Premiere Encore and Premiere Clip Notes Problem

I am having a problem that appears when exporting from Premiere (CS4) to Encore or to Clip Notes.
The opening of my projects is the FBI warning still; this transitions to an imported 'produced by' animation; this then transitions to a 'directed by' still which then a dip to black for moment; then street sounds start -- all so far so good. Very quickly after the street sounds start in black, the actual video footage commences and this is where the problem is.
What one sees is a small image off to the lower right of the screen - the image that should be in full screen is re-positioned off screen to the right and is also lower. The only image one is seeing is the upper left quadrant of the image one should be seeing, the rest of the image, being off-screen, is not seen. This occurs for 16 frames then it snaps to the correct position.
Key points:
This is not occurring in Premiere. It occurs ONLY after exporting to Encore through the ADL (watching it in Preview), AND it occurs when it is exported to Clip Notes.
It does NOT occur if the file is exported to Encoder then checked by burning it to DVD via a third-party burn program.
There are no keyframes in the clip in question. And there are no keyframes in the clips prior.
We have checked the properties of the clip in question, the clip prior, and the clip after, and they are all identical in terms of position, etc.
Anyone got a clue?

Similar Messages

I have Adobe Premiere Elements and it will not let me export?

I have Adobe Premiere Elements and it will not let me export? It also will not let me login. It says photoshop.com is temporarily unaivalable and to check my network settings. Error 400. Can anyone help me? I need to export this video as soon as possible.

You don't say which version of Premiere Elements you're using, but Photoshop.com was discontinued last year, so you won't be able to log into it.
As for exporting -- it's hard to give you specific information without knowing which version of the software you're using and on what operating system but -- which Share or Publish & Share option are you using and what is happening when you use it?

Can't run (Media Encoder or Encore) and Premiere Pro

I finished a sequence, started up Media Encoder, then began editing a new sequence with Premierer.
The result was that after a while, Media Encoder "Not Responding".
I started Media Encoder again and this time I left the room to watch TV.
Media Encoder built the AVI file correctly.
Also Encore died when I tried to use Premiere at the same time.
Is that the rule with CS4 applications?

Harm
In EN once I click on the Build button to begin building a DVD it will take more than 30 minutes before the DVD comes out.
In the mean time I would like to fire up PR to start editing some other project.
If that is not something I can do then I can use my KVM switch to go to my old PC and produce artwork for the DVD case.
On another topic, I am in the process of making a BluRay DVD with Encore and when I clicked on the Preview button, instead of getting the neat little window that allows me to run a simulation of the DVD menu, I got a huge version of that menu that I could not manuver to get to the controller buttons.

Encore and Premiere 6.5

Hi.
I have Premiere 6.5 and want to get Encore and a DVD burner to produce DVDs.
When I export now, there is no "Export to DVD" function in Premiere - just export to tape, etc.
Does that change when you install Encore?
Is it possible to export to DVD from Premiere 6.5? Or would I export from Encore?
Thanks,
John Huston

The Export to DVD feature was added to Premiere Pro. It is not available in 6.5, even if you install Encore.
Using 6.5, you will have two basic workflow options. You can export the timeline to an .m2v file, which Encore can then import and use to make a DVD. Or you can export to an .avi file, which Encore can also import.
One advantage to going the .avi route is that Encore has an Automatic transcode setting that will make sure the video fits on the disk. You won't need to do any bitrate calculations, and I think the quality comes out very nice.

