Pre-Printing

Dear All,
I have developed a report with pre-printing continous report output in apps.
The printer style is 15*12.
in the layout :
Header section :
Width : 15.2023
Height :12
Charter Mode
Report Width :146
Report Height :72
Main section :
Width : 15.2023
Height :12
Charter Mode
Report Width :146
Report Height :72
Taril section :
Width : 15.2023
Height :12
Charter Mode
Report Width :146
Report Height :72
IN the report builder itis working fine.for exp : 2invoices menas itis coming tin 2 different pages.
In Apps itis not printing in 2 different pages.1st invoices is printing and at the bottom 2nd invoice will start.but i have given page breakup.even thought itis not working.Can any one help in this issue.
PLs bit urget.
Regards
Siva

Hye,
This type of problem I faced in Cheque printing on Preprinted , even placing page break it is not working in APPS, bcs when we run the report in APPS it uses it's printer layout setup from UNIX commands one, secondly you set your one page with maximum size and after that place any character co finish the page completely.
Thanks
Shishu Paul

Similar Messages

Print layout in case of pre printed continous stationery

Dear Experts,
I have one query related to print layout designing.The issue is the PLD is set for an Invoice in the pre printed stationery & the printer out is take using continuous stationery the problem which i have faced is 1 page is printed properly but for 2nd page the print again starts from top so again the user have to do manual setting & print the 2nd page.
Thanks & Regards-
Manmath Das.

Dear Manmath Das,
It is too difficult to handle the print on pre printed continuous stationery by PLD. PLD is a very basic tool. You may only get it work by endless try and error to see.
Thanks,
Gordon

Printing on Pre-printed stationary from XML Publisher

Hi,
I have a requirement where a report is to be printed on pre-printed stationary from XML Publisher. The stationary would be NCR paper and has to be printed from a dot matrix printer.
My first question is whether report generated from XMLP can be printed thro'
dot matrix printer, coz as far as i know it takes only character format .If yes, do we need any special handling?
If anybody has any experience related to this problem, please let me know the approach.
Can mail me at [email protected]
Regards,
Satrajit

Hi Milind
I see what you've got.
It is not uncommon to use character mode output for pre-printed stationery.
This would appear as draft output from a Dot Matrix printer. I hope you understand what I mean here. It is somthing like printing using fixed width font.
Design and run the report with MODE=CHARACTER from the command line.
You need to figure out and design the layout in such a way that you are printing in the empty spaces provided in the pre-printed stationery. This is usually by trial and error method. You may probably blow several pre-printed stationery sheets before you get it right.
Regards
Sripathy

How do I create a form field ONLY template in Acrobat 9 Pro that will let the user enter and print only the form field data on a pre-printed form?

This template will be used to type in information that will then be printed on an agency's official, barcoded form loaded in a printer (instead of blank paper.) Only the user-entered info should print on the pre-printed form. Users will use Adobe Reader to complete their templates; they do not have Acrobat. Thank you!

Use the template as non-printable background and add the form fields.

Purchase Order Printing on Pre-printed stationary

I feel very difficult to print my purchase order
on our pre printed stationary using 6i report.
Is Text_IO utility help me .. or any other tool is
there to print critical report on preprinted stationay.
Presently, I am printing my PO by ORACLE RPT tool. old version.
Pleae Help Me ..
Regards
Milind Nikumbh
KSPL
Pune

Hi Milind
I see what you've got.
It is not uncommon to use character mode output for pre-printed stationery.
This would appear as draft output from a Dot Matrix printer. I hope you understand what I mean here. It is somthing like printing using fixed width font.
Design and run the report with MODE=CHARACTER from the command line.
You need to figure out and design the layout in such a way that you are printing in the empty spaces provided in the pre-printed stationery. This is usually by trial and error method. You may probably blow several pre-printed stationery sheets before you get it right.
Regards
Sripathy

Printing a PDF file over pre-printed template

I would like to be able to print a PDF file (file A) over the top of another PDF file (file B ). For example, file A could be a letter that needs to be sent out and file B could be the company letterhead. The resulting file would be the letter on company letterhead.
I need to be able to do this because I am printing from an application that allows limited customization of the output format. Having the ability to print one file over another would enable me to create a "pre-printed template" in an application that has more flexibility. I could then add the data from the first application over the top of the "pre-printed template."
I am using Acrobat Professional 7.0.9 on a Windows XP Professional system. If necessary I can upgrade to a more recent version of Acrobat.
Thanks for your help

I would like to do this all electronically. I don't produce a hard copy at any time but rather create the PDF and then email the file to the recipient.

