Premiere Pro 2014 MultiCam forgets cut points when rendering (Adobe please help!!)

I have started using multi-cam and notice that almost always when using multi-cam the rendered results are incorrect - with many camera selections forgotten or flipped to exact opposite!
Very frustrating - especially since you discover after render!!
Many times when I select Camera A at some point and then later go to beginning of sequence - many of the selections have been reversed with reversal again at clip transitions - resulting in exact opposite of what I selected or random changes. Locking the tracks does not prevent this. It seems to be overriding my choices based on some program logic!!
This is with latest Premiere Pro 2014.1 {8.1 build)
Useless feature if you cannot get it to render your selections but rather random selection
Wish there was a manual! And not just incomplete video tutorials that are teaser for some associate's paid training (of unknown value).
Or at least quick forum / support response from Adobe representatives so I can be productive with the tooling.
Another week of no answers and I will have to recreate in FCP X where multi cam seems to work fine.
Not the best for brand loyalty, eh?
Please help

I'm thinking it might be operator error on this one.  Here's a process that works every time.
1. Create a sequence matching the specs of your footage.
2. Add your clips.
3. Sync manually.
4. Create a second sequence matching the first.
5. Nest the first sequence into the second.
6. Right click on that nested sequence and choose Multi-Camera>Enable
7. Turn on the Multi-camera view in the Program Monitor.
8. Play the sequence in real time, switch angles using keyboard shortcuts.  If you make a mistake, leave it for later.
9. When you're done with the first pass in real time, go back to the normal view in the Program Monitor.
10. Move through the sequence a second time, cut by cut, tweaking as necessary with the Rolling Edit tool (shortcut N).
On a side note, 2014.2 is actually the current version.  You should update.

Similar Messages

  • How do I reveal the cut points when editing Adobe Connect recording?

    Since the roll-out of AC 9.1, when I edit the timeline of a recording I see the timeline of the position of my cursor ON TOP OF the timeline point of the cut points, therefore I can't see where I'm about to cut a recoring. How to see the cut points when editing the timeline?
    Thanks,
    --Kevin

    Hi Kevin,
    There is a know bug for the black marker overlapping the time-line with a black marker.
    But we have a trick to help you do your editing effectively. Follow the steps mentioned below and you will be able to edit your recording with precision:
    1. Pause the recording from where you want to start your editing.
    2. Double Click on the LEFT marker. It will take both the markers to that point on the recording timeline.
    3. Play the recording and pause the recording again at the point till where you want to edit the recording.
    4. Double Click on the RIGHT marker. It will take the right marker to the end point of your to-be-recording.
    5. Cut and Save.
    Do let us know if this helps!
    Thanks
    Sameer Puri

  • Adobe Premiere Pro CC constantly crashes when rendering. Please Help!

    Hello everybody and thank you for reading!
    My problem is whenever I use adobe premiere and decide to render my video my computer crashes and always gives me a different error report. Here are a list of all of the error codes I have received: SYSTEM_SERVICE_EXCEPTION, BAD_POOL_HEADER, NTFS_FILE_SYSTEM, /IRQL_NOT_LESS_OR_EQUAL,KMODE_EXCEPTION_NOT_HANDLED (NETIO.SYS), and DPC_WATCHDOG_VIOLATION. I have tried installing a reinstalling the program and that does not work.
    Here are my system specs:
    OS:Windows 8.1
    CPU: Intel core i7-4790k 4.00 ghz
    GPU: NVIDEA zotec GTX 750 ti 25b
    RAM: 2x 8gb
    HD: 1TB Seagate
    If there is any other information you need I will try to supply it! Thank you very much!

