Pre-requisites for running report for P45 RPCP45GN

Hi,
We would like to know that are there pre-requisites steps that are now required to run RPCP45GN program and if so what are they?
Regards
Nimmi

Hi,
The following are Pre-requisites for RPCP45GN in new year legal changes:
1> The starter report RPUEFO_STARTER should be run before running the leaver report RPCP45GN.
2> Last payroll should be run for that perner.
3> The actions must performed e.g. leaver, payroll area changed, etc.
4> Infotype 65 should be correct maintained.
5> Address infotype 6 should be maintained for the perner.
Hope this could solve your problem.
Regards
Roop

Similar Messages

What is the best UI for running reports?

Based on my experience, am I correct in assuming the Silverlight UI is still the only one supported for running reports?
Running reports in the html5 UI is not a comparable experience at all.... yet .
Which UI do you use for your implementation?

I agree 100%... HTML5 UI for Reports is very clunky, slower and not intuitive when Silverlight's is much better.
We actually use the Excel Add-In a lot now, we just build the report's shell in C4C quickly and then do our View/Selection customization in Excel. We find it quite fast and everyone knows how to play with Excel reports quickly.
Since 1402 I believe, the user-experience in the iPad app SAP Customer Insight is also much better with the introduction of dashboards in HTML5 though.
JB.

Running-report-for-all-values

Hi ,
Based on this link i have implemented this logic....
http://bischool.wordpress.com/2009/08/26/avoid-running-report-for-all-values-on-dashboard-when-using-multi-select-prompt/
But for the intermediate report its taking more time to run...nearly 4min...is there any way to reduce it.
Thanks

hi User,
Quick question
Why you are giving (-1) value's as per the doc we can give any value which has to give no results? Have u tried to give some other value ?
Next,Do u have left outer joins between those tables? If yes you should face the same problem with the main report because the filters to be same as intermediate report am i right ?
First tune-up the rpd and get the main report query ,run-it over DB
Due to huge data and the join taking more time....is there way any thing to add to reduce the time??Huge data ?? Intermediate report will not get any results i think it will not take more time to give a message,but due to join conditions only it is taking long time to run
Note :Before getting value from DB it will check the where condition( joins)
Thanks,
Saichand Varanasi

Column limits for Crystal Reports for Eclipse

Hi ,
Is there any column limits for Crystal Reports for Eclipse. While i am trying in my environment, if i am include more than 18 columns its wont show the preview as well as it throws error like as follows "java.lang.NullPointerException at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:991) at java.lang.Double.valueOf(Double.java:447) at oracle.sql.NUMBER.toDouble(NUMBER.java:326) at oracle.jdbc.dbaccess.DBConversion.NumberBytesToDouble(DBConversion.java:2975) at oracle.jdbc.driver.OracleStatement.getDoubleValue(OracleStatement.java:4485) at oracle.jdbc.driver.OracleResultSetImpl.getDouble(OracleResultSetImpl.java:567) at com.crystaldecisions.reports.common.data.JdbcCrystalResultSet.getDouble(Unknown Source) at com.businessobjects.reports.jdbinterface.common.ResultSetReader.readColumnValue(Unknown Source) at com.crystaldecisions.reports.queryengine.ResultSetRecordReader.a(Unknown Source) at com.crystaldecisions.reports.queryengine.Rowset.a(Unknown Source) at com.crystaldecisions.reports.queryengine.RowsetColumn.xL(Unknown Source) at com.crystaldecisions.reports.queryengine.Rowset.z1(Unknown Source) at com.crystaldecisions.reports.queryengine.Rowset.bN(Unknown Source) at com.crystaldecisions.reports.queryengine.Rowset.bI(Unknown Source) at com.crystaldecisions.reports.queryengine.RowsetBase.bJ(Unknown Source) at com.crystaldecisions.reports.queryengine.RowsetBase.za(Unknown Source) at com.crystaldecisions.reports.datalayer.a$e.za(Unknown Source) at com.crystaldecisions.reports.basicdataengine.a.w(Unknown Source) at com.crystaldecisions.reports.basicdataengine.a.p(Unknown Source) at com.crystaldecisions.reports.basicdataengine.a.a(Unknown Source) at com.crystaldecisions.reports.datalayer.a.do(Unknown Source) at com.crystaldecisions.reports.datalayer.a.a(Unknown Source) at com.crystaldecisions.reports.dataengine.m.b(Unknown Source) at com.crystaldecisions.reports.dataengine.j.b(Unknown Source) at com.crystaldecisions.reports.dataengine.m.o(Unknown Source) at com.crystaldecisions.reports.dataengine.m.a(Unknown Source) at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source) at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source) at com.crystaldecisions.reports.dataengine.j.case(Unknown Source) at com.crystaldecisions.reports.dataengine.h.(Unknown Source) at com.crystaldecisions.reports.dataengine.DataContext.a(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.new(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.try(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.int(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.I(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.fl(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.if(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.X(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.moveToPageN(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.lightmodel.FCMPageFormatter.goToPage(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.B(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.A(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.A(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.call(Unknown Source) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269) at java.util.concurrent.FutureTask.run(FutureTask.java:123) at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$_B.run(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675) at java.lang.Thread.run(Thread.java:595)".
But i removed any one column, it wont make any problem and able to preview. Whenever put more than 18 columns, its throwing issue. Can you please help me to identify the issue.
Regards, Siby

