Predifined set types in product category
Hi forum,
the pre defined set types viz comm_pr_shtext,comm_pr_unit.... are not visible in the category(service) which is assigned to the hierarchy.so creation of products under this category is not being allowed by the system.are there any settings to correct this.plz guide.points guaranteed.
thanks in advance
shridhar
hi,
i have replicated the problem in my system, it is working fine.
answer the following:
have you created a category for service for a base hierarchy, say "Service"?
Have you specified the product type while creating this category?
Have you selected/ checked 'Product/object Assignment Possible' ?
have you created another category for your purpose say "Maintenance below the above category "Service"?
if you have done the above steps, you should be able to assign the SAP provided set types to this new category.
otherwise raise a note to SAP.
regards,
Rishi
Similar Messages
-
Hi,
Its urgent requierment i need set type if any for updating product price for z type condtion table.
I CRM_PRODUCT_CONDITIONS check this package but i dont get any input. the bapi which i am using have no code inside for conditions COM_PROD_MATERIAL_MAINTAIN_API.
i tried these bapis :
COM_PRODUCT_MAINT_CONDITIONS : not Working
PRC_MAST_CREATE_CONDITION :I am uploading conditions separately by using this FM PRC_MAST_CREATE_CONDITION
But this FM is throwing dump when I execute it with correct product Id.Attached screen shot .I am passing CRM for application and
PRODUCTCRM to maintenance group.It is throwing dump at product_id.any input
-
Get Product Type from Product Category
Hello,
I need to get Product Type (Material or Service) from Product Category.
Does anyone knows the Function Module which can be used.
Warm regards,
GirishHi Girish,
Use FM "COM_PRCAT_READ" to read the product type of a product category.
Give the Product category Guid and you will get product type.
To get the Guid of a product use FM 'BBP_CATEGORY_GET_GUID'.
Hope this solve your requirement.
Note: Reward points for helpful answer.
Regards,
Andy.
Dont forget to Reward points for helpful answers
Message was edited by:
Andy V -
HI,
We are tring to download Vehicle details from SAP VMS to SAP CRM through middleware. We have created new category ISAM. We find lot of set types in various online help. Can any one provide the Exact SET types to be used to download all the vehicle related details includinf for ISAM_OWN_UPLOADED.
With Regards,
SelvamHi Selvam-
Were you able to load data into CRM vrom VMS? I am trying that and as you said there is lots of documentation but I am looking at specifics. Could you share your experiences?
Thanks, Amit -
Hello,
We have added some Z set types for our CRM Products and have created two Z tables for this. But even though we update these tables, we are not able to get the values for product on the screen.
Can someone tell me what all tables should be updated when we have cutsom Set Types in use?
Rgds
PriyankaHi Priyanka,
I Guess you want the Values in the Ztable as F4 help values for the Z attributes in Z set types of the product.
To do the same plz follow the steps mentioned below:
1) Identify the field(Attribute in Set type) for which you want the F4 help.
2) Go to SE11. Select Data Type and enter the name of the Attribute value.
3) Press Change
4) Doble click on the Domain to go to the domain element associated to it.
5) In domain element screen, go to Value Range Tab.
6) In Value Range Tab, you have a Value Table field, Enter the ZTable from which you want the value to be populated in F4.
7) Save and Activate the Domain element.
Test the scenario.
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
Creation of Service Product with Set Type and Attribute
Dear All,
Please guide me with proper step by step process,
How to create the product with the set type and attribute for service industry in sap crm 7.0
Regards,Hi Nitin,
Before creating the Service type of product, you have to define the Base category for Service type product. Generally the category for service will be created under the R3 hierarchy R3PRODSTYPE. You can create this category using the TCode:
COMM_HIERARCHY. Here you have to select the product type as Service and have to assign the set types to the category.
You can create a service product using the transaction : COMMPR01 -> Click on Service ICON -> Select the Category for Service Type. Then fill in the details for Service Product description, Service ID(Based on number range settings for products), Language.
Also fill other details like Base Unit of measure, Pricing condition for different sales areas for the service product.
Since you are using CRM7.0, you can do all these activities using a POWER USER role.
For more information about Set types and hierarchies please refer the following help link:
http://help.sap.com/saphelp_crm70/helpdata/EN/46/57672501a208e7e10000000a114a6b/frameset.htm
Hope this helps!
Regards,
Chethan -
How to change the Organizational Dependency of a Set Type
Hi All,
With the creation of a new set type we made the mistake to not select "Distribution-Chain-Dependent" in the "Org. Dependency"-field.
