Premiere elements 10 doesn't recognize avchd from my canon camcorder

I have a canon HG20 with Hard Disk but premiere doesnt recognize it and so I cant import video to the organizer or directly to Get Media. Only the flash memory SD of the camera recognize the photos. Im new with premiere elements and Im not sure what it is correct to do. I hope from some help
Thanks

Have you ensured that you have the latest version of Quicktime, per the program requirements?
When you started your Premiere Elements project, did you ensure that you selected settings that precisely match your video and audio specs? For instance, if this camcorder shoots in 1920x1080 with 5.1 audio, did you ensure that your project was set up for Full AVCHD 1920x1080 5.1?
Part 1 of my free 8 part Basic Training tutorials on Premiere Elements support site Muvipix.com will help you with the basics of project set-up -- a vital part of any project.
http://forums.adobe.com/thread/537685

Similar Messages

  • Premiere Elements 9 Doesn't Recognize AVI file

    I've recently downloaded three long videos from youtube (using a program called "youtube downloader hd"), so I could put together a short little  video. The program originally downloads it as FLV, but gave the option of converting it to AVI, which I allowed. However, when I started a new project with Premiere Elements 9, it pops up saying that the "File is not supported, or the right codec isn't installed." I'm getting frustrated, because I need to finish this video ASAP.

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen
    shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainspector.massanti.com/

  • Photoshop elements 13 doesn't recognize my Epson scanner

    I have a Epson Workfoce 545 wireless printer/fax/scanner and newly installed Elements 13 doesn't recognize the scanner.  Do any of you in this community have a suggestion? 

    The scanner is NOT present in the network.  The "all in one printer" that the scanner is a part of  is listed, however.
    Dave
           From: bridge_mastero <[email protected]>
    To: David Gross <[email protected]>
    Sent: Wednesday, February 18, 2015 9:09 AM
    Subject:  Photoshop elements 13 doesn't recognize my Epson scanner
    Photoshop elements 13 doesn't recognize my Epson scanner
    created by bridge_mastero in Photoshop Elements - View the full discussionHi ,   Please see in network that your scanner is present in the network list or not ?type Network on file explorer.  https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-7206081-729762/900-234/networ k.png  If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7206081#7206081 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7206081#7206081 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Premiere Element 12 does not recognize AVI movies.

    Premiere Element 12 does not recognize AVI movies created with Casio Exilim EX-FH100 camera.
    The operating system (Win 7 and Windows Media Player) recognizes these files without problems.
    While trying to load an AVI movie in Premiere appears this inscription: This file type is not supported, or the required codec is not installed.
    How can I fix the problem?
    Thank you.
    Francesco

    supporto premiere elements 
    Thanks to your advice I solved the problem.
    I installed the codec Morgan M-JPG from an existing link (http://morgan-multimedia-mjpeg-codec.en.lo4d.com/download) different from what I have proposed, this link was continually blocked by my anti-virus.
    After restarting Prenmiere Elements 12 (without reboot) AVI movies of my Casio have been read.
    The operating system of my PC is Windows 7.
    Thank you.
    Francesco

  • Doesn't recognize AVCHD files!

    FCE suddenly doesn't recognize AVCHD files. I've been able to import using Log And Capture before. Now it suddenly doesn't even recognize the files. I dragged them to the desktop and still no luck. What the ****!!???

    My issue is with the AVCHD recognition.
    Background:
    I have been using a card reader and popping the cards in there for import. Have not had any problems with this method up until this point. I have also copied the AVCHD folder to the desktop and imported from there with no issues. Suddenly FCE does not recognize either.
    I did a complete reinstall of SL because I have been having a few other issues apart from FCE. I have done this with all previous upgrades of OSX on the advice of most Mac pros. Have not had any issues with those installs. With SL I did the upgrade without the complete reinstall. It seemed to work fine but I started running in to several system quirks. So to take that out of the equation I wiped the drive and did the clean install. So far so good. I back up my system drives at least once a month so I have everything saved.
    However... FCE still will not recognize the AVCHD files, either from the card or from the desktop. I will try from the camera via USB.
    Thanks again.

