Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Similar Messages

Is Adobe Premiere Elements 10 compatible with Windows 8? Or maybe it will have problems?

Is Adobe Premiere Elements 10 compatible with Windows 8? Or maybe it will have problems?

Riccardo Pesare
I have Premiere Elements 10 on Windows 8.1 64 bit, and it runs well there.
But, I must disagree with SG when he writes
It will likely run. But it will not be able to take advantage of Windows 8's advanced architecture (including the 64-bit operating system and ability to access more than 4 gigs of RAM).
You can prove to yourself that Premiere Elements 10 is a 64 bit application running on Windows 8 64 bit. To do this use the Process Explorer Sysinternals and add a Image Type Column readout. When you do this for Premiere Elements 10, 11, or 12 on Windows 7, 8, or 8.1 64 bit, the readout tells you that you are working with a 64 bit version.
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
And, as a 64 bit application, Premiere Elements 10, 11, or 12 Windows should be able to take full advantage of the 64 bit system when Windows 7, 8, or 8.1 64 bit.
I suspect SG is thinking Mac not Windows in his comment. It is my recollection that Premiere Elements 10 Mac is still a 32 bit application on 64 bit system. And, you are using Windows, not Mac.
We will watch for his clarification on this point or for support for what he posted as is.
ATR

Is Photoshop elements 10 and Premiere elements 10 compatible with windows 8.1?

Is photoshop elements 10 and premiere elements 10 compatible with windows 8.1? I am upgrading from XP and am trying to determine if I should go to 8.1 or windows 7?

MakoM
Photoshop Elements 10 and Premiere Elements 10 are compatible with Windows 8 or 8.1 64 bit. I have them installed on those operating systems and no problems. My video card is Intel HD Graphics.
But, a major question is what video card will be used? There is a major issue with Premiere Elements 10 users whose computers use a NVIDIA GeForce video card. It is fixed by rolling back the driver to about May 2013. This is a user to user fix. Neither NVIDIA nor Adobe has offered one. Full details are the Announcement at the top of the Premiere Elements Forum
http://forums.adobe.com/community/premiere_elements?view=discussions
Overview of that situation
http://www.atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Please let us know if we can be of assistance in this matter.
Thank you.
ATR

Problem with Windows Media Player since installing Firefox 4.0

Problems with Window Media Player. When I am using Windows Media Player to view a video from another source I am having problems. When I hit pause and then go back to hit play it does not have any sound. The player is not on mute and it keeps going from pause to play with no sound most times. Please help. Thank-you. I have Windows Vista programs.

What can I do to get the Windows Media Player to work properly?

Will Premiere Elements 4 work with Windows 7?

I am going to have to upgrade to Windows 7 from XP. Will my Premiere Elements 4 work with Windows 7?

Monoscope
Premiere Elements 4 works great in Windows 7 Professional SP1 64 bit computer. I have been there and am doing that along with other versions of the program on the same computer.
Do not go to the desktop icon for Premiere Elements 4 and set a compatibility setting in the Properties.
Just make sure that you are running the program from a User Account with Administrative Privileges and perhaps also with a Run As Administrator (right click desktop icon, select Run As Administrator). Latest version of QuickTime remains a must.
Does Premiere Elements 4 meet your video editing needs, feature-wise and otherwise? If so, stay with it. If not, explore the latest version 12 via a tryout from Adobe before any thoughts of purchase.
The above is my take on your inquiry. Please let us know if you need clarification on anything written.
Thanks.
ATR
Add On...If you need a computer environment with greater resources for your Premiere Elements workflows, then you need to look at specifically Premiere Elements 10, 11, or 12 specifically on Windows 7, 8, or 8.1 64 bit.

