Premiere Pro Won't recognize Nividia GTX 780 6 GB Graphics Card Mac Pro Tower Mavericks

Just figured this out, update to the latest driver but you will also need the Quadro K5000 driver to make it play nice so that you can use GPU acceleration.
NVIDIA DRIVERS Quadro & GeForce Mac OS X Driver Release 334.01.02
I am now able to utilize the card to it's utmost capabilities.
Make sure you also install the most up to date driver also for the card.
Solved my problem anyway and didn't want anyone else to have to dig for this solution for hours and hours.
Hope it works for you.

I've spoken with adobe, I've donne everything they ask....
It's a waste of time, I paid for this program, I paid to have adobe on my computer, and until yet no solution has been found.
I don't think this is right... so much time and nothing, no solution, no nothing....
sorry ADOBE but you are slowing down

Similar Messages

Graphics card Mac Pro (Early 2008) What is supported

I desperatly need a new Graphics Card for my Early 2008 Mac Pro.
Bellow are the listed and supported graphics cards from apple site.
None of the cards listed for early 2008 is possible (Very hard) to get here in Norway.
I've read some treads here saying that ATI Radeon HD 5870 will work on Early 2008 Mac Pro.
- Can someone please verify that this will work?
- On the Note for early 2009 The radeon HD 5870 card requires Mac OS X v10.6.4 or later and it requires the use of both auxiliary power connections?
Both auxiliary power connections. Do Early 2008 Mac Pro have this possibility?
Graphics cards for Mac Pro (Early 2008)
ATI Radeon HD 2600 XT
NVIDIA GeForce 8800 GT (part number 630-9191 or 630-9897)
NVIDIA Quadro FX 5600
ATI Radeon HD 4870, offered as an upgrade kit
Note: The Radeon HD 4870 card requires Mac OS X v10.5.7 or later for use with the Mac Pro (Early 2008).
Graphics cards for Mac Pro (Early 2009)
NVIDIA GeForce GT 120
ATI Radeon HD 4870
ATI Radeon HD 5870, offered as an upgrade kit
Note: The radeon HD 5870 card requires Mac OS X v10.6.4 or later and it requires the use of both auxiliary power connections.

Robban1978,
I have 27 Apple Mac Pro's (between work/office, home, and clients), and have four Apple Mac Pro's (just at home) and I have purchased the Diamond Radeon HD 7970 graphics cards (7970PE53GHZ) for each of the 27 computers and the graphics cards do work great in all of my Apple Mac Pro computers (2008, 2010, and two 2012 Apple Mac Pro).
The only problem is that I have to boot directly into Windows Vista, Windows 7 or Windows 8 to use the graphics cards because Diamond/Radeon/AMD have not released graphics drivers for the Radeon 7970 for OS X 10.8.x Mountain Lion (as of yet?)
See here: https://discussions.apple.com/message/20289120
See here: https://discussions.apple.com/message/20289931
See here: https://discussions.apple.com/thread/4391012
Hopefully AMD/Radeon/Diamond will release updated graphics drivers for OS X 10.8.x Mountain Lion, and I believe the Diamond Radeon HD 7970 GHz Edition graphics card is probably the best graphics card out on the market (based on it's price/performance), the only problem/issue is there are no OS X 10.8.x Mountain Lion drivers for the Radeon HD 7970 series graphics cards yet.
Hopefully AMD/Radeon/Diamond will work on developing and releasing OS X 10.8.x Mountain Lion drivers.

Mac Pro won't boot, kernel panic at boot, graphics card failure.

Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.
So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.
What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives.