Now we already maintained a few materials (only in development system) with data in the attributes of this set type, but noticed that the data is not Sales org. dependent. Seems logical, because we forgot to set this org dependency in the set type, but now we want to correct this and I hope you could provide us with the best way to do this.
The field it self is no longer editable in change mode (seems logical, since all tables/structures/relations are already created and messing with this dependency could mess things up) but we really need the org dependency for our product attibutes. So, I wanted to create a new set type, and replace the old one with this new one in our category, but I can't even delete the old set type from our category, because I get the message: "Products of this category already exist; Set type cannot be deleted".
What would be the best way to solve this? (is there a way to change the org dependency of the existing set type?/should I create a new set type? If so, how to delete the old set type and it's data?)
Br,
Martijn.Anyone?
-
Error while Generating Set Type
Hi All,
While adding new attribute in a Z set type for products the system generated error during generation.
Now when I am trying to display or change that set type the system is giving error "Please enter a description for set type Z*******" and terminates.
I tried looking the various methods, screens and tables generated but everything looked fine.
Please suggest how to restore this set type.
Thanks.Hi Gervase,
I tried creating the relation for the settype manually in extend object Model of products but it is giving error ProdSetICM_OTH_WEAPONA01 doesn't exist.
This is strange because this entry has been mainted in all systems and it doesn't exist in Object list.
Any clue to this.
Regards,
Nitesh -
Hello Gurus,
I tried to replicate Material Group from ECC to SRM using R3AS tcode.
When I checked the status in R3AM1 it was showing running status but by mistake I clicked on cancel button and the status is "abort"
Even after setting filter in Product category I tried to load but the system is throwing same error message as "abort"
Please help me how to do fresh load.
Thanks,
VishHi Vishvas
I assume that you have correctly maintained the relationship of BP and org unit in PPOSA_BBP ?
You can see that they are linked in the org structure .
Follow these and see if it helps ?
1. Now try to click on repair
2. Fill the email ID here ..
3. Click on relationship and then display there also edit the Email Address ..
Regards
Vinita -
Standard set types in Comm_Hierarchy
Hi
In comm_hierarchy- I am adding a standard set type to a category. The name of the set type is comm_pr_unit. I am unable to sdd this set type because it is not visible in the drop down of standard set types.
However I can see this set type in the comm_attrset.
Please let me know how I can add this set type.
Regards
TarangHI,
Settypes cannot be assigned across the Hierarchies.
If your settype is already assigned to one heeirarchy, say R3PRODSTYP, and you are trying to add this settype to another hierarchy say ZHIER, then this is not allowed.
Kindly check if the settype you are trying to use is assigned under another heirarchy!!!
Kindly reward with points in case helpful...
Sharif -
Can't find Set type when maintain Product Category in Local Scenarios
hi, expert
We use SRM7.0 in Local Scenarios. Just create local material.
Our developer made a 'Product Categories mass inport programme' , but for some unexpected reasons, we cann't check or edit original prodcuct categories. so I have to create new product category manually.
When i create prodcut , i get a error message ' Data cannot be maintained for set type COMM_PR_SHTEXT . ' So i wanna add set types 'COMM_PR_SHTEXT' to this product category. but i cann't find this set type in the list whiche ever exist !
which i can find in the list show below:
CALL_FWD_TD
COMM_PR_GTIN
COM_COMMERCIAL
COM_TA_R3_ID
CRMM_PR_TAX
GSM_PHONE_TD
ISPS_MARA
what should i to do, make the set type 'COMM_PR_UNIT' , ' COMM_PR_SHTEXT ' and some 'Z_xx_settype'... can be used.
Thanks .
claud
Edited by: Guang Li on May 23, 2011 7:07 AMHi
check this link
Materials replication from R/3
Regards
G.Ganesh Kumar -
Issue in Product Category regd Set Types
Hi,
I am customizing Product Category ( for CRM 5.0 standalone) for Material using Building Block guides. I have created root hierarchy and category as described. Now I want to create category for Sales products using the root category. While creating this category the BB guide states following customization steps
Basic Data on Category
Product Type Material
Product / Object Assignment Possible
Product / Object Maintenance: Control Fields
Can Maintain Documents (Click this)
Can Maint. Conditions (click this)
But in my case I am not able to see following in Product / Object Maintenance: Control Fields section (following 2 controls)
Can Maintain Documents
Can Maint. Conditions
Because of this I am not able to get Set types COMM_PR_UNIT, COMM_PR_LGTEXT1, and COMM_PR_SHTEXT
Pl provide guidance and assist this is quite urgent.