Premiere pro and media encoder CC problem

Hi guys,
I hope some of you can help me, I installed new version of premiere pro and media encoder CC and now none of them works, I can edit in premiere but as soon as I press export message apears ''sorry a serious error has occurred that requires adobe premiere to shut down'' when I try to open encoder it shut down on startup.
I'm using old IMac 2.4ghz intel core duo, 2gb 667 mhz ddr2 sdram, ATI Radeon HD 2600 Pro 256 MB, OS X 10.8.5.
This is the error report, please help:
Process:
Adobe Media Encoder CC [946]
Path:
/Applications/Adobe Media Encoder CC/Adobe Media Encoder CC.app/Contents/MacOS/Adobe Media Encoder CC
Identifier:
com.adobe.ame.application
Version:
7.2.0.43 (7.2.0)
Code Type:
X86-64 (Native)
Parent Process: launchd [136]
User ID:
501
Date/Time:
2014-02-10 08:44:28.001 +0100
OS Version:
Mac OS X 10.8.5 (12F45)
Report Version: 10
Interval Since Last Report:
1264 sec
Crashes Since Last Report:
1
Per-App Interval Since Last Report: 24 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:
7E711766-8C55-00D3-811F-852F73421407
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
terminate called throwing an exception
abort() called
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib
0x00007fff9483c212 __pthread_kill + 10
1   libsystem_c.dylib
0x00007fff8d74ab24 pthread_kill + 90
2   libsystem_c.dylib
0x00007fff8d78ef61 abort + 143
3   libc++abi.dylib
0x00007fff96ff79eb abort_message + 257
4   libc++abi.dylib
0x00007fff96ff539a default_terminate() + 28
5   libobjc.A.dylib
0x00007fff8f49d887 _objc_terminate() + 111
6   libc++abi.dylib
0x00007fff96ff53c9 safe_handler_caller(void (*)()) + 8
7   libc++abi.dylib
0x00007fff96ff5424 std::terminate() + 16
8   libc++abi.dylib
0x00007fff96ff658b __cxa_throw + 111
9   com.adobe.dvacore.framework
0x000000010022814d dvacore::filesupport::DirHelper::Create() + 813
10 com.adobe.AMEAppFoundation.framework
0x0000000104f285e9 AME::foundation::AppUtils::GetUserPresetDir(bool) + 425
11 com.adobe.Batch.framework
0x0000000105c0a842 AMEBatch::Initialize() + 2194
12 com.adobe.ame.application
0x00000001000273cb AME::app::AMEAppInitializer::AMEAppInitializer(exo::app::AppInitArgs&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >&) + 811
13 com.adobe.ame.application
0x000000010000ad6a AME::app::AMEApp::InitApplication(exo::app::AppInitArgs&) + 2426
14 com.adobe.exo.framework
0x000000010513e77a exo::app::AppBase::Initialize(exo::app::AppInitArgs&) + 1066
15 com.adobe.ame.application
0x00000001000141a8 AME::RunTheApp(exo::app::AppInitArgs&, std::vector<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >, std::allocator<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > > >&) + 1576
16 com.adobe.ame.application
0x0000000100056a38 main + 424
17 com.adobe.ame.application
0x0000000100003f74 start + 52
==========================
Edited by moderator to trim the crash report down to the essentials. Since these forums do not support attaching file (due to legal and security issues), we recommend uploading files using Acrobat.com’s Sendnow (https://sendnow.acrobat.com) or similar services (YouSendit.com, etc.)

Hi mawe81,
Thanks for posting on Adobe forums,
Please follow this document http://adobe.ly/1f2EHCg
and let us know if this fix your issue or not.
Regards,
Sandeep

Link to online web service or set up my own? Clip Notes Problems

I am looking for some kind of hard drive/server kit for hosting my own videos. I want send my clients links to their projects at certain stages, but not through YouTube. I have no idea how to set that up. I saw an ethernet/USB2/what-have-you Buffalo drive that I could supposedly serve from and store my archive files. Is that the way to go or is it better or more cost-effective to go with an online service?
By the way, I could not get Clip Notes to work. In fact, it crashed my computer (or Premiere anyway). I should be able send direct from the timeline, correct? It didn't do that. Instead I had to send it to myself first - save to hard drive, and then email it to whomever. I don't see how it could work anyway. I can't email a 20 MB or bigger PDF file, can I?