HI,
*but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives.*
If you haven't done so, boot from your install disk and run the Apple Hardware Test.
http://support.apple.com/kb/HT2684
Also, you can boot from your install disk and check the startup disk for errors that might need repairing.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disk, try booting in Safe Mode
What is Safe Mode
Carolyn

Graphics Card Mac Pro early 2008

I need/want to upgrade my video card in my early 2008 Mac Pro. I am still running the ATI Radeon HD 2600 XT 256 MB card. I recently purchased the
Sapphire Radeon HD 7970 OC with Boost 3GB DDR5 DL-DVI-I/SL-DVI-D/HDMI/DP PCI-Express Graphics Card 11197-03-40G. After reading several post I thought this would work. I either got the wrong card or it's missing appropriate cables to connect. I have also watched a few installs on you tube. They are not in a early 2008 because I have to connector plugs where they show.
Please advice me on a good graphics card for my Mac Pro. I'm not a gamer but do a lot of photography work on my computer. It locks up sometimes when working with graphics.

You need 6-pin power cables to drive most and Apple's is proprietary and unlike standard PC cable
http://www.amazon.com/JacobsParts-Express-6-pin-PCI-e-Video/dp/B00OSLGBIC/ref=sr _1_11?s=electronics&ie=UTF8&qid=1425053223&sr=1-11&keywords=6-pin+power+adapter+ cable+for+pci-express+video+cards
or
http://www.amazon.com/PCI-e-Power-Cable-nVidia-Video/dp/B002UR1654/ref=sr_1_4?s= electronics&ie=UTF8&qid=1425053403&sr=1-4&keywords=Mac+6-pin+power+adapter+cable +for+pci-express+video+cards
Or OWC but they charge more (still very low cost)
And you need two such cables.

Macbook Pro won't recognize any USB storage or SD Cards

My Macbook Pro just stopped recognizing my camera SD cards and both of my external hard drives. I've been using them regularly without issues and all of a sudden nothing is recognized. The USB ports still provide power AND it recognizes my iPhone when plugged into the USB port. I'd really appreciate any help.

Problem solved! I found a thread that recommended reinstalling the OS. It took a while, but when all was done, all of my files remained intact and I can now see my external hard drives and SD cards.

My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
Quit and you should be able to install OS X now with your Apple ID and password.
see
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

MacBook Pro won't recognize 1TB external drive

Hey team,
My mid-2010 MacBook Pro won't recognize my WD My Passport 1TB drive. I was copying files from the drive to my computer when my computer went to sleep (didn't run out of power, just went to standby mode). Turned computer back on and now it won't recognize the drive.
It is a USB 3.0 cord (computer is only USB 2.0 and the cord works with other drives) and when plugged in, the light turns on and the disk spins but isn't recognized my this or other computers (also not in Disk Utility).
Tried a handful of disk recovery programs but nothing wants to 'see' the disk plugged in.
Thanks for any and all suggestions.

yes yes yes, I warn people about WD drives on this link:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
theReKleiner wrote:
What now?
Only option is to buy the SAME exact HD and swap controller boards, or pay someone a LOT more $$$ to do the same thing.
its not soldered there, its just a controller/ SATA "one piece"
They do that to save 50 cents in mfg. costs.
I mention your "issue" in that link. Which is why you do NOT buy WD ext. HD.
they make the controller board and SATA card one piece.
CURRENT MFG. THAT HAVE controller board and SATA cards as one piece are : WD USB drives, and Toshiba USB Canvio
However Toshiba didnt USED to do that, but they started doing it at the end of 2013.
avoid those 2.
To avoid that nonsense, buy Hitachi drives in USB.
Or, the best option:
Save money and invest in a bare hard drive backup and redundancy plan
Its cheaper
less fuss
more reiable, removes the nasty failure point of SATA card interfaces.
takes up lot less space.
Bare hard drives and docks. The most reliable and cheapest method of hard drive data storage, archives, and redundancies
The best method for your data archives and redundancies, which is also the least expensive, the most reliable, and the most compact option is the purchase of naked hard drives and at least one USB 3.0 HD dock ($40 roughly).
While regarding Time Machine and your Macbook or desktop, your primary backup is best saved to a conventional USB (or Firewire / thunderbolt) hard drive inside an enclosure, the most important part of your data protection begins after your 1st / primary Time Machine / backup; and these are your secondary (most important) data storage devices, archives and their redundancies.
However bare hard drives and docks (below) also work perfectly as a Time Machine backup, this is for home use, since the docking station is certainly not very portable as a notebook Time Machine backup device should be; nor should bare HD be packed around with a notebook, rather remain at home or office.
Six terabytes of 2.5" HD pictured below in a very compact space.
Bare hard drives and docks have the lowest cost, the highest reliability, and take up the smallest storage space
Drawbacks:
1. Care and knowledge in general handling of naked hard drives (how not to shock a bare HD, and how to hold them properly). Not a genuine drawback.
Advantages:
1. By far the least expensive method of mass HD storage on a personal basis. Highest quality naked HD can be purchased in bulk very cheap.
2. Eliminates the horrible failure point of SATA bridges and interfaces between external drives and the computer.
3. Per square foot you can store more terabytes of data this way than any other.
4. Fast, easy, no fuss and most simplex method of data storage on hard drives.