With regards
Ambar AdhavPlease check this ...
1. You have created a hierarchy...
2. you have cretad a root category...say CRM_PROD
3. check whether you have created a sub category under the root category.
to do that... Please click on CRM_PROD.. right click and create category..
then we can see the
Can Maintain Documents
Can Maint. Conditions
Hope it helps..
<b>Reward points if it helps you..</b>
Yaswanth.K -
Not assigned set type to category
Hi, GURU!
I want to assign set type COMM_PR_MAT to my category in transactional COMM_HIERARCHY, but i don't see this set type in the list. I find this set type (COMM_PR_MAT) in transaction COMM_ATTRSET (Search for predefined set types).
How to assign set type COMM_PR_MAT to my category?Hi,
You must ensure that the product type for both the category as well as set type. Only then will the set type appear in the list for selection in the category tab in COMM_HIERARCHY.
Set types cannot be assigned to a hierarchy directly as mentioned in your post. -
Set type COMM_PR_SHTEXT error when creating product
I am trying to create a dummy0 product for untilities serivice.
I get the above error.
if I want assign set type COMM_PR_SHTEXT is not existing the list.
is there any way to overcome this issue?Hello Nick_crm
A settype can only be assigned to one hierarchy per product type. The SAP delivered settypes that you have mentioned above are assigned to category Z_SLA (type Service). Hence you cannot use them in the category
you have defined (type Service).
It is advised to use the predelivered category SRV_ as a base category for creating services. You can assign the other enhancements (settypes) required to the category you have defined and later assign the service
to this category too.
Incase you do require to assign the mentioned settypes to your category then first you will need to regsiter your hierarchy as the base hierarchy in transaction comm_prapplcat.
I would like to point to the steps below as to how you can find out where the set types are being assigned.
1. Goto the transaction -> COMM_ATTRSET -> here enter the
set type as ' COMM_PR_SHTEXT' and now click the 'where used list'(there
is a button in the toolbar for the same)
2. Now you should see a list of all category ids along with
hierarchy id's where the settype is being used.
3. Select any one of the category id.
4. Now goto the trx COMM_HIERARCHY -> and click 'Open Category'
5. Now you can see the usage of the settype in settypes tab.
6. To design the settype -> goto the root category and remove the
same , so that you could now assign it to your own category.
Since a settype can only be assigned to one hierarchy per product type, It is advised to use the predelivered category as a base category for creating services. You can assign the other enhancements (settypes) required to the category you have defined and later assign the service to this category too.
thanks Willie -
Add set type COMM_PR_SHTEXT to product type Service
Hi anyone,
I am trying to add the set type COMM_PR_SHTEXT into a category typed "Service".
I am using the transaction COMM_HIERARCHY.
The problem is when I try to adding the set type (COMM_PR_SHTEXT) doesn't appears it in the matchcode to be selected.
Does anyone knows any solution ?
Thanks in advance.
RegardsHello,
It is possible to add the settype to a single category within a Product Hierarchy per product type.
Also, child categories will inherit this assignment by default.
So, looks like settype COMM_PR_SHTEXT has already been assigned to a category within that
hierarchy for that product type.
You can check this out using table COMC_SETTYPE and COMM_CATFRGR.
So, solution would be to remove the assignment of settype from other category within that hierarchy and re-assigning to the required category. But this is not allowed, if there already exists data for that category.
Other option is try to create new category under the parent category to which that settype is already assigned, so that new category can inherit the settype.
Best Regards,
Shanthala.
Maybe you are looking for
-
HELP!!! How do I get rid of RIM Network Spam
I get 50 of these a day. I have tried to filter it on my Curve 8330, I blocked sender on my outlook emails and on my comcast webmail I reported as spam and it keeps coming. I recently change me email address and it found me again. I uninstalled bl
-
I have my new apple tv connected to my tv with an hdmi cable, but nothing appearing on the screen. any suggestions?
-
I have downloaded my photos to a DVD disc. Only 2 were not PSD and they are the only ones I can view on my TV. Can anyone tell me where I am going wrong. Is it not possible to download and view these PSD photos. They are the ones I have altered sl
-
IPod won't turn off when plugged into computer! PLZ HLP!
I have an iPod touch 2g, and now whenever I connect it to iTunes, it won't turn off. It will just turn itself back on.
-
can we assign some dynamic value while declaring the constant. if not give some other logic to assign dynamic value to a constant. parameter: p_char(25) obligatory. data: len type i. len = strlen(p_char). constant c value len. here 'len' field contai