Running your own server would probably be much harder than setting up a page through a commercial-grade provider. First and foremost you would need to set up a server-class OS and webserver system (such as Apache running on a Linux kernel). Security becomes a big issue as you almost certainly *will* come under fire by bots looking for servers to infect. So, you'll need to learn Apache, setting up CGI, Perl and other scripts and firewalls to protect your investment. Then you still would need to set up a page with a secure entry shell to allow your clients in without letting others in (to protect NDA protected material and preventing other clients from "peering over your hsoulder" as it were).
Also, if you have internet provided by Comcast or Verizon (or similar end-user broadband), those plans *explicitly* disallow use as a server and they most likely would shut you down if they detected the presence of incoming HTTP routing on port 80, and doubly-so if you are running a commercial website for the benefit of your business. They have specific "enterprise class" broadband packages but they are typically more expensive (often twice as much as "home" packages) as they provide more consistent and reliable speeds and are usually synchronous rather than the typical end-user asynchronous broadband (ie end-user is 2Mbs down and 300Kbs up, where enterprise class would be 4Mbs down *and* up). The benefit being that people visiting your server are getting full speed *from* you as well as *to* you, and also they typically provide more robust mail packages.
Serving your own content from home is typically an expensive and extremely labor-intensive prospect, as you will almost certainly need to learn Linux/Unix as well as apache, and maybe also a robust FTP client and mail server. Serving from Windows XP or Vista is highly discouraged due to enormous security problems and downtime issues. Learning CGI, Perl and so forth is daunting at first and (if you're like me) you probably want to work on graphical content more than laboring over server duties and security details.
Subscribing to an enterprise-class hosting service can provide you with a robust, professional-looking website with almost no knowledge of HTML, CSS, Perl, CGI or other technology, and most provide a wide array of "extras" like secure password-protected content for individual users, CGI bins, mail hosting, extensive arrays of scripts to use (such as blogs, forums, online updating, user statistics, traffic analyses, etc) and many also provide simple tools for setting up your site with easy-to-use templates and so forth. I have used 1-and-1 hosting and they provide excellent service with highly-rated uptime and security as well as a ton of tools and software for site building. Typical packages for decently rated monthly bandwidth can be had for around $10 to $20 a month which is a fantastic value, compared to spending upwards of $100 a month for hosting your own server and the countless hours of set-up and daily maintenance.
Depending on the services you subscribe to with a provider, many probably have compatible systems for allowing you to publish directly to your website via common protocols and tools (using FTP or VPNs (virtual private network allowing for remotely mounted network drives)). You may need to do some research and homework, but the end result would be a very seamless work environment where you can share results with clients quickly and easily, and also allow them to comment, share notes and upload assetts for you to utilize if necessary.
-Mark

DVD Rendering and Burning: differences between Premiere Pro and Premiere Elements

I am landscape photogapher and wish to either create slide shows in Premerie or import them to Premiere from H264 1080 quicktime files generated by Ligthroom 3. I do not do frame by frame video editing. My only goal in using Premiere is to be able to render and/or burn DVD's and eventually Bluetooh compatible DVD's for play back on commercial flat panel TV's, e.g., Samsung flat panel dvd's.
Are the DVD rendering and burning capablity of Pemiere CS5 Pro and Premiere 9 Elements equivalent , i.e, are that both as likely to produce DVD's that render with natural color on commercial flat panel TV's?
My prior experience is that my Lightroom generated 1080, H264 quicktime movies have perfectly natural color on Mac LCD and other computer monitors but see very over saturated color on commecial flat panel tv's.
Discussions with Adobe tech support folks are contradictory on this matter.