Hi,
Are you talking about the fields coming from the Data Source Explorer?.
If "Yes" then there is no such limits.
Are you able to run the report through the eclipse designer?
Thanks,
Neeraj

License for Crystal Report for Visual Studion 2005

Hi All,
I am developing reports for my application using crystal reports for VS 2005. I read on microsoft site (http://support.microsoft.com/kb/318102 ) that the free server software supports three active requests to the server. It further says that developer will need to purchase additional licenses to increase scalability. I think that our application would need the additional license. However, i was unable to find a link on business objects site were i can buy the additional license for crystal report for VS 2005. The link takes me to license for Crystal report 2008. It would be great if you can answer my following questions:
- what version of crystal reports do we need to purchase?
- do we need license for each implementation or do we need license for the developers only.
Thank you.
Best regards,
Abdul

Great questions! Let's get at em, one at a time:
How would you define a print job?
- A print job will essentially be consumed any time the print engine (crpe32.dll) needs to do work. So, processing one report = a print job. However, say you have one subreport, now the number of print jobs = 2. Now, say the subreport is in the details section and runs once per record. And you have 100 records. You will be running 1 + 100 print jobs. Paging to another page consumes a print job. Zooming consumes a print job, exporting and printing to a printer consumes a print job. So, depending on the report and the number of users, print jobs may be used up quite quickly. You can increase the print job limit by modifying the PrintJobLimit in the registry. For CR 2008, the reg entry is here:
HKLMsoftware usiness objectssuite 12.0
eport application serverinprocserver
(the above is used irrespective of the SDK (CR, RAS, BOE))
I am not using report viewer to render the report. I use 'ExportToDisk' method to save the report in word or pdf format. Does 'ExportToDisk' make one print job?
- see above. Again, if the report has a subreport, this will consume at least two print jobs.
How much time does a typical print job takes to complete?
- no way to tell in general terms. There are too many variables that will affect this. From how complex the report to database connections to version of runtime
What care shall I take to reduce the print job time?
- Best you can do is ensure that you are destroying the report object once you are done with it (report.close, report.dispose)
Will using Report Application Server (RAS) or Business Objects Enterprise increase the number of concurrent print jobs? If yes then by what amount?
- no it will not
To utilize Report Application Server (RAS) or Business Objects Enterprise, do I just need to use a specific SDK or is there some thing more to it?
- You do need to use the RAS assemblies for RAS, BOE assemblies for BOE. More information is below.
Sample RAS apps:
https://boc.sdn.sap.com/samples/84/1194
An article on RAS:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b840c0-623f-2b10-03b5-9d1913866b32
A power point as to which may be the best SDK to use:
https://boc.sdn.sap.com/node/972
Differences between all the SDKs (webinar):
https://www.sdn.sap.com/irj/sdn/crystalreports-dotnet?rid=/webcontent/uuid/106b8996-067e-2b10-2f8a-d8c136b3e330
BOE samples:
https://boc.sdn.sap.com/samples/84/1193
BOE SDK library:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
Ludek

License for Crystal Report for SAP 8.8

Hi All!
Our customer ask that can they install the crystal report for SAP 8.8 with multi computer and no need to buy any license for this because they bought license for SAP B1 already.
I wonder this and everyone can help me?
How can we should advice them.
Thanks!

Hi,
If you want more users to edit CR, you need to buy extra licenses. B1 only include one free license for maintaining reports for 2007 version.
Thanks,
Gordon

Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

Wasn't sure which version you are using, so here are the two i think you might be using:
[CR for VS2005|https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip]
[CR for VS2008|https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip]

DB2 support for Crystal Reports for Enterprise And Unx errors

Hi,
I have a requirement to create a report in CrystalReports for Enterprise 4 sourcing data from Oracle 11 and IBM DB2 V9 databases. My first approach is to create relational connections for both the databases in the BO Repository (using Universe designer) and use them directley in the CR for Enterprise. Here I was able to create the two connections but unable to use the DB2 connnection in the report. I get the below error:
"The Database DB2V9 is not supported".
Is DB2 is a supported database for Crystal reports for Enterprise ??
My second approach is to create a multisource universe using IDT. Here when I try to create the Datafoundation layer, I get to see the tables from the DB2 databasae but When I expand the Oracle connection, I get this error: "conversion from UTF8 to charset failed: encoding not loaded".
Im unable to create a multisource universe at all no matter what connections I use.
Here is some additional info:
SAP BI4.1 SP1
Windows 2008 R2 servers
Oracle 11g
IBM DB2 V9.7
Any suggestions please!
Thanks,
Ravinder

