Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5

PROBLEM: Premiere CS5 - Project Monitor playback is jerky
This had NOT been an issue prior to reinstalling the operating system and all software. I have read numerous articles on the forums and have tried everything I can find...with no results.
STEPS TAKEN TO RESOLVE THE PROBLEM:
I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back.
Since I have 96 GB of RAM, I don't use a pagefile. A zero MB page file is the same setting I had prior to rebuilding the C: Regardless of whether I have a pagefile or not, the problem persists.
I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project - the problem persists.
Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up. I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me. Keep in mind that the System drive is a solid state drive. Anyhow, I had no choice but to dive in and reinstall everything. I wiped the system partition of the SSD using quick format and started installing the operating system. Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr. Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
SYSTEM CONFIGURATION:
The Operating system and all software is installed on C:
All data files and most profile related folders are stored on D:
C:\ (one Intel Solid State Drive - SYSTEM DRIVE) Used Space: 57.5 GB Free Space: 388 GB
D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
Operating System    Microsoft Windows 7 Ultimate Version    6.1.7601 Service Pack 1 Build 7601
System Manufacturer    Intel Corporation
System Model    S5520SC
System Type    x64-based PC
Video    NVIDIA Quadro FX 4800 driver v.320.78
Display        Dell 27" LCD (DisplayPort)
Display        Dell 27" LCD (DisplayPort)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Installed Physical Memory (RAM)    96.0 GB
Page File Space    0 bytes
PREMIERE PRO CS5 SETTINGS:
Monitor PLAYBACK RESOLUTION: Full
Monitor PAUSE RESOLUTION: Full
(regardless of this setting, the problem persists)
PREFERENCES:
MEMORY:
Installed RAM: 95.9 GB
RAM reserved for other applications: 10 GB
Optimize rendering for: Performance
(Changing this setting to 'memory' does not resolve the problem)
MEDIA:
Media Cache Files
X - Save Media Cached files next to originals when possible
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
(User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab. This is the same configureation I had prior to rebuilding the C:\drive. Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
Media Cache Database
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
PROJECT SETTINGS:
Scratch Disks
Path: D:\Users...\My Documents\
General
Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
(Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
If any of y'all have any other suggestions, I'm all ears.
Thank you.

I'VE RESOLVED THE PROBLEM!
PREFACE:
OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too).
If you've read my post above, you've seen all the steps I've taken to resolve the problem. I've read many posts, some of which have mentioned hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem. I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe. Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle).
In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM. bla bla bla, puke...whatever. Bottom line is this:
It's not a software issue. It's not and Adobe issue; and Gawd no! It's NOT a PC vs. Mac issue! HA HA. The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
SOLUTION FOR ME:
Download and install the updated drivers for the motherboard. Mine is an Intel Workstation Board S5520SC. Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating. A very handy, time-saving tool!!! Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
The scan revealed two Intel drivers needing an update:
Intel Chipset
Wired Networking
and one non-intel driver:
Creative Labs Sound Blaster X-fi
I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard.
ROOT CAUSE:
While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
Peace

Similar Messages

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

I have Adobe Acrobat 9 Standard on both of my computers. Some time ago, one crashed my computer and I had to reinstall the operating system and all applications. After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software v

I have Adobe Acrobat 9 Standard on both of my computers.
Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.
After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software version 9.0.0 update to the same level as it was before the crash and that the other computer has version named 9.5.5.
The system for update from version 9.0.0 does not work at all. "There are no updates" listed in the dialog.
Can you advise how I get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level as the computer had before the crash.

ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/

Ibought adobe photoshop cs5 exended will this work on my new iMac operating system mac osx.10.9.13a1

Hello i,m new with mac. I bought adobe photoshop cs5 exended will this work on my new iMac operating system mac osx.10.9.13a1900

Hi,
Photoshop cs5 should work on Mavericks mac OS X 10.9

HT1338 I downloaded upgrades available. The installation of those took a long time after re- initiatin the system and had to off. After this I could not get it to turn on again. Just stays in the gray screen with apple in the middle. What's wrong?

I downloaded upgrades available. The installation of those took a long time after re- initiatin the system and had to off. After this I could not get it to turn on again. Just stays in the gray screen with apple in the middle. What's wrong?