Mac Pro won't recognize ethernet connection

My Mac Pro won't recognize the Ethernet cable when it's plugged in. I know the cable and connection are good because my MacBook Pro recognizes it with no problem. I've had it for around a year, but have always used the airport to connect to the internet. It has two Ethernet ports on the back and I've tried both. Is there anything I need to do to configure the NIC card?
Thanks in advance!
Ryan

No, but you do need to configure the Ethernet port in Network preferences. Open Network preferences and select the Ethernet port. Click on the Advanced button then on the TCP/IP tab. Set the Configure IPv4 drop down menu to DHCP. Set the Configure IPv6 drop down menu to Off. Click on the Apply button. If all is well you should see a valid IP address in the network settings for the port. If you see an IP address starting with 169., then it means your Ethernet port is not getting an IP address from your router. You should have an Ethernet cable connected from the Ethernet port on the computer to one of the LAN ports on your router.

Mac Pro doesn't recognize USB 3.0 PCI express card

Mac Pro doesn't recognize USB 3.0 PCI express card. Does it need specific drivers?

I did a little searching for that card. The more I looked at it the more I felt that, yes, it needs a driver, and no, one doesn't exist for the Mac. So it looks like that is a card only supported for PC's. But to be sure, if I were in your place at this point, I would contact MSI directly.

Macbook Pro won't login after sleep (sleep with low battery -- mac turned off maybe it's called save sleep)

Macbook Pro won't login after sleep (sleep with low battery --> mac turned off maybe it's called save sleep)
So if I hit the powerbutton my mbp booted like it is booting from the save sleep (so very fast and the login screen is there in about 10 sec.and there is no apple logo while booting just the desktop screen in "unsharp" ore foggy however...)
Then when i see the login (if the keyboard backlight turned on) i wand do tipe in my code but it won't work... the trackpad is not working; and when i plug-in a usb mouse the mbp is not powering on the usb-mouse (laser is off)
Why is that this way?
Is there n option to wake up the mbp fromm deep/save sleep without haveing issiues after that?
THX

Sorry for such a long delayed response...
I was able to get to an apple store this past weekend, and let me tell you... I'm about finished with there great "support".
Right before I went to the store, I tried to eject a disk. Well the cloth in the SuperDrive (I assume to protect the drive from dust and such) Pulled up with my disk. So I get the Apple store, describe my problem and what happened with the cloth piece. The "Genius" writes up a form and tells me they have to run diagnostic and it will take a couple days... and I will get a call when its done (1-3 days).
Well on day number 3 I called up the store and they told me it was ready to be picked up? I asked if anything had been fixed and they told me they could not reproduce my "sleep issue", so they couldn't fix that.. but told me the cloth piece in the SuperDrive had been fixed.
I drive an hour (one way) to the Apple store to find that all they did was PULLED OUT the cloth... they did not replace it! So basically I have a hole for a Super Drive.
I asked why I was not called to say that my computer was ready to be picked up... didn't get an answer on that one.
I asked why my SuperDrive was said to be fixed, when nothing was done... they told me that it would have to be sent out to the factory store for that to be fixed (FIRST TIME THEY MENTIONED THAT!) Oh, and that would take 5-7 business days. Well that's not going to happen right now considering I'm a college student that NEEDS a working computer!
So I go home, angry... start just putting all my important documents back on the computer. And the screen starts blinking!!!! I guess now I have the same thing described in another post on these forms...
Lets just say that I'm not very happy with Apple right now! If anybody else has success on either the sleep issue or the screen blinking issue, please let me know!
Thank you!

