Pre-Requisite for SAP BPC certification

Dear Gurus,
Hope you all are good. I am an ABAPER. I want to do SAP BPC certification. Can somebody tell what kind of functional and technical knowledge is required for this certification or to work in BPC. Some told me you need a strong FI/CO knowledge for tis certification some say you need BW technical knowledge for this. I will be highly appreciatibe if someone tells me the pre-requisites or basics in percentage. Can ABAPER moves toward BPC?
My second question is what is the job demand for SAP BPC?
Thanks in advance.
Regards

Saida,
Where did you get the information from that "you have to select in which version you need a certification, there may be 2 seperate test for those two" ???
Look at the link below for SAP BPC Certification C_EPMBPC_10.
https://training.sap.com/shop/certification/c_epmbpc_10-sap-certified-application-associate---sap-business-planning-and-consolidation-100-g/certification-details/
It clearly states that candidate needs to have knowledge on both versions -
It validates that the Associate Consultant has a good sound knowledge and understanding of SAP Business Planning and Consolidation in SAP Business Planning and Consolidation 10.0, version for SAP NetWeaver and SAP Business Planning and Consolidation 10.0, version for the Microsoft platform.
Regards,
Ashish

Similar Messages

  • What are the pre requisites for SAP SRM7.0  DB Rrefresh?

    Hi,
    What are the pre requisites for SRM DB Rrefresh?
    Thanks

    Hello Peter,
    When it comes to DB refresh you need to know what all the client dependent data which needs to be retained.
    For example you need  RFC connections, Variants, User master etc.
    As a pre task of Database refresh you may need to export the tables which are related to this so that once the database is refreshed you need to import them.
    Ensure the proper backup of production database is available. Also check all the STMS configurations which need to be retained again.
    Make sure that you need to have enough disk space which can accommodate your production data in to the pre production system.
    These are some of the general consideration one needs to have but again it depends on the environment on which one runs SAP systems.
    Regards
    Vivek

  • Pre requisites for installing SAP Router

    Hi Friends,
    As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
    I have some questions to put forth.
    1. what are the pre requisites for SAP Router
    2. Do we require Public IP and what would be the use of this ip
    3. how to configure the SAP Router
    4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
    Regards
    Aayush

    Installing the sapcrypto library and starting the SAProuter
    Contents
    u2022     Downloading necessary software components from SAP Service Marketplace
    u2022     Creating the certificate request
    u2022     Additional actions necessary before you can start saprouter
    This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
    The license for the sapcrypto library covers  saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
    Downloading necessary software components from SAP Service Marketplace
    1.     Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
    2.     Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
         a.     You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
         b.     For more information on how to obtain authorization if download is not possible see note 397175.
         c.     You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
    3.     The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
    4.     Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
    These are packed into a single CAR file sapcrypto.car
    5.     Copy the file to the direcory where the saprouter executable is located
    6.     You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
    Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
    [lib]sapcrypto.[dll|so|sl]
    sapgenpse[.exe]
    ticket
    Creating the certificate request
    1.     As user <snc>adm set the environment variables
    SECUDIR = <directory_of_saprouter>
    2.     Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
    3.     Generate the certificate Request with the command
    sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
    4.     Alternatively use the two commands:
    sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
    sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
    5.     Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
    6.     In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
    7.     With this in turn you can install the certificate in your saprouter by calling
    sapgenpse import_own_cert -c srcert -p local.pse
    8.     now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
    sapgenpse seclogin -p local.pse -O <user_for _saprouter>
    9.     This will create a file called cred_v2 in the same directory.
    For increased security please check that the file can only be accessed by the user running the SAProuter.
    Do not allow any other access (not even from the same group)!
    On UNIX this will mean permissions being set to 600 or even 400!
    On NT check that the permissions are granted only to the user the service is running as!
    1.     Check if the certificate has been imported correctly
    sapgenpse get_my_name -v -n Issuer
    The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
    2.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 4.  If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
    4.,7.,8. and 10.
    Additional actions necessary before you can start saprouter
    1.     The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
    SNC_LIB has the form
    UNIX      <path_to_libsecude>/<name_of_sapcrypto_library>
    Windows NT, Windows 2000     <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
    2.     Check if the environment of the user running saprouter contains the environment variable SNC_LIB
    UNIX     printenv
    Windows NT     System environment variable
    3.     start the saprouter with the following command line:
    saprouter -r -S <port> -K "p:<Your Distingushed Name>"
    -K tells the saprouter to start with loading the SNC library
    the corresponding file ./saprouttab should contain at least the following entries
    inbound connections MUST use SNC
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
    repeat this for the servers and port_numbers you will need to allow,
    please make sure that all explicit ports are inserted in front of a
    generic entry '*' for port_number
    outbound connections to <sapservX> will use SNC
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
    permission entries to check if connection is allowed at all
    P <IP address of a local host> <IP address of sapserv2>
    all other connections will be denied
    D  * * *
    Example
    For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
    SNC-connection from and to SAP
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
    SNC-connection from SAP to local R/3-System for Support
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
    SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
    SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
    Access from the local Network to SAPNet - R/3 Frontend (OSS)
    P <IP-addess of a local PC> 194.39.131.34 3299
    deny all other connections
    D * * *
    Lalit Kumar

