Premier Very Slow, Locking up AND intermittant garbled audio
Wow that's a bunch but I am having real problems suddenly.
Seems like whenever I walk away from premier Pro I come back and my mouse won't work, system is locked and I have to reboot hard!
Prior to this I was having a new experience where one time i would open a sequence and the audio was scratchy, the next time I would open it and it would be fine. This is still happening as well.
Whenever I go out to another program or look at a file on my system and come back to Premier Pro I get the little working circle for about 30 seconds.
I use a scratch disk which is only half full and my hard drives are enjoying plenty of room on them....
I have an I7 12GB Ram, NVidia 285 Video CArd, and when the system is working it is like a rocket, but right now....S-L-O-W...
Help I am stuck on a very large project and need help!!!
Charles
Thanks. I am curious. When I do that, and then go back to open my projects, will they refer to the same locations for files or will I have to re-connect them, and will my scratch disks holding project info still be relevant?
As an additional question, I really don;t know when and how often I can eliminate the scratch disk data. How long is it useful? The entire duration of a project? Once completed can I delete it?
Such a rookie question I imagine. Thanks for your feedback!
Charles
It's all the driver info that drives me crazy when doing the OS...
Similar Messages
-
hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??
Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Open and Save Dialogs Very Slow to Open and Populate
In all of my apps, the Open and Save dialogs have become +very slow+ to open and populate since installing Snow Leapoard.
This only happens on one of my machines, and not others. (I've unmounted all connected drives, just to eliminate that possibility.)
Any thoughts on what this could be. The delay is significant (and feels like the old days of Windows, which I thought I'd left behind).The problem now appears to have gone away. The only change I've made is that I replaced an external drive that had recently died with a new one and gave it the same name as the failed drive.
Could a the dead drive have left something behind (or failed to leave something behind) that is stumbled over (or looked for and not found) each time the file system was accessed, and that got cleaned up (or re-created) when the new drive was connected and renamed? -
PS CC 2014 very slow to load and operate after 2014.2 update
I updated my Photoshop CC 2014 64bit today. It was working perfectly up to the update. Since the update, PSCC 2014 has been very, very slow to load and slow in use. I have uninstalled PS used the PS Cleaner and reinstalled through CC Desktop. The speed problem remains. Interestingly, 3D is the Menu feature that seems to take the longest to load. In other words, the program eventually loads, but 3D appears 6 or 7 seconds later. I don't know if this is significant. The setup was working fine up to the update.
Grateful for any ideas about what may be the problem and what I can do about it.
My system is a 3770K, with 32Gb ram, x4 SSDs one dedicated to OS and programs and the others to data, and an Asus GTX660 (2Gb) graphics card. I am using the latest driver from the Nvidia site. OS is Windows 7 64bit.
I am getting no error messages - just great sluggishness.
Thanks.Sorry for the delay in responding. I had to get some sleep.
Changing "sniffer" made no difference I'm afraid. I have put it back to "sniffer.exe" having tried reopening with "~sniffer" twice with no success.
Resources. The maximum cpu resource used during the period from clicking the desktop icon to the menus in the program becoming usable is 23%.
At the end of the splash screen when "initializing panels" is briefly on the splash screen, the line for the resource meter for the cpu went red and said "not responding" - the red disappeared once the workspace was active:
Do you need anything more? -
CS4 File info dialog very slow to open and respond.
CS4 File info dialog very slow to open and respond. Every click or or key stroke takes more than 1 second to record. I have try multiple changes in the performance preferences and nothing has an affect. This is the only dialog box in the program that has the problem. The problem started when I uninstalled and reinstalled because of problems with the program freezing. I have changed every setting in the preferences performance section back and forth including 3 different amounts of memory usage (lo hi and recommended) restarting PS every time and nothing works. I would appreciate any help, keeping in mind that there have been no changes to the PC and it worked fine for a long time (approx 1/12 years) previous to the reinstall. Lenovo H420 windows 7 64bit 8gb ram 1gb HDD
I've been having the same problem now for a few weeks and its killing me. Not sure what I can do, but in Photoshop and Bridge, the only programmes I use on a daily basis, it takes me forever to enter file information.
My specs are:
eMachines ET-XXXX
Windows 7 Home Premium
4GB RAM
500GB HDD -
MacBook suddenly very slow to start and operate
Sudenly last week my MacBook becomes very SLOW to start and to operate. Until last week it was working fine.
I do not believe to have perform anything abnormal and what is new is just the normal updating of the Softwares that is performed automaticlly every week.
I tried to shut down and restart several time.
I tried several time to reinstall Mac OS 10.6.8
I checked the hard disk with Disk utility and it results OK.