The main differences between the authoring capabilities (the assembly of DVD/BD, navigation and Menus, plus burning) of Encore (the authoring program, that ships and installs with PrPro) and PrE 9 are:
1.) Encore is a full-featured authoring program, offering a lot more power and flexibility, but at the expense of having to do it "by hand," where PrE 9 is very limited in the navigation that can be employed, and it uses Menu Sets for that automation. Though PSD's, like the Menus in Encore, they have many special aspects, that must be considered, when doing any customization.
     A.) In Encore, one can create almost all sorts of navigation in the DVD/BD, limited almost exclusively to the limits imposed by the DVD, or BD specs.
     B.) PrE 9 will allow Autoplay, with no Menu, or will automatically create Scene Menus, per the Chapter Markers that you add - and that is ALL. There will      be no Into AV material. No Subtiltes. No supplemental Audio streams. Only linear navigation, or no navigation.
     C.) Menus for Encore are much more easily customized, where there are some major conventions in those from PrE, that MUST be addressed.
2.) Encore can Burn an Image (ISO) - no Image in PrE, and can Burn a BD to Folder, which cannot be done in PrE - only for DVD.
3.) Encore offers the capability to adjust Layer Breaks for DL discs.
4.) Encore allows one to adjust the Burn speed, and in PrE, one is stuck with the "fastest" based on the speed of the media + the burner
5.) Encore allows output to a Flash delivery with pretty much full navigation.
6.) Encore allows for changes in the Subpicture Highlight Color Sets, and PrE will only do that, with some Menu Set editing.
7.) Encore offers a SlideShow feature, but I feel that it is rudimentary and limited, and assemble mine in PrPro, then go to Encore for authoring.
8.) Encore is a separate program, though interfaces with PrPro with ADL (Adobe Dynamic Link), and is NOT available as a stand-alone any more - only with      PrPro.
There are probably more differences, and some of the above might not make any difference to you. Things can probably be summed up as: Encore = great power and flexibility, but with things being done manually, and PrE lacks the power and flexibility, but is semi-automatic, so probably easier to use on simple Projects.
Good luck, and hope this helps you make the decision,
Hunt
[Edit] Sorry that some of the formatting for the Outline did not translate well. Gotta' explore the Outline formatting in the editing screen more, 'cause it would probably have fixed things. Sorry about that.

Is there a path for projects between Premiere Elements and Premiere Pro?

As an educator who has been teaching FCP7 for several years, we are preparing to purchase new equipment and most likely go to the Adobe Suite. However, I want to know if Premiere Elements is functionally similar to Premiere Pro, and if it would be a good option for beginning students prior to moving to Premiere Pro.

rich experience
Premiere Elements is an excellent program and is in many respects not a second citizen to Premiere Pro.
The principles of the programs are the same. And, although some Premiere Elements features might not be as full as Premiere Pro, they
can get most of the tasks done.
Is this your first experience with an Adobe product in your teaching facilities?
If you have not, please work through or have your IT people work through the program permissions angle on this matter.
Premiere Elements works from a User Account with Administrative Privileges. With volume licensing in a school or company
environment, this can create problems.
Another consideration is the level of support help to expect from Adobe once you have purchased the product.
At the Premiere Elements level, often you are directed by Adobe to Ask the Community (us, user to user) and in some limited ways Adobe Chat.
I have noted that Premiere Pro support channels are far more "enhanced".
Will someone be looking at the tryout before purchase to assure the compatibility of the product with the computer environment and project goals?
ATR

Can I install both Premiere Elements and Premiere Pro on my computer?

I use elements but I want to learn premiere pro so I just installed it but in the process elements was deleted. I still need elements to finish projects I've started in elements. Is there a way to have both programs on my computer and use both elements when I want and premiere pro when I want?
Is it possible to open an elements file using premiere pro CS6? I tried but it didn't work.
Thank you.

