Premier CS3 can't see Pinnicle Studio device

I have a Pinnicle Studio 11 input device, purchased primarily to input vhs tape into Premier. This involves taking RCA imput into the device and then going from the hardware into the computer through the USB 2 port.
Pinnicle Studio sees the device and can detect the video stream. Microsoft movie studio (or movie maker, or whatever it is caled) can see the stream, but Premier does not detect the device. When I select Capture it indicates "device off line". Attempting to set the capture device fails because Pinnical doesn't show up in the list. There is a Dazzle selection, but it doesn't work.
Any help?

Get rid of anything Pinnicle. (complete crap)
All you need to do is take the outs of your vcr and plug it into your mini dv camera. From the camera you would capture firewire as usual. Very easy. (That is if your camera has inputs.)

Similar Messages

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well?

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well? I have also tried may suggestions on the apple support site and none have worked. Any suggestions are welcome.

You need iTunes version 11+.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

How can i see the "manage devices" in my itunes account? because i want to remove a device from using my apple id. tnx so much

how can i see the "manage devices" in my itunes account? because i want to remove a device from using my apple id. tnx so much

Thanks pvonk, I will try downloanding the book from the Iphone right now.......
Just tried to download and it wants me to buy it again? Is there some way around this? I guess I thought that was the whole point of the cloud, buy it once and access from any of your devices right?
Also, I have logged into the icloud.com as suggested and will plink around there for a bit and try to understand. It is just all so dang different that what I am used to; Apple's way, that is.
Thanks again for the Icloud tip and if you know of a way to download without making a 2nd purchase I would sure love to hear it!
Geez. one other thing (I guess I am complaining) but I bought more space in the cloud, they took my cash fast enough but have not yet increase the size of my storage space yet? Is Apple sometimes slow to get internal stuff done?

Help! Sometimes Dreamweaver CS3 can't see my .css file

Once a day or so dreamweaver cs3 can't see my .css file. So
all my files that I am working with turn to poop. To fix I have to
close each file and re-open. Then my .css returns and all my files
are how they should be. Anyone else ever have this problem?

That I do not know - I've never looked. From the styles
panel, I do know that it does not completely disapear - it shows
the .css - just all the rules are missing. I will look next time.
Usually only happens when multiple files are open. Thanks

WRT600N and Network Places can't see other N device

I just replaced my WRT350N with a WRT600N. After install, my wired desktop cannot "see" in Network Places my other Desktops Shared Drive which has a Linksys WUS300N. This Desktop (with WUS300N) is able to access the internet wirelessly and all settings in router are default. In addition, my wired desktop can "see" all other G devices in "Network Places", but just can't "see" the WUS300N device in Network Places. Once I put the WRT350N back, all devices can be seen in Network Places. Shut down WRT600N, restarted all units, shut off/on sharing, turned firewalls off...no change
My wired desktop is Vista Premium 32 Bit
My wireless desktop is XP Home Edition

I replaced my WRT350N with the WRT600N too because of all the problems with the 350N and to have the dual band as most of my laptops have wireless N cards. I have not had any problems with this router other than only being able to access my USB Tera drive with my XP machines using ftp, if I try to search for it under network neighborhood as I do on my Visa machines and it only brings up default and it won't let my access my share that I created even with the user I created as an admin on the router to access the USB drive share, but since I can access it using ftp I am not concerned at all and otherwise this router is letting all my N wireless cards including the intel 4965N connect at 270Mbps all the time at the same time 3 other laptops that my kids use are connected too with wireless G cards, so I am a happy camper so far.

I can't see my removable device.

I have xfce4 interface installed and pretty much everything.
It runs smooth, and fine.
But today when I try to use my USB stick to transfer some files, I can't see the removable device (USB Stick) in my file manager. ( Looked in cd home, and filesystem.)
Can someone help me how to make my removable device to show up.
I even used this command # udevadm monitor when my usb was plugged in and when I remove it, i get message in the terminal saying "remove blah blah blah".
I believe my usb ports are working fine, but I dont know how to locate my usb stick folder.
Help is appreciated. And please I try searching on google plus even forums, and can't understand or find the solution for it.