What to do ?
Thanks
MarcRight or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
Why Is My Mac Running So Slow? [MacRx] | Cult of Mac -
Macbook pro late 2011, completely messed up, a macbook pro of this year should not be operating like this, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?
You have a hardware problem. It is probably the hard drive is either to full, not enough free space, or it is starting to fail.
If you have an external drive connec that to the system and use the Recovery HD, Command + r keys at startup, to install a clean fresh copy of OS X Lion on the external then run the system from that. It will be slower but if you don't get the beachball then that is the sign your internal drive is on its way out or is filled up with files and not enough free space. -
HP Thin Client - Easy Tools - Very slow image download and failure!
Hello folks!
We recently acquired 30x HP t520 Thin Client. At this time, we've already set up our vdi solution (server) and we are trying to config our clients. Unfortunately, we can not update OS image. The download is very slow... and gets stuck, getting this message:
"Could not retrieve infromation from server"
(Click in the image to enlarge)
I have found out the ftp adress for the .ibr image
ftp://ftp.hp.com/ftp2/pub/tcimages/EasyUpdate/Images/t520/
[WES7E-32 Image 14WWZDCE301 English (Nov 2014)]
Description=WES7E-32 Image 14WWZDCE301 English (Nov 2014)
File=../7EZDCABA1109VIAFBedoc_flash.ibr
Size=4669729199
OSVERSION=WES7
Release Notes: ftp://ftp.hp.com/ftp2/pub/tcimages/EasyUpdate/Images/7EZDCABA1109VIAFBedoc_flash.TXT
Image File: ftp://ftp.hp.com/ftp2/pub/tcimages/EasyUpdate/Images/7EZDCABA1109VIAFBedoc_flash.ibr
Why the download is very slow? Is there any alternative method for update the system image? It is possible to upgrade for Windows Embedded 8.1?Hi,
HP doesn’t have an official presence on this forum other than for administration and moderation. The assistance that you receive is mainly from volunteers.
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
my iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?
i try to downgrade to 6.1.3 but its not possiblehttp://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
Downgrading isn't supported by Apple, sorry. -
Firefox works very slow on startup and going to webpages. Why?
When I had firefox before it worked very fast. It was great. Since I installed Windows 7 it has started working very slow on startup and when going to webpages. In fact I always have to wait for it to move. Very poor results. What is the problem?
Also, don't ask me about Firefox 4; this is a real piece of crap. I tried it and deleted it. I am back to using 3.When I had firefox before it worked very fast. It was great. Since I installed Windows 7 it has started working very slow on startup and when going to webpages. In fact I always have to wait for it to move. Very poor results. What is the problem?
Also, don't ask me about Firefox 4; this is a real piece of crap. I tried it and deleted it. I am back to using 3. -
Very Slow Internet Connection and Backups
I have had a Time Capsule for some time now (1st generation) and it has caused nothing but headaches. I have put up with it for some time but I have a very slow internet connection and cannot leave Time Machine on or it bogs down my machine, so I only backup periodically. Specifics are provided below.
I have a poor internet connection to begin with. When plugged in directly either to my modem or through Ethernet to the Time Capsule, I get download speeds of ~ 2.9 Mbits/sec download, 0.7 Mbits/sec upload. When connected over wireless, the speeds drop to about 0.6 Mbits/sec download, 0.6 Mbits/sec upload. I feel like I am working on dial-up. I have both a Mac and a PC, and speeds are the same on both, so it does not appear to be a computer issue. I have played with various settings in the Airport, including how connected (b-n or n only), DHCP settings, etc, but nothing makes a difference. Any suggestions?Welcome to the discussion area, bigbrianb!
Have you downloaded a utility like iStumbler to get a look at the signal strength and noise on your wireless network?
iStumbler will display most of the other wireless networks around you, so you'll have an idea of the competition for unused channels. Ideally, you want your network to be on a channel that is at least 4-5 channels away from any other network to minimize the chances of wireless interference. Is that the case there?
Your signal strength should be 50% or greater and noise less than 10% for a good quality connection on your network. Is that the case there?
There are more things to test, but this will get things going. -
Firefox browser very slow signing in and moving from one website to another
firefox browser very slow signing in and opening different websites.
== Operating system ==
Windows xpHello BJ.
This kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
#run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#try reinstally Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
#clean up your OS registry, using appropriate software. If this doesn't do it, I'm out of ideas. Except make sure you've followed my instructions correctly. -
Snow Leopard - very slow restart / reboot and Boot Camp restart fail
Hi
After Snow Leopard installation on my Macbook Pro I have a very slow restart. I logged this immediately after install and waited till 10.6.1 was issued and installed but still have the same problems. Hope some one can help.
