Prefered Credentials error in OEM

The "Logon as a batch job" as been set against USERX who is also part of
the ORA_DBA group. Also, USERX was the one who performed the installation
of Oracle 9iR2. When I set my "Prefered Credentials" I am using a specific
unique one for a individual DB. My values are as folows:
username: USERX
password: PASSWORD
confirm password: PASSWORD
role: SYSDBA (I even tried NORMAL).
When I save these settings and I try and run basically any data management
for backup management, I always get the following error:
"The wizard can not be launched because the prefered credentials for node ABC are either not set or invalid. "
What's going on?!?!?!?

Raman,
In the OEM you can have databases and nodes. The databases credentials expect the username/password created in database - the one you would've used when you log in using sqlplus. the node credentials require the os username/password - the one you would've used when you log into your server.
Check figure 1.15 at
http://download-east.oracle.com/docs/html/A96670_01/ch_conso.htm#7136
I suspect the "userx" is the OS account. You should enter username/password for the target_name "ABC", target type - "Node"
The database username/password/role you should enter for the target_name "Your database name" , target type - "Database"
Mike

Similar Messages

  • 11g OEM GC - Preferred Credentials

    Hi all,
    Having some problems with setting preferred credentials for an 11g database on 11g grid control. Both systems are Oracle Linux 5.6 one is x64 and the x86.
    It excepts SYSTEM but not SYS and not the ORACLE user.
    I have tested ssh from the OEM server to the DB server in question as the ORACLE user.
    I have been able to connect via TNS from the OEM box to the DB box as SYSTEM but SYS does not work and errors as insufficient privileges.
    I have started an SR with Oracle but yet to hear from them. Just wondered if anyone in the community has had problems.
    Thanks to all!

    Jamie Gadong wrote:
    I'm afraid I have been through this and it actually make the problem worse. When I enable a password file, which I did not have in place, it completely locks out the sys user.
    I am yet to hear back from the SR I started. I will let you know what the outcome is from this.
    Edited by: Jamie Gadong on Jul 19, 2011 2:50 AMHi,
    I agree with Frank.
    First connect to the database from the database as user SYS, using:
    sqlplus / as sysdbaThen using another shell, create a password file for the database.
    Make sure you use the same password for this password file as the SYS user has, or change the password of SYS afterwards.
    HTH
    FJFranken

  • Unable to set Host Preferred Credentials in OEM

    Hi Experts,
    I installed Oracle 10g R2 on on windows machine (XP Professional SP2).
    Everything is OK except I can't set Host Preferred Credentials.
    I logged in Windows using Windows Domain account, connected EM DB console as sysdba.
    I used domain user name to set Host Credentials and get the error:
    Connection to "mysystemname" as user xxxx failed: ERROR: Wrong password for user
    I also added the user to "Log on as a batch job" under Local policies.
    Then I set oracle as Host Credential, still get the same error.
    Please help me how should I set the Host Credentials for Oracle 10g on Windows?
    Thanks in advance

    The keyword here is domain user, so not local user.
    Normally Oracle runs using a local account, and you need that local account to connect.
    You can try to make sure the domain account is a member of the local ora_dba group.
    If that doesn't work, you probably need to start the Oracle service using a domain administrator account.
    Sybrand Bakker
    Senior Oracle DBA

  • Host preferred credentials suddenly not working

    Windows 11GR2 on Windows 2008 64 bit
    For some reason I am getting failures in dbconsole, I double check all my host credentials etc., part of dba groups, part of log on as a batch job etc. are all ok.
    Everything was working fine.
    Now I try to clone this database (or do anything involving jobs) to a test database on same server and I get errors. I go to database preferred credentials and enter in domain\username / password and get errors, one will say "Connection to servername.domain as user domain\user failed. Next time I will get an error saying internal error check logfile - WHICH LOGFILE?
    Everything was working fine until recently, then just stopped. Oracles solution is to drop and recreate entire repository, but I can't take the downtime to put database in quiesce mode.
    <rant>Oracle, do us a favor, +please put fully functional 9i version of OEM back as an option!+ There is nothing I dislike more that spending HOURS AND HOURS trying to debug a bloody TOOL that's supposed to make "database administration" so easy! I spend far more time working on this piece of crap user interface than I do on the database.. </end rant>
    I feel better (almost)

