Here you can set associations for MIME types that control the browser plug-in.
Each user can set their own values.

Similar Messages

  • How to setup a routing rule for a specific file type for the content organizer?

    Hello,
    how can I set a routing rule for a specific file type, for example for "pdf" or for "docx", for my content organizer?
    As standard I can only choose for the rules the content type, name and title of the file uploaded.
    Thank you in advance!
    JohnyG

    Hi Johny,
    Based on your description, my understanding is that you want to create a routing rule for a specific file type.
    I recommend to create rules with the conditions as the image below shows for the Document content type(for example: .docx files):
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • 2012 Deduplicated volumes - hydrate only specific file types

    I have a file server with roughly 4 TB of data. We have found that turning on 2012 Dedupe feature is causing corruption with Access databases. Databases worked fine for a week or better before we turned on Dedupe. Everything else appears to work fine.
    I know I can exclude specific file types (ie. AACDB, MDB, etc).  Simply excluding them won't re-hydrate the currently deduped database files correct?
    Is there a version of the start-dedupjob -type unoptimization where I can specify a file type so that I can just hydrate specific files?

    The corruption didn't start until after I migrated these file shares over to the 2012 server and enabled dedupe
    After we first noticed the problem, we moved just the databases back to a 2008 file server and didn't have any more problems.  Due to some other issues with backups, I moved all the data on the 2012 server to another drive on the same server and left
    dedupe turned off.
    I had to wait for about a week before turning dedupe on for the new hard drive.  During that time my users were able to work in a database that didn't get moved to the 2008 server.  A couple of days after I deduped the drive they are getting corruption
    issues again.
    2012r2 file server
    Win 7 clients w/ Office 2010
    Deduplication is implemented as a filter driver over NTFS. So I can bet you have some backup application installed (SQL Server specific?) and it has own filter drivers conflicting with MS dedupe. What apps do you run on that box except SQL Server (obvious)?
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • Jar only specific file types

    Hi Folks
    Is there any option to feed my requirement ?
    I have below folder structure
    acme/hmtl/1.html
    acme/html/2.html
    acme/html/3.css
    acme/css/2.css
    acme/css/1.css
    acme/css/3.html
    I want to create jar which should contain only html files. But the recurssive folder structure can extend to any number. And the jar should contain the exact folder structure same as source. I need to execute the command from parent folder level and it should jar all the html files in same folder structure...Any luck :(

    Your best bet - and something that's a good idea anyway - is to get hold of, and learn to use, Apache Ant. It'll do what you need, and a lot more.

  • Creating a pre-configured SQL instance installation file

    Hi,
    Is it possible to create a pre-configured SQL instance installation file?
    I want to pre-configure authentication mode, sa password, collation etc so that users will just need to run the .exe and everything will be done for them. At the moment users need to run a batch file that contains the unattended installation script, but
    that is proving to be too much for some...

    Hi RRozanski,
    To meet your own requirement, you can firstly change the ConfigurationFile.ini file which is generated by SQL Server setup wizard. Then users can install SQL Server with the new ConfigurationFile.ini file via installer wizard as follows.
    Go to SQL Server Installation Center and click on the Advanced page. Click on Install based on configuration file, specify the location of the ConfigurationFile.ini file and the SQL Server setup.exe location. You can find setup.exe at the root level of the
    SQL Server installation media.
    Like a normal installation you can see all the screens with the prefilled information and this gives you the advantage to review or make changes if needed.
    For more details, please review below blog.
    Standardize SQL Server Installations with Configuration Files
    http://www.mssqltips.com/sqlservertip/2511/standardize-sql-server-installations-with-configuration-files/
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • Acrobat Pro XI scans both sides (blank backs of pages) when pre-configured to scan front side only

    Acrobat Pro XI scans both sides (blank backs of pages) when pre-configured to scan front side only; using Brother MFC 9840CDW and Windows 8 (was not a problem with previous Acrobat version).  Help, please?

    Update:  No solution has been discovered; and, I did check the Brother settings (since it allows two-sided printing) - nothing awry there.  Acrobat behaves normally when scanning from the flatbed (as opposed to the doc feeder).  Using Acrobat to delete every other page (blank ones) after scanning is not a viable option.  Please, any thoughts on this issue?

