Pre-requisite checker script for EBS R12 and R12.1

hi
is it possible to make a pre-requisite checker script (in perl or shell) for EBS R12 and R12.1 in RHEL5 or sun OS??
can anyone help / guide me to do so??
rgrds

I don't know about EBS R12, but apparently the Oracle Universal Installer can use options to just run the prerequisite checks without having to install the product.
E.g. /runInstaller -prereqChecker or -executeSysPrereqs
There is also a specific OTN forum available for installing E-Business suite:
LCM: 11i Install/Upgrade

Similar Messages

Pre-requisite check for client deletion.

Dear Experts,
We need to delete a client(Customizing client) from our Production system, this client is an additional one apart from our Productive client.
Could anybody please enumerate the pre-requisite checks necessary to carry out before going ahead with deleting the client using SCC5. Any Rfc's to be taken care off, logical systems etc.
Thanks in advance

Hi,
In addition to what Sunny said, Please check the below links as well in case if you would have not gone through them:.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCTS/BCCTS.pdf
http://help.sap.com/saphelp_46c/helpdata/en/2e/d9530294f911d283d40000e829fbbd/content.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCRRR/BCRRRSAA.pdf
Thanks

All 11g pre-requisites check failed on solaris 10

During 11g R2 (64 bit) installation on Solaris 10 64 bit, all pre-requisites checks were failed.
Like the first one given below:
=======================
Physical Memory - This is a prerequisite condition to test whether the system has at least 1GB (1048576.0KB) of total physical memory.
Expected Value : n/a
Actual Value : n/a
List of errors: -
PRVF-7531 : Physical memory check cannot be performed on node "sol11oracle-vm" -
Cause: Could not perform check of physical memory on the node indicated. -
Action: Ensure ability to access the node specified and view memory information.
=======================
It seems that oracle installer not able to resolve the name "sol11oracle-vm".
Please suggest.

Hi, know that its an old thread but anyway.
Check metalink for *11GR2 INSTALL ON SOLARIS FAILS MANY PREREQUISITE CHECKS [ID 989727.1]*.
Oracle 11gR2 software is NOT certified for:
a.) Solaris 10 “less than update 6” with the right patches.
b.) Solaris 10 “less than update 6” with a Solaris patch bundle.
c.) Solaris 10 “less than update 6” with a Solaris release update
It is only certified for a base install image of Solaris 10 update 6 or greater.

Pre-Requisite Check SQL Server 2012 SP2 TCP Port Enabled Error

When doing the pre-requisite check to install SCCM (CAS) using an instance of SQL Server 2012 SP2, you get the following error even though SQL Server TCP port has been enabled, set to static port 4022 on the IP addresses in use in SQL Server Configuration
Manager under Protocols for <SQLInstanceName>: configuration manager primary site and central administration site require sql server tcp enables and set to static port
To resolve this issue, make sure "4022" is also set in the IPAll node in SQL Server Configuration Manager under Protocols for <SQLInstanceName> then restart the SQL Service and re-run the pre-requisite check and you should be good to go.
To avoid SCCM SQL-related install failure, keep in mind that SCCM SQL Service Broker (SSB) (used to replicate data between database sites) is set to port 4022 by default. This is different from and cannot be same as the tcp static port set in SQL Server
Configuration Manager under Protocols for <SQLInstanceName>. For example SSB can use its default tcp port 4022 while a static tcp port of 4023 can be set in SQL Server Configuration Manager under Protocols for <SQLInstanceName> or vice-versa. The
SCCM SSB port number can be adjusted during SCCM installation on the Database Information page. My take it so change SSB port to 4023 and leave SQL default port at 4022 since SQL serves potentially many apps while SSB is used within/by SCCM.
If you are getting errors relating to SQL Server service running accounts, SQL Server Collation, and/or SQL Server sysadmin rights while attempting to install a primary site, unselect the SCCM installation option to install default settings at the beginning
of the install process.
Also, ensure to install important updates and restart the server.

Thank you for sharing.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Backup strategy for ebs R12?