    Looked at the various log and trc files, nothing that I can see helps me. Also, in my OP I forgot to mention that in the services screen it shows neither databases dbconsole service as running, yet I can open dbconsole for either of them, and everything works except submitting jobs.
    emca status dbconsole command show this:
    C:\$orascripts>emctl status dbconsole
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    https://winms-oradb1.millsite.net:5500/em/console/aboutApplication
    EM Daemon is not running.

  • [Solved] Unable to set preferred credentials

    (Windows 2003, SP2 for all computers ... locked down by local administrators) Grid Control Rel 2 with patches (but not up to R3).
    I created a test userid, made it part of the local administration group, added it to the 4 required privileges "log on as batch", "replace process level token", "act as part of OS", and "adjust memory quotas". When I attempt to set te preferred credentials, I get the error
    "Connection to cepaoas63.COE.ADS as user test failed."
    That's all. No reason is given, as indicated by some of the other similar queries.
    Questions:
    - Any other privs normally required (and possibly normally given to administrators)?
    - Any other policy setting your can think of that might defeat this?
    - Any firewall stuff that might have an effect?
    Message was edited by:
    Hans Forbrich
    Patch 4703814

    From emoms trace file:
    2007-05-02 15:14:48,921 [EMUI_15_14_44_/console/pref/setCredentials$targetType=host] ERROR creds.SetPrefCreds testCreds.1298 - SetPrefCreds.testCreds(): CredsException: Connection to gdntlnx1.guident.com as user oracle failed.
    2007-05-02 15:15:10,796 [EMUI_15_15_06_/console/pref/setCredentials$targetType=host] ERROR creds.SetPrefCreds testCreds.1298 - SetPrefCreds.testCreds(): CredsException: Connection to gdntlnx1.guident.com as user oracle failed.
    2007-05-02 15:15:29,171 [EMUI_15_15_27_/console/pref/setCredentials$targetType=host] ERROR creds.SetPrefCreds testCreds.1298 - SetPrefCreds.testCreds(): CredsException: Connection to oraclebi.guident.com as user oracle failed.
    [EMUI_15_38_07_/console/monitoring/hostOverview$ctxType=Hosts$type=host$target=gdntlnx1.guident.com] ERROR host.HostOverviewDataObject getLogonInfo.2340 - IOException in sending Request :: Connection refused: connect
    oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection refused: connect
         at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1726)
         at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1622)
         at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1545)
         at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:913)
         at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2282)
         at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2223)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at oracle.cabo.ui.data.provider.MethodDataProvider.getDataObject(Unknown Source)
         at oracle.cabo.ui.data.provider.TableDataProvider.getDataObject(Unknown Source)
         at oracle.cabo.ui.data.provider.CachingDataProvider.getDataObject(Unknown Source)
         at oracle.cabo.ui.data.provider.DataProviderStack.getDataObject(Unknown Source)
         at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
         at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
         at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
         at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
         at oracle.cabo.ui.data.DataBoundValue.getValue(Unknown Source)
         at oracle.cabo.ui.BaseUINode.getAttributeValueImpl(Unknown Source)
         at oracle.cabo.ui.BaseUINode.getAttributeValue(Unknown Source)
         at oracle.cabo.ui.laf.base.TextRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.laf.base.DataScopeRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.laf.base.xhtml.BodyRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
         at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.servlet.ui.UINodePageRenderer.renderPage(Unknown Source)
         at oracle.cabo.servlet.AbstractPageBroker.renderPage(Unknown Source)
         at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
         at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
         at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:377)
         at oracle.sysman.eml.app.Console.doGet(Console.java:318)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:88)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
         at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    2007-05-02 15:38:38,234 [EMUI_15_38_33_/console/monitoring/hostOverview$selTab=0$target=gdntlnx1.guident.com$type=host] ERROR host.HostOverviewDataObject getLogonInfo.2340 - IOException in sending Request :: Connection refused: connect
    oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection refused: connect
         at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1726)
         at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1622)
         at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1545)
         at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:913)
         at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2282)
         at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2223)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at oracle.cabo.ui.data.provider.MethodDataProvider.getDataObject(Unknown Source)
         at oracle.cabo.ui.data.provider.TableDataProvider.getDataObject(Unknown Source)
         at oracle.cabo.ui.data.provider.CachingDataProvider.getDataObject(Unknown Source)
         at oracle.cabo.ui.data.provider.DataProviderStack.getDataObject(Unknown Source)
         at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
         at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
         at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
         at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
         at oracle.cabo.ui.data.DataBoundValue.getValue(Unknown Source)
         at oracle.cabo.ui.BaseUINode.getAttributeValueImpl(Unknown Source)
         at oracle.cabo.ui.BaseUINode.getAttributeValue(Unknown Source)
         at oracle.cabo.ui.laf.base.TextRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.laf.base.DataScopeRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.laf.base.xhtml.BodyRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.renderContent(Unknown Source)
         at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
         at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.ui.BaseUINode.render(Unknown Source)
         at oracle.cabo.servlet.ui.UINodePageRenderer.renderPage(Unknown Source)
         at oracle.cabo.servlet.AbstractPageBroker.renderPage(Unknown Source)
         at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
         at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
         at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:377)
         at oracle.sysman.eml.app.Console.doGet(Console.java:318)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:88)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
         at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    OEM Grid Control Version is: 10.2.0.2
    Windows Version is: Windows XP Professional Version 2002 SP2
    I had no issues with installing this version 10.2.0.2. My remote agents are uploading information back to OEM and I can see this information in OEM. I just cannot set the host preferred credentials which means I cannot take advantage of the maintenance features like scheduling a backup.
    I originally tried to install 10.2.0.2 and upgrade to 10.2.0.3 but the OEM wasn't working after I did the uprade. So I did a fresh install on another server and just stayed at 10.2.0.2. I don't have a requirement to be at any particular version.

  • Preferred Credentials, Vista Ultimate, Oracle 10.2.0.3

    I do have an Oracle Db Rel 11.1 running on Notebook with Vista Ultimate (ok ok i know ;-)
    Everything is working without problems
    Now i installed Oracle 10.2.0.3 for Vista in a different home on the same notebook - Installation finished without errors - dbconsole running and i can enter Oracle Enterprise manager but
    when i try to set preferred credentials for this db to log on to the host i always get the answer that the connect to system failed using the given credentials - the account i use for connect to host is the same as i use in my 11.1 db. account and password are correct. And after this failed check i recieve a message from Microsoft system the Oracle Enterprise executable has been stopped due an error.
    Same problem i do have when i try to create a job and give host account.
    the used host account does have the right *log on as batch job
    Any Ideas?? Thanks

    HI..
    If it might help [http://amansharma.wordpress.com/2008/03/15/remote-operation-exception-in-em-its-workaround/]
    Anand

  • OMS Preferred Credentials

    Hi
    I made a new management server and repository (9.2.0.4 + patchset 9.2.0.8) installation on a SLES9 (32Bit) sytem, and all is working well
    The only problem is, that i cannot store the preferred credentials to the system with Enterprise Manager Console. I can enter the login-data to the form and when i try store the settings they get lost - they never get stored to the database.
    There is no error message or something else ... notification settings and other administrator preferences are ok, but not the preferred credentials.
    What can i do to fix this ?
    I don't find any hints to solve the problem in the docs or in internet...
    best regards, andi