  • Imovie 8.0.6 doesn't recognize video from Canon Mark 5d II

    imovie 8.0.6 doesn't recognize video from Canon Mark 5d II, worked fine with 5d. imported into computer, exported thru iphoto, came out file ex. MOV which imovie doesn't read. Can I get iphoto to export dif. file ex.?  5d using same process file ex. was m4v.

    Hi Rikk,
    Thanks for answering.
    I downloaded and installed the DNG Converter 7.1, then opened Lr again, but it's still not opening the files.  Am I doing something wrong?
    Please advise.
    Thank you,
    Joel

  • Premiere elements 11 does not recognize the external ASUS Blu-ray burner

    Premiere elements 11 does not recognize the external ASUS Blu-ray burner

    More on what Hunt talked about...
    Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
    Start --> http://forums.adobe.com/thread/608660
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus http://forums.adobe.com/thread/562941
    And a solution... to try even if you do not have the problems described above
    Set your DVD output to a folder on your hard drive and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)

  • Photoshop Elements 13 doesn't recognize Samsumg images not jpeg images even

    What  have I to do, becauce Photoshop Elements 13 doesn't recognize Samsung images?  I have Samsung camera so I need Photshop Elements 13 Organizer recognize Samsung images. Canon images it recognaze.

    Hi,
    there are two photos, the first SAM4434 is the photo which PSE 13 import
    correctly, the second photo SAM4113 is which PSE 13 can't import. There is
    the third enclose where is an information that PSE 13 doesn't import the
    photo because the photo is on Organizer or PSE 13 doesn't recognize a file.
    The information is in Finnish but the information is what I have translated
    on this e-mail. PSE 13 doesn't recognize the file because it is not on
    Organizer. The both photos has taken by Samsung NX200 camera, There have
    never been that kind of problem by Canon camera taken photos
    Best Regards,
    Pertti Hynninen
    Finland
    2014-10-13 8:52 GMT+03:00 andaleebfatima1 <[email protected]>:
        Photoshop Elements 13 doesn't recognize Samsumg images not jpeg
    images even  created by andaleebfatima1
    <https://forums.adobe.com/people/andaleebfatima1> in Photoshop Elements
    - View the full discussion
    <https://forums.adobe.com/message/6818793#6818793>

  • Iphoto doesn't recognize pics from ipod touch

    iphoto doesn't recognize pics from ipod. It says they are an unrecognizable format.
    Anything to do with the new software update?
    btw
    hate this new system.
    I guess the engineers need work?

    Have you been able to get the ISO on that camera before. Did you have the camera set to Auto?
    All of my Canon cameras do not record the specific ISO even though a specific ISO is set. The only Canon file I have that gives an ISO in iPhoto is from a Canon EOS 30D. I have Konica files that provide ISO in iPhoto as does a Nikon D100. The Canon point and shot cameras, s10, s100, s110, s400, s410 and the SD700 IS do not record the specific ISO value. It just give Light Source-Auto when viewed in an application that can read all of the fields.
    Do you Twango?

  • Adobe premiere element 12 doesn't work without administrator right

    adobe premiere element 12 doesn't work without administrator right.
    I have these 2 messages after i had selected a New project:
    Premiere elements debug event
    premiere elements has encountered an error
    [..\Src\Core\Preferences.cpp-347]
    Microsoft visual C++ Runtime library
    Runtime Error
    Programm:C:\Program Files\A..
    This application has requested the Runtime to terminate it in an unusual way

    then start as administrator.
    if you want to automate that: http://technet.microsoft.com/en-us/magazine/ff431742.aspx

  • IMovie and Importing video AVCHD from the Canon High-Definition HG10

    iMovie 08 does not let me import high definition video (AVCHD) from the Canon HG10 camcorder. Could you let me know how I can do this or what program can do it? iMovie 08 and the Mac do not recognize the high definition video (AVCHD). Thanks for your assistance. Best, Joe

    Your camera is on the supported list, and if you will search these forums, you will see that many people are using it.
    iMovie recognizes AVCHD, but only from a supported and connected camcorder.
    If you prefer not to import from your camcorder, you can buy a program called Voltaic. It takes about 12x realtime to convert AVCHD to an editable format. You can import directly from your camera much quicker.

