Pre populate adapter not working properly on one of the managed server
Hi,
We have two managed servers for OIM 10g. A load balancer has also been installed for directing the traffic on to these two servers i.e. z1 and z2. So whenever, the request is redirected to z2 server, pre populate adapters for AD and ACF2 resource provisioning fails. The same is working perfectly when the request goes to z1 server.
We checked the below logs but didnt find any fruitful outcome.
1. xellacf.log-- log file for ACF2
2. xellAD.log-- log file for AD
3. xell.log
Please help us out. Let me know if you need any other information.
Any inputs would be highly appreciated.
Thanks,
Garima
have you uploaded jars in DB using UploadJar utility? verify same in OIMHOME_JARS under OIM schema.
Provide the detail error log <OIM_DOMAIN>/servers/oim_server2/logs/oim_server2.log and diagnostic log as well
--nayan
Similar Messages
-
I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE HIS PROBLEM
I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE THIS PROBLEM
Have you tried going to System Preferences>Mouse and making sure that right click is set to secondary click?
-
In photoshop cc is not working properly right button on the tablet stylus genius
in photoshop cc is not working properly right button on the tablet stylus, when clicked, the menu appears and immediately disappears in Pshotosho CS6 everything was OK, and in other programs all OK.
Tablet - Genius G-Pen M712X.have you participated on here before, smihop? -- do Adobe representatives ever provide a solution? I pay monthly for all adobe cloud applications <-- doesn't it seem like that should come w/some kind of support? (especially when they push out buggy releases <-- which make me wish I could go back a version)
-
I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...
bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regardsDo you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up -
Monitoring info not appearing in console for one of the managed server
Monitoring info not appearing in console for one of the managed server though server is running fine. It happens some times. I tried to get these info from executruntimeMBean, but that is also not returning any info for that server. The entry for that server get erased from running-managed-server.xml after some time. Any idea why?
hi Arun,
Please find the below diagnostic module config fom the condig.xml
<server-diagnostic-config>
<data-retirement-enabled>true</data-retirement-enabled>
<wldf-data-retirement-by-age>
<name>DomainHealth_WLDFRetirePolicy_m2ap5</name>
<enabled>true</enabled>
<archive-name>HarvestedDataArchive</archive-name>
<retirement-time>2</retirement-time>
<retirement-period>6</retirement-period>
<retirement-age>1</retirement-age>
</wldf-data-retirement-by-age>
</server-diagnostic-config>
This configuration was present earlier also, but it looks like the logs statrted accumulating recently due to some other changes made to console. There is nothing coming under the WLDF console extension in server admin console.
Other than changing the start script, will it be fine to go the file location ./server/data/store/diagnostics/WLSDIAGNOSTIC**.DAT and delete the older file while the server is running now?
Incase not posisible , an example on the change in startscript and the config.xml will b helpful
thanks
JZWL -
I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900 AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900 AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900 AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?FernandoRocker wrote:
Well... instead of looking into this with Engineering, I would prefer you to talk about this with the Sales department and exchange my WRT1900AC for an EA8500 (I will pay the difference if needed). Seriously. The device is useless. Not just a paperweigt... an expensive paperweight.Actually I looking into the swap for you because I think that would be best in your case. Keep this in perspective. There is laterally millions of WRT1900AC V1 out there with very few issues with latest firmwares and of course the odd exception. In your case it could be a defective WRT1900AC. -
I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.
-
Not working properly Computer Browser service in Windows Server 2012
Good afternoon.
Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
all.
Looked packet sniffer:
Microsoft Windows Lanman Remote API Protocol
Entry Count: 70
Available Entries: 251
So on Master Browser shows 251 computer, and the client 70.
If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
- Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
- DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
- SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
EthernetType: Internet IP (IPv4), 2048(0x800)
- Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
- Versions: IPv4, Internet Protocol; Header Length = 20
Version: (0100....) IPv4, Internet Protocol
HeaderLength: (....0101) 20 bytes (0x5)
- DifferentiatedServicesField: DSCP: 0, ECN: 0
DSCP: (000000..) Differentiated services codepoint 0
ECT: (......0.) ECN-Capable Transport not set
CE: (.......0) ECN-CE not set
TotalLength: 168 (0xA8)
Identification: 14025 (0x36C9)
- FragmentFlags: 16384 (0x4000)
Reserved: (0...............)
DF: (.1..............) Do not fragment
MF: (..0.............) This is the last fragment
Offset: (...0000000000000) 0
TimeToLive: 128 (0x80)
NextProtocol: TCP, 6(0x6)
Checksum: 0 (0x0)
SourceAddress: 10.44.46.101
DestinationAddress: 10.44.44.14
- Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
SrcPort: 65372
DstPort: NETBIOS Session Service(139)
SequenceNumber: 1910965363 (0x71E70473)
AcknowledgementNumber: 580319796 (0x2296FA34)
- DataOffset: 80 (0x50)
DataOffset: (0101....) 20 bytes
Reserved: (....000.)