Sorry to hear of your problem, but any hardware in a computer can fail - that includes the hard drive, the logic board, etc, etc. Fortunately, it usually doesn't happen that soon; however, I've read of hard drives failing within 6 months.
So, since you did not purchase the extended Applecare Protection Plan (3 years coverage), you will need to make a decision to repair or sell it as is. I would always purchase 3 year coverage for an all in one or a laptop because repairs are expensive and at least I'd be covered for 3 years.
We can't speculate on whether there should be a recall or not; these forums are for user to user assistance with technical problems. In your case, there is nothing we can help with since you've already gotten a diagnosis.

After installing new operating system, Mac started to open word when I turn on the mac and a question always appear about FaceTime.

After installing new operating system, Mac started to open Word when I turn on the Mac and a question about face time always appear when turn on the mac. What should I do?

Look in system preferences>users and groups>log in items.
Barry

After installation third Operation System my Imac(27) heating quikly and better.

Good Afternoon. After installation third Operation System my Imac(27) heating quikly and better.
I had MacOs and Win7 32bit(installed in Shop). It was ok.
But 32 bit OS didnt work with 8Gb RAM. Therethore i installed Win7 64 bit.
Now i Have MacOs, Win7 32bit, Win7 64 bit.
Before installation WIn7 64bit, in Win7 32bit my Imac was working in common mode(Internet\Video) without propeller noise. But now, i have noise after 10-15 minutes Video or Browser using.
In Win7 64bit i had more propeller noise and after 10-15 minutes play computer game, i have lags and troubles with performance!! My propeller's are spinning with maximal velocity(after 10-15 minutes). Therethore i cant play games\watch Video in my Win7 64 bit. I think that i must be install someone drivers?? I have BootCamp 4.0 under my Win7 64 bit.
In Win7 32 bit, i dont have problems with perfomance, but noise is really stronger than was early.
Please, Help me!
Sorry for my bad English.
Text for Russian employee:
Я купил Imac 27 с установленный МакОс и Win7 32bit. Всё было хорошо, но под 32 бита не работает 8гб Озу.
Поэтому я установил 64битку, но под ней сильно начинают крутится кулеры и вентиляторы. Примерно через 15 минут они крутятся на максимальной скорости!! Попробовал поиграть в игры, через 15-20 минут производительность начинает падать и начинаются "подвисания". Т.е. поиграть не реально. Да и при обычном сёрфинге страниц нагрев происходит быстро и кулеры начинают крутится быстрее.
Под 32 бита производительность не падает(мной замечено не было), но нагрев происходит быстрее и кулеры начинают крутится тоже быстрее. Даже при обычном сёрфинге уже начинается шум.
Не знаю по поводу нагрева, может он и в пределах нормы, но шума до установки новой винды было меньше!
Помогите разобраться с проблемой. Я не хочу потерю производительности под Win7 64бита и хочу уменьшить шум/нагрев под обеими Окнами.

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

I downloaded the new operating system and all my contact details,address boof and numbers are GONE?When I receive a test email it dissapears after 30 seconds.ISP is Cox in San Diego and they don't have a clue?

I downloaded the new operating system and all my contact details,address boof and numbers are GONE?When I receive a test email it dissapears after 30 seconds.ISP is Cox in San Diego and they don't have a clue?

Hello Brian Delaney,
It sounds like you are trying to send emails but for some reason, thousands show activity. I would start by re indexing the mailbox to help troubleshoot the issue:
1.Quit Mail if it’s open.
2.In ~/Library/Mail/V2/MailData, delete any file that begins with “Envelope Index,” such as Envelope Index or Envelope Index-shm.To show your home Library folder, hold down the Option key, then in the Finder choose Go > Library.
3.Open Mail.Mail creates new Envelope Index files. This process may take a few minutes, depending on how many messages Mail is reindexing.
Mail (Mavericks): Reindex messages
http://support.apple.com/kb/PH14876
If the issue persists, I would next remove the account, restart the computer, and re add the account:
1.Choose Mail > Preferences, then click Accounts.
2.Select an account, then click Remove.
Mail (Mavericks): Remove mail accounts
http://support.apple.com/kb/PH14944
Removing an Exchange or IMAP account doesn’t permanently delete the account’s mailboxes and messages because they’re stored on the mail server. To retrieve the account’s mailboxes and messages from the server, add the account again in Mail.
To add the account again, click the rather than the as described above and retest the issue.
Thank you for using Apple Support Communities.
Take care,
Joe