  • How do I upgrade elements 10 to open raw files from my Canon 70d?

    How do I upgrade elements 10 to open raw files from my canon 70d?

    Normally, if there are any updates for your version of PSE then they should be offered to you automatically.  However, you can also check if there are any new updates by going to:
    Help >> Updates
    If your camera is relatively new then even by getting the updates you may not be able to edit raw files from the new camera because old versions of PSE are normally not updated as soon as the new version hits the market.  We are currently at version 13 so version 10 was stopped long time ago.  However, you can see a workaround at this link where I posted a video to get things moving:
    <Why can't I open my RAW files from my Nikon D7000 ?? I can open RAW files from my old Nikon D70's but not my D7000...>
    Hope this helps.

  • Premiere Elements 12 does not recognize blank Blu-ray disc.

    I just upgraded from Premiere Elements 8 to PRE12.  Now when I insert a blank Blu-ray disc in the BR burner, I get a message "Media Not Present".  It does recognize the burner, but not the blank disc.  Yet when I open PRE 8, PRE 8 does recognize this very same disc in the same burner!  Also, PRE 12 can burn a blank DVD in this same burner.  The Blu-ray disc also appears as a completely blank in Windows File Explorer.  And this is a problem even after updating to release 12.1.  The Adobe chat representative tells me this is a know issue with PRE12.    I find that difficult to accept, since why would Adobe change in PRE 12 something that was not broken? What's the truth, and when and how can it be fixed?

    First, I tried uninstalling, register cleaning and reinstalling Premiere Elements.  This was a mess.  I kept getting error messages when trying to reinstall.  So I had to do a system restore to just before I uninstalled PRE.  After that restore, PRE would not open.  So I did another uninstall from Control Panel and reinstall, without touching the registry.  Then, I was back in operation, several frustrating hours later. But still the BR drive would not recognize Blu-ray discs.
    So then I loaded a BR-RE disc, instead of a BR-R, and still no recognition.
    Then I installed the external Blu-ray burner, and finally PRE12 recognized the blank Blu-ray disc.  I had a sign that this would work when I attached an external DVD drive to burn a AVCHD file, and PRE12 recognized the blank media, whereas it did not recognize any blank DVDs in the internal BR drive for burning AVCHD files.  As a alternative to borrowing an external BR drive to see if this fixes the Media not Present message, I suggest using a much more readily available external DVD drive and try to burn a AVCHD file first.  If that works, then one can be much more confident that purchasing an external Blu-ray drive will provide the solution.
    Yet I deeply resent having to purchase a $125 piece of hardware, which is otherwise useless to me, to fix a bug in a program.  The box promises the ability to export a Blu-ray disc.  Since their lawyers use the weasel word "compatible" Blu-ray burner required, I fully expect them to take the position that now only an external burner is "compatible", and do nothing to fix the compatibility with internal burners.  Potential buyers be forewarned!
    As an alternative to paying more money to make their software work as indicted on the box, one might want to settle for only being able to write AVCHD files to a DVD.  Most every computer (except Ultrabooks) has an internal DVD burner, which supposedly all that would be needed to burn this kind of HD file.  But first, we all need to know, will PRE12 return a Media not Present message when burning a AVCHD file to an internal DVD burner?  What are the field reports of any problems incurred doing this procedure?  Please advise.
    And one more question.  When I burn an AVCHD file to a DVD, the DVD is not finalizied by PRE12.  After burning the AVCHD file, the DVD shows free space available, but after burning a DVD Video, there is no free space available.  Moreover, ImgBurn does finalize DVDs after burning AVCHD files to them.  So Is this failure by PRE12 to finalize another bug?  Can ImgBurn now finalize an unfinalizied AVCHD disc left by PRE12 -- without having to run another session of PRE to burn to a folder now, of course?  If so, how?

  • Premiere Elements 11 no longer recognizes my external blu-ray burner.

