Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Similar Messages

Premiere Pro CS6 won't recognize alpha channel in .tiff file from photoshop

Hey Everyone,
I'm new to Premiere Pro, but I have used Final Cut Pro 6-7. Anyway, I created a 3D text design in Photoshop to use on top of another photo in a video in Premiere. In Photoshop, the alpha channel appears fine. In Premiere Pro it is not recognized. Instead, a white background appears where the alpha channel should be. When I layered the 3D text on top of a photo (in Premiere Pro), the white still appears around the 3D text design. After I imported the file, I did click on the .tiff file and clicked on modify---->interpret footage----->alpha channel (where I deselected ignore alpha channel). Premiere Pro still does not recognize the alpha channel. Should I convert the Photoshop file to another format or is there something I'm not doing? I'm spending more time trying to figure this out than I am on putting this short video/photo slide show together. I would greatly appreciate any help anyone can offer.

Thanks Ann!!! Seriously, you just saved me hours of aggravation. I didn't know I had to select that in Photoshop. I was under the impression that Adobe product files were seamless.

HT1386 i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..

i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..

From http://support.apple.com/kb/HT4060 :
The fastest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
iPods need less power to charge them (their wall charger is half the power of the iPad's, 5W as opposed to 10W), so are more likely to charge via USB

I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.

I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...

Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

Premiere Element 12 does not recognize AVI movies.

Premiere Element 12 does not recognize AVI movies created with Casio Exilim EX-FH100 camera.
The operating system (Win 7 and Windows Media Player) recognizes these files without problems.
While trying to load an AVI movie in Premiere appears this inscription: This file type is not supported, or the required codec is not installed.
How can I fix the problem?
Thank you.
Francesco

supporto premiere elements
Thanks to your advice I solved the problem.
I installed the codec Morgan M-JPG from an existing link (http://morgan-multimedia-mjpeg-codec.en.lo4d.com/download) different from what I have proposed, this link was continually blocked by my anti-virus.
After restarting Prenmiere Elements 12 (without reboot) AVI movies of my Casio have been read.
The operating system of my PC is Windows 7.
Thank you.
Francesco

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

Adobe acrobat pro 8 does not recognize scanner

adobe acrobat pro 8 does not recognize scanner

This question will probably get responses most quickly if posted in Adobe's own forums, since it's about an Adobe product and not the iMac itself.
http://forums.adobe.com/community/acrobat
Regards.

Adobe Premiere Pro cs6 is not loading thumbnails plz help

hey there hoping some 1 can help me I've got an extremely large project going on, project file is just over 400 mb and there is alot of content, alot ,alot , scatted over a few external drives and the internal and most of the are usb 2 connected to windows 8 pro 64bit intel core i7 3820cpu 16 gigs of ram and ssd drive and we are running premiere pro cs6 , and recently its taking for ever to open up and then way to long to load all the thumbnails, i really dont know what to do , and im really new to this forum
thanks
Bryce

Hey there, hoping some 1 can help me. I've got an extremely large project going on, project file is just over 400 mb and there is alot of content, alot ,alot , scatted over a few external drives and the internal one. Most of the drives are usb 2 connected to windows 8 pro 64bit intel core i7 3820cpu, with 16 gigs of ram and ssd drive, and we are running premiere pro cs6. Recently it's taking for ever to open up and then way to long to load all the thumbnails, i really dont know what to do , and im really new to this forum
thanks. (By the way, are you a grammar teacher who's taken to moonlighting for Adobe? Just answer the freakin' question. This was written by Bryce's boss, Paul.)
Bryce

Premiere elements 11 does not recognize the external ASUS Blu-ray burner

Premiere elements 11 does not recognize the external ASUS Blu-ray burner

More on what Hunt talked about...
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
And a solution... to try even if you do not have the problems described above
Set your DVD output to a folder on your hard drive and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

The GH4 must be very new as it’s not listed in Adobe’s supported cameras, so wait until the next version of LR. Usually there is one every 3-4 months with a release-candidate available at Adobe Labs before that: http://labs.adobe.com/
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

I updated I Photos and now I can not get into the I Photos, I get a message that says "the library needs to be updated to work with this version of I Photo' I have no other updates to install. How do I update to get into i Phones? riderm622

I updated my computer with the I Photo June 2012 program and now I can not open I photo or shut off the computer because I get a message that says "The library needs to be updated to work with this version of I Photo' I have no other updates to install. How do I update the library to get into I phootos. riderm622

backup your iPhoto library and download the 9.1 update and install it
LN

Premiere cs6 does not recognize USB3 intensity shuttle?

I recently purchased Adobe premiere cs6 and a blackmagic intensity shuttle USB3 for windows. I have succesfully captured video from a deck using the media express software but premiere does not see the blackmagic device. Any ideas?

I recently installed the Intensity USB 3.0 on Premiere Pro CS6.0 windows 64 bit on an Intel Motherboard.
The capture device is installed and works fine and captures ok with the blackmagic capture utilities.
When capturing using HDMI 1080i 50 resolution on Premiere it stops after 1-2 secs.
Tried using the Video for windows capture it works fine there too but does not seem to work with Premiere CS6.
Any advise help suggestion

PP CS6 does not recognize the mp4 format!

I am used to CS6, and usually have no problem importing any high-quality video format. My hubby and I have the exact same computers and same desktop Adobe apps.
We recently changed computers, and now his desktop PP CS6 will not recognize an mp4 file, yet my desktop PP CS6 does!
How can I get the PP to recognize an mp4? And why would it recognize on one machine, yet not the other?
Help ASAP, if possible! Thank you!

Hi Muchness,
How can I get the PP to recognize an mp4? And why would it recognize on one machine, yet not the other?
Check out this FAQ: FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
Thanks,
Kevin

Premiere Pro CC does not open MOD files correctly

Hi,
I just started using the Adobe Creative Cloud as a trial, in particular the Premiere Pro CC software, since it might be relevant, I am working on a mac (completely updated as of yesterday).
I have a JVC GZ-MG505 camcorder. This device saves the video files on an internal HDD in a file format called MOD. From what I have been able to see when searching on the web, this should be nothing more than a MPEG-2 file.
So, I tried importing some video files into Premiere Pro and to my surprise, I noticed that a whole strip on the right hand side of the image is missing. The original is recorded in a widescreen (16:9) format with 720x576 pixels and Premiere Pro gives me a file with 540x576 pixels. I have tried using the Interpret Footage to change this, but it doesn't let me change the number of pixels. I also tried opening the files in Adobe Media Encoder and I have exactly the same results as in Premiere Pro. However, opening the files in VLC or mPlayer they come out exactly as expected with all the pixels there. Has anyone come accross this problem before or can anyone help me with solving this?
I could try reencoding the files with VLC, but the output file is much smaller than the input file, so I am afraid I am loosing some definition.
So, just to restate my problem, the adobe products open my MOD files without complaining, but for some reason they loose a strip 180 pixels wide on the right hand side of the image.
Cheers

Premiere Pro CC does not open MOD files correctly
That is correct: there is a bug in CC. In CS6 they work correctly.
Please file a bug report.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
http://forums.adobe.com/message/5658455#5658455
search for mod files and you will find one or two other threads.

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Similar Messages

Maybe you are looking for