I downloaded the new operating system and now my Thundrbilt monitor is not showing my desktop is not working

I downloaded the new operating system and now my Thundrbilt monitor is not showing my desktop is not working

Could be since it (security software) is listed as #5 in the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

I bought a second hand Macbook Pro and colorful stud Only after a few months I decided to reformat it Bad movie started here I did not get it with a disc and I come to install the operating system And he asks the name of Apple's user ID financed had been

I bought a second hand Macbook Pro and colorful stud
Only after a few months I decided to reformat it
Bad movie started here I did not get it with a disc and I come to install the operating system
And he asks the name of Apple's user ID financed had been bought Lion OS Now
And who sold me does not answer then I found the phone number of his mother
She said he lived in USA and paid him more than the lion version of the MacBook and now I can not install Lion
And I'm not from USA

Unless you go back to the original owner, yes you need to pay for it again.
You're entitled to the OS that shipped with the device from Apple, but if you don't have that media there's nothing you can really do. If the system originally shipped with 10.7 or 10.8 then when you boot it to Internet Recovery, it will automatically offer you that OS version (as the serial # is registered with Apple). If it shipped with an older OS, then you need to enter the Apple ID that purchased 10.7 or 10.8. You didn't purchase it so that's not you.
The options you have are to buy Lion for $29 US (I don't know the price in Palestine), or Mountain Lion for $19 US (don't know the price in Palestine either), and install from scratch.
And it's a good idea to know you have restore media before you reformat your machine.

I do not know what I should phone is locked after changing the operating system

I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I can not find the receipt of the first purchase when I moved to another country . I now throw my iPhone ?

It depends what you mean by 'locked' - it can mean locked by a passcode or linked only to one particular carrier (service provider). If the latter, see the post above; if it's a passcode issue:
1. Assuming this was bought new and you have set up Activation Lock and forgotten the passcode, please see this page:
http://www.lifehacker.co.uk/2011/10/24/youve-forgotten-iphones-passcode
2. If you bought it second-hand (used) - though this is not the impression I get from you post - then only the previous owner can unlock it.

Premiere Pro Project Manager does NOT include After Effects files.

Warning: Premiere Pro "Project Manager" does NOT include the After Effects 'dynamic linked composition' files associated with the project when "Collect File and Copy to New Location" resulting in the incomplete and loss of all dynamic linked compositions in the new project destination ( folder or disc drive ) .. I know this also includes Photoshop dynamic links and assume includes Audition audio files as well.

Here's the best way: Personal Responsibility.
Put all of your project files in one file. Stop asking PPro to do it for you. It's simple. This is a no-brainer. If you create a linked comp, create it in the same file as your PPro project and files. When you send it to Encore, create the Encore project in the same folder. Works all the time, every time. When you're sure that you're finished with the project for the forseeable future, move the entire folder off your workstation into storage. Do I move a copy of each asset (video clip, image, audio, etc.) into this folder before I import it to my AE or PPro project? Yes I do. Is it overly time-consuming? Not really. I can fly on my machine. Does it beat not being able to open a project later. Oh yes. Yes it does. I'd say I did 50 projects last year this way. When I occasionally had to move a project folder back to the workstation, I had no problems. Everything worked as it did before I off-loaded it. That's because I take personal responsibility for my projects. It's imporatnat that theyt work, especially if I end up having to hand it off to a third party down the road.
BTW, my workstation is RAID 0. If you are using anything less, you need to upgrade. What I'm trying to tell you is that my system works very well. I have not always done things the right way. I have had my share of frustration. The point is that I learned. Now I'm passing that on to you. I use CS5 on an HP Z800 with a measely 12 gigs of ram and a single i7 quad core and the aforementioned RAID 0 configuration and a hacked Nvidia GTS 450. It works quite well. I'm sure I would do even better with another i7, 12 more gigs of ram and a Quadro 4000, but this is what they give me to use.
Additionally, I'm using CS5 at home on a MUCH older HP xw8200 dual dual Xeons, 12 gigs of ram and software-only MPE. Guess what? It works quite well.