Hi,
I have a couple of questions regarding to backup strategy for ebs R12.
Let's say that we have one application server and one database server running, and we would like to have a backup periodically for both servers.
This means that we want to have the exactly same backup of configurations and other files for the application server and the database server in case of any fatal crashes in the servers.
I went through some discussion threads and it seems common way is to use RMAN for the data of database and file system copy for application and database servers. But, I would like to know what's the best way or recommended way for the backup strategy for data and server files of Oracle e-business suite.
Do you guys have any suggestion for this?
Thanks in advance.
Cheers,
SH

Hi SH;
I suggest check first our previous discussion
backup and recovery startegy for EBS
Re: Backup System
Backup Policy for EBS can
If you make search you can find many other thread which is mention same question
For your issue basicly what we do
1. For our prod db, if possible we take weekly cold backup(sunday) and take rman backup also daily(full backup, but it depends system you can prefer to take incremental)
2. For our system we take file system backup weekly(OS base)
3. For application we take backup every sunday(for some system 15 days or 30 days period). The most important point here if your system prod, and if you need to apply patch to your system you need to have valid backup and also need backup for after patching
One other important issue is we run preclone sh before take backup for apps and db tier
Regard
Helios

10gR2 Install Issue: "No pre-requisite checks found in oraparam.ini"

Hello there
I have recently created a virtual machine under VMWare 5 with a base Windows 2000 build on it.
When I try and load the OUI for the 10gR2 install, the command box just tells:
"No pre-requisite checks found in oraparam.ini"
The OUI then proceeds to install the database.
Why am I getting this warnig? The reason I ask is that I can't install the Companion CD becasue of this. The universal installer does not work for CD2!!!
Any help much appreciated
Duncan

"No pre-requisite checks found in oraparam.ini"That is normal. For the operating system you are installing it on, there are no predefined pre-requisite steps that installer needs to verify (like libraries required, versions of components, software tools required etc).

Pre-requisite packages required for Oracle R11i

Hi Gurus,
I am new to DBA.I am working with oracle 11i cloning.In that task is to pre-clone from source system(os:Red Hat-4.0) and do post clone in target system in which I installed new os(os:Red Hat-4.0).
Here I need your help.What are all the pre-requisite packages required for Oracle R11i before configuring the Target System and how to apply the pre-requisite packages.
Could you please help me.
Thanks
Vinoth

Hi;
Here I need your help.What are all the pre-requisite packages required for Oracle R11i before configuring the Target System and how to apply the pre-requisite packages. Imagine you are making new installation on your target server. So you need to check all pre-req which is mention in below notes. You need to have all rmp hosts file edit and some other steps.
Please see:
Subject: Recommendations to Install Oracle Applications 11i Doc ID: 294932.1
Oracle Applications 11.5.10 - Installation Update Notes for Linux x86, Solaris SPARC, MS Windows, HP-UX PA-RISC, HP-Tru64, IBM AIX - B13590-01 [ID 287453.1]
Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1]
PS: I suggest also see my blog http://heliosguneserol.wordpress.com/2010/05/31/cloning-oracle-applications-release-11-and-12/
Regard
Helios

BI applications for EBS R12 release in OBIA 7963 release

Hi all,
Can anybody list the BI applications for EBS R12 release which supported in OBIA 7.9.6.3?
Thanks
Ram

Are you referring to the EBS functional modules? BI Apps has a numbe of product families (Financial Analytics, HR Analytics, CRM Analytics..etc) that can source from EBS as well as other ERP systems (PeopleSoft, Siebel, JDEdwards..etc). If you are looking for the functional areas, I would suggest asking your Oracle rep for the "Product Guides" for the package you need (e.g Financial Analytics, HR Analytics..etc). Also there is a "Content Guide" you can find on metalink that lists the OOTB reports, dashboards, and Metadata content (RPD attributes).
Here is the list of DAC subject areas under the vanilla EBS container..it may help for now until you have the other docs:
Employee Expenses
Enterprise Sales - Backlogs
Enterprise Sales - Booking Lines & Order Lines
Enterprise Sales - Booking Lines & Schedule Lines
Enterprise Sales - Customer Status History
Enterprise Sales - Cycle Lines
Enterprise Sales - Invoice Lines
Enterprise Sales - Order Lines
Enterprise Sales - Pick Lines
Enterprise Sales - Schedule Lines
Financials - Budget
Financials - Cost of Goods Sold
Financials - General Ledger
Financials - General Ledger - US Federal
Financials - Group Account Number Clean Up
Financials - Payables
Financials - Receivables
Financials - Revenue
HR - Absence Event
HR - Flex Prereq
HR - Generate Flexfield Data
HR - Learning Management
HR - Payroll
HR - Recruitment
HR - Workforce
Projects
Projects - Finance Integration
Supply Chain - AP Invoices
Supply Chain - BOM Items
Supply Chain - Inventory Balance
Supply Chain - Inventory Transactions
Supply Chain - Purchase Cycle Lines
Supply Chain - Purchase Order
Supply Chain - Purchase Receipts
Supply Chain - Purchase Requisitions
If this was helpful please mark the response as helpful or correct.