This is the output I got when I typed "dmesg | tail -20"
[ 74.331797] wlan0: RX AssocResp from 00:27:3a:f5:ee:34 (capab=0x431 status=0 aid=3)
[ 74.331801] wlan0: associated
[ 127.497316] NET: Registered protocol family 10
[ 223.259055] usb 2-1.3: USB disconnect, device number 3
[ 225.956633] usb 2-1.3: new high speed USB device number 4 using ehci_hcd
[ 225.980187] hub 2-1:1.0: unable to enumerate USB device on port 3
[ 226.173222] usb 2-1.3: new high speed USB device number 5 using ehci_hcd
[ 226.280429] scsi5 : usb-storage 2-1.3:1.0
[ 227.280002] scsi 5:0:0:0: Direct-Access pqi IntelligentStick 0.00 PQ: 0 ANSI: 2
[ 227.281271] sd 5:0:0:0: [sdb] 15771720 512-byte logical blocks: (8.07 GB/7.52 GiB)
[ 227.281763] sd 5:0:0:0: [sdb] Write Protect is off
[ 227.281772] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 227.282285] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 227.282292] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 227.285682] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 227.285687] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 227.702336] sdb:
[ 227.705046] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 227.705053] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 227.705057] sd 5:0:0:0: [sdb] Attached SCSI removable disk
p.s Thx for all your replies.
And I do manually load my xfce interface.
When I boot the computer it does not go straight to xfce interace.
I have to manually load it by typing "startxfce4"
And I dont know what you mean by manually mounting it.

I can't see my usb devices on my desktop.

i can't see my usb devices on my desktop. i tried to restart and re-plag but it doesn't show up. help?

Welcome to Apple Support Communities
That's normal. You have to set up Finder to show external drives on Desktop.
To do this, open a Finder window, go to Finder menu (on the menu bar) > Preferences > General, and mark "External disks"

How can I see how many devices are registered in my Apple Account and/or Apple ID?, How can I see how many devices are registered in my Apple Account and/or Apple ID?

How can I see or determine how many devices are registered in my Apple Account and/or Apple ID?

Sign in here and check:
https://daw.apple.com/cgi-bin/WebObjects/DSAuthWeb.woa/wa/classicLogin?appIdKey= 58ef9db8ff4d201409e7270a68e4408ae1678e1618204c476572a1b5e5fb3518&path&language=U S-EN

How can I see my USB device in the measurement&automation explorer?

I'm trying to use an USB-device with LabView7.0.
I followed the manual "using NI-VISA3.0 to control your USB device" which I found on the NI-webpage.
I generated an .inf file using the VISA driver developement wizard and installed it in the INV folder of my system (I'm using Win2000).
The following problems occured: after I connect my USB device the "add new hardware wizard" pops up and aks for a driver for the new hardware. when I direct it to the folder with the generated .inf file it doesn't accept this file as a driver.
second: the USB device doesn't appear in the measurement&automation explorer. I assume that as long as my device doen't appear there it is not recognized by NI-VISA and the comm
unication from LV wouldn't work?
How can a make my USB device visible in the meas.&aut. explorer?
Regards
Tobias

Tobias,
In the VISA Driver Development Wizard, you are required to specify the Vendor and Product ID. These numbers are what Windows will use to determine whether a specific driver is appropriate for a given device. If these numbers do not match between your device and the Windows driver (INF file) that you generate, you will see the behavior that you describe. Check to make sure that you are using the appropriate values. Also, did you right click on the INF file and install it as directed in step 2.2.2?
Page 5-87 of the VISA Programmer's reference manual specifies how to do a viOpen to a USB device in RAW mode, but you still need the same sorts of Product ID and Mfg ID that you needed for the INF file generation. Furthermore, if you are communicating with
your instrument directly, you will need to know exactly what command set it expects, so make sure you get that from the manufacturer as well. Finally, I want to mention that if this device complies with the USBTMC standard, then none of this is necessary--the steps above are for setting up a RAW USB connection. See this link for information.
Scott

Can't see any shared devices within my network, only devices that aren't in my network.