Quicktime playback all jerky after update

The last quicktime update has turned my playback all jerky. I can't even play a normal DV cam video with more then about 4 ot 5 fps. The playback info window however doesn't appear to notice and says the playback is fine at 25 fps as it should be.
Since I'm working in the video industry, it is vital for me that quicktime playback. And I work with HDV videos, which have been playing absolutely fine. And now, they play with 1 frame every 3 seconds. I've tried a reinstall of Quicktime, I even completely setup a new system install. Same result.

Please report this
http://www.apple.com/quicktime/feedback
This has happened once before (some time ago) and was fixed. But every one should complain since intel Mac get all of Apple's attention now.
Also, reverting to a previous version with pacifist does work but then you cannot video conference in ichat and who knows what else!

SharePoint 2007 performance issue after upgrading the operating system

We upgraded the operating system of our SharePoint Server 2007 from 2003 to 2008 R2. After upgrade we rebuilt the SharePoint using content DBs we backed up before upgrade. All settings is same except that we moved the DBs to new SQL servers. Now users are
reporting performance issue with sites. I experienced it myself some of the pages takes 9-30 seconds to load. Also our SharePoint server is single server. I monitored the SharePoint Server and it is fine. I did fiddler trace and here are the result. I see
lots of 401 (login failed) errors then 302 (redirect) then 200 (OK). Do you know why we are getting 401 errors?
Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
184
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
341
text/html; charset=us-ascii
iexplore:15344
185
302
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
196
text/html; charset=UTF-8
iexplore:15344
186
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
341
text/html; charset=us-ascii
iexplore:15344
187
200
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
105,487
private, max-age=0; Expires: Mon, 22 Dec 2014 21:37:48 GMT
text/html; charset=utf-8
iexplore:15344
188
401
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
341
text/html; charset=us-ascii
iexplore:15344
189
200
HTTP
sp07.ourcompany.com
/_layouts/images/prevbuttonltr.gif
76
max-age=31536000
image/gif
iexplore:15344
190
200
HTTP
sp07.ourcompany.com
/_layouts/images/nextbuttonltr.gif
78
max-age=31536000
image/gif
iexplore:15344
191
200
HTTP
sp07.ourcompany.com
/_layouts/images/day.gif
1,051
max-age=31536000
image/gif
iexplore:15344
192
200
HTTP
sp07.ourcompany.com
/_layouts/images/month.gif
1,068
max-age=31536000
image/gif
iexplore:15344
193
200
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
28,814
max-age=31536000
text/css
iexplore:15344
194
200
HTTP
sp07.ourcompany.com
/_layouts/images/week.gif
1,057
max-age=31536000
image/gif
iexplore:15344
195
200
HTTP
sp07.ourcompany.com
/_layouts/images/weekbox.gif
149
max-age=31536000
image/gif
iexplore:15344
196
200
HTTP
sp07.ourcompany.com
/_layouts/images/alldayDefault.gif
157
max-age=31536000
image/gif
iexplore:15344
197
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttntoday.gif
146
max-age=31536000
image/gif
iexplore:15344
198
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttn.gif
95
max-age=31536000
image/gif
iexplore:15344

Hi
when you request a Site collection (http://domain/) or a Site (http://domain/foo/) of your Publishing Site you get redirected to the http://domain/Pages/<WelcomePage>.aspx. SharePoint 2007 uses the 302 header (location temporarily moved) for
this purpose. Surprisingly even WSS uses the 302 header to redirect a root url to the default.aspx. In comparison ASP.NET uses an internal redirect to render the default page when the root url requested: there is no redirect in this situation.
Check the link which can give more input
http://blog.mastykarz.nl/sharepoint-2007-redirect-solved-using-301-instead-of-302-redirects/
for error 401 you can check this link
http://discussions.citrix.com/topic/97027-no-resources-401-unauthorized/d
and check SharePoint ULS logs and event viewer for any exceptions.
Please mark the Answer and Vote me if you think that it will help you to resolved your issue

Operating system and premiere in different languages

Hi there, the operating system of my computer is german but I would like to purchase premiere pro creative cloud in spanish. Could anybody tell me if this is compatible? Or would there be any problems because of language differences?
Thank you very much.
Bianca

Hi Bianca,
Welcome to the community.
You may subscribe to CC in any other language other than your OS language.
You may refer to the following link:
http://forums.adobe.com/message/5480317
Let us know if it helps,
Thanks
Gurleen

Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5

Similar Messages

Maybe you are looking for