    I have used my Samsung SE-506BB-TSBD external burner many times before today, but for some reason Premiere Elements 11 is not recognizing it. Windows 7 sees it just fine. Premiere Elements 8 (which is still loaded on the same computer) also does not recognize it.
    What do I need to do? Samsung's website is no help, but I have a feeling it's an Adobe issue since Windows 7 still recognizes the drive.

    rbcourter
    When is your Blu-ray burner not recognized
    Premiere Elements 11: burn to DVD disc, burn to Blu-ray disc, burn to AVCHD on DVD disc, or all?
    Premiere Elements 8.0/8.0.1: burn to DVD disc, burn to Blu-ray disc, or both?
    and when you wrote:
    I have used my Samsung SE-506BB-TSBD external burner many times before today
    Did "....many times before today" imply that you could use the burner for Premiere Elements 11 and 8.0/8.0.1 before. I am trying to get a whether this is a "it worked before but now" or a "it never worked before" type issue.
    Do you have the USB 2.0 cable connected to a USB 2.0 computer port directly or via a USB multi port hub? I take it that this burner does not have AC support? If you are using only 1 USB 2.0 port, can you set up the burner for 2 USB 2.0 ports?
    Does the computer involved have an internal burner? Or is this the only burner that you have available to you external or internal for the computer?
    Let us start here and then decide what avenues of further troubleshooting are available to us.
    Thanks.
    ATR

  • Adobe Premiere Elements 12 doesn't import MOV Files

    Hi, All!
    I'm working on Windows 8.1 64 bit and use Adobe Premiere Elements 12. I've downloaded and installed on my PC latest version of Apple QuickTime 7.7.4.1680.86 from http://www.apple.com/quicktime/download/
    I've trying to use some free stuff from http://www.detonationfilms.com/Stock_Directory.html and mix it with my video. You may download example of Pre-Keyed Explosions using direct link: http://www.detfilmsshockwave.com/DVExplosion01.zip or any other stuff from this site...
    ...but my Adobe Premiere Elements 12 with installed the latest updates doesn't import these MOV Files with codec PNG Image
    In fact, Apple does not offer ProRes components for QuickTime on Windows, but I don't know do this problem interact with my trouble?
    IMHO, it's best  to look at the crash logs for QT32Server! I've found executable QT32Server on my PC in next folder:
    C:\Program Files (x86)\Adobe\Elements 12 Organizer\CAHeadless\32\Adobe QT32 Server.exe, but can't found any import logs on my Windows 8.1 including hidden folders. I have trying to check the windows events log for errors %windir%\system32\eventvwr.msc /s but it contains no necessary items.
    I have trying to re-install version 6.5.2 of Apple QuickTime, but without success. May be I must try to install any other older version, i.e. 7.5.5 ?
    I think perhaps such behavior of Adobe Premiere Elements 12 is in design?
    May be I'd try third party free video converter, like SUPER e.t.c. to convert MOV container to AVI?
    Please help me to find a way to fix this problem.
    Sincerely yours,
    JennyK
    http://jennyk.ucoz.ru

    Jenny Koltsova
    What is this "codec PNG image" that is contained/wrapped by the .mov format? What are the video and audio properties of this video...frame size, frame rate, interlaced or progressive, pixel aspect ratio, et al.
    It sounds like you have Premiere Elements 12 is running on some version of Windows with QuickTime (latest version) installed on the same computer as Premiere Elements. Great. Requirement for QuickTime met.
    Where is this PNG.mov coming from? And what type of .avi were you thinking to convert to?
    Premiere Elements 12 Publish+Share/Computer/QuickTime does offer an export with a PNG video codec with the .mov file extension. I am in the process of exporting my Timeline to that type of file and then determining if I can import that back into Premiere Elements 12 project.
    When your png.mov will not install into Premiere Elements 12 on Windows 8.1 64 bit, what is the specific message that you are getting from the program at that time.
    More shortly after my export of the png.mov is finished. Any minute now.
    ATR
    Add On....The png.mov produced by Premiere Elements 12 Window 7 64 bit could be imported into a Premiere Elements 12 project. I am now going to my laptop which has Premiere Elements 12 on Windows 8.1 64 bit to do the same thing and see what happens there. Back soon.

Maybe you are looking for