For an normal restart or reboot I have the grey screen for about 25 secs and then the blue screen hangs for about 2 mins 30 secs before loading desktop. This is longer than Leopard and clearly not what Snow Leopard is meant to be. I have installed on an iMac as well and can see the new normal fast boot.
I also have Windows on it's own partition and use in Boot Camp. I have used this successfully under Leopard.
When I restart from Windows using the Start button and restart, Windows shuts down and then the mac starts up but gets stuck indefinitely on the blue screen. I have waited up to 25 mins then forced a shut down.
However if I restart from Windows using the Boot Camp icon in the taskbar and choose the restart from MacOSX it shuts down windows and restarts the mac in record time!! about 25 secs grey screen and 25 secs blue screen. I can't get this in normal mac mode! - Bizarre.
I have run Disk Utility, repaired permissions, run Tech Tool, Onyx, reset PRAM, deleted startup items plists and removed startup items from System Preferences Account.
I have monitored the Console app for all the startup conditions noted above and will post below. In the logs of the normal mac reboot you can see something to do with Security Agent taking over 2 mins to load. Maybe that is a clue, but I don't understand these messages. Please note that the iStatsmenu app was installed after snow leopard and I had these slow startups before it's installation.
If anyone technical can understand what the **** is going on here I would really appreciate your feedback.
Regards
Eric
system.log
Sep 13 18:09:01 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Sep 13 18:09:08 localhost mDNSResponder[17]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
Sep 13 18:09:09 localhost pcscd[28]: Non-smartcard device launched pcscd [Vendor: 0X3F0, Product: 0X5711]
Sep 13 18:09:17: --- last message repeated 1 time ---
Sep 13 18:09:17 localhost configd[15]: network configuration changed.
Sep 13 18:09:17 eric-lawrences-MBP-2 configd[15]: setting hostname to "eric-lawrences-MBP-2.local"
Sep 13 18:09:17 eric-lawrences-MBP-2 bootlog[60]: BOOT_TIME: 1252829340 0
Sep 13 18:09:18 eric-lawrences-MBP-2 fseventsd[54]: could not open <</Volumes/ERICGLPC/.fseventsd/fseventsd-uuid>> (No such file or directory)
Sep 13 18:09:18 eric-lawrences-MBP-2 fseventsd[54]: log dir: /Volumes/ERICGLPC/.fseventsd getting new uuid: 493B2D00-47B9-4820-96FB-EF447F07CCDA
Sep 13 18:09:20 eric-lawrences-MBP-2 com.apple.usbmuxd[44]: usbmuxd-176 built for iTunesNine on Jul 20 2009 at 13:06:53, running 32 bit
Sep 13 18:09:20 eric-lawrences-MBP-2 sudo[78]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
Sep 13 18:09:21 eric-lawrences-MBP-2 blued[61]: Apple Bluetooth daemon started
Sep 13 18:09:21 eric-lawrences-MBP-2 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[50]: Login Window Application Started
Sep 13 18:09:24 eric-lawrences-MBP-2 loginwindow[50]: Login Window Started Security Agent
Sep 13 18:09:25 eric-lawrences-MBP-2 iStatLocalDaemon[66]: Waiting for connections on port 5204.
Sep 13 18:09:27 eric-lawrences-MBP-2 mDNSResponder[17]: SIGHUP: Purge cache
Sep 13 18:09:31 eric-lawrences-MBP-2 configd[15]: network configuration changed.
Sep 13 18:11:00 eric-lawrences-MBP-2 loginwindow[50]: Login Window - Returned from Security Agent
Sep 13 18:11:00 eric-lawrences-MBP-2 loginwindow[50]: USER_PROCESS: 50 console
Sep 13 18:11:01 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[121] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Sep 13 18:11:10 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[121] (com.apple.Kerberos.renew.plist[137]): Exited with exit code: 1
Sep 13 18:11:11 eric-lawrences-MBP-2 ServerScanner[134]: Not scanning because node /Active Directory/All Domains is in searchPath
Sep 13 18:11:27 eric-lawrences-MBP-2 com.apple.WindowServer[85]: Sun Sep 13 18:11:27 eric-lawrences-MBP-2.local WindowServer[85] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Sep 13 18:11:27 eric-lawrences-MBP-2 WindowServer[85]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Sep 13 18:11:29 eric-lawrences-MBP-2 SystemUIServer[126]: MenuCracker 2.0 (/Library/Application Support/iStat local/extras/MenuCracker.menu)\n See http://sourceforge.net/projects/menucracker\n MenuCracker is now loaded. Ready to accept new menu extras. Ignore the failure message that follows.