ATR,
I agree completely.
Without every version, over the last 10 years, of each program, it's almost impossible to tell a poster, "Yeah, that will work... "
It's the same with Premiere (not Elements, but the program before the "Pro" designation) and Premiere Pro. I inherited a big Project, originally started in Premiere 6.5 on a Mac. I had PrPro CS 2 on a PC, and all of the Project files Opened very well. IIRC, there were a half-dozen Transitions, that I did not have, but PrPro gave me the name of the Transition, plus the TimeCode of where it was used. All I had to do was change the missing one to Cross-Dissolve (do not know why the original editor deviated from that?), and all was good. However, when Adobe went with the Pro version, it was ONLY ported for the PC - no Mac support at all. Then, with PrPro CS 3, X-platform support WAS added. If a Mac user had an earlier Premiere, or Premiere Pro Project, before CS 3, they had to find a PrPro PC-user, with PrPro CS 3, who would Open that earlier file, then Save_As, so that they could Open it on their Macs, with later versions. Real "hands across the aisle" thing. We PC guys helped many Mac users to get them up and editing, but it was tough to explain all the ins-and-outs to them. Lot of confusion in those days. We do not see it that often now, as Premiere, up through version 6.5 are fading into history.
Also, to add to that confusion, Adobe shook things up, with the release of Premiere 7.0, also officially called Premiere Pro 7.0, but also Premiere Pro 1.0, at the same time. Most countries got only PrPro 1.0, but not all. Even some Adobe Staff folk do not realize that there were three, coincidental names for basically the same program. And, as that was the point of transition to PC-only, puzzle over what version a user really has. I have had a few state that there was NO Premiere Pro 7.0, and that it was ONLY Premiere 7.0, or Premiere Pro 1.0. I have seen the boxes that show that some folk DID get a program officially named Adobe Premiere Pro 7.0. Just a bit of arcane history.
Hunt

Audio drop out in Encore AND Premiere

Strange problem. I am trying to burn a dvd with Encore. All the files play fine in QT, all the audio is there. once in Encore, it randomly picks clips to not play audio AT ALL. Sometimes it will play part of a clip then drop out audio. I have re installed and tried several tricks, like bringing files into Premiere Pro to render out a different file type. Now my premiere wont play the audio randomly either and the file produced has no audio! all other audio/video apps running fine. Not sure if its a Adobe Production Studio problem or a glitch in my system, thou as I said, rest of system works fine.
Any suggestions would be greatly appreciated!!
Steve

Well, thanks for reply but I got it to work after several work arounds, thou my Adobe products still seem to be working strange(Not opening as I closed them, etc.)
So, foe giggles, here was what I was working with.
I digitized some footage from a digibeta into my Avid where I exported Quick Time reference files to be used in After Effects.
In After Effects I exported Quick Time Movies with Blackmagic codec,8bit, with 4800k audio, uncompresed. All where NTSC 29.97. Files play in Quick Time/Windows media player no prob.
Installed Blackmagic codec on my home system for the final build with Encore2.0 DVD and thats when all the fun started. Encore would play files fine but then start to randomly drop out audio at burn.
To solve this I pulled QT's into Premiere Pro2.0 and exported WAV files to swap out for in Encore. This almost worked until Premiere started to mimic the Encore problems with random audio drop out.
After several retarts of the programs ( they would both have ASIO driver problems and quit audio. I replaced my driver, still same problem. whew!)I got the files all rendered.
Wow, still with me? Thanks! so long story I finally got the QT re rendered in Premiere to DV files that worked fine in Encore.Still think I have a system bug or somethig due to the fact these programs and Photoshop too are acting "wonky", crashing out or locking up, etc.
Thanks for the intrest!! any suggestions on system checks would be great!
Steve

Premiere CC and CC 2014 not responding, won't play or allow any edits without freezing. Was working normally last night.

I've tried an uninstall and re-install of both apps, cleared media cache, have plenty of memory. Doesn't seem to have any reason to not work. It will export just fine, but will not allow any edits, or even simple playback.