Restricting no.of rows in a pre-printed layout without disturbing th layout

Hi,
We have a requirement in a pre-printed format template. It has sections like 'header/detail/footer' section.
Let say in detail section to show item details, In pre-printed layout only 13records can be shown at a time. Let say I have 50+ items want to display in detail section without distrubing the pre-printed layout.
Gone through so many forum-posting and didn't find any correct answer.
Tried some of the tips like : <?if:position() mod 13 =0?> <xsl:attribute name="break-before">page</xsl:attribute> <?end if?> doesn't work it distrubs the layout.
I see some of the vetri replies so sending template/xml to vetri's e-mail id as well. Thanks in advance for helping on this.
Thanks
Velu

Some approaches:
a) put everythign besides the table in header/footer...
b) Repeat the whole page - or repeating part using a group:
<?for-each-group:floor(position() div 13)?>
Print table header etc...
In table iterate over
<?for-each:current-group()?>
table row
<?end for-each-group?>
table footer etc..
<?end for-each-group?>
hope either helps,
Klaus

Cheque Pre printed stationary

Dear All,
I am in the process of developing a Layout for the Cheque Pre printed stationary. I am printing the cheque from the T Code : FBZ5.
Here when i try to call the Layout and print the cheque it prints only one document that too the last one where as there are more than 5 documents. I can see these 5 documents in the Payment Advice.
I saw that the New layout is calling the Std Program : Rffous_c.
Can any body tell how to Go abt it...
with rgds
Ranjith Singh

Dear Sailatha Nagasamudram,
I am printing the Cheques using the Tcode FBZ5.
Now we have got the Pre Printed sationary from the Bank amd for that i have created a Layout.
When we print the Cheque along with a Payment Advice gets printed. I am trying to print all the Payment transactions which are printing on the preprinted stationary. But that is not happening...
This is the scenario.
can u help me out in this....
Rgds
Ranjith Singh

Reports6i:Developing reports of different size(Pre-Printed Stationary)

I am using Reports 6i. I want to generate reports of page size 3.5" (height), 11.5"(width). I modified the layout sections width and height properties.
I am printing reports on continuous Pre-printed stationary with dot matrix printer.
After printing first record, the continuous stationary is skipping 3 records space(It is taking printer portrait height 11" and width 8.5" setting) and after that the next record is printing.
What are the settings to be modify to avoide the skipping of 3 records space in the stationary.
Looking for your help/suggestions
Regards
Krishna Reddy M
[email protected]

Hi Krishna!
I suppose that you have modified properties of the "Main Section" of the "Layout Model" in Object Navigator.
Several things can be checked:
1. In the layout editor click "Edit Margin" button and make sure that the outer black frame (your actual page to be prited) is of the size you want.
2. If you have a repeating frame check that "Maximum records per page", "Vert.space between frames", "Page break after", and some others are set properly.
3. Another approach is to generate your report into pdf file and print it using OS means.
Regards,
Andrew Velitchko
BrainBench MVP for Developer/2000
http://www.brainbench.com

Pre Printed Invoice

Hello,
We are currently in the analysis phase to the implementation of SAP ECC 6.0 Ehp3 for a society in Ecuador, and I know that this situation happens in Venezuela too. The laws require that the invoices and delivery notes must be pre-printed by a printer approved by the Internal Revenue Service, giving them the document number for each one.
How can we do, with the invoice number, when the items have sold cover more than one sheet?
Can we use the following pre-numbered invoice to continue printing?
What is the reference number of the invoice, the first number or the second one?
Thanks in advance,
Johnattan Company
SAP SD Consultant

Hi
I understand all paper sheets are provided by an Authority andonly these can be used with the approved printers.
I am confused about one thing:
- I can imagine how much every single company is wasting of paper, what about these sheets that are wasted because of paper jams in the printer for example? Do you report on these?
As for the problem printing, every 15 items coming on 1 sheet, in my opinion you don't have to make 4 sales orders, neither you need to split the order into smaller deliveries 15 items max. What I suggest is just redesign the output proces of the delivery ( same for billing ) is that you
1. number your pages as 1 of 4, 2 of 4, ...
2. repeat the header details of your document on each sheet like: Date, document number, customer, ...
3. the items number will continue as normal on each sheet
I think (my opinion) this way, whatever the paper sheet number is, it always links back to the document stored in SAP.
regards
Sidi

Unable to Align the fields according to the Pre-Printed Cheque format

Hi,
I am having a requirement where I need to align the report output according to the Pr-printed Chekc Format which is loaded in the printer.
In detail we have a pre-printed format of the cheque which will be loaded into the printer which includes the logo and the amount fields with the symbol of currency,date etc.
I need to print the output which is runned by formating the payment batch.I am getting the output printed but not in the exact palces where I need.I tried to modify the report fields by increasing the length and width of the main section but of no use.Can any one help me out at the earliest.
I am getting the output either out of the symbol of currency and even the date as well.
Thanks for your help in advance.
With Regards,
Sunil.