Sep 13 18:11:29 eric-lawrences-MBP-2 SystemUIServer[126]: failed to instantiate and get the principal class of bundle: NSBundle </Library/Application Support/iStat local/extras/MenuCracker.menu> (loaded)
Sep 13 18:11:29 eric-lawrences-MBP-2 SystemUIServer[126]: MenuCracker: Allowing "iStatMenusDateAndTimes".
Sep 13 18:11:36 eric-lawrences-MBP-2 SystemUIServer[126]: MenuCracker: Allowing "iStatMenusNetwork".
secure.log
Sep 13 18:09:08 localhost com.apple.SecurityServer[23]: Session 0x5fbff962 created
Sep 13 18:09:09 localhost com.apple.SecurityServer[23]: Entering service
Sep 13 18:09:17 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Succeeded authorizing right 'config.modify.com.apple.CoreRAID.admin' by client '/System/Library/PrivateFrameworks/CoreRAID.framework/Versions/A/Resources/Core RAIDServer' for authorization created by '/System/Library/PrivateFrameworks/CoreRAID.framework/Versions/A/Resources/Core RAIDServer'
Sep 13 18:09:24 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Session 0x236025 created
Sep 13 18:09:24 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Session 0x236025 attributes 0x30
Sep 13 18:09:24 eric-lawrences-MBP-2 loginwindow[50]: Login Window Started Security Agent
Sep 13 18:09:25 eric-lawrences-MBP-2 SecurityAgent[103]: User info context values set for ericgl
Sep 13 18:09:26 eric-lawrences-MBP-2 SecurityAgent[103]: Login Window login proceeding
Sep 13 18:11:00 eric-lawrences-MBP-2 SecurityAgent[103]: Login Window done
Sep 13 18:11:00 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Succeeded authorizing right 'system.login.console' by client '/System/Library/CoreServices/loginwindow.app' for authorization created by '/System/Library/CoreServices/loginwindow.app'
Sep 13 18:11:00 eric-lawrences-MBP-2 loginwindow[50]: Login Window - Returned from Security Agent
Sep 13 18:11:01 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Succeeded authorizing right 'system.login.done' by client '/System/Library/CoreServices/loginwindow.app' for authorization created by '/System/Library/CoreServices/loginwindow.app'
Sep 13 18:11:09 eric-lawrences-MBP-2 /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[145]: Starting up.
Sep 13 18:11:14 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Succeeded authorizing right 'system.print.admin' by client '/System/Library/Printers/Libraries/makequeuesagent' for authorization created by '/System/Library/Printers/Libraries/makequeuesagent'
Sep 13 18:11:44: --- last message repeated 1 time ---
all messages
13/09/09 6:09:07 PM kernel npvhash=4095
13/09/09 6:09:07 PM kernel PAE enabled
13/09/09 6:09:07 PM kernel 64 bit mode enabled
13/09/09 6:09:07 PM kernel Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
13/09/09 6:09:07 PM kernel vmpagebootstrap: 508922 free pages and 15366 wired pages
13/09/09 6:09:07 PM kernel standard timeslicing quantum is 10000 us
13/09/09 6:09:07 PM kernel migtable_maxdispl = 73
13/09/09 6:09:07 PM kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
13/09/09 6:09:07 PM kernel AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
13/09/09 6:09:07 PM kernel calling mpopolicyinit for TMSafetyNet
13/09/09 6:09:07 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13/09/09 6:09:07 PM kernel calling mpopolicyinit for Quarantine
13/09/09 6:09:07 PM kernel Security policy loaded: Quarantine policy (Quarantine)
13/09/09 6:09:07 PM kernel calling mpopolicyinit for Sandbox
13/09/09 6:09:07 PM kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
13/09/09 6:09:07 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
13/09/09 6:09:07 PM kernel The Regents of the University of California. All rights reserved.
13/09/09 6:09:07 PM kernel MAC Framework successfully initialized
13/09/09 6:09:07 PM kernel using 10485 buffer headers and 4096 cluster IO buffer headers
13/09/09 6:09:07 PM kernel IOAPIC: Version 0x20 Vectors 64:87
13/09/09 6:09:07 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
13/09/09 6:09:07 PM kernel mbinit: done (64 MB memory set for mbuf pool)
13/09/09 6:09:07 PM kernel rooting via boot-uuid from /chosen: DA111E02-C1F5-3C6F-AB90-AD27A5B932BE
13/09/09 6:09:07 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13/09/09 6:09:07 PM kernel com.apple.AppleFSCompressionTypeZlib load succeeded
13/09/09 6:09:07 PM kernel AppleIntelCPUPowerManagementClient: ready
13/09/09 6:09:07 PM kernel FireWire (OHCI) TI ID 8025 built-in now active, GUID 0017f2fffe7f970e; max speed s800.