I have a mac pro with OS X 10.5.8., I have a mac pro with OS X 10.5.8. How do I update to a more advanced version of OS X with a download?

I have a mac pro with OS X 10.5.8., I have a mac pro with OS X 10.5.8. How do I update to a more advanced version of OS X with a download?

You need to go through 10.6.3 and 10.6.8 to get to 10.7 or 10.8. If you find that 10.6.8 isn't enough, open the Mac App Store and try purchasing Mountain Lion 10.8. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Core 2 Duo(not Core Duo) or better CPU with at least 2GB of RAM, and if it does, phone the online Apple Store and order a download code for Lion 10.7.
(85026)

HT1209 I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?

I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?

Thanks roaminggnome. Can I do that transfer wirelessly or do I have to get a large jump drive to copy and transfer. I presume that I cannot use my iPod right?

Final cut pro requires you to have a quartz extreme graphics card

When I open Final Cut Pro, it says final cut pro requires you to have a quartz extreme graphics card. However, I have used the same thing for over a year already without any problems! Please help!
It's an iMac 27inch quad core late 2009

I bet you used Software update to download a few items recently (including a recent system update), and have not yet restarted your Mac. To confirm this, launch software update, and follow the instructions. Once you restart and the install completes, relaunch FCP, and you'll probably be good.
(I just did that to myself the other day).
Hope it helps!

Supported motherboards for GTX 750 Ti graphics cards

I currently have an older HPE 410T desktop with an OEM'd MS-7613 (Iona-GL8E) motherboard (6.12 BIOS) and a 300 watt PSU. Is it compatible with any of the MSI GTX 750 Ti graphics cards? (The HP forum suggested the MSI NVIDIA GTX N750 Ti and the MSI GTX 750 TF might work.) If not, which MSI graphics cards are compatible with the system?
Alternatively, I'm considering purchasing an HP Envy 700-215xt with a Memphis-B motherboard and a 300 watt PSU. Is that system compatible with any of the MSI GTX 750 Ti graphics cards?
The reviews I've read indicate the GTX 750 Ti only requires a 300 watt PSU, however all of the MSI GTX 750 Ti graphics cards indicate they require a 400 watt PSU. Is that correct? That is, am I going to have to replace the 300 watt PSU to run an MSI GTX 750 Ti graphics card?
Thanks for any help?

Yes, you will need to upgrade your PSU. The Watt rating although recommended is just a guideline, what is important is the 12V rail Amps. So ensure you get a good quality single 12V rail supply with 20A+ on the 12V rail. And that is valid for any 750 Ti card not only MSI. The amps specified mean total for a typical system with this card. The reviews you may have read may refer to the power draw for the card itself only.
As for compatibility with your board, you will have to ask the HP support as this forum focuses on pure MSI products and not OEM. In principle it should work but if that board does not have PCIE 2.0 slots at least, then i.t may not work.

Does anyone (like me) wish for macbook pro or air (13"or smaller) with dedicated graphic card?

Does anyone (like me) wish for macbook pro or air (13"or smaller) with dedicated graphic card?

This is not the place to ask such a question. This message board is only for "techincal issues" dealing with Macbook Pros.
You can whisper your wishes over on the Product Feedback wishing well website.

Premiere Pro Won't recognize Nividia GTX 780 6 GB Graphics Card Mac Pro Tower Mavericks

Similar Messages

Maybe you are looking for