    You should be able to store the preferred credentials. You have specified at the beginning of your thread you are using a unix like platform, and you should be able to store them either on windows or on unix like environments. You only have to declare them at the preferred credential section.
    Could you please post the specific error text displayed when you attempt to store the credentials?
    ~ Madrid
    http://hrivera99.blogspot.com/

  • Active Directory plugin: Preferred credentials not recognized

    I have installed the Active Directory Plugin 2.0.2.1.0 in my Grid Control (10) and I am getting the following error:
    Version 2.0.2.1.0
    Description Microsoft Active Directory monitoring including reports
    Deployment Requirements: Requires network access and credentials of the host where Microsoft 'Active Directory' is installed and running
    I set the preferred credentials for the agent. They are a user/password for someone that has "installation" and "admistration" privileges on the Active Directory server.
    Is there a specific format the userid and password should be entered? (i.e. cn=xxxx)

    If entering username only is having an error, enter the username as DOMAIN_NAME\username. Where domain_name is the domain of the AD host

  • Oracle 10g EM DB console Host Preferred Credentials for Windows

    Hello:
    I install Oracle 10g R2 on on windows machine (XP Professional SP2).
    Everything is OK except I can't set Host Preferred Credentials.
    I logged in Windows using Windows Domain account, connected EM DB console as sysdba.
    I used domain user name to set Host Credentials and get the error:
    Connection to xxxx as user Domain\user failed: IOException in sending Request :: Connection refused: connect
    I created a loal user oracle, added it to ORA_DBA group, add it to "Act as part of the operating system" and "Log on as a batch job" under Local policies.
    Then I set oracle as Host Credential, still get the same error.
    Can any one tell me how should I set the Host Credentials for Oracle 10g on Windows?
    Thanks for any help.

    Thank you, mnazim:
    Here is the message from emagent.trc:
    2007-03-05 11:36:55 Thread-3928 WARN http: snmehl_connect: connect failed to (xxx-xxx.xx.xxxxxxx.com:3938): No connection could be made because the target machine actively refused it.
    (error = 10061)
    2007-03-05 11:39:00 Thread-3872 ERROR http: 1760: snmehl_read: error on read: An existing connection was forcibly closed by the remote host.
    (error = 10061)
    2007-03-19 16:47:48 Thread-3588 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-240,and testTZoffset for America/New_York:-300 do not match
    2007-03-19 16:47:49 Thread-3588 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-240,and testTZoffset for America/New_York:-300 do not match
    If it is the new DST that cause it, how can I solve it?
    I just download Oracle 10g for test, and I don't have access to metalink. Is there any place else that I can get the Patches? or is there any other way to solve it?
    Thanks again.

  • My Oracle Support Preferred Credentials in Grid Conrol 11g

    Can anybody tell me how Grid authenticates for the preferred credentials in Grid Control 11g.
    In the patching setup screen, I've sucessfully connected to updates.oracle.com and get the message
    https://updates.oracle.com was tested successfully using the Proxy.
    I now get the message
    My Oracle Support Credentials Not Set - You have not set the My Oracle Support credentials. Click the left link and supply the missing credentials.
    and when I try to follow the link and input my MOS credentials, it times out with a message
    'Networking error: Unable to connect to My Oracle Support'
    thanks

    Click on top right: Preferences ->Preferred Credentials
    On the lower section titled "My Oracle Support Preferred Credentials", click on: Set Credentials
    :p

  • 10g host preferred credentials, wrong password

    I'm getting an error message trying to set the host preferred credentials in Enterprise Manager 10g:
    "Connection to host hostname.changedthis.com as user landersd failed: ERROR: Wrong password for user"
    I've triple-checked the password, and tried several variations on the username, but I can't seem to get it to work. When I look at a connected session (osuser in V$SESSION), the username comes up as IPS\landersd, but that username doesn't work either. Is there a way to specify the username that I'm not doing correctly? I also checked the privileges and the user has 'logon as batch job' privileges, and is part of the ORA_DBA group. What am I missing?