    Moving the discussion to Premiere Pro.
    Thanks,
    Atul Saini

  • Premiere Pro to Media Encoder to .MP4 not working? Please help

    I'm trying to export my Premiere pro project to my iphone .MP4 . I just did it last night for the first time, went to the encoder. Today I think I did everything the same but the .MP4 won't sync to my iphone. Then, I tried it again and now it's exporting two files, one being a .AAC file and the other file has varied. .m4v and .m4v.md0. I just want to export to .m4v, I didn't think it would be this complicated, especially when it worked flawlessly last night. Any insight will be appreciated.

    Hi Andrew,
    Which preset did you use?
    Thanks,
    Kevin

  • Premiere Pro CS6 to CC, Graphics/Font to Light.  Please help.

    I currently use Premiere Pro CS6 and have been hesitant to make the switch to CC version because I can not figure out how to fix this issue.   I have on going projects that use the same template setup with text size and placement and when I use CC all of the font seems to have a lighter less bold quality to it.  All the text is Ariel Standard at 100% black.  However, the text weight and color is lost in CC with the same setup from CS6.  The only fix if you want to call it that is copy and pasting a second text layer of the same text over itself and then it is comparable.   Any ideas, suggestions would be greatly appreciated.   I feel like the gamma is different for the text/fonts/graphics inside CC.  Graphics that I import are fine, it seems to be graphics/font created inside Premiere that are affected. 

    You might want to go read in http://forums.adobe.com/community/premiere/hardware_forum?view=overview
    Starting with the FAQ drop down list at the top of the page for many articles/ideas

  • Premiere CS4 doesn't launch media encoder when exporting. Please help!

    Trying to finish up a project but my school just upgraded to cs4 this week. It's running on a mac. I tried to export to no avail, watched a tutorial and saw that media encoder is supposed to launch on export. Since it wasn't launching, I went to media encoder and launched it seperately and re-exported. It still did not work. Is there a patch that needs downloading? Please help me get through this. I need to wrap this up ASAP.
    Thanks!

    Here's a great thread I found. Not the answer I was hoping to hear though...
    http://forums.adobe.com/thread/387485

  • After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of

    After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of a solution."  When I used the trial I never received this message.  Now after purchasing it I receive this error each time I open PP and am unable to use. it.  Any ideas or support to fix this issue?

    What does the detailed crash report say?
    And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

  • Is there anyway to have Premiere Pro recognize the "in" & "out" points and the sequence's "home" (first frame) as edit points so that the up & down arrow work as short cuts on these areas?

    Is there anyway to have Premiere Pro recognize the "in" & "out" points and the sequence's "home" (first frame) as edit points so that the up & down arrow work as short cuts on these areas?

    Hey guys, I wrote a big long speech trying to be more clear and was just getting more confusing. LOL
    Hopefully this image makes my question a bit easier to understand. In green you can see how the up and down arrow keys land while in Final Cut. In red how they land while in Premiere. I'd like them to land like Final Cut. Thanks!

  • Failure to import fcp7 project's xml into Premiere Pro 2014.  Details below.  Why is it crashing? Any thoughts?

    Here are the details of my problem:
    Premiere Pro 2014 (up to date)
    Mac book Pro OSX Yosemite 10.10.1 with 2.8 GHz Intel Core i7 processor
    Source footage includes a variation of codecs as follows: H.264 in a .mov container, 1920 x 1080 Apple Pro Res 422, Linear PCM
    There are no error messages, the import into Premiere Pro 2014 begins normally but the "progress bar" never starts and then after about 10 seconds a blank white box appears followed by the pinwheel.
    When the problem occurred I was trying to import a fcp7 project's xml file into Premiere Pro.
    I emailed Adobe Support Tech the fcp7 xml file and it crashed his computer, however, I was able to successfully import one clip from fcp7  (an Apple ProRes 422, Linear PCM, duration 1 minute) from the fcp 7 project into Premiere Pro, but not the whole project or the bare essentials (the cut itself).
    I am not running other software
    Do you have any third-party effects or codecs installed?  Not that I know of...
    Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU). ??????
    I am using Mercury Playback Engine GPU Acceleration
    The problem only happen when I try to import the FCP7 xml project file into Premiere Pro