  • Search For Specific File Type (eg .txt)

    I know how how to find files in a folder using Java but how do you search for specific file types. I am looking only include files with the extension .txt in my search.

    Cheers. I already looked at that. Got a program that parses a XML and had a play about with it. Can print the contents of tags in my XML. Its just that im trying to parse my XML and have the contents of the starts_with tag to appear in startsWith(or a variable to which this has been assigned) and the contents of the extension tag to appear in endsWith. Totally clueless on how to go about it.
    Below is my class. Would be greatful if you have any ideas.
    import java.io.File;
    public class FindLatestFile {
                 public static File getLatest(File thisDir){
                         long latestModDate = -1;
                         File latestFile = null;
                         File[] fileList = thisDir.listFiles();
                         for(int i=0; i < fileList.length; i++){
                             File file = fileList;
         if (file.lastModified() > latestModDate & (file.getName().startsWith("A") & file.getName().endsWith(".txt"))) {
         latestModDate = file.lastModified();
         latestFile = file;
                             return latestFile;

  • Can we give UNIQUE ACCESS FOR THE SPECIFIC FILE IN THE LIBRARY in SP2013? How can we remove users from SHARED WITH link where files are shared with users?

    Hi,
    Any help on this?
    Thanks
    srabon

    Hi srabon,
    For giving unique access for a specific file in a library, you can go to the library, and select the file , and click FILES->Shared With->ADVANCED, under PERMISSION ribbon, click ‘Stop Inheriting Permissions’, then the file will have unique permissions.
    For removing the shared users for a file, firstly, like the above steps, select the file , and click FILES->Shared With->ADVANCED , make sure the file has unique access, then select the users that you want to remove, and click Remove User Persmissions
    under PERMISSIONS ribbon.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • For a specific PO type, trigger the workflow

    Hi Gurus,
    I have a requirement, for a specific PO type WF should be triggered.
    In my case, I am using BUS2012 for PO type.
    In basic data->start evenets, I add BOR Object as BUS2012 and even as CREATED.
    Now, when I click on conditions, I do not see BSART/PO type as one of the attributes of the std business object.
    In this case, what additional needs to be done or is there any other way to do this?

    Hello,
    If you cannot find a suitable attribute in your business object (in this case BSART), the normal way to do this is to add this new field to the business object in SWO1. Since you cannot modify SAP standard object, you can create a Z-version (BUS2012) of it. This must be a subtype of the standard object and you must do a so called delegation between the standard and custom object. Delegation means that your system starts to use the Z-version instead of the standard one, and thus you can use all methods/attributes that you create in your Z-object. In any case, this is absolutely basic stuff for any WF developer and you should find lots of instructions how to do this by searching.
    Once you have the Z-version done & delegated, just add the new attribute BSART to it, and you are free to use it in your conditions.
    Regards,
    Karri
    Edited by: Karri Kemppi on Dec 13, 2011 3:35 AM

  • Searching for a specific file size

    Hello,
    It's been a while but it seems like XP let me search for specific file sizes - e.g. if I wanted to search for files that were greater than 10GB or if I wanted to search for files less than 20GB.
    I can't figure it out in Windows 8.1.
    If the answer is possible through standard search and not powershell, I'd prefer the GUI way.
    Thanks

    In File Explorer (was Windows Explorer), type the search criteria into the box in the top right of the screen and press Enter.
    Example searches are:
    A minimum file size, simply type size:>30,000KB into the Search box and press Enter.
    type:=.pdf or type:=.doc will display specific file types.
    filename:x will display files using a partial filename. x represents the partial filename you want to search for.
    kind:video, kind:music or kind:pictures will find all the videos, music or pictures.
    If you just click or tap in the Search box, Search Tools will appear which allows the choosing of a Kind, a Size, Date Modified, Other Properties and Advanced search. In Folder Options > Search Tab, the search options can be changed, e.g. Find partial
    matches.
    Providing the location is indexed, you can search in File Explorer for a specific word or phrase by typing content:
    followed by your phrase enclosed in double quotes. This will produce a list of files matching the criterion.
    Speed up the search by opening File Explorer (was Windows Explorer) at the folder you want to search, rather than at the root folder. Also, pressing F3 will show Search options like Date Modified and Size.
    Ninety-nine per cent of politicians give the rest a bad name.