13/09/09 6:09:07 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/FUJITSU MHW2120BH Media/IOGUIDPartitionScheme/Merged_Untitled@2
13/09/09 6:09:07 PM kernel BSD root: disk0s2, major 14, minor 2
13/09/09 6:09:07 PM kernel USBMSC Identifier (non-unique): MY66AB92R404J7 0x3f0 0x5711 0x100
13/09/09 6:09:07 PM kernel USBMSC Identifier (non-unique): 01974248FFFF 0x59f 0x951 0x0
13/09/09 6:09:07 PM kernel [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
13/09/09 6:09:07 PM kernel [Bluetooth::CSRHIDTransition] transition complete.
13/09/09 6:09:07 PM kernel CSRUSBBluetoothHCIController::setupHardware super returned 0
13/09/09 6:09:07 PM kernel AppleIntelCPUPowerManagement: initialization complete
13/09/09 6:09:07 PM kernel AppleYukon2: Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA
13/09/09 6:09:07 PM kernel AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328
13/09/09 6:09:01 PM com.apple.launchd[1] * launchd[1] has started up. *
13/09/09 6:09:08 PM kernel yukon: Ethernet address 00:16:cb:a1:8f:b7
13/09/09 6:09:08 PM kernel systemShutdown false
13/09/09 6:09:08 PM mDNSResponder[17] mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
13/09/09 6:09:08 PM com.apple.SecurityServer[23] Session 0x5fbff962 created
13/09/09 6:09:09 PM com.apple.SecurityServer[23] Entering service
13/09/09 6:09:10 PM kernel Previous Shutdown Cause: 5
13/09/09 6:09:10 PM kernel DSMOS has arrived
13/09/09 6:09:10 PM kernel Atheros: mac 12.2 phy 8.1 radio 12.0
13/09/09 6:09:17 PM configd[15] network configuration changed.
13/09/09 6:09:17 PM configd[15] setting hostname to "eric-lawrences-MBP-2.local"
13/09/09 6:09:17 PM kernel AirPort_AthrFusion: Ethernet address 00:17:f2:e6:a8:d1
13/09/09 6:09:17 PM kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13/09/09 6:09:17 PM bootlog[60] BOOT_TIME: 1252829340 0
13/09/09 6:09:18 PM fseventsd[54] could not open <</Volumes/ERICGLPC/.fseventsd/fseventsd-uuid>> (No such file or directory)
13/09/09 6:09:18 PM fseventsd[54] log dir: /Volumes/ERICGLPC/.fseventsd getting new uuid: 493B2D00-47B9-4820-96FB-EF447F07CCDA
13/09/09 6:09:19 PM kernel AirPort: Link Down on en1. Reason 1 (Unspecified).
13/09/09 6:09:19 PM kernel AirPort: Link Up on en1
13/09/09 6:09:20 PM kernel AirPort: RSN handshake complete on en1
13/09/09 6:09:20 PM com.apple.usbmuxd[44] usbmuxd-176 built for iTunesNine on Jul 20 2009 at 13:06:53, running 32 bit
13/09/09 6:09:20 PM sudo[78] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
13/09/09 6:09:21 PM blued[61] Apple Bluetooth daemon started
13/09/09 6:09:21 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[50] Login Window Application Started
13/09/09 6:09:22 PM kernel Warning - com.apple.driver.InternalModemSupport declares no kernel dependencies; using com.apple.kernel.6.0.
13/09/09 6:09:23 PM kernel IOBluetoothBNEPDriver: Ethernet address 00:17:f2:9f:b7:a5
13/09/09 6:09:24 PM com.apple.SecurityServer[23] Session 0x236025 created
13/09/09 6:09:24 PM com.apple.SecurityServer[23] Session 0x236025 attributes 0x30
13/09/09 6:09:24 PM loginwindow[50] Login Window Started Security Agent
13/09/09 6:09:25 PM Firewall[100] krb5kdc is listening from :::88 proto=6
13/09/09 6:09:25 PM Firewall[100] krb5kdc is listening from 0.0.0.0:88 proto=6
13/09/09 6:09:25 PM Firewall[100] iStatLocalDaemon is listening from 0.0.0.0:5204 proto=6
13/09/09 6:09:25 PM Firewall[100] iStatLocalDaemon is listening from ::ffff:0.0.0.0:5204 proto=6
13/09/09 6:09:25 PM SecurityAgent[103] User info context values set for ericgl
13/09/09 6:09:26 PM SecurityAgent[103] Login Window login proceeding
13/09/09 6:09:27 PM mDNSResponder[17] SIGHUP: Purge cache
13/09/09 6:09:31 PM Firewall[100] krb5kdc is listening from :::88 proto=6
13/09/09 6:09:31 PM Firewall[100] krb5kdc is listening from 0.0.0.0:88 proto=6
13/09/09 6:09:31 PM configd[15] network configuration changed.