    Hi Lynn,
    Have you inspected the XML file for any anomalies? That might be a way to see if any third party effects were used.
    Thanks,
    Kevin

  • Bug in Premiere Pro 2014.1

    Hello everyone,
    there is a bug in Premiere Pro 2014.1 (81) - when you want to replase klip from bin or from sourse monitor on klip in your timeline (and speed of your clip on timeline is not 100%, it is set to 50% , or 60% - it is not matter) it happends, but it replaced not from moment, that you are deside (with your IN button), it replaced from the another point of the video. It happends only if your klip on timeline is not set on 100% speed (then it is on 100% speed - everything is work perfect). In previus build (AP 2014.0.1 (21)) all work perfect in any case .
    Maybe someone faced a similar problem and knows its solution ?
    Best regards , Alex

    Anyone from Adobe care to offer some insight as it's something that is reportedly fixed?

  • My Program and Source Monitor Stopped Working: Premiere Pro 2014

    Heres how it all started.
    I got an error which said I didn't have the correct video modules, then came the ugly face of BSOD. I restarted, tried again, same result. I did a system restore with Windows, reinstalled Windows 8.1, reinstalled all of my plugins and Adobe CC programs, and when I opened my project was completely scrambled. Uninstalled all Adobe software, ran CC Cleaner, reinstalled. This got the audio in my videos to work but now there's only a white screen on my my Source and Program monitor when I try to play my timeline. I did another system restore on Windows, went to my laptop manufacturers website and updated my bios, graphics driver, and processor. Also reinstalled windows updates, and my Adobe software, I've tried CC Cleaner before each install, tried going back to the previous version of Premiere and still nothing in my source or Program monitors.
    MSI GE70
    Intel Core i7 4700MQ Processor
    NVidia GeForce GTX 765M / 2GB GDDE5
    12 GB Memory
    using .MTS footage from a Canon C100
    Premiere Pro 2014.2
    Things I've tried from other threads:
    -I read that there might be a problem with the .MTS files so I've also tried starting a new project with .MOV files and h.264 and still nothing.
    -I tried going into the project settings and choose "render with software", still nothing.
    -I tried emptying media cache files under C://users/my user/app data/roaming/Adobe/common.....you guessed it, NOTHING.
    -I tried using my daughters "Frozen" magic wand we bought her for Christmas to fix the problem with icy magic like Elsa did in the movie.......surprisingly, still nothing.
    Any other ideas out there?

    Hi,
    Do you have Dual Graphics Adapters? You can check that under Device Manager > Display Adapters.
    If yes, Disable Intel Graphics and see if it helps.
    Have you tried to Trash the Preferences?
    Rename the 8.0 folder to trash the preferences: <drive>\Users\<username>\AppData\Roaming\Adobe\Adobe Premiere Pro\
    Thanks,
    Rameez

  • Premiere Pro 2014 is crashing and freezing and I have to use force quit to get it to shut down.

    Premiere Pro 2014 is crashing every day. i am running Premiere Pro 2014 on a 2013 imac with 3.4 GHz Intel Core i5 with 16  GB RAM. Playback on premiere continually freezes and the program crashes. Or the playback will start to freeze and then I save and close the project file/program, but the program will not close and I have to force quit. This is extremely frustrating. Premiere Pro CC was super stable and I rarely if ever had a problem. I have changed my permissions to give myself read/write. I have created a new project file in 2014 and then imported all my sequences from my updated project file but none of these strategies have worked. I am considering creating a new project file and going back to working solely in CC because I am on a deadline and troubleshooting this issue is taking up so much time.

    I have had to force quit PP CC four times today. The fourth was when it crashed while trying to reopen it. I have had exactly the same problems as described above. I have no solutions to offer. I will go through a week of constant Premiere Pro bugs and poor performance then experience a period that seems too good to be true only to end up having a day like today. I can't believe that they call this a professional editing suite. It just wastes so much of my time pissing around trying to fix things and managing all the extra render and preview files it makes each time I have to save a new copy of a project which usually results in renaming it. It gets confusing after a while. Really not happy with this and have begun to learn Avid so as soon as this project is done, PP will be history.