NS: (.......0) Nonce Sum not significant
- Flags: ...AP...
CWR: (0.......) CWR not significant
ECE: (.0......) ECN-Echo not significant
Urgent: (..0.....) Not Urgent Data
Ack: (...1....) Acknowledgement field significant
Push: (....1...) Push Function
Reset: (.....0..) No Reset
Syn: (......0.) Not Synchronize sequence numbers
Fin: (.......0) Not End of data
Window: 252 (scale factor 0x8) = 64512
Checksum: 0x6F65, Disregarded
UrgentPointer: 0 (0x0)
TCPPayload: SourcePort = 65372, DestinationPort = 139
- Nbtss: SESSION MESSAGE, Length =124
PacketType: SESSION MESSAGE, 0(0x00)
- Flags: Add 0 to Length
Reserved: (0000000.)
Extension: (.......0)Add 0 to Length
Length: 124(0x7C)
- SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
Protocol: SMB
Command: Transaction 37(0x25)
- NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
Code: (................0000000000000000) (0) STATUS_SUCCESS
Facility: (...0000000000000................) FACILITY_SYSTEM
Customer: (..0.............................) NOT Customer Defined
Severity: (00..............................) STATUS_SEVERITY_SUCCESS
- SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
- Flags: 24 (0x18)
LockAndRead: (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
NoAck: (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
Reserved_bit2: (.....0..) Reserved (Must Be Zero)
CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
Canonicalized: (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
Oplock: (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
OplockNotify: (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
FromServer: (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
- Flags2: 51207 (0xC807)
KnowsLongFiles: (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
KnowsEas: (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
SmbSecuritySignature: (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
Compressed: (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
Reserved_bit5: (..........0.....) Reserved (Must Be Zero)
IsLongName: (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
Reserved_bits7_9: (......000.......) Reserved (Must Be Zero)
ReparsePath: (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
ExtendedSecurity: (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
Dfs: (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
Paging: (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
NTStatus: (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
Unicode: (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
PIDHigh: 0 (0x0)
SecuritySignature: 0x0
Unused: 0 (0x0)
TreeID: 8193 (0x2001)
ProcessID: 10092 (0x276C)
UserID: 14337 (0x3801)
MultiplexID: 320 (0x140)
- CTransaction:
WordCount: 14 (0xE)
TotalParameterCount: 32 (0x20)
TotalDataCount: 0 (0x0)
MaxParameterCount: 8 (0x8)
MaxDataCount: 4200 (0x1068)
MaxSetupCount: 0 (0x0)
Reserved: 0 (0x0)
- Flags: Do NOT disconnect TID
Disconnect: (...............0) Do NOT disconnect TID
NoResponse: (..............0.) Server response to the client
Reserved: (00000000000000..) Reserved
Timeout: 5000 milli sec(s)
Reserved2: 0 (0x0)
ParameterCount: 32 (0x20)
ParameterOffset: 92 (0x5C)
DataCount: 0 (0x0)
DataOffset: 0 (0x0)
SetupCount: 0 (0x0)
Reserved3: 0 (0x0)
ByteCount: 61 (0x3D)
- RemoteAPIBuffer:
- FileName: \PIPE\LANMAN
- Align: 1 Bytes
AlignBytes: Binary Large Object (1 Bytes)
Name: \PIPE\LANMAN
Pad1: Binary Large Object (2 Bytes)
- RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
RAPOpcode: NetServerEnum2
- ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
Param: (W) WORD (send parameter, 16 bit integer)
Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
Param: (e) Entries read (receive data, 0 bit integer)
Param: (h) WORD (receive parameter, 16 bit integer)
Param: (D) DWORD (send parameter, 32 bit integer)
Param: (z) ASCIIZ (send parameter, 8 bit integer)
Param: ASCII NUL (string terminator)
- DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
- Datum: (B) BYTE[16] (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Digit: 1
Digit: 6
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (D) DWORD (receive data, 32 bit integer)
Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
Datum: ASCII NUL (string terminator)
- NetServerEnum2: SV_TYPE_ALL: All in NSNET
InfoLevel: (1) SERVER_INFO_1
ReceiveBufferSize: 4200 (0x1068)
- ServerType: SV_TYPE_ALL: All
Workstation: (...............................1) All workstations
Server: (..............................1.) All computers with the server service running
Sqlserver: (.............................1..) All running Microsoft SQL Server
DomainCtrl: (............................1...) All primary domain controllers
DomainBakctrl: (...........................1....) All backup domain controllers
TimeSource: (..........................1.....) All Time servers
AFP: (.........................1......) All Apple File Protocol servers
Novell: (........................1.......) All Novell servers
DomainMember: (.......................1........) All LAN Manager 2.x domain members
PrintqServer: (......................1.........) All print servers
DialinServer: (.....................1..........) All dial-in servers
ServerUnix: (....................1...........) All Unix/Xenix servers
NT: (...................1............) All Windows NT workstations or servers
WFW: (..................1.............) All Windows for Workgroups servers
ServerMFPN: (.................1..............) All Microsoft File and Print for NetWare servers
ServerNT: (................1...............) All non-domain controller servers
PotentialBrowser: (...............1................) All servers that can run the browser service
BackupBrowser: (..............1.................) All backup browsers
MasterBrowser: (.............1..................) All master browsers
DomainMaster: (............1...................) All domain master browsers
Reserved1: (..........11....................)