  • SQL query/report for "count of specific file type"?

    I figured this would be a good first post, as I have found every question I have had to date by browsing the forums, but I am stumped with this one. I recently expressed some concern to HR regarding the use of...lets call it "unauthorized content"
    on our network. Getting little to no response, I would like to produce a report containing a total count based on specific file type. For example, how many .mp3 files are stored on company equipment, how many torrent files (sadly, this is true), etc.
    Having very basic knowledge of SQL, I am puzzled where to start. I am currently using SCCM SP3 and SQL 2008 R2 with both basic reporting and SSRS enabled on the site.

    You'll first need to inventory those file types then here's some reports for you.
    Get the pstreports from my skydrive, import them and you can cange the file type to mp3 or whatever you need. I monitor mp3 files too.
    http://cid-6a8d30f2bc0666d0.office.live.com/browse.aspx/SCCM%20Custom%20Reports
    John Marcum | http://myitforum.com/cs2/blogs/jmarcum/|

  • Spotlight: How to search for specific file types?

    Hi. I'm looking for bookmarks that may contain a particular word. Is there a way to filter my spotlight (or finder) searches just for a particular file type? I know you can sort results by file type, but it's rather just filter in the first place...

    Command F should do it. Once the search window appears, you should see a drop down box headed kind and next to it one headed any. Select PDF from the any one. Click the plus button, and another field will appear and you can see again more drop down boxes. You just want to set these up so you end up with name and contains, you can then add your text to the remaining field.
    Also see [this|http://apps.tempel.org/FindAnyFile/index.html]
    Message was edited by: gumsie

  • Advice on allowing specific file types to be written to USB flash drive

    We currently have all of the Removable Storage Access policies enabled (Computer Config > Policies > Admin Templates > System/Removable Storage Access) and would like to know if it is possible to allow specific file types to be exempted from this
    policy. Specifically we need to allow certain users to write to USB flash drive but need to limit to MS Office files only.  Is this possible?
    Thanks in advance for any assistance.
    -Mike

    > Specifically we need to allow
    > certain users to write to USB flash drive but need to limit to MS Office
    > files only.  Is this possible?
    Third party products can do that. GPO cannot.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • How to define the application to use for opening each file type (pdf, jpg,...)

    I installed an external application, and this new application has been configured by defect that it will be used to open all files with extensions like jpg, pdf, etc...
    I want to revert this situation and define again the proper application I want to use for opening each file type. How can I do this in Lion?
    Thanks,
    Azaldier

    Pick a representative file.
    Get info. (Command-i)
    There you will see a place "Open with" where you can select the application for that file.
    Hit the "Change all..." button to do this for all files of this type.
    charlie

  • Premiere Pro CS5 crashing when exporting (only certain file types)

    Hi
    I have found that when I try and export media in Premiere Pro CS5, it often crashes during the export. It says
    It's only certain file types. For instance, Vimeo HD seems okay but Vimeo SD always crashes mid-export. MPEG is okay too, but MPEG2-DVD always crashes.
    Sometimes it says this: "Error Compiling Movie - Unknown Error" but doesn't throw me out of Premiere altogether.
    Other times it crashes altogether and Windows gives me this error message: "Display driver NVIDIA Windows Kernel Mode Driver, Version 258.96 stopped responding and has successfully recovered". Premiere Pro then stops responding so I have to re-open it and start exporting again.
    I have checked there are no gaps in my timeline and I have rendered the whole work area. Besides, I doubt it's anything that I'm doing wrong with the project itself because it's exporting fine in some formats.
    I am also experiencing random crashes when editing too. Not that often, but occasionally it throws me out - and twice it has made the whole screen go crazy, with weird dotting across the screen (it's scary, it looks like the monitor itself has broken!).
    Any help would be appreciated!
    Nick
    PS I have a pretty decent new PC - Dell Studio XPS, 8GB, 2x1TB drives, etc. Premiere itself is working great, except for these crashes.

    Some drivers do not work well in some systems... so go to nVidia and try a different (usually newer) driver for your card
    These notes are for Encore, but they MAY also work in Premiere
    Long File Names or odd characters Cause Crashing http://forums.adobe.com/thread/588273
    And #4 Here http://forums.adobe.com/thread/666558?tstart=0
    And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

Maybe you are looking for