Hi,
First of all I would strongly advice you to only use IDT for your universe development. The old Universe Designer is a legacy tool and should not be used unless you are using products that doesn't support IDT universes.
The issue you are facing for your Oracle connection is likely caused by a missing path variable.
Add "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64" to the PATH environment variables on the SAP Business Objects Enterprise server.
Restart the SIA
NOTE: Modify the path in case the SAP BusinessObjects Enterprise is installed in different folder.
Hope this helps.
Cheers,
Josh

Standard report for Reconciliation report for Asset Accounting and GL

is ther any standard report for Reconciliation report for Asset Accounting and GL

hi
functional specification r reqired for this issue
regards
venkataswamy

Urgent Help for Run Report

after creating a button in form builder 9i i want to fire a tigger for execute the report which is built in report builder 9i but it is not executing and showing me these errors..
code behind tigger of button is
Declare
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
Begin
repid := FIND_REPORT_OBJECT( ' c:\rsoreport.rep ' );
or ( ' rsoreport.jsp ' );
or ( ' rsoreport ' );
v_rep := RUN_REPORT_OBJECT(repid);
End;
error = FRM-41219 : Cannot find the Report: invalid id; on Form
and on Status bar Run_Report_Object cannot be null.
i need to execute the report behind form button so if any one know the simple code for this or tell me my code mistake then i would be very thanfull to him

You need to post this in forms forum. But you can check this. It has example how to run report from forms.
http://www.oracle.com/technology/products/forms/pdf/frm9isrw9i.pdf

Problem while running report for Multiple Language

Hi Friends,
The set up for the apps is done for two languages 1. German 2. English.
I’m printing Invoice Report. It is associated with MLS language function.
It returns US or D (for German) according to the setup.
When I run the report from English User, the report runs fine for MLS language function which returns 'US' and not working for ‘D’ as the template is not being picked up(it completed with status Normal and i'm able to see the output by running 'XML Report Publisher' program)
Similarly when I run the report from German User, the report runs fine for MLS language function which return 'D' and not working for ‘US’.
I have created two template for testing purpose.The setup for the template as follows.
Language English Territory US.
Language German Territory Germany.
There is no effect on the combination of the language and territory.
Please help me...
Regards,
A. Swain

When a report terminates with an error, REPORT_OBJECT_STATUS returns the value "TERMINATED_WITH_ERROR", which is 21 bytes of data, but rep_status is defined as 20 bytes. The 6502 error is due to the data not fitting the variable.
I recommend wrapping the REPORT_OBJECT_STATUS function with a SUBSTR that limits the data returned to 20 bytes, which will ensure the results fit.
For example:
rep_status := SUBSTR(REPORT_OBJECT_STATUS(v_rep), 1, 20);

Recomendations/limitations or Pre-requisites from Account perspective for Exchange hybrid between Exchange 2010 & O365

Hi
I need to migrate a few users from Exchange 2010 on premises to O365. I will be using Hybrid mode. I need to know what are the recommendations & Pre-requisites or limitations from Account\Mailbox perspective?Please suggest.

Hello,
I think it will be more efficient to ask this question on Exchange Online forum:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Tcode for run reports

which SAP tcode can be used to run reports to list the display for parts current source list supplier and most update infro record price?

Hi,
Check in tables,
RSZELTDIR Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references
RSRREPDIR Directory of all reports (Query GENUNIID)
RSZCOMPDIR Directory of reporting components
RSZRANGE Selection specification for an element
RSZSELECT Selection properties of an element
RSZELTDIR Directory of the reporting component elements
RSZCOMPIC Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL Query Designer: Directory of Cells
RSZGLOBV Global Variables in Reporting
Thanks
Reddy

Authorization for running report based on Remote Cube

Hi ,
I have created a report based on Remote cube in BI 7.0
I have created a DTP with Direct access to load the Remote cube.
While running the report based on Remote cube , I am getting error
'You are not authorized for the DTP '
The report is running only when I assign the '*' value to the authorization objects for the role in which the report is stored:
S_RS_DTP = * (For DTP)
S_RS_TR = * (For Transformation)
S_RS_DS = * (For datasource)
I want to restrict the values to the objects related to my report only rather than * which means ALL.
Please help what values to assign for these authorization objects for the Role.
Thanks.

Hi,
You need to make necessary settings in RSECADMIN for the Authorization Objects. The default values will be * . You have to customize them to suit your requirement.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/101fb4f5-eb7c-2c10-5daa-b479c47f0a14
Regards,
Suman

T-codes to get payment run report for different company codes?

Hello sap gurus,
I have a scenario like -
> use of IDocs to process vendor and employee payments. Both bank transfers and checks will be processed through interface.
Now, What is the t-code to get report for payments for different customer, comp codes and vendor?
I am new to SAP in testing.
Appreciate ur help......
Regards,
Shamsher
Edited by: shamsher123 on Jun 4, 2010 11:52 AM

Hello,
See the List below hope this will help.
MIR5 - Display List of Invoice Documents
S_ALR_87012105 - List of Down Payments Open On Key Date - Vendors
S_ALR_87012085 - Vendor Payment History with OI Sorted List
S_P99_41000099 - Payment List
Prashant Rathore.

Pre-requisites for running report for P45 RPCP45GN

Similar Messages

Maybe you are looking for