Windows: (.........1......................) All Windows 95 or later
DFS: (........1.......................) All DFS root servers
ClusterNT: (.......1........................) All NT Clusters
Terminalserver: (......1.........................) All Terminal Servers
ClusterVSNT: (.....1..........................) All NT Cluster Virtual Server Names
DCE: (....1...........................) AllIBM DSS (Directory & Security Services)
Reserved2: (...1............................)
AlternateXport: (..1.............................) Return list for alternate transport
LocalListOnly: (.1..............................) Return local list only
DomainEnum: (1...............................) Enumerate primary domain
Domain: NSNET
Then the reply;
Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
+ Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
+ Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
+ Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
+ Nbtss: SESSION MESSAGE, Length =2013
+ SMB: R; Transaction, Remote Administration Protocol
- RAPResponse: NetServerEnum2 Response, Count = 31
Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
Converter: 2251 (0x8CB)
- NetServerEnum2: Count = 31
EntriesReturned: 31 (0x1F)
EntriesAvailable: 31 (0x1F)
+ NetServerInfo1: APOLLO
+ NetServerInfo1: ARTEMIS
+ NetServerInfo1: ASKLEPIOS
+ NetServerInfo1: CASTOR
+ NetServerInfo1: DCC4503-131L
+ NetServerInfo1: DCC4503-155L
+ NetServerInfo1: DCC4503-157L
+ NetServerInfo1: DCC4503-161L
+ NetServerInfo1: DCC4503-171L
+ NetServerInfo1: DCC4503-172L
+ NetServerInfo1: DCC4503-175L
+ NetServerInfo1: DCC4503-177L
+ NetServerInfo1: DCC4503-183L
+ NetServerInfo1: DCC4503-184L
+ NetServerInfo1: DCC4503-185L
+ NetServerInfo1: DCC4503-188L
+ NetServerInfo1: DCC4503-196L
+ NetServerInfo1: DCC4503-197L
+ NetServerInfo1: DCC4503-199L
+ NetServerInfo1: DCC4503-202L
+ NetServerInfo1: DCC4503-203L
+ NetServerInfo1: DCC4503-205L
+ NetServerInfo1: DCC4503-210L
+ NetServerInfo1: DCC4503-213L
+ NetServerInfo1: DCC4503-219L
+ NetServerInfo1: DCC4503-220L
+ NetServerInfo1: DCC4503-228L
+ NetServerInfo1: DCC4503-233L
+ NetServerInfo1: DCC4503-234L
+ NetServerInfo1: DCC4503-236L
+ NetServerInfo1: DCC4503-241L
StringData: Binary Large Object (586 Bytes) -
Remote not working properly with one TV
For one of my TV's the remote is not working as it should. Just today - the operating distance from my couch, which is about 8 ft got reduced to about 3 ft. I don't have this problem with my TV in the bed room. I changed the batteries and they are fully charged. Tried calling Verizon - don't get to speak to a human anymore. They prompt me to buy a new remote. Can someone help me.
It's been about an hour since I posted my issue and got your reply. All of sudden everything started working again. All we did was turned off and turned on everythng. Thank you for your help. I never got to try your solution - but will keep that as a possible solution in case it happens again.
-
Lightning to 30-pin Adapter not work properly with iPhone 5s
Lightning to 30-pin Adapter (0.2 m) with iPhone 5s working good with power adapter and 30-pin cable, but how iPhone at 100% power, I see message "This accessories is not working correctly".
But with iPad mini 1 everything is OK.Bottom line, the iPhone case restricted insertion of the 8 pin adapter into the IPhone. Slide in cases with open bottoms have no problems but wrap around cases can restrict flush insertion due to insufficient access to the recepticle in the iPhone.
-
New Macbook charger not working properly on one side
Hello,
I've recently sent my macbook in to get the exterior fixed. Upon its first charge I noticed the light on the Apple 60w Magsafe power Adapter never turned on, (indicating me that it is in fact charging)
This problem only occurs if its charging with the wire facing away from you, not towards you (because you can attach the charger two ways) It works if its charging with the wire facing towards me, but this usually is a very awkward and uncomfortable way to charge my macbook. I have two identical chargers and it does the same for both.