13/09/09 6:09:35 PM Firewall[100] krb5kdc is listening from :::88 proto=6
13/09/09 6:09:35 PM Firewall[100] krb5kdc is listening from 0.0.0.0:88 proto=6
13/09/09 6:11:00 PM SecurityAgent[103] Login Window done
13/09/09 6:11:00 PM loginwindow[50] Login Window - Returned from Security Agent
13/09/09 6:11:00 PM loginwindow[50] USER_PROCESS: 50 console
13/09/09 6:11:01 PM com.apple.launchd.peruser.501[121] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
13/09/09 6:11:10 PM com.apple.launchd.peruser.501[121] (com.apple.Kerberos.renew.plist[137]) Exited with exit code: 1
13/09/09 6:11:11 PM ServerScanner[134] Not scanning because node /Active Directory/All Domains is in searchPath
13/09/09 6:11:27 PM com.apple.WindowServer[85] Sun Sep 13 18:11:27 eric-lawrences-MBP-2.local WindowServer[85] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
13/09/09 6:11:27 PM WindowServer[85] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
13/09/09 6:11:29 PM SystemUIServer[126] MenuCracker 2.0 (/Library/Application Support/iStat local/extras/MenuCracker.menu)
See http://sourceforge.net/projects/menucracker
MenuCracker is now loaded. Ready to accept new menu extras. Ignore the failure message that follows.
13/09/09 6:11:29 PM SystemUIServer[126] failed to instantiate and get the principal class of bundle: NSBundle </Library/Application Support/iStat local/extras/MenuCracker.menu> (loaded)
13/09/09 6:11:29 PM SystemUIServer[126] MenuCracker: Allowing "iStatMenusDateAndTimes".
13/09/09 6:11:36 PM SystemUIServer[126] MenuCracker: Allowing "iStatMenusNetwork".
failed reboot from windows - note date and time wrong
Sep 13 19:00:10 eric-lawrences-MBP-2 sudo[200]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
Sep 13 19:00:10 eric-lawrences-MBP-2 WindowServer[85]: bootstraplookip failed: Unknown service name
Sep 14 05:26:46 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Sep 14 05:26:53 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
Sep 14 05:26:54 localhost pcscd[28]: Non-smartcard device launched pcscd [Vendor: 0X3F0, Product: 0X5711]
Sep 14 05:27:02: --- last message repeated 1 time ---
Sep 14 05:27:02 localhost configd[14]: network configuration changed.
Sep 14 05:27:02 eric-lawrences-MBP-2 configd[14]: setting hostname to "eric-lawrences-MBP-2.local"
Sep 14 05:27:02 eric-lawrences-MBP-2 bootlog[62]: BOOT_TIME: 1252870005 0
Sep 14 05:27:03 eric-lawrences-MBP-2 fseventsd[56]: checkvol_last_modtime:XXX failed to get mount time (25; &mount_time == 0x1000b5358)
Sep 14 05:27:03 eric-lawrences-MBP-2 fseventsd[56]: log dir: /Volumes/ERICGLPC/.fseventsd getting new uuid: 1C45E673-8EEA-4ACF-B0F2-BAE1FB843D2B
Sep 14 05:27:05 eric-lawrences-MBP-2 com.apple.usbmuxd[46]: usbmuxd-176 built for iTunesNine on Jul 20 2009 at 13:06:53, running 32 bit
Sep 14 05:27:05 eric-lawrences-MBP-2 sudo[82]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
Sep 14 05:27:06 eric-lawrences-MBP-2 blued[63]: Apple Bluetooth daemon started
Sep 14 05:27:06 eric-lawrences-MBP-2 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[52]: Login Window Application Started
Sep 14 05:27:11 eric-lawrences-MBP-2 iStatLocalDaemon[68]: Waiting for connections on port 5204.
Sep 14 05:27:11 eric-lawrences-MBP-2 configd[14]: network configuration changed.
