Premier Pro 2014 will not launch

I've downloaded Premier Pro 2014 and tried to launch it, but it freezes every time and won't even force quit. I have to hard crash the whole computer to get out of it.
I've tried reinstalling, setting the permissions to read/write in the Adobe folder in the library, and tried to reset the preferences on launch as described here. But nothing works.
Also I'm having basically the same problem with After Effects 2014.
I think it has something to do with Media Core, but I can't figure out how to remedy. Earlier versions of PP CC and AEP CC are both working fine. Just these new versions will not launch.
Any help would be greatly appreciated.
Computer is a MacPro, 2.93 Ghz Quad-Core with 10GB of RAM.
Thanks!

It's working! Yay!
Strangely, there is no 8.0 folder in the Plug-ins folder. So I pulled the plugins out of the 7.0>MediaCore folder and then was able to launch PP 2014. After getting it running. I quit PP and dragged the plug-ins back into the 7.0>MediaCore folder and was able to launch PP 2014. And this time it launched with all the plug-ins.
I was also able now to launch After Effects CC 2014 with all its plug-ins working.
Is it possible there's a different file structure for PP 2014 Plug-ins?
Anyway it's working. Thanks for your help.

Similar Messages

My trial ended, now my premier pro file will not open on a different machine (it has opened on this machine before). It is saying the "file is damaged" I don't want to loss my edit, how can I access it?

My trial ended, now my premier pro file will not open on a different machine (it has opened on this machine before). It is saying the "file is damaged" I don't want to loss my edit, how can I access it?

Steven is correct, you never can go back to an earlier version with Adobe Premiere with the project file. If your preceding version was CC you might try the trial version of CC 2014, but remember that once you enter the trial version cycle you never can go back.
There was a way to hack the project file on the CS versions but that disappeared with CC.

My adobe premier pro CS6 will not install

Hi there
I am trying to install the adobe premier pro cs6 trial version, when I go through the set up, it say's that Adobe Encore CS6 and Adobe Premier pro CS6 do not meet os requirments, 64 bit os recommended.
I really don't have much idea what that means or if there is a way around it etc. is there another version of the trial that doesn't require 64 bit? My computer is operating a 32 bit system.
thanks
Bex

Unfortunately not.
Premiere Pro CS6 and Encore CS6 are 64 bit only. They will not run on your machine.
http://www.adobe.com/au/products/premiere/faq.html#64bit-support
You could have a look at Premiere Elements which runs on 32 bit and 64 bit.
http://www.adobe.com/au/products/premiere-elements/tech-specs.html

Studio Pro 3 will not launch

I just installed it on my new MacBook Pro 2.4 and it will not launch. Worked fine on my 2.33 MacBool Pro that was stolen. Any ideas?

I'm surprised that you actually got it to work on the previous MacBook. DVDSP3 is not built to run on an Intel processor. Unfortunately, I'd suggest upgrading to DVDSP4 Universal Binary, or even going all the way to FCS2. You may get it to work, but since it isn't in the specs, Apple won't help you support it.

Premier Pro CS4 will NOT EXPORT

I have just installed the CS4 Premier Pro and have a really strange problem.
When I select File/Export/Media the dialogue Box comes up asking for my format preferences, location of saved file etc but when I hit OK a very brief small dialogue box comes up "Exporting Data".
But no file is exported.
Whats happening?

>it cannot find the file
Are you getting the "
Encoding Failed Could not read from the source" message?
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

Quicktime pro upgrade will not launch

Upgraded to pro about 6 weeks ago and followed the procedure for such. I can only launch QT player and QT Pro is "grayed out". I do have the code. Any help would be much appreciated.

Make sure you're entering in both the user name and key code exactly as in the email Apple sent you. Any error in either, including leaving off a salutation (for instance, if the email says "Mr. John Smith") will cause the registration to error.
Also make sure you purchased a key for the correct platform (Windows or Mac). QuickTime keys are not cross-platform.
Hope this helps.

