Premiere Pro CC 2014 Does Not Import Panasonic GH4 Spanned Files as a Single Clip

Premier Pro CC 2014 does not import Panasonic GH4 spanned files as a single clip. I have made a short video that shows the problem with the GH4 footage and it show how the Canon XA-10 footage imports correctly.
Is this a known problem? Am I doing something wrong? It makes the Master Clip Effects in Premier Pro useless because every spanning fragment is turned into a master clip.
Problem demonstration video: http://screencast.com/t/03wzQoxAUXAQ

Jim,
I've looked up all sorts of MP4/MOV comparisons on the web ... most conclude that mov is perhaps a bit "safer" on an Apple OS and mp4 "safer" on a PC and non-Apple "devices", but generally list the contents of the two as being nearly indistinguishable. I do realize the Qt has had ... issues ... within the Adobe programs, especially on PC's.
You have any other good info? Always looking to learn from the more experienced ...
Neil

Similar Messages

Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

You haven't given us much to go on here. What exactly are you doing and what exactly happens when you try? Which specific version of each program are you using? (Go to Help>About...)
On a side note, a simple, brief thread title is all that's needed. Something like "After Effects Issue" would be fine. You don't need the full question there.

Premiere Pro CC (2014) does not show preview!?

Hello there,
I've a serious problem. Premiere Pro CC 2014 does not respond in the preview monitor.
It's not like the program doesn't answer but it's only the way of working with footage.
I can't watch my footage but I can set in- and outpoint. I can't work because I can't see anything.
What's the matter? How can I fix this?
Thanks

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Premiere Pro CC 2014 will not import MOV files

As of about two weeks ago, my Premiere Pro CC 2014 stopped importing my Canon MOV files. Never had a problem before. I've had to edit in CC to work around this. They import fine there.

Jim,
I've looked up all sorts of MP4/MOV comparisons on the web ... most conclude that mov is perhaps a bit "safer" on an Apple OS and mp4 "safer" on a PC and non-Apple "devices", but generally list the contents of the two as being nearly indistinguishable. I do realize the Qt has had ... issues ... within the Adobe programs, especially on PC's.
You have any other good info? Always looking to learn from the more experienced ...
Neil

Premiere Pro 2.0 will not import --

Premiere Pro 2.0 will not import mov, wmv, avi, mp4 or avchd files. What format does it want? OR does this have something to do with my Win 7 machine not having the right codecs? If so, which ones are the right ones and how do I install them?

>not compatible with W7
Right click the program icon and select XP compatibility from the pop-up option list
Also right click the program icon and select "Run as Administrator" to see if that helps
If you have W7 Pro... read ONE example of using Virtual XP http://forums.adobe.com/thread/702693
-And http://windowssecrets.com/newsletter/using-windows-7s-xp-mode-step-by-step/

Premiere Pro Project Manager does NOT include After Effects files.

Warning: Premiere Pro "Project Manager" does NOT include the After Effects 'dynamic linked composition' files associated with the project when "Collect File and Copy to New Location" resulting in the incomplete and loss of all dynamic linked compositions in the new project destination ( folder or disc drive ) .. I know this also includes Photoshop dynamic links and assume includes Audition audio files as well.

Here's the best way: Personal Responsibility.
Put all of your project files in one file. Stop asking PPro to do it for you. It's simple. This is a no-brainer. If you create a linked comp, create it in the same file as your PPro project and files. When you send it to Encore, create the Encore project in the same folder. Works all the time, every time. When you're sure that you're finished with the project for the forseeable future, move the entire folder off your workstation into storage. Do I move a copy of each asset (video clip, image, audio, etc.) into this folder before I import it to my AE or PPro project? Yes I do. Is it overly time-consuming? Not really. I can fly on my machine. Does it beat not being able to open a project later. Oh yes. Yes it does. I'd say I did 50 projects last year this way. When I occasionally had to move a project folder back to the workstation, I had no problems. Everything worked as it did before I off-loaded it. That's because I take personal responsibility for my projects. It's imporatnat that theyt work, especially if I end up having to hand it off to a third party down the road.
BTW, my workstation is RAID 0. If you are using anything less, you need to upgrade. What I'm trying to tell you is that my system works very well. I have not always done things the right way. I have had my share of frustration. The point is that I learned. Now I'm passing that on to you. I use CS5 on an HP Z800 with a measely 12 gigs of ram and a single i7 quad core and the aforementioned RAID 0 configuration and a hacked Nvidia GTS 450. It works quite well. I'm sure I would do even better with another i7, 12 more gigs of ram and a Quadro 4000, but this is what they give me to use.
Additionally, I'm using CS5 at home on a MUCH older HP xw8200 dual dual Xeons, 12 gigs of ram and software-only MPE. Guess what? It works quite well.