  • Pre requisites for certification

    Dear All,
    I would like to attend the certification test.Plz tell me what are the pre requisites for that? I came to know that S- code is mandatory for that.Plz clear my doubts
    Vinay

    Hi,
    BRowse the website www.vue.com for more info about certification of SAP B1.
    The SAP S-ID is used to register in VUE.  Usually the S-ID consists of partner S-Id and customer S-Id.
    Rgds,

  • Pre-requisites for TBIT14 (XI) course

    Hi All.
    I am about to go for the TBIT14 (XI) course in a few days from now.
    I wished to know that is ALE/IDOC's knowledge essential for this course? I have not worked at all on ALE/IDOC, though I have a knowledge of BAPI's.
    Also, SAP says that XML and BIT100 are a pre-requisite for this course.
    I have not gone through these courses. Are they really essential?
    What all should I know before-hand so that I am not lost during the course?
    Thanks in advance.
    Regards.
    Samant

    Hi,
    If you are going for XI Developer Track (TBIT40) then your current knowledge is sufficient.
    If you have SAP(BAPI,RFC,IDOC etc) background it is an added advantage.But it is not must.
    "XML and BIT100 " courses are  not essential. But you need to identify all messages in XML format.
    If you are giving Certification then go thru following thread.
    /thread/25311 [original link is broken]
    Hope this helps,
    All the Best
    Moorthy

  • Pre-requisites for installing Oracle 10gR3 on RedHat Linux

    Hi All,
    I am installing oracle 10g Lite R3 on RH Linux AS3.0. I am trying to find out the pre-requisites for the installation. I do not find the certification matrix on metalink.
    Could someone please let me know where I can find this info?
    Thanks,
    Madhan

    http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm#CBHGJHCF
    HTH

  • What are the pre requisites for implementing ChaRM

    Hi
    We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
    Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
    Thanks & Regards
    Anand

    The listed pre-requisites for the implementation of ChaRM are;
    1.  Already completed the basic configuraiton of SAP Solution Manager
    2.  You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
    3.  you have setup business partners for the users (or at least 1)
    4.  satellite systems are at the minimum  support package level required (note 907768)
    5.  connections are available to the satelite systems
    6.  CTS+ if you wish to control non ABAP change requests through ChaRM

  • Pre-requisites for implementing WMS for an Existing Organization.

    Dear Folks,
       My client is planning to implement WMS for an Existing Organization.And this organization(warehouse) performs all the daily transactions.
    Are there any pre-requisites to be done before implementing WMS on this organization?
    Any help is  highly appreciated.
    Regards,
    Sri

    >
    venkatesan janardhanam wrote:
    > Hi Experts
    >
    > We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems. 
    >
    > I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
    >
    > Thanks in advance
    >
    > Thanks & Regards
    Hello Venkatesan,
    There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
    Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
    Regards
    Amit

  • Pre Requisites for HANA?

    HI
    May i know the pre-requisites for HANA?
    Is SAP BI/BW is required to learn HANA?

    Hi Krishna,
                   Anybody with knowledge of HANA are eligible. With BW/BI it adds to your skill set, you can understand the modeling concepts better ( any ways the database concepts will be covered here as well ).
                        One thing you have to understand is that the person with good process knowledge of subject will clear the interview.
               So I suggest you learn HANA module and know the basics of BW/BI, that should be all.

  • Pre-requisite for BCS implementaion

    Hi,
    Please guide on pre-requisite for BCS implementation. What are the settings done in ECC for BCS. Also, how can items be directly uploaded without BI help in BCS.
    Thanks

    Hi,
    Take a look at the image below.It is telling all steps need to be done in both ECC and BW side.
    http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/33/A703F210254B8884F9E1E39DB83A15/Group_Cl_image002.gif
    http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/33/A703F210254B8884F9E1E39DB83A15/content.htm
    You may also check service.sap.com/sem for details.
    Regards.

  • What are the pre-requisite for JAVA Proxy communication?

    What are the pre-requisite for JAVA Proxy communication?