Is there any upgrade checking script for PL upgrade

Dear Experts,
I know there are Pre-upgrade checking script to validate database integrity before an upgrade from 2005 to 2007.
However, is there any such similar scripts for an upgrade from 2007 PL12 to PL13? (Inter PL upgrade) or can I use the same script for the same purpose?
Much Thanks!
Warmest Regards,
Chinho

Hi Gordon,
Thank you for your reply. Is it true that within inter-patch upgrades, there are no database structure change?
I asked this question because sometimes I get "DB is inconsistent" error after upgrade, and I don't know why?
Much Thanks for your Advice thus far!
Warmest Regards,
Chinho

Vmware for RAC Installation for EBS R12

Hi,
I want to test installing RAC for EBS R12 on vmware. My OS is OEL 5.4
Can you help me setup vmware please? What the the pre-requisites?
Thanks a lot,
Ms K
Edited by: user_unlimited on Sep 2, 2010 12:22 AM

Hi Msk;
Is vmware for linux applicable to unix/AIX too?
Is there separate version of vmware for AIX? Can you give me links for VMware AIX please...AFAIK for No, i also find this:
http://communities.vmware.com/message/1084738 (No AIX runs on the PowerPC chip set, VMware only virtualised i386 instructions, it is virtualisation not emulation.)
You can also see details on:
http://www.vmware.com/pdf/GuestOS_guide.pdf
Regard
Helios

Failing PATH pre-requisite check installing 11g client

Greetings -
I'm trying to install the 32bit oracle 11g database client on Win 7 Professional x64. I'm stuck with this error when the installer gets to the "Perform Prerequisite Checks" step:
Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Details:
- PRVF-3919 : Failed to retrieve value of environment variable "PATH"
- Cause: Environment variable value could not be determined.
- Action: Check user equivalence and whether the user has administrative privileges on the node.
Google tells me this might be related to an excessive PATH environment variable length, so I made multiple repetitions of "clean some crap out and try to install again" with no effect. Currently it is set to:
C:\>path
PATH=C:\Windows\system32;C:\Windows;
And the installer still fails.
I've tried explicitly running the installer via "Run as Administrator" and as a regular user (who is in the Administrators group). No change either way.
Someone on my team suggested making sure the installation target path has no spaces in it. I'm keeping the default path suggested by the installer, which is
D:\app\ladams\product\11.2.0\client_1
where ladams is my Windows user name. I did some experimentation here, changing the install path to things like "D:\oracle" and that hasn't resolved the issue.
Interestingly, if I open the installer log, I can find this line in it near the top:
INFO: PATH has :==>C:\Users\ladams\AppData\Local\Temp\OraInstall2013-01-28_02-19-03PM\jdk\jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;;;.
So it can apparently read the path at some point before the pre-requisite check, although it seems to be doubling up the contents for some reason...
Later on in the log file, I see this:
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
Is there some way to work around this issue, or just skip the prerequisites check entirely? I found something on a blog via google about being able to pass a "-ignoreSysPrereqs" switch to the installer to bypass the check. When I tried that, the installer still performed it's checks, and failed with the same error, so apparently that was bad info...
Any help would be appreciated.