Premiere Pro CC 2014 will not play

I usually like to wait a few months before updating, but I had an issue with a client and needed to get the new version of Premiere Pro CC.
Premiere Pro CC 2014 will not play in Source or Program. Clicking play button or spacebar causes play icon to change from start to stop, but nothing happens. I'm on a late 2012 iMac. i7 Processor. OSX 10.8.5

I'm Windows, but some saved Mac links to read that MAY help
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0

PREMIERE PRO CC 2014 chapters not showing up in ENCORE now after update

Upgraded from 2014 to latest revision version.
Straight export from Premiere Pro CC 2014 to Media Encoder CC 2014.
Queue up to Media Encoder.
H.264 for Blu-ray.
When I import to Encore for timeline, no chapters are showing up now.
Always did before.

I'm using the following programs on Mac OS X Version 10.9.5:
Encore version 6.0.0.492
Premiere CC 2014 version 7.2.2
Media Encoder CC version 7.2.2.29
I'm having the same exact issue described above, but the xml in my .xmpses file does not match what you've listed above. The end of my .xmpses file reads as follows:
</stMkr:MarkerInfo>
        <stMkr:NMarkers>38</stMkr:NMarkers>
        <stCap:CaptureTimecode>
            <rdf:Seq>
              <rdf:li rdf:parseType="Resource">
                  <rdf:value rdf:resource="Capture"/>
                  <stCap:index>0</stCap:index>
                  <stCap:capturetime>00:00:00:00</stCap:capturetime>
                  <stCap:time>00:00:00:00</stCap:time>
              </rdf:li>
            </rdf:Seq>
        </stCap:CaptureTimecode>
        <stCap:NCapture>1</stCap:NCapture>
      </rdf:Description>
</rdf:RDF>
</x:xmpmeta>
</UserData></SessionFile>
And I can't find the "Duration>0</StreamDuration>" anywhere in my .xmpses file. Yet, I'm still getting the "Error parsing MPEG metadata file. Deleting or renaming "E:\YourVid\test.m4v.xmpses" will allow you to import, but any markers will be lost." message when trying to import as a timeline in Encore. Is there a new workaround that you know of? Thanks for any help you can give!

Premiere Pro CC 2014.2 not stable on my system

Mac OS 10.10.1
I am having problems with Premiere Pro CC 2014.2 that make it almost unusable on my system. All other software, including AE, Audition, Prelude, Photoshop etc. working well.
The symptoms, which are not specific to any one project - but seem to effect all equally - are:
1) Intermittently, I loose the ability to play clips or the timeline. I can drag the playhead around, but nothing plays, nor does the viewer or program monitor change or update. I can't use the space bar for play, nor can I click the play button with the mouse. Either action requires a re-start.
2) Exiting the application, Premiere Pro will not completely shut down. It goes into some kind of limbo state. The only way to shut the application down is to use the Force Quit command from the Apple Menu. Once the application has been Forced to Quit, it will not restart until the computer has been restarted. It will just bounce up and down in the dock and never launch completely. The only way to launch it again is to completely restart the computer. If the application has been force quit, when I shut the computer down, I get the spinning wheel for a very long time during the shut down process, but the computer does completely shut down on its own. After I restart, Premiere Pro starts up promptly.
What I have done so far:
Verified Disk Permissions
Run Disk Warrior on all disks.
Trashed Premiere Pro preferences
Uninstalled the Premiere Pro app, and then re-installed a fresh download.
My computer specs:
And I am connected to 2 Thunderbolt Pegasus Raids for the media.
Any help much appreciated.
MtD