Can you explain briefly the below point which you have mentioned.
"Also set the increase the size of fields upon the size of pre-printed area and set the horizontal Elasticity to FIXED. Then align and print."I meant that increase the size of fields according to the size of pre-printed document and set the horizontal elasticity to FIXED so it will not go out from the desired space.
Well, this is what i said you will have to set the alignment and will have to check by printing again. There is no specified format of pre-printed document type reports.
-Ammad

Printing on a pre printed stationery

Hi,
I am trying to print data on a pre printed stationery. On one physical page two copies (1+1) of report is printed horizontally side by side. On each logical page there is repeating frame that displays 4 rows of data across the page.Now as soon as the number of records become > 4, the 5 th record instead of moving to next physical page, overlaps and sets on the logical page on the same physical. what could be done such that the 5 th record and onwards prints on the next physical page alongwith the copy of the 5 th record also displayed on the next logical page.
thanks
Prashant Mishra

Not sure if I fully understand your description, you might like to give an example of what data you have and what you want on each page.
However, for pre-printed forms, you typically use a fixed size frame to define the area that a repeating frame can print into. Alternatively you can use the "max records per page" property if you can guarantee that each record will only take up a specific amount of sapce.
Where physical vs. logical pages are concerned. You can only have multiple physical pages making up a single logical page. In your case, you seem to want to have multiple logical pages for each physical page. Since Reports will insert page breaks after each logical page, it will be difficult to do this.
If you need to get two sets of records onto a single physical page use an "across->down" repeating frame for a single repeating frame that encompasses one half of your physical (and logical) page.

Pls Help! Adobe reader 9.0+ generated barcodes on pre-print is problem

hi to all,
I have a really strange problem and would like to share with you.
Im generating the barcodes on the pre-print event, using LiveCycle Designer 8.0.
Everything is ok when im trying to generate 2/3/4 barcodes in my form.
The PROBLEM is if I decide to add more than 5 barcodes in my form and try to print it.
Then - when I decide to print the form and to fill the information in my barcodes - the Acrobat Reader is just closed.
No error alert..just closed. When i debugged the problem I saw that generating of barcodes is starting, but if there are more than 5 barcodes,
the adobe reader closed before all barcodes to been generating.
I do think about no enough memory, or something like that..but have no idea really what’s that.
Do u have any idea what’s that problem..
thanks in advance for yr time
Regards

Try and print the PDF as an image.
Also when you send this to someone else are hey able to print without an issue?
Have you've tried another printer?

Pre-printed forms on IBM 5577 dot printer

Dear all,
I was wondering if there is any SAP tool in order to use pre-printed forms (with specific layout) on IBM 5577 dot printer which would allow to speciy a pre-defined layout.
Or do I have to define for each field the position on the pre-printed form thanks to SAPscript editor?
Regards.

HI Cany,
There is no such tool to identify the problem .In scripts and smartforms we have to define the layout pertaining to printer and its configuration settings.once the layout is defined and the printer is defined during the printing the printing begins automatically.in ur case u r talking about pre printed forms like application forms like cases, for this we have to know the length of the form initially and take care to identify the length of the field and also position.Hope u understand this.

Color space-creating a book in My publisher-.when I look at the share book pre print the colors are all dulled out. I work in pro photo rgb in LR and PS -.My Pub is sRGB-.where is the problem?

Color space…creating a book in My publisher….when I look at the share book pre print the colors are all dulled out. I work in pro photo rgb in LR and PS ….My Pub is sRGB….where is the problem?

I finally got to my references. This had to do with "soft proofing" on screen in Photoshop.
So this may not help you at all. Re: Strange sRGB soft-proofing behavior So go ahead and leave that setting at Basic.
However there is a Color Management forum that you also go to and see if anyone has answers for your particular problem.
Here is the link: Color management
I hope they can help you out.
Gene

Pre-Printing

Similar Messages

Maybe you are looking for