Sep 14 05:27:12 eric-lawrences-MBP-2 mDNSResponder[18]: SIGHUP: Purge cache
Sep 14 05:27:12 eric-lawrences-MBP-2 loginwindow[52]: Login Window Started Security Agent
Sep 13 19:33:18 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Sep 13 19:33:25 localhost DirectoryService[11]: Improper shutdown detected
Sep 13 19:33:39 localhost mDNSResponder[17]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
fast reboot from boot camp icon in Windows - note date and time wrong
Sep 14 05:46:42 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Sep 14 05:46:53 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
Sep 14 05:46:53 localhost pcscd[31]: Non-smartcard device launched pcscd [Vendor: 0X3F0, Product: 0X5711]
Sep 14 05:46:54: --- last message repeated 1 time ---
Sep 14 05:46:54 localhost configd[15]: network configuration changed.
Sep 14 05:46:54 eric-lawrences-MBP-2 configd[15]: setting hostname to "eric-lawrences-MBP-2.local"
Sep 14 05:46:56 eric-lawrences-MBP-2 configd[15]: network configuration changed.
Sep 14 05:46:57 eric-lawrences-MBP-2 bootlog[65]: BOOT_TIME: 1252871201 0
Sep 14 05:46:58 eric-lawrences-MBP-2 configd[15]: network configuration changed.
Sep 14 05:47:01 eric-lawrences-MBP-2 fseventsd[59]: could not open <</Volumes/ERICGLPC/.fseventsd/fseventsd-uuid>> (No such file or directory)
Sep 14 05:47:01 eric-lawrences-MBP-2 fseventsd[59]: log dir: /Volumes/ERICGLPC/.fseventsd getting new uuid: CA5F549C-7E51-4D0B-BEB6-7B91A7544AE2
Sep 14 05:47:01 eric-lawrences-MBP-2 sudo[82]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
Sep 14 05:47:03 eric-lawrences-MBP-2 com.apple.usbmuxd[49]: usbmuxd-176 built for iTunesNine on Jul 20 2009 at 13:06:53, running 32 bit
Sep 14 05:47:03 eric-lawrences-MBP-2 blued[66]: Apple Bluetooth daemon started
Sep 14 05:47:04 eric-lawrences-MBP-2 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[55]: Login Window Application Started
Sep 14 05:47:09 eric-lawrences-MBP-2 iStatLocalDaemon[71]: Waiting for connections on port 5204.
Sep 14 05:47:09 eric-lawrences-MBP-2 mDNSResponder[18]: SIGHUP: Purge cache
Sep 14 05:47:10 eric-lawrences-MBP-2 configd[15]: network configuration changed.
Sep 14 05:47:10 eric-lawrences-MBP-2 loginwindow[55]: Login Window Started Security Agent
Sep 14 05:47:11 eric-lawrences-MBP-2 loginwindow[55]: Login Window - Returned from Security Agent
Sep 14 05:47:11 eric-lawrences-MBP-2 loginwindow[55]: USER_PROCESS: 55 console
Sep 14 05:47:11 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[109] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Sep 13 19:47:17 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[109] (com.apple.AddressBook.abd): The following job tried to hijack the service "com.apple.AddressBook.abd" from this job: [0x0-0x5005].com.apple.AddressBook.abd
Sep 13 19:47:24 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[109] (com.apple.Kerberos.renew.plist[131]): Exited with exit code: 1
Sep 13 19:47:24 eric-lawrences-MBP-2 ServerScanner[128]: Not scanning because node /Active Directory/All Domains is in searchPath
Sep 13 19:47:38 eric-lawrences-MBP-2 SystemUIServer[114]: MenuCracker 2.0 (/Library/Application Support/iStat local/extras/MenuCracker.menu)\n See http://sourceforge.net/projects/menucracker\n MenuCracker is now loaded. Ready to accept new menu extras. Ignore the failure message that follows.
Sep 13 19:47:38 eric-lawrences-MBP-2 SystemUIServer[114]: failed to instantiate and get the principal class of bundle: NSBundle </Library/Application Support/iStat local/extras/MenuCracker.menu> (loaded)
Sep 13 19:48:03 eric-lawrences-MBP-2 WindowServer[85]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Sep 13 19:48:03 eric-lawrences-MBP-2 com.apple.WindowServer[85]: Sun Sep 13 19:48:03 eric-lawrences-MBP-2.local WindowServer[85] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.Hi guys
Thanks for your contributions. I have made little progress on this issue since posting.
Just as added info, I did a re-install of Snow leopard from install DVD and upgrade again to 10.6.1 and no change to the startup behaviours. Same pattern as before, although the first restart was fast and probably how it is meant to be, then the slow ones reappeared.