Kevin Monahan wrote:
Is your Mercury Playback Engine set to CUDA or OpenCL? Make sure it is in CUDA.
Yes, it is.
Does this happen with brand new projects, as well?
Yes.
Have you checked the permissions of all your Adobe folders? Are they set to Read Write?
They were all set to read/write, I did the procedure as outlined in the link.
Have you checked the permissions of your Mac HD and your media drives?
Yes.
If you create a new user with Admin privileges, does that work better?
I have not tried this yet.
If you disconnect your media drives do you see any improvement in stability?
No.
This problem does not, to me, seem to coincide with the either the OS upgrade or Software upgrade. It has begun to appear over the last week or so, and is occurring more and more often.
Any help you can give appreciated.
MtD

I am trying to screen capture a simulation session in captivate 6 and then edit it in premiere pro cc 2014 when I import the video into premiere, it is blurry

Caveat - I am relatively new to adobe captivate and premiere, so hopefully this is a simple setting issue that I have not been able to figure out. When I do a video capture in captivate 6 the output mp4 is very clear. If I play it in windows media player it is crisp and clear. If I import that same mp4 into Premiere Pro CC 2014, it is very blurry. My simulation has gauges and dials that need to be clear and I need to "mix" audio, narration, and system sounds into this video. Any help would be extremely appreciated!

OK - back to my caveat. When I select preferences in Premiere and look at the playback setting, I get options for Preroll, Postroll, Step forward/back many, mercury transmit, Audio device, Adobe DV and disable video output when in backgroud (all of which I am not smart enough to comprehend).
I apologize for my ignorance. So as I continued to read your question, I, of course googled "how to set playback resolution in premiere pro" and I learned how to do that.... They were set to 1/2. I adjusted to full and it seems to be clear now.... I think you just helped me, help myself. Thank you! Did I get it right? Is there any more you can recommend when it comes to taking a screen capture video and making it into an awesome demo?
Thank you, Thank you, Thank you,
Troy

Flickering footage in Premiere Pro CC 2014 but not in Premiere Pro CC 2013

Hi guys,
I've been having repeated issues with Premiere Pro CC 2014 on Windows. Basically my footage has a weird strobe/flicker when in the suite and when rendered off even although the footage looks fine, unaltered out of the camera. I rendered off the same footage in the 2013 edition of the software and there is no flicker/strobing going on. I've included one of the worst effected shots in CC 2014 and CC 2013 for comparison.I also experience graphical glitches occasionally when rendering. Please watch below:
Premiere Pro CC 2014 - strobing (300% speed, cropped 15%, RGB curve adjustment, software rendered)
YouTube
Premiere Pro CC 2013 - strobing (300% speed, cropped 15%, RGB curve adjustment, software rendered)
Premiere Pro CC 2013 - no flickering - YouTube
The footage was shot on a Nikon D3200 at 1080p 25fps, aperture 3.5, shutter 1/50, ISO 400.
Editing on a
Dell Optiplex 9020
Intel i5-4570 3.2 Ghz
4 gb Ram
Intel HD Graphics 4600
Windows 7
Has anyone else experienced this issue? My suspicion is an issue with either my graphics card or insufficient RAM.