Is there anyway to help this problem? Or does my charger need replacing?Hello,
I've recently sent my macbook in to get the exterior fixed. Upon its first charge I noticed the light on the Apple 60w Magsafe power Adapter never turned on, (indicating me that it is in fact charging)
This problem only occurs if its charging with the wire facing away from you, not towards you (because you can attach the charger two ways) It works if its charging with the wire facing towards me, but this usually is a very awkward and uncomfortable way to charge my macbook. I have two identical chargers and it does the same for both.
Is there anyway to help this problem? Or does my charger need replacing? -
G Mail will not work properly everything goes into the trash
Just got an I Pad air my first I Pad. I can't not get my gmail to work properly. Everything goes in the trash. Please Help
Hi,
In the Applications/Utilities folder is the Console App.
Launch this.
Try launching one of these two app again and tell us what error messages seem to appear.
(you may have to anonymise the info)
9:48 pm Sunday; March 16, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
My iPod does not work properly when plugged into the computer. How to fix?
I have a 4th generation 40 gigabyte iPod, non-color.
Today, I plugged it into my computer to update my playlists.
My iTunes and Windows were lagged down. Eventually, when things caught up, my iTunes didn't show my iPod as being connected. I looked in My Computer, and it didn't say iPod -- it said "Removable Disk". I couldn't disconnect my iPod via Windows, even using the Safely Remove Hardware didn't work.
After looking around here and trying things like Disk Mode and Resetting the iPod, nothing worked. I can't get the iPod to work with the iPod Updater so I can try restoring it.
I dunno really what to do. If it's a hardware problem, then I'm not going to bother to get it repaired, since the music that's currently on it plays perfectly fine still.
I just dunno what else to try.you basically are stuck. apple won't do crap for you. i went to the apple store today because my second ipod crashed (the first one they replaced) and they won't do anything for me and told me i had to buy a new one (2 in 1 1/2 years is what happened) so they wanted me to buy a third one when their product obviously *****. and the manager even basically admitted that the ipod that they claim is durable and relible isn't. that people go through 3-4 a year. the supposed "apple genius" told me to send it out to a third party repair. he wouldn't even look at it and lectured me for not getting the extended warranty. if you look at the website below and read you'll find that a lot of people got screwed over like me with the extended warranty;
http://www.consumeraffairs.com/computers/apple_ipod.html
put it this way i won't go back to that apple store again or purchase another ipod. ill keep my piece of none working crap -
SMTP Adapter: Not sending email for one of the applications
I have a weird problem. I have three applications that need to send emails. Two of them are sending emails but the third one is not. Practically everything in the third is a copy-paste from the second application. Uses the same handler and so forth. In reality
there is no reason there should be any failure.
How can I track if my email request was sent to the smtp server in the first place and also why this one is failing? Further, anything on the smtp server that could help tracing this message. May be it is failing there?The SMTP Adapter don't just "through away" messages. If your Tracked Service Instances shows that a message was sent through the Port, I am pretty sure that a mail was indeed sent.
-Are you using Static- or Dynamic Port?
Can you try to set the Send Port in "Stopped" state, and then send a message to it. Examine the message suspended in BizTalk, and if everything looks ok, then start the Port again and check that the message has disappeared from both suspended and running
instances in the Group Hub.
If so, quickly check the mail box, make sure that no spam-filters etc. are messing up your test.
Morten la Cour
Maybe you are looking for
-
EPMA 11.1.2.1 : A non-desired dimension is created in Planning with EPMA
When a new Hyperion Planning application is deployed with EPMA 11.1.2.1, a 'Cut-off' dimension is created in the newly deployed applications. 'Cut-Off' was a local dimension for an application deployed from EPMA. But we do not know how this dimension
-
Printing witholding tax in AP invoice
In the layout to print the Ap invoice i need to print the witholding tax. however the invoice can be in local currency or foreign currency. i can not find the variable to use which will work in both case. Either I get the local currency or the foreig
-
I currently use on average 13GB a month through an iPad, smart tv, two iPhones and the kids watching YouTube- light to medium usage? I currently have an average download speed if 11MB/S. Will the increased Infinity speeds have an effect on my monthly
-
Where can I download an older AIR installation for linux?
I've tried every place that "says" they have a Debian package for AIR. Even though the discontinued it, why isn't it archived on the website somewhere? Unless something about how the program operates makes Linux exploitable..... THAT IS SPECULATION.
-
what does this last statement mean? it is as though the query runs just like without any hints. oracle doc: Using Parallel Execution Examples of Distributed Transaction Parallelization This section contains several examples of distributed transactio