    Windows only, I assume.
    The format of the data to be entered in the Username fields on the Credentials pages is "Domain\Username". This setting is only accepted when the user has the "Log on as a batch job" right assigned.
    Select the "Administrative Tools" control panel. Then "Local Security Policy". Expand "Local Policies", select "User Rights Assignment". Finally add the User to "Logon as a Batch Job" local security setting.
    With thanks to Rachel from Oracle Support.

  • Host Preferred Credentials failed

    I have installed grid 10.2.0.4. on Aix box(64-bit). And I am trying to install Sql server plugins.
    For that I installed 10.2.0.4 gird Agent Windows XP(32-bit). Agent insttalled successfully. But When I am trying to configure Host Preferred Credentials at that time I am getting error. Connection to 'windowsserver name' as user 'username' failed.
    below is emoms.trc
    2008-10-30 12:55:48,758 [EMUI_12_55_48_/console/pref/setCredentials$targetType=host] ERROR creds.Set
    PrefCreds java.? - SetPrefCreds.testCreds(): CredsException: Connection to 'windowservername' as user
    'username' failed.
    Thanks in advance

    Set the window local securiry policy as below and check again
    1)Control Panel, Administrative Tools.
    2. Click on Local Security Policy.
    3. Local Policies, User Rights Assignment.
    4. Double click, 'Log on as a batch job'.
    5) provide username along with domain <co.uk>/<foo>

  • Set host password in preferred credentials

    I try set the "Database Preferred Credentials", in Normal(user system) and SYSDBA(user SYS) its work.
    But in Host username(the Administrator account of windows) and password show the error "Wrong password for user".
    How I can set the host username and password? who are the Host Username, its is from oracle or windows?
    Please Save me!!!!!!!!!
    Txs

    I have the same problem. I have already put the user in "Logon as a batch job", but doesn't work!! I have struggle with this problem for almost two weeks!

  • Integrating with The OMS  preferred Credentials sub system

    Hi to all ,
    I'm trying to manage the default credentials outside of the OMS repository ,is there a way
    to do so without pushing the credentials via the EMCLI?
    Something like replacing the Stored procedure that dose the Preferred credentials check?
    Thanks a lot,
    Asaf.

    You should be able to store the preferred credentials. You have specified at the beginning of your thread you are using a unix like platform, and you should be able to store them either on windows or on unix like environments. You only have to declare them at the preferred credential section.
    Could you please post the specific error text displayed when you attempt to store the credentials?
    ~ Madrid
    http://hrivera99.blogspot.com/

  • Excluding ORA-00060 errors from Generic Alert Log Error in OEM

    Hi,
    I want to remove the alerts for ORA-00060 errors from OEM Alerts. In "Generic Alert Log Error" the current expression for Warning is ORA-0*(600?|7445|4[0-9][0-9][0-9])[^0-9]. How should I change this expression so that it will not send alerts for ORA-00060. I am not much aware of perl :-). Please help me with the expression.
    Target Type=dbname
    Host=host
    Metric=Generic Alert Log Error
    Metric Value=ORA-00060: Deadlock detected. More info in
    Time/Line Number=Mon Nov 2 10:02:54 2009/134883
    Timestamp=Nov 2, 2009 10:17:14 AM EST
    Severity=Warning
    Message=ORA-error stack (00060) logged in /eb_rdo0_p/oraadmin/pnoltp/bdump/alert_.log.
    Notification Rule Name=Database Alert
    Notification Rule Owner=SYSMAN
    Notification Count=1
    Thanks,
    Varma

    this is default monitored objects.
    To stop monitoring for this object, clear the Critical and Warning threshold values and click Continue.

Maybe you are looking for