I also had a thought that somehow it may be related to the nominated startup disk. There were posts on other boards about similar issues with Leopard where the hanging start was found to be related to the computer not knowing which startup disk to use. I thought maybe as it works when using the boot camp icon from Windows but not the restart button, it may be related, but in OSX and Windows both are set to startup in OSX on HD. So no further joy.
Maybe someone else will come along who can understand the Console logs. Why does the loginwindow and Security Agent take so long?
Do you guys have any clues from your Console system logs? Does yours hang on loginwindow?
The fact that there are so few people with the same problem suggests to me that there is a third party device/preference/ hidden file somewhere that is having an effect and it's not an Apple issue.
I am getting close to wiping the hard drive and starting again....but live in hope.
Cheers -
I have recently transferred my iPhoto Library to my external hard drive (WD MyBook Live) and have some questions. Since I have done this and used the "alt + option" to select it as my default library I have been having some issues. When using the library on the external drive as my default drive it takes a very long time to load compared to when it was on my macbook's hard drive. Is this normal? Also, once it does load the thumbnails are only viewable when scrolling quickly through the photos and they are very blurry. However, if I were to select one randomly (because of this problem I have no way of knowing which one I'm selecting) it brings it up in the edit view and it is a crystal clear picture.
Is there a way to fix these issues? I'd love to be able to use the iPhoto Library off the external drive to free up space on my macbook but if it isn't going to work as streamlined as it would on my macbook hard drive. I have not yet deleted the original iPhoto Library from my macbook because I did not want to do so until I knew the new iPhoto library on the external drive was working properly. Does this make a difference?
Please help!The problem lies with occasional dropouts that can corrupt the library's database files if they are being written to as the time of dropout. It's the nature of wireless networks. If you have a very strong signal throughout and are willing to take a chance then go for it.
But as for the speed, it must be iPhoto 11 and it's complexity causing the slowness. I had tried using a library on an EHD connected to my iMac from my laptop wirelessly with iPhoto 7 or 8 and it was pretty fast. I think it was 7 before faces and places came into being.
Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html to improve wireless performance, etc.
OT -
SI since upgrading to ios8, Safari pages are very slow to load, Kindle crashes upon opening, and I can no longer read saved artices from my reading list when offline. Big disappointment. Is it possible to downgrade to previous ios?
I actually managed to fix it! But unfortunately I don't know what I was that I did that helped.
Anyways, this is kind of what I did.
1. I tried to reset form bakup via iTunes, no change.
2. I tried to reset as a new iPhone, problem still there and reading list also as bookmarks!? (several hundred)
3. Noticed that I could delete a bookmark, once in a while, the other times I got the 'Bookmarks are being synced. Please edit the bookmarks once syncing has completed.' message.
4. Because I figured that it was a memory problem, I thought it made sense to delete as many as possible, witch I did.
5. Noticed that it was more likely that I coould delete a bookmark if I restarted Safari.
6. Notice that it was even more likely that I could delete a bookmark if I turned the Safari sync with iCould off (with option detete information on iPhone) and then back on again.
7. When I was about half way through deleting the bookmark list I suddenly discovered that all but one of the items in my reading list was 'waiting' and one was downloading. I kind of was 'unstuck' now.
8. I started to delete items in my reading list, but every other time I got the 'Bookmarks are being synced. Please edit the bookmarks once syncing has completed.' message.
9. It took a while to delete all bookmarks and items in the reading list.
Hope you guys could use the info here to fix your problems too!
Maybe you are looking for
-
Ok, my family uses one Apple Account and we share music and stuff but when me and my sibling got Iphones like my parents, it got confusing. I was the first to sync my Iphone 4s into the computer and the Apple ID is put under my name. All of my Apps,
-
Which is the best way to edit this program and make it read 1 sample from each channel?
The original program was made with Traditional NI-DAQ. I have edit it to DAQmx the best that i could. The program it's already applying the voltages that are generate in the code(Daqmx Write.vi). But i'm having problems with acquiring voltages it's g
-
How can i find the file to which Session Manager has saved my session ?
How can I find the file to which Session Manager has saved my session ? == This happened == Every time Firefox opened == User Agent == Opera/9.80 (Windows NT 6.0; U; en) Presto/2.5.24 Version/10.53
-
IPhoto deletes pictures when shared
Not that Apple will do anything about this problem that has been going on since iPhoto got the major update, but in shared mode, we imported loads of photos of our beautiful 20 month old son and newborn daughter. And now they are permanently gone. Va
-
New license is not recognized (OSX, Creative Cloud)
Hi, Hopefully someone from Adobe can help me sort this out. I've purchased a Creative Cloud subscription. Now when I start Photoshop CS6 it wants me to enter my serial number. However, when I do so I get a message saying my serial number is not valid