Premiere Elements 13 , Problems with new text/titles

Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

High ATR,
Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
Grafikkarte: NVIDIA GeForce 8800 GT
If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
Project settings are the following:
General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
The video is a mixture of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
Thank you for your service.
thomasd
Von: A.T. Romano
Gesendet: Sonntag, 1. Februar 2015 23:55
An: Thomas Deschler
Betreff: Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13 , Problems with new text/titles
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

Using the Apple Remote with Windows Media Center

Hello guys
First of all, I am Swiss, so excuse me for my bad English (grammar and stuff...)
So, my problem: I bought the Apple Remote and I think it is very awsome! But since Apple has removed Front Row in Lion, I don't really can use it anymore. So I'd tried to use it with Windows 7 Media Center. But it doesn't work correctly. Does anyone know, how to fix that?
Thank you

I had a Green Button remote provided with HP PC XP, Vista for Windows Media Center prior to getting Mac Pro.
Now in Lion, I have Hauppauge WinTV HVR-980 USB adapter (less than $100) including a remote that works in Lion for the Hauppauge TV app.
In Windows, the same remote works with all "Media Center" processes Music, Pictures, TV... instead of mouse/keyboard. If your TV service requires set top box, then you have to use its remote to change channels.
If ISP's internet Co-Ax also carries TV signal, you can get Cable Splitter (smple picture):
http://www.ebay.ca/itm/2-Way-TV-RF-Coaxial-Cable-Splitter-CATV-Signal-/320868649 227?pt=LH_DefaultDomain_0&hash=item4ab543090b
and feed 1 co-ax to USB TV adapter, the other to your Modem/Router.
The Hauppage USB was a good choice because it serves Mac & Windows.
Also, In Windows, if you have an XBox, it can be used as "Extender" for your A/V output.
http://windows.microsoft.com/en-US/windows7/Set-up-a-Windows-Media-Center-Extend er
Although this may not answer your question, it describes other options.

Problem with windows media player

hallo, mine is hp pavilion entertainment pc
model:dv5-1110eg
i have a problem regarding windows media player when i use to click on it it is showing an error message like this
Windows Media Player Error Message HelpYou've encountered error message C00D1199 while using Windows Media Player.

Hi,
Just install Codecs. Download here.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Problem with Windows Media Player -- saving, transferring

Operating system: Windows 7 Home Premium
Product: HP Pavilion P6000 Series
Windows Media Player
Copy short videos onto a thumbnail drive from a different computer running Windows 7 with Windows Media Player. Thumbnail drive accepts files, lists and can play back fine on same computer. Take thumbnail drive to different computer also running/using Windows Media Player & Windows 7, and playback only plays back audio -- no picture. What am I doing wrong?

As WMP is not a DVD player, my suggestion would be to tell your clients to never use WMP.All our DVD discs go out with a warning not to allow WMP to be used.
In most computer setups, WMP does not play back video correctly as it does not have an MPEG codec installed, or has navigational problems.
All computers that have a DVD drive fitted, will have a dedicated DVD software player installed, such as Win DVD or Power DVD, so why not use that?