    Hi,
    You can install the Java proxy runtime on the SAP J2EE Engine Release 6.40 SP5 or higher.
    The messaging system that the Java proxy runtime uses to send messages to the Integration Server must also be installed on the J2EE server.
    To send messages from a J2EE application, the application must be programmed against beans that encapsulate all details about the Java runtime. The following classes are generated:
    ·        Proxy classes that send or receive messages using the Java proxy runtime.
    ·        Bean classes as an outer shell that conform to the J2EE standard. The beans call the proxy classes for communication.
    The classes must be deployed on the J2EE server together with their J2EE application
    see this link for the example scenario http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d

  • Unicode Compatability is a pre requisite for ECC 6.0

    Hi all,
    Can any body send me any link or any document which says tht Unicode Compatability is a pre requisite for ECC 6.0. its really urgent.
    Regrads,
    Ruchika saini

    Hi
    see this
    The Link will be helpful to you.
    Re: Upgrade 4.6 to ECC - What are the responsibilites
    regarding Unicode influence in Standard programs
    Very good document:
    http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
    You need to use the transaction UCCHECK.
    The report documentation is here
    ABAP Unicode Scan Tool UCCHECK
    You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
    Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
    Selection of Objects:
    The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
    PROG Report
    CLAS Class
    FUGR Function groups
    FUGX Function group (with customer include, customer area)
    FUGS Function group (with customer include, SAP area)
    LDBA Logical Database
    CNTX Context
    TYPE Type pool
    INTF Interface
    Only Examine Programs with Non-Activated Unicode Flag
    By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
    Only Objects with TADIR Entry
    By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
    Exclude Packages $*
    By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
    Display Modified SAP Programs Also
    By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
    Maximum Number of Programs:
    To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
    - Call transaction SAMT
    - Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
    For further information refer to documentation for transaction SAMT.
    Displaying Points that Cannot Be Analyzed Statically
    If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
    To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
    Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
    Applikation-Specific Checks
    These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
    View Maintenance
    Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
    UPLOAD/DOWNLOAD
    The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
    Regards
    Anji

  • Pre requisites for implementing ChaRM & CTS+

    Hi Experts
    We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems. 
    I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
    Thanks in advance
    Thanks & Regards

    >
    venkatesan janardhanam wrote:
    > Hi Experts
    >
    > We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems. 
    >
    > I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
    >
    > Thanks in advance
    >
    > Thanks & Regards
    Hello Venkatesan,
    There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
    Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
    Regards
    Amit

  • Pre requisite for Modification

    Hi All,
    Is there any specific pre requisites for Modification adjustments after prepare mode from abap prespective ?
    We need to check these before we do an upgrade on the system from ABAP prespective.
    Cheers,
    Reddy

    Hi All,
    Upgrade document shows these are the planning steps  need to take care .
    Changes to the Translation of an Object Text
    The changes are made in the translation environment (transaction SE63) or in the ABAP Workbench. An
    SSCR key is not required.
    Caution
    Changes to translations of SAP objects are not retained when you perform an upgrade. They are
    overwritten by a new version or deleted. For more information about retaining these changes, see SAP Note 485741.
    Modifications to the Object
    You may need an SSCR key to perform the modification adjustment. Get the key before you upgrade the
    system. For more information, see SAP Service Marketplace at service.sap.com/sscr.
    All modified standard SAP objects are displayed for adjustment in transaction SPDD or SPAU. Objects that
    SAP no longer delivers are deleted. If you want to keep these objects, you have to accept the modifications
    in transaction SPDD or SPAU.
    Caution
    Make sure that before the upgrade there is at least one package in the customer namespace (Z*). You
    need this package if you have to create objects during the modification adjustment, for example, for an
    append structure for customer fields of an SAP table.
    You cannot create packages during the upgrade.
    I have checked the prerequisites mentioned here .
    When i run se95 i get 2 modification adjustments in red color under translations.
    It shows there are transacation LSMW
    Authorization Objects B_LSMW.
    When i double click these two it traverse me to SE63 transaction. Please let me know what i need to check in these two entries in regard to translations.
    Please let me what need to take care for these two before i confirm to BASIS team to go head with Upgrade.
    Cheers,
    Reddy

  • What are the pre-requisite for ABAP Proxy communication?

    What are the pre-requisite for ABAP Proxy communication?

    hi,
    How to create proxy.
    http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
    How to Activate Proxy.
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    ABAP Server Proxies (Inbound Proxy)
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    OutBound Proxy (Client Proxy)
    /people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    File to R/3 via ABAP Proxy with good example
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    Debug your inbound ABAP Proxy implementation
    /people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
    http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
    Synchronous Proxies:
    Outbound Synchronous Proxy
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
    Inbound Synchronous Proxy
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
    regards
    srinivasreddy

Maybe you are looking for