One of my students updated to Mavericks. Since then she hasn't been able to see shared devices on our network, most importantly, our Mac server that we use for file storage. We're in a protected wireless network that only people from our department can sign in to. She can however see a couple of dozen computers from outside of our network, but nothing from within ours.
I deleted the entry for our wireless network in the Keychain, thinking that maybe a setting within it got corrupted. Didn't resolve the issue.
Any ideas?

It's worth double checking the device is on the correct network.
See if the IP address is correct for the network range and you see the correct router etc. Bonjour is a broadcast service, so it doesn't usually cross networks and subnets unless that has been configured to do so.
It could be that another remembered network is being used instead of the protected one.
If you can open Terminal you can try flushing the local cache…
dscacheutil -flushcache
You can also see if she has 'mdns' records for your server (assuming afp is running) via …
dns-sd -B _afpovertcp
You will need to hit ctrl+c to exit this tool.
Bonjour Browser is easier to use to see records, but it would need installing.
http://www.tildesoft.com/

Can't see my Firewire devices

I have a iBook G4 with 10.5.01, I can no longer see my firewire devices. I have two external hard drives and a CD/DVD player/burner. I have fooled around with moving the cables and tryed it with only one hard drive - nothing - can't see a thing. This is something new. I recently updated Toast Titanium to 8.0.3. On the system preferences network page - it doesn't see the firewire devices and I have no idea what DHCP is. (It says Built-in Firewire is not connected. Does this mean I have a computer hardware problem?) Any suggestions?

Unless your on a network, that message is normal. Hooking up FW devices to your machine is local, not network. For your problem, see http://docs.info.apple.com/article.html?artnum=88338 and http://www.macfixit.com/article.php?story=20041221081432908

Can't see iphone in 'devices' on my imac

I can't see my iphone in 'devices' on my imac when I connec the two with usb cord. Can only locate it by signing into itunes. Can't move music from my imac to my iphone. Help please!

Hi,
iPhone requires iTunes to sync.
http://support.apple.com/kb/HT1386
http://www.apple.com/uk/support/iphone/syncing/
Jim

Can't see the entire devices window

I have the latest version of iTunes. If I go to preferences, then Devices or Advanced, I can't see the entire window. For example, in Devices, the first check box and the letters Dev are not visable, and appear to be to the left of the left edge of the window. I can't check the check box!
Thanks, DIS

You MAY have a corrupted preferences file
Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
-except delete file in P6 http://forums.adobe.com/message/4644893
-and setting http://forums.adobe.com/thread/1058426?tstart=0

Airport Utility can't see all my devices after new cable modem

Everything worked fine until I got a new cable modem from Comcast—it's a Cisco DPC3000. Now after firing that up, I can get to the web on my Mac Pro but my LAN seems to be missing. Airport Utility can see the AEBS (Base Station) that's connected to the cable modem but it can't see a second AEBS that's in my wife's office (wired to the Base Station in Bridge mode), or an Airport Express that's hooked up to my music system, or a second Airport Express that's used to extend the WIFI to a second bedroom. All these things worked fine previously—I could see them all in Airport Utility and I could access all those devices.
Any ideas will be much appreciated—been dealing with this most of the day.
Thanks
Peter

Well what do you know...after a week, it just magically decides to work, without even using Airport Utility.
Boy are these Airports touchy....and unreliable.
I still want to know: What makes these things drop in and out???

Time capsule appeared on Finder on both "shared" and "device". now i can't see it on devices

time capsule appeared on Finder on both "shared" and "device".now i can't see it on devices

It will only appear in devices if you mount the drive. This should happen automatically when Time Machine starts.. but you can manually mount the share by just clicking it.

Premier CS3 can't see Pinnicle Studio device

Similar Messages

Maybe you are looking for