Premiere CC Playback Image Uncompressed MOV BMCC

Hi,
I I was using CS6 with and importing quicktime uncompressed RGB video via resolve, no problems on CS6 (with black magic video desktop installed). I installed Premiere CC and the video does this in the  monitors:
Not sure why, works perfectly in CS6.  Also, tried some regular dslr video, no issue.  Not sure if this is adobe or Blackmagic codec releated. Weird that cs6 has no problem with it but CC does.  I even get the settings for nblackmagic when creating a new sequences.
Any help would be appreciated.
Thanks,
Mike

>Weird that cs6 has no problem with it but CC does
I can't help directly since I don't have CC... but I have read several messages that indicate that going from CS6 to CC will "sometimes-to-often" require device driver updates
The specific messages I remember were about nVidia drivers that worked with CS6 but not CC, so it would not be surprising if Blackmagic also needed an updated driver

Similar Messages

  • Premiere makes imported images & movies blurry

    I have imported a number of video and art files (.mov, .jpg & .png) into premiere and everything I import is blurry in the preview view and when exported. It also does this with any text titles I generate inside premiere. I have it set to the highest quality settings so I'm not sure if there's anything else that I can do to make it look like what it looks like if I open the image or movie outside of premiere, which is nice and sharp.

    par: 16:9
    fields: lower fields first
    dimensions: I can't seem to find the article again but I found an article on resizing a project by hacking the project file and changing the dimensions in it. I did that to try and keep the dimensions proportional to the default 720x480. The reason is because some of my video had stuff in the frames around the edges that I didn't want. The only way to get rid of it was to either scale up the video (which I didn't want to do due to loss of quality) or make the project dimensions smaller. That way I could then scale down the video just enough to crop out the edge stuff.

  • Premiere Pro CS3 - exporting uncompressed AVI renderes black vid - help

    I'm putting together a small demo reel (just under 6 minutes) where the image quality is important above all things.  I was trying to export an Uncompressed AVI movie, 1920x1080 with 16bit 48Hz audio in Pro CS3 (I don't have access to a later version), which seems to work except the video is being rendered black (the final file is 32 gigs).  I tried testing this with a 5 second clip to see if the length or size of the file was causing the problem but it was the same.  The reason I am doing this is that I want to do my codec and burn to DVD in another program (AVS) and need to export the video as pristine as possible,  It didn't seem to make a difference if I chose "uncompressed AVI" or the "Microsoft AVI" and then made sure the video setting were set to uncompressed.  I am sure that the video is alright as I was able to create a "Microsoft AVI" as long as I chose some sort of video compression but then that file is being doubly compressed.
    I had heard mention that Premiere Pro (I am new to this package) should be able to export an uncompressed QT file as well but this option seems unavailable to me in the export options.
    I tried using the Premiere Encoder to go straight to DVD from Premiere (this is not for Blue Ray by the way - I just wanted to master at HD so taht, in the future, when I do re-edit for Blue Ray I'll already have this material worked out for that resolution) but it generates a single Mpeg2 files that my DVD burner doesn't want to use (it seems to want things to be in the VIDEO_TS/AUDIO_TS directory structure).
    Sorry for this layman stuff but any help is much appreciated.
    -Michael

    Thanks Jim,
    I tried None but the images (video) still comes up black.  I've tried
    looking at the final AVI through Premiere itself and also AVS Media
    Player, Editor and a few other programs.  The uncompressed audio is
    there but the video is rendered black (uncompressed black so the files
    are still huge).  All I have to do is change the codec to Cinepak or
    one of the others that are available and suddenly the images are there
    as expected but, unfortunately, the image degradation once this file
    has been converted to High Quality DVD is not acceptable for my
    purposes.
    I'm not sure what other alternatives there are  -- is there a way to
    load additional codecs into Premiere (such as QT uncompressed) so that
    I can give those a shot?
    Thanks for your help on this.
    -Michael

  • Uncompressed MOV format

    I have exported my video in an uncompressed MOV format. My 2 min. video is 16 GB. The problem is that my video jump or are lagging when played. Is there something wrong with the video or is it my computer that can't play such a video?

    Thank you for your answer. I'm making the video to someone else and they
    have asked for a MOV format.
    I have some other questions about exporting from Premiere Elements 11 to a
    MOV format:
    - Do I get a MOV format when exporting in QuickTime?
    - What is the difference between 8 bit and 10 bit? What is the best choice?
    - What is 'Field type - progressive, upper first and lower first'?
    I hope you can help me.
    2013/4/22 Steve Grisetti <[email protected]>
       Re: Uncompressed MOV format  created by Steve Grisetti<http://forums.adobe.com/people/Steve+Grisetti>in
    Premiere Elements - View the full discussion<http://forums.adobe.com/message/5257123#5257123

  • Images I move from one folder into another are disappearing, at first it was occurring immediately if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location.

    Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
    In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?

    Hi Kevin,
    I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
    You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
    Best

  • Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

    Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

    Hi, Tom.
    FYI: You've not stated which of your listed Macs is having the problem. However, the following may help in any case:
    1. Did you install Front Row using the Front Row hack on a Mac that did not ship from the factory with Front Row installed? If so, See my "Uninstalling the Front Row hack" FAQ. This has been known to cause a variety of problems, including the menu bar (Clock, Spotlight) issues you noted.
    2. If you did not install the Front Row Hack, an incompatible or corrupted Startup or Login Item may be partly to blame for the problems with the menu bar. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
    3. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
    4. Re: Safari and Mail, if not sorted by any of the above, see also:• "Safari: Blank icon after installing Security Update 2006-002 v1.0."
    • My my "Multiple applications quit unexpectedly or fail to launch" FAQ
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Error message "Cannot playback image" on Canon 7D using an SDHC card in a CF adapter

    Just purchased a new 32GB 45MB/s Sandisk SDHC card and popped it in my CF card adapter for my Canon 7D camera. Started off doing a few trial shots and worked fine. Tried another day and worked fine at the time (or so I thought) Images all visible on the screen on replay.
    I then went on a trip to London last night and was happily shooting and looking at the images regularly to check what they were loooking like and everything was initially fine. Half way trhougb the shooting I noiced that I suddenly had an error message appear "Cannot playback image". Just tried downloading onto my PC through Lightroom and nothing to be found. Says the images have not been recorded or maybe corrupted.
    Does anyone know
    1) How this could have happened please?
    2) If there is anyway that I can retrieve the files with this message or are they all likely to be either not there or corrupted if they are there?
    ( The second test shoot appeared satisfactory at the time and all the images were visible fine but on loading 50% were corrupted)
    Any help / advice warmly welcomed please
    + Any free Sandisc recovery programs that might help?
    Cheers
    Sue

    You can try here.
    Do not use the card until you try the recovery.  In the future stick with CF cards.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • Playback of iPhoto movies not smooth

    For 5 years I have taken a lot of nice avi movies with my compact Nikon S210 camera.  They always play back very smoothly and are a pleasure to watch directly on my Mac, via a large attached monitor or even to my Apple TV.
    But this past week my daughter purchased a Panasonic Lumix DMC-Z25.  A super camera that records videos in either a "clip" mode or in mp4 format.  Great it would seem, except that when playing back these "movies" in iPhoto (latest version, running 10.8.3 on my MacBook Pro mid-2010) they are jerky-- not smooth.  Sometimes if I play the same video 5 times over, it gets better.  But then I play another one, go back to that one, and it is jerky again.  Same if played with QuickTime.  BUT never a problem with the avi movies taken on my other camera -- only this Lumix gives the jerky playbacks.  Why?
    I am ready to purchase a Lumix but WILL NOT if I am going to have videos like that!
    Best regards,
    Steve Schulte
    Monday 15 April 2013

    Old Toad and TD:  This is the reply from PANASONIC.  NOTE:  They thought I was having problems in iMovie.  I was talking about the latest version of iPhoto.  So I tried iMovie, and all the videos that were choppy in iPhoto played perfectly and smoothly in iMovie.  GREAT-- but I hardly ever use iMovie-- I find it an awkward program to use just to view a few nice short videos…  So fine that it works in iMovie, but I need videos to play in iPhoto.
    My questions after the reply below (to you and I already eMailed these to Panasonic) are:
    Have I possibly set the videos (AVCHD and mp4) to record in 50 fps mode which apparently won't play correctly in iPhoto?  Actually I was trying to record in 50 fps, but when I did INFO in iPhoto it always said 25 fps (but with my old Nikon Coolpix S210 it said 30 fps)
    How can I find the fps info when I import the videos into iMovie?
    They said 50 fps is not supported by iMovie-- but is it?  Perhaps it is supported by iMovie and not iPhoto??
    Panasonic mentions some software/drivers.  Is that something I perhaps need to do?  Attach the camera and install drivers?  How will that work with iPhoto?????
    What else???
    Here's that reply from Panasonic:
    Thank you for your e-mail.
    Regarding your enquiry, thank you for displaying the full problem. As I understand the videos playback perfectly in VLC media player, which means that the video itself is recorded perfectly, and the problem needs to be with the iMovie software that does not fully support the video format. We kindly recommend you contact Mac as this is an issue that they need to solve in order for you to playback properly the movie.
    I hope you can understand my point of view, because if the problem where to be with the DMC-TZ25, the video should have played back choppy using any media player, but given this situation, the problem is only with the iMovie.
    The following information is the only one we have regarding using the DMC-TZ25's software on a Mac computer:
    Please note that 50p footage available on some cameras is not supported by Imovie.
    The supplied software is not Mac compatible.
    Connect the camera to the Mac, selecting ‘PC’ on the cameras connection options. The camera will install using drivers built into the Mac and appear on the desktop.
    Iphoto should start up automatically when the camera is connected to the Mac, and give you the option to import your Photos and Motion JPEG Video. We recommend using OSX 10.4 onwards and Iphoto 08 onwards.
    To download your AVCHD video you will need to use the Imovie 09 package from Apple. Imovie will not automatically open. You will need to open Imovie and then click on the Import button on the left hand side of the software.
    Please note that Imovie 08 will detect the AVCHD videos on the camera but may crash when importing. There is advice on the Apple website regarding this: http://support.apple.com/kb/HT3481
    For further help using the Mac applications please refer to the Apple website, contact Mac by phone or visit your nearest Mac store.
    I trust that the above information will be of assistance to you. However, of course, if you should have any further queries, please do not hesitate to contact us.
    Best regards,
    Steve Schulte
    Thursday 18 April 2013