Multicast stream problem with windows media service

Hi,
I'm on a simple LAN composed by cisco 3560G and 3750G switches. On one of my switches, i've connected a windows media server that stream tv in unicast and multicast mode.
When i run the http://myserver/mystream.nsc generated by the server on the current server, it's working, i can see my stream. The problem is in the stations, i'm unable to see it.
I've activated IGMP Snooping on each switchs.
Here is the log of debug ip igmp snooping on the switch where the server is connected :
3750G#
Dec 4 18:32:52.882 GMT+1: IGMPSN: group: Received V2 report for group 239.192.39.139 received on Vlan 1, port Gi1/0/3
Dec 4 18:32:52.882 GMT+1: IGMPSN: group: Adding client ip 10.10.10.10, port_id Gi1/0/3, on vlan 1
Dec 4 18:32:52.882 GMT+1: IGMPSN: mgt: created group EFC0278B, on Vlan 1
Dec 4 18:32:55.147 GMT+1: IGMPSN: Received SVI query(224.0.0.1) on vlan 1
Dec 4 18:32:55.147 GMT+1: IGMPSN: Adding iquerier flag in vlan 1
Dec 4 18:32:55.147 GMT+1: IGMPSN: router: iquerier added on Vlan 1
Dec 4 18:32:57.907 GMT+1: IGMPSN: group: Received V2 report for group 239.192.39.139 received on Vlan 1, port Gi1/0/3
Dec 4 18:32:57.907 GMT+1: IGMPSN: group: Adding client ip 10.10.10.10, port_id Gi1/0/3, on vlan 1
Dec 4 18:33:00.852 GMT+1: IGMPSN: group: Received V2 report for group 225.10.10.10 received on Vlan 1, port Gi1/0/2
Dec 4 18:33:05.155 GMT+1: IGMPSN: timer: Vlan 1 report timer expired
Dec 4 18:33:14.769 GMT+1: IGMPSN: group: Leave for group 239.192.39.139 received on Vlan 1, port Gi1/0/3
Dec 4 18:33:14.769 GMT+1: IGMPSN: group: Adding client ip 10.10.10.10, port_id Gi1/0/3, on vlan 1
Dec 4 18:33:14.769 GMT+1: IGMPSN: group: Sending Group-Specific Query for group 239.192.39.139 on Vlan 1, port Gi1/0/3
Dec 4 18:33:15.775 GMT+1: IGMPSN: timer: Vlan 1, group 239.192.39.139, port Gi1/0/3 leave port timer expired
Dec 4 18:33:15.775 GMT+1: IGMPSN: group: Deleting group 239.192.39.139
Dec 4 18:33:15.775 GMT+1: IGMPSN: group: Deleting gce 0100.5e40.278b
Dec 4 18:33:15.775 GMT+1: IGMPSN: group: Sending Leave for group 239.192.39.139, source 10.10.10.10 on Vlan 1
Dec 4 18:33:15.775 GMT+1: IGMPSN: Received SVI query(239.192.39.139) on vlan 1
Dec 4 18:33:15.775 GMT+1: IGMPSN: Adding iquerier flag in vlan 1
Dec 4 18:33:15.775 GMT+1: IGMPSN: router: iquerier added on Vlan 1
Dec 4 18:33:16.782 GMT+1: IGMPSN: Received SVI query(239.192.39.139) on vlan 1
Dec 4 18:33:16.782 GMT+1: IGMPSN: Adding iquerier flag in vlan 1
Dec 4 18:33:16.782 GMT+1: IGMPSN: router: iquerier added on Vlan 1
3750G#
3750G#sh ip igmp groups
IGMP Connected Group Membership
Group Address Interface Uptime Expires Last Reporter
239.192.39.139 Vlan1 00:00:03 00:02:56 10.10.10.10

As WMP is not a DVD player, my suggestion would be to tell your clients to never use WMP.All our DVD discs go out with a warning not to allow WMP to be used.
In most computer setups, WMP does not play back video correctly as it does not have an MPEG codec installed, or has navigational problems.
All computers that have a DVD drive fitted, will have a dedicated DVD software player installed, such as Win DVD or Power DVD, so why not use that?

Any problems with Windows Media Player 9 for Mac OS X?

I want to be able to play video from CNN.com, but it says I need Windows Media Player 9. Before I download it, I want to know if it is reliable.
I've already got Flip4Mac, and that doesn't help. (I get a -2048 error.)
Please share experiences with Windows Media Player 9 for Mac OS X so I can decide whether or not to download it.
Thanks,
Matt

The default application you're looking for is "Stuffit Expander".
http://www.stuffit.com/mac/expander/ is the page you'll be looking for...think Winzip for Mac. Once stuffit is installed you should be able to open the .sitx or .hqx file you may have downloaded...essentially a package that stuffit can open for you so you can install media player.