Thanks for posting that info. This mirrors the issues I'm seeing with DSLR footage.
It's so hit or miss if it's going to flicker. I'll delete renders and re-render and certain clips will be fine, others are now flickering. I tried to make a test project that demonstrated this issue, but couldn't reproduce the effect. RGB Curves and Three Way CC are in my list of effects, as well, where I see the issue.
Just curious, is anyone else working on projects started in other versions/computers? I've seen it on project started in PPro CC and finished in CC'14. Saw it again on a project started on Mac in FCP7, converted to CC'14 Win7. Quite honestly, I haven't been starting projects myself in CC'14 because of the flicker issues.
As a workaround, I was hoping to import the CC'14 project back into CC or Media Encoder CC, but no luck there.
Another issue I've had with CC'14 includes converting a CC project to CC'14, giving it to a CC'14 Mac user and the A/V sync is lost. We abandoned that collaboration all together because of the issues. CC'14 has been incredibly unproductive to my workflow, despite the great interface update and various other features added. I haven't had mystery issues like this since CS4. I'm keeping our post team in CC as much as possible until the issues are resolved.
-JB

Adobe Premiere Pro CC 2014 Will Not Open But other App like Lightroom will..

Hello,
Can someone please help with with this problem!?
I have just purchased Adobe Creative Student Cloud (the full set) and my Adobe Premiere Pro CC 2014 won't open when clicked on... however other App like Lightroom, indesign etc will... Can some explain why this is and help me load it up so i can start editing!
Thank you,
George

if you failed to reset the preferences, do it manually - Adobe Premiere Pro Help | Preferences
also, make sure your graphics card drivers are up-to-date.

After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

Hello, chocotac0.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
Cheers,
Jason H.

Premiere Pro 1.5 does not complete DVD burn

I have Premiere Pro 1.5 installed on a laptop running Vista Business. It is a Sony VGN-Z laptop with the following specs:
Operating System
                        MS Windows Vista Business 64-bit SP2
CPU
                        Intel Mobile Core 2 Duo P9700 @ 2.80GHz
                        Penryn 45nm Technology
RAM
                        4.0GB Dual-Channel DDR3 @ 531MHz (7-7-7-20)
Motherboard
                        Sony Corporation VAIO (N/A)
Graphics
                        Nvidia Defaul @ 1600x900
                        256MB GeForce 9300M GS (Sony)   47 °C
Hard Drives
                        313GB Hitachi Hitachi HTS723232L9SA60 (IDE)
                        Ricoh Memory Stick Disk Device (IDE)
                        Ricoh SD/MMC Disk Device (IDE)
Optical Drives
                        MATSHITA BD-MLT UJ232AS
Audio
                        Realtek High Definition Audio
I always turn off all other applications including virus software, disconnect from the internet, and set the laptop power to max performance which does not let the laptop go to sleep and so on.
So far I have only used it to create DVDs from clips uploaded from Mini DV tape recorded on a Sony HC-96 camcorder. The only problem I have encountered is that the burn to disc does not complete. There are no errors or other messages when this happens. The burned disc will play on the Sony laptop in media player, but not play on any other PC or DVD player.
If I then make a “copy” of the disc to a blank DVD+R disc, the copy of the DVD plays fine on other PCs and DVD players. It seems that the original disc created does not close properly.
Does anyone have any suggestions how to solve this?

First, some reading
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116
Second, tell PPro to create an ISO on your hard drive, use the FREE http://www.imgburn.com/ http://www.imgburn.com/index.php?act=download to write to disc... at the slowest speed possible

Illustrator CC(2014) does not open or create new file in Window 8.1 Pro

My illustrator can launch but once I tried to create a new file it would freeze and will not respond anymore.
I also tried to open existing illustrator files it just create a blank white illustrator window and does not respond afterwards as well.
I tried to reinstall the illustrator for times to fix to issue but it doesnt work.
All the other applications (photoshop/indesign...) work perfectly, but obviously there is a bug in illustrator...
Have any other people experienced similar issue and know how to fix it??

Did you uninstall then used the Cleaner tool before reinstalling?
Is a printer connected? Is the driver up to date? Printer turned on?
Do you have any third party plugins installed?
A graphic tablet?
Any other hardware?
Font management? Which one?
Have you already tried setting up a new user account (Admin) and launching from that one?

Premiere Pro CC 2014 Does Not Import Panasonic GH4 Spanned Files as a Single Clip

Similar Messages

Maybe you are looking for