  • Where does time machine store content that would be found in the Finder window under "All Images, All Movies, All Documents"? Also, I have many Garageband projects and mp3 files I can't find.

    Where does time machine store content that would be found in the Finder window under "All Images, All Movies, All Documents"? Also, I have many Garageband projects and mp3 files I can't find.

    Easiest way to find time machine files is to open up the folder or application(works for email and iphoto)  they were in - then click on time machine ICON or enter time machine from the time machine menu to go back through the files.

  • Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

    Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

    MOV is a wrapper that can contain many different codecs. The message you get is indicative of a distribution codec inside the MOV wrapper. You may need to convert the material to an editable codec before importing.

  • Image to move with keypad?

    How I get Image to move when I press x-key on keypad?

    That will not work. Why?Because you can't add key listeners to Images - as you could have easily found out if you had checked the API docs. It's like adding a key listener to a String. Both aren't designed to take key input. How about adding it to the component that is supposed to take the input instead?

  • TS1717 Itunes crashes when I try to playback iTunes purchased movies that have been burnt to Verbatim DVD-R discs.  Any thoughts?

    Itunes crashes when I try to playback iTunes purchased movies that have been burnt to Verbatim DVD-R discs.  Any thoughts?

    Try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • Help - Clone causes image to move

    PSE 9
    When I move the clone stamp over the image it moves the whole image and shows a duplicate image beneath. This is a new problem as i have used this tool often.
    Thanks in advance for your help.

    You probably have the Clone Source Overlay on.
    Most people set it to clipped so you can still see a preview of the clone source or you can turn it off.
    There is a button on the tool options bar to get to the clone source options:

  • How can I save the images and movies on a  external Disk from iphoto program, to protect the images when problems occur in the laptop,

    How can I save the images and movies on a  external Disk from iphoto program, to protect the images when problems occur in the laptop,

    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
    If you want to back up the Photos only:
    Export them using the File -> Export command.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

  • Why doesn't Disk Utility allow me to select an image or movie to burn?

    Why doesn't Disk Utility allow me to select an image or movie to burn?  Everything is greyed out, even files.

    You cannot burn a movie with Disk utility - you need a burn application which will encode, author, and render the files so you will be able to watch the movie in any DVD player. There is iDVD (still available within the retail iLife 09 or 11 disks available at online resellers or ebay, amazon, etc), or Roxio Toast or Burn (free, but very basic), or google for others.

Maybe you are looking for

  • Changing the way downloads appear in the fan?

    I have so many files in my downloads folder that when I click on it, it arches off screen and I am unable to see the entire list of items. Is there a way to make the list go straight up, instead of bending to the right? Thanks.

  • Compiler Error Message: BC30451: Name 'UserEmail' is not declared.

    Have the message when I test the page. Anyone sugest a solution please? Compiler Error Message: BC30451: Name 'UserEmail' is not declared. Page code below. <%@ Page Language="VB" ContentType="text/html" ResponseEncoding="iso-8859-1" %> <%@ Register T

  • Essbase Shared Services

    Hi, Can any one tell me what are the significant improvements in Essbase Shared Services with the new Essbase 11.1.1 version over the Essbase System 9? If anybody know this, Please let me know. It will be a great help to me. Thank you very much

  • Help with changable windows.

    Hi all, I'm a newbie to this forum but I'll just cut to the chase. I have been implementing a GUI using Swing which is set up and looks fine. It consists or Radio buttons along the top and a series of labels and text panels relating to them below. Ho

  • How to show Tool Tip to the XGlobe Component

    Hi Expert, I am new to the Xcelsius.I have an requirement and need your valuable inputs. I am using the XGlobe component, in which i have used alerter on it, by using the pins. I have 200 countries to show on the globe. It is not possible for anyone