>Intel HD Graphics 4000, ATI Radeon HD 7700m
Dual adapters can cause serious problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Encore and Premiere CS3 hanging while opening - EMERGENCY

I try opening Premiere or Encore on my Mac they just hang while opening ANY project file that is dated before today. I can make a new project, save it and open it...but any project made before today freezes both programs. They start loading the project and then it just hangs, with the colored wheel staying on screen until Force Quit is used. I have months of work done on this project and am literally 2-3 days away from completion, and backup projects won`t load either. I need some serious help on getting this resolved before I lose my mind and seriously contemplate quitting film altogether.
I have 3 gigs of ram, 2 x 2.66 Ghz dual core Intel xeon and CS3

One thing to try... create a new project and then import the old project into the new project
Other than that... this is for the Windoze world, but some of the steps may help
http://ppro.wikia.com/wiki/Troubleshooting

Premiere/Encore CS3: Geänderter Pfad = Probleme

Hallo zusammen,
hatte vor einem Jahr mit Premiere CS3 einen Film geschnitten und in Encore als BluRay gebrannt. Jetzt habe ich das Premiere-Projekt nochmals rausgekramt und minimale Veränderungen im Schnitt vorgenommen; die Länge des Videos ist exakt wie vorher, ich habe nur "umgeschnitten", d.h. an wenigen Stellen andere Kameraeinstellungen genommen.
Dann hab' ich die zugehörige Encore-Datei geöffnet. Ich dachte mir: Da Encore ja auf die Premiere-Sequenz zugreift, muss ich nicht mehr das ganze Menü und das Drumherum neu machen, sondern die veränderte Sequenz rutscht einfach an die Stelle der alten Sequenz.
Jetzt möchte ich ein neues BluRay-Image auf der Festplatte erstellen. Während der letzten Stunden hat Encore auch brav transkodiert, nur als es dann an's Erstellen der Image-Datei ging, gab's eine Fehlermeldung:
Blu-Ray-Objekt: "<Schnittfenster>Sequenz 01/Fertiger Film.prproj", Fehler: "Interner Fehler 11 (Dateipfad nicht gefunden)", Code: "11", Hinweis: ""
Ich vermute also, dass ich im Laufe des letzten Jahres die Ordnerstruktur auf meiner Festplatte umgeschichtet habe und jetzt irgendeine Datei (die "Fertiger Film.prproj"?) nicht mehr da liegt, wo sie vor einem Jahr noch lag, und das mag Encore nicht.
Mein Frage also: Wie finde ich heraus, wo Encore die Datei gerne hätte? Kann ich das Ziel in Encore ändern, oder muss ich einfach die Date dann an die gewünschte Stelle kopieren? Oder (und deshalb die ganze Vorgeschichte dazu) hat die Fehlermeldung möglicherweise einen ganz anderen Grund?
Danke für eure Hilfe!
Marcus

What is the difference between Premiere CS6 and Premiere Pro CC

Is there a difference between the two programs?
I am debating if to buy the Premiere CS6 or to subscribe to the Premiere CC in the Adobe Creative Cloud.

Your answer is clear but does not address my situation. I have only a Creative Cloud (monthly) subscription (no purchased version of CS6). When I first acquired Adobe Master Collection CS6 in the spring, Creative Cloud installed it and has provided periodic updates to it. Now I have downloaded and installed Premiere Pro CC, resulting in two versions of PP, both installed and maintained by Creative Cloud. While many of the installed CS6 programs have cousins labeled CC, not all of the installed apps have a CC version. I'm not understanding why Adobe does not simply come out and say to uninstall the CS6 versions (or do it automatically when a CC version is installed), or otherwise clarify where all of this is going.
I emphasize again that I never bought a version of CS6 that was installed directly onto my computer. All CS6 programs were originally installed via Creative Cloud. Confusing and definitely not the Four Seasons level of product/service that I expect from Adobe.

Video and audio clips not moving together on timeline

So every time I move my video clips in the timeline, the audio clips are not following.
I know "make a stereo pair" links up the audios, but is there any way to make the video and both the appropriate audio tracks move together?
Thanks
D

Link them - select the video and audio tracks and press ⌘L.
Patrick

Premiere Encore and Premiere Clip Notes Problem

Similar Messages

Maybe you are looking for