Adobe acrobat pro 9 will not launch-

Gives error message"adobe acrobat was installed as part of a suite-to enable adobe acrobat,please start another component of this suite" I have deleted the photoshop from the suite as I have done to the cloud version of photoshop..I have the serial number of the initial suite…do I delete this version of acrobat pro and reinstall?? if so where do I get the download??Any help is appreciated..

if you have a suite license, you must use the suite installation files (even if you only want one program from the suite).
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Dreamweaver CC 2014 will not launch on Mac OS 10.10

When I try to launch Dreamweaver the icon will bounce 2 times on the dock then nothing happens. Please let me know if there is a fix for this?
MacBook Pro 15"
2.4 GHz Intel Core i7
Memory: 16 GB 1600 MHz DDR3

Hi,
Please try recreating the preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
in case it doesn't help then please delete all the files at the location : /Users/<current user>/Library/Logs
Then try relaunching Adobe Dreamweaver again.
It will create these three files PDapp.log , amt3.log and oobelib.log on the location /Users/<current user>/Library/Logs
Collect these files and send to me over a private message.
Regards,
Devendra

Pro Tools will not launch following power cut during installation

Having just bought an mbox 2 I installed the version of Pro Tools 7 that it came with. Once installed, I opened up the demo project to check that everything worked okay and this was successful. I then downloaded the free upgrade to Pro Tools 8 that was e-mailed to me having registered my copy of Pro Tools 7. During the installation, my house suffered a power-cut. When I relaunched it, two error messages came up on the screen about the mbox and one other product which I hastily clicked 'fix' to. Unfortunately I cannot remember what these were but I think it mentioned something about start-up. I then uninstalled Pro Tools and re-installed Pro Tools 8 and every time I launch it it crashes saying 'Pro Tools quit unexpectedly'.
Unsuccessful troubleshooting attempts:
-Tried uninstalling and re-installing, verying a disk repair after each attempt
-Tried restarting several times
-Tried unplugging the mbox 2 before installing/uninstalling with no success
-Tried installing both Pro Tools 7 and 8 with the same results.

Joey, does it have an uninstaller?
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If that doesn't work we may have a munged OS component.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

InDesign CC 2014 Will Not Launch

I am running Windows 8.1, and I have been trying to get InDesign CC 2014 to work all night. I looked up on these forums possible solutions, but they either do not work, or do not apply. When I attempt to delete preferences to make it work, the folder is empty and has nothing to delete. I also ran the Cleaner tool, but when I check the report, it says it failed. I am at a loss. Does anyone have other solutions?

The problem here is the installer failed to set the permissions on the preference folders, so ID cannot write them (which is why they aren't there). Find the two Adobe folders under Appdata/local and appdata/roaming and set both System and your user to full control for the folder and subfolders.

FaceTime Will Not Launch or Connect

Ever since installing the latest update of FaceTime on my MacBook Pro, it will not launch.
Everytime I try to launch it, I get the below error message:
"You have been disconnected from FaceTime services.
An internal error occured that disconnected you from all FaceTime services. To resume using FaceTime, quite and relaunch FaceTime."
I've tried quitting and restarting, I've tried deleting the .plist file, I've deleted and re-installed, and I nothing changes. I get the error message every single time.
Can anyone help?

We are not the only two people having problems. MANY people have left comments on the Facetime app page. I ended up contacting Facetime support, (click on Express Lane, fill out your info and have them call you immediately) and we were able to fix the problem. That would be my recommendation. Basically there is something wrong with the update, so it has to be uninstalled and reinstalled. I had placed it in my trash before to uninstall, but had not emptied the trash (that was the key for me). From there, I went to the App store, clicked on purchases, located Facetime and reinstalled it. After testing the program, it worked as before. I hope that helps.

Itunes will not launch after latest update 2/2014

Just installed latest update for iTunes on 2/21/2014 on my MBP running snow leopard and after restarting MBP iTunes will not launch.
Thank you
MacBook Pro
Late 2008 unibody running Snow Leopard 10.6.8

Yes, first, I would run Disc Utility; Verify Disc, Verify Disc Permissions, & Repair Disc Permissions.
Then I would go here > http://www.apple.com/itunes/download/ for the .dmg file download.
Then I would reinstall iTunes. So, unless you do not have enough free space on your hard drive, that should work.
Otherwise, it may be time for some spring cleaning...
Regards,
mm~

I have bought a single App Premiere Pro in creative cloud and installed and downloaded my app, but the App will not launch

I have bought a single App Premiere Pro in creative cloud and installed and downloaded Premiere Pro, but the App will not launch.

Hi There,
We would appreciate if you could provide us the below mentioned information so that we can assist you appropriately.
OS Version:
Have you used Premier Pro as trial before?:
Error message/screenshot<if any>:
Thanks,
Atul Saini

MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

Hi David. I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help. I often find that my SD card will not load when I first insert it. I have to remove it and then put it into the slot again firmly.
You also haven't posted any information about the SD card. What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)? This sort of information will help to narrow down the problem.
If you post some more information I'm sure people will try to help you. In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
Hope that helps.
Ivan

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

Premier Pro 2014 will not launch

Similar Messages

Maybe you are looking for