Problems with Elisa Media Center (images quality)

Hi
I decided to install Elisa Media Center on my laptop. Everything works just fine, but only images from photo gallery are very ugly (I mean ragged). Don't know why, but when I play slideshow all of my photos, all of them are really bad looking. Just look.
This is screenshot from Elisa:
And that's how this image looks in original format (quality):

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Is Premiere elements 10 compatible with Windows 8 professional

Hi. I am currently running Photoshop elements 10 and Premiere elements 10 (64Bit) on a Windows 7 Home Premium machine. The Hardware specs are pretty good, with a I7 2.5 processor, 8GB RAM, 2GB dedicated video card etc.
I was planning to upgrade myself to Windows 8 Professional using the $14 offer... however, need to know for sure that these 2 software work with Windows 8 and there are no issues.
Is there anyone here, who has tried to run these 2 software on Windows 8, and if so, what has been your experience. Are there any issues, or any performance lags?
I am pretty sure I do not want to pay the additional dollars to upgrade to version 11, so all responses will be very helpful indeed.
Thanks in advance.

If the program is running great on Windows 7, you should have no problems when you upgrade to Windows 8 -- assuming you're not going from a 32-bit to 64-bit operating system or something else that might affect how the drivers perform.

Premiere Elements 13 problem with DVD menu templates

I recently purchased Premiere Elements 13 for my iMac. It crashes every time I attempt to add a DVD menu template to my project. Does anyone have a solution for this problem?

I just uninstalled and then re-installed Premiere Elements. When I opened the program, I clicked on Movie Menus from the Tools menu. There were blue bands on the menu thumbnails and I right-clicked on one and selected "download all." P.E. let me know that the files would need 2.5 GB of space and I told it to go ahead and download the files. The download was going fine and it downloaded all 2.5 GB of data. I could see the blue bands disappear from the thumbnails as the download progressed. When the downloading process was over the progress window disappeared. I saw the rainbow colored pinwheel spin around for several seconds and then the program crashed. The next thing I saw was a "Crash Report" with several lines of "computerese" and the message that it would be sent to Apple. I clicked OK and in a second or two a window from Adobe appeared asking me if I wanted to restart the program and send the crash report to Adobe. There was also an option for me to ask Adobe to send me feedback or tips for a workaround or solution to the problem and what came back was the message that Adobe had no workaround or solution to my problem. For each of the previous times the program crashed, I have seen all of these windows that I just described.
One other thing: when I re-opened Premiere Elements after the crash, I looked at the movie menu thumbnails and the blue bands were not there any more. So it seems as though Premiere Elements "thinks" they have been downloaded. If so, where are they and how do I use them? And how do I prevent the program from crashing?
Feel free to ask me any questions you want to, especially if they will help solve this problem. One reason I bought this program is that I want to make DVDs with menus and chapter selection buttons. I have been using iDVD, but Apple no longer supports it, and it does have a few bugs I have had to work around. I also have DVD Studio Pro, which came with Final Cut Studio a few years ago (before Final Cut Pro X) but it is not very user friendly. I also have Final Cut Pro X, which has the option of authoring DVDs, but doesn't have the DVD menu template options that are in iDVD and DVD Studio Pro.
Thanks for your attention and help.
bha51

Problem with Windows media player on MAC

I got a new macbook and installed windows vista. When I wanted to play CDs on windows media player there comes a message"windows media player have aproblem..." and the window closes. I contacted the Microsoft support system and they said that the it is the problem with the mac that the Macbook is not really supporting some of the files and they told me to contact the Apple support and even then they could not solve the problem. I returned the first laptop and got a new Macbook again and even the second macbook has the same problem. Could anmy one tell me why this is happening? If your a Macbook user with windows, did you notice this kind of similar problem? Please do let me know. Thanking you.

If you have the current version of Microsoft Windows Media Player for Mac installed, there is little you can do. The WMPFM is not kept as current as the Windows version (IMO, I think MS hates Apple - and this is intentional).

Premiere Elements cause problems with Windows Media Center while streaming to TV.

Similar Messages

Maybe you are looking for