  • "Adobe Premiere Pro 2014.1 has stopped working" Open Project Error

    Hey, everyone.
    I recently tried to re-open a project file that I created earlier today. As soon as it loads, the familiar "Adobe Premiere Pro 2014.1 has stopped working" window comes up.
    I created a new project file and it seemed to work fine. When I first started this project, I was having trouble using a ".m2ts" AVCHD movie file (PPro would crash in a similar manner), so I used Media Encoder to change it to a ".mov" Quicktime file. Seemed to work fine after I did that. This new issue only arose once I tried to re-open the project file after shutting down the computer.
    Got any suggestions?
    -Ross

    Correction - I converted the ".m2ts" file to an ".mp4" file, not an ".mov" file.

  • Premiere Pro CC Multicam - 2 camera angles being split into multiple tracks

    I love CC's multicam feature, but keep having this problem:
    In Pluraleyes, I would lay all my Cam 1 material on video track 1 (multiple clips), then Cam 2 on video track 2 (multiple clips), add my audio, and create a multicam track that kept all Cam 1 clips on track 1 and all Cam 2 clips on track 2.
    in Premiere Pro CC, multicam creation can only be exectued via the browser, not the timeline. So Premiere syncs everything up and throws each clip onto the next video track up, leaving you with a mountain of timeline media that reads out tiny and jumps all over the place when viewed in the multicam monitor (see picture).
    What I'm after:
    - the ability to create multicam sequences based on the timeline (lay out all clips from each cam on whichever video track I want, select all, then choose "create multicam sequence") so that the end result isn't 20 video tracks I have to manually collapse into 2 (time waster).
    Help Adobe?
    thanks
    jesse

    I know this is a rather old post, but have been having a play with multi cam for a while and watching a few videos so help this helps.
    What I do to get rid of extra cameras that are generated with each new multicam process.
    The process im mentioning is very briefly mentioned in this clip : Adobe Premiere Pro CC Tutorial | Performing Multi-Camera Editing - YouTube
    Once I have made my multicam source file.
    Drag to new sequence icon (similar to what is done with a clip and want to make a quick sequence from clips properties.)
    You will have the green nested footage (this will have multicam enabled by default.
    Ctrl + Double Left click the green bar. This reveals all the clips and audio.
    Arrange the clips onto which ever video layer you want (each representing a Camera)
    Double click the the sequence created to reset the sequence to have the green bar for editing but with only 2-3 cameras as desired and not the 12 you dread.
    First time poster, sorry if not overly clear.

  • Premiere Pro 2014 upgrade question

    Heya.
    So, a while back I upgraded Adobe Premiere Pro to Adobe Premiere Pro 2014. But when I did, instead of just upgraded I was given 2014 as a separate program and I still had the original. It didn't seem to affect anything, so I paid it no mind and just proceeded with 2014. Lately though, all my adobe programs are working for only 15~20 minutes before slowing down to a snails pace and then freezing all together. At first I thought it was my lack of free disc space, so I deleted enough junk to put me at 83GB. But the programs are still sluggish after only a little bit of use. So my question is: What will happen if I delete the original Adobe Premiere Pro (in order to make more space)? Will I still have 2014, or can it not exist on my computer without the original?

    Separate installs, separate functionality. Uninstalling older versions will drag down shared components, though, and necessitate a reinstall of the other product. Won't fix anything for you, though, I can tell you that. Your system is most likely simply showing signs of wear like fragmented disks or temp folders filling up just as any update to Windows or a driver could interfere operations. Do some housekeeping and check your settings.
    Installation Preparations | Mylenium's Error Code Database
    Mylenium

Maybe you are looking for