Thanks for the reply.
I did indeed take a look at the client installation instructions here: http://docs.oracle.com/cd/E11882_01/install.112/e24282/toc.htm#BABGCIFF
However, it appears to be out of date, or at least not applicable to my problem. Step 10 refers to an Ignore All button:
"Note: Oracle recommends that you use caution in checking the Ignore All option. If you check this option, then Oracle Universal Installer may not confirm that your system is able to install Oracle Database successfully."
I don't have an ignore all button. At least if there is, it's cleverly disguised. The only option I have after the check fails is "Cancel."
Is there another section of the fine manual I should take a look at?
Edited by: 984635 on Jan 28, 2013 6:09 PM
Edited by: 984635 on Jan 28, 2013 6:17 PM

Failing to assemble Downloaded Pre-built Virtual Machine for SOA Suite and BPM Suite 11g

Hello,
I checked the download checksum of the files downloaded for Pre-built Virtual Machine for SOA Suite and BPM Suite 11g ( Pre-built Virtual Machine for SOA Suite and BPM Suite 11g ) and they all match checksums.
however, when I try to assemble them with 7zip, I get a corrupt error message. I have tried downloading with Chrome and Internet Explorer. I have also tried assembling the 7zip files different ways.
Is there anything else I should try?
Running on Windows 7, 64 bit machine. (with lots of disk space).
Is there any other way to get the files?
thank you.

thanks for the response
I guess I will have to do that as well.
However, it defeats the speed with which can ramp up with the toolset; thus slowing my time I can allocate to learning it...

Hi All,Pre-requisite of using FOR ALL ENTRIES

Hi All,
         What are the Pre-requisite of using FOR ALL ENTRIES in the select statement .pls its Urgent .
thanks&regards.
Bharat

hi,
For using for all entries in below statement for all entries in itab_mara it will retrieve record corresponding fields of table itab_marc.
In this case if we have duplicate records in mara .For that also it will retrieve the value in itab_marc.
select matnr erdat from table itab_mara where matnr in s_matnr.
if not itab_mara is initial.
select matnr werks from table itab_marc for all entries of table itab_mara
                                                      where werks in s_werks and
                                                                matnr in s_matnr.
Reward with points if helpful.

Hardware requirement for EBS R12 (12.1.3)

Hi,
Can any one please let me know what is the hardware requirement for EBS R12 (12.1.3) for 100 users and which going into be TEST instance.
Thanks in advance.
Thanks,
Venkat

Can any one please let me know what is the hardware requirement for EBS R12 (12.1.3) for 100 users and which going into be TEST instance.
Thanks in advance.This topic was discussed many times in the forum before, please see old threads for details.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Recommendation for setting up Data Guard for EBS R12 12.1.3

Hello Experts,
I would like to get some experts opinion and recommendation on setting up Data GUARD for EBS R12.1.3 running on Linux based systems.
Firstly I would wanna let you all know that I am just geek in this subject matter so do excuse me for any mistakes.
While we are planning on setting up Data Gurad fro R12 what are the best practices to consider ?.
We have 2 node rac enabled database and would wanna have non-rac based physical standby, based on this I believe that having db tier on remote or standby site is enough ?
if db node is enough for standby location what are things to be done when a fail over / switch over / role transitioned to standby for the app node from primary site to point db on the
standby location or do we have to have both apps and db tier @ stand by location
--However having a apps tier/node at standby will be of no use as we are planing to run db on mounstate meaning not a active data guard setup.
Please do reply with your recommendation/suggestions/pointers
Thanks in Advance.

Service Provider Access resulted in exception 'oracle.apps.fnd.soa.util.SOAException: SystemError: Error while sending message to server. http://ec2-107-22-78-224.compute-1.amazonaws.com:8000/webservices/SOAProvider/EbizAuth?Generate=1132&soa_ticket=Tu2z7GYoWPwq-VdgimKRFg..' when attempting to perform 'GENERATE'. Please view Service Provider logs for more details
Can you find any details about the error in the log?
I have looked at the following Note as well:
Error using the Generate WSDL Button in Oracle E-Business Suite Integrated Soa Gateway Release 12.1.1 [ID 1090946.1]Did the doc help?
Any one know what may be causing this issue? Do we have to do additional setup for SOA gateway after the standard install of the OVM? I tried to follow the steps in the note above but I do not see any entry for "<jdbc_url oa_var="s_apps_jdbc_connect_descriptor"/>" in the file data-sources.xml.
Anyone have any ideas?Have you reviewed these docs?
Oracle E-Business Suite Integrated SOA Gateway Troubleshooting Guide, Release 12 [ID 726414.1]
Oracle E-Business Suite Integrated SOA Gateway 12.1.1 Consolidated One-Off [ID 815196.1]
Thanks,
Hussein

Pre-requisite checker script for EBS R12 and R12.1

Similar Messages

Maybe you are looking for