Premiere Pro

New to Premiere Pro, We shoot on DVCam or Mini-DV (which can shoot progressive), very little we shoot is ever for broadcast, most goes straight to DVD for training then archive. Would it be better to shoot in the progressive mode? I hear many editors edit strictly in progressive mode to avoid interlacing issues.
And, if progressive is better why use interlaced at all, as in 1080i, etc. Thanks

There are many cameras that have "progressive modes", but very, very few that actually record progressive frames. In fact, any camera using a tape will actually record an interlaced signal at 30 fps, regardless of which shooting mode you're in.

Similar Messages

Media Encoder CC conflicting with Premiere Pro CC

Why does Adobe Media Encoder pause while exporting a video when I try to edit another video in Premiere Pro?
On the older version I was using before I upgraded, they would both run simultaneously.
Also, is there a phone number that I can call to get direct support from Adobe?
Computer Specs:
Mac OS X ver 10.9.5
2.7 GHz Intel Core i5
16 GB 1600 MHz DDR3
Intel Iris Pro 1536 MB
Software:
Adobe Premiere Pro CC
Ver 7.2.2 (33)

Ask in the Premiere forum.
Mylenium

New (8/14) Macbook Pro Retina - Premiere Pro CC 2014 spinning beach ball

Help! Seems my shiny new wiz-bang 4-core Macbook Pro with 16 GB of Ram and a 512 solid state drive works just fine with Adobe Premiere Pro CC 2014 until my project reaches a certain size, then it won't open the project and immediately gives me the deadly spinning beach ball. The only way to exit is to force quit whereupon I get the "Sorry, a serious error has occurred...". Aggravating beyond words.
Saw one forum comment where it was recommended to update to the 6.0 CUDA driver, but not even sure I have a CUDA driver. Plenty of space left on hard drive. In Premiere Pro preferences under the "Memory Tab" it doesn't seem to matter if it's set to "Optimize rendering for.... Memory or Performance." I've reinstalled the Premiere Pro App twice. Doesn't help.
Some specs:
Processor 2.5 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro
NVIDIA GeForce GT 750M GPU PCie
Intel Iris Pro GPU Built-in
8 GB DDR# 1600 MHz (x2) = 16 GB RAM
350 GB of 499 GB left on drive
Of the 16 GB of RAM I have 11 available for Premiere Pro and the other 5 GB allocated for other apps.
Any suggestions would be greatly appreciated.

>NVIDIA GeForce GT 750M GPU PCie
>Intel Iris Pro GPU Built-in
Dual graphics adapters are a bane on civilization!!!
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0

Adobe Premiere Pro CC 2014 Crashing very often! Please Help!

Hello,
I am currently editing my first feature on Adobe Premiere Pro CC 2014 and it is currently up to date.
I am editing on a iMac 27in, late 2013 brand new computer.
Processor: 3.5 GHz Intel Core i7
Memory 32GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GTX 780M 4096MB
System: OSX Yosemite V 10.10.1
The project is located on a 8TB G Drive
7200 RPM
High Performance ThunderBolt drive.
Details of the project:
I am currently working on a fine cut of 5K Red Footage that is being cut in the RAW.
I work at 1/2 quality settings and have no lag.
The timeline includes limited stacked video files and various mp3 audio files.
The Problem:
Lately, the program will randomly quit or freeze up 4-5 times during an 5-6 hour edit session.
Many times it is random, however, it seems to happen often if I accidentally click on the end of a clip on the timeline and it goes to switch into trimming mode.
Also, it will randomly go into the "pinwheel of death" out of nowhere followed by "Adobe CC is not responding."
My project file is just about 15MB now.
What is causing this reoccurring problem?
How can I make it happen less? I have scoured the forums and found similar articles but no helpful solutions.
I have recently turned auto save on to save every 2 minutes because there have been more than one occasion where I lost A LOT of work because of this issue.
I am about two weeks out from picture lock delivery and this issue is driving me crazy and loosing me a ton of time.
Please help or let me know if any more additional information can help solve the issue.
I have sent in well over 25 error reports already.
Thanks,
Thomas.

I think I may have found the solution...
I completely removed the Premiere Pro folder under User > Documents > Adobe and so far it seems to have solved the problem.
I of course backed up my projects and than deleted this folder. So far it seems it worked.
I'll know for sure in a day or two, but after constantly crashing, Premiere hasn't crashed for the last 4-5 hours of work.
Goran

Error installing Adobe Premiere Pro 2.0 on winows 7

Installing Adobe Premiere Pro 2.0 on my new Winows 7 computer and get an error 1311.source file not found. The last file shown on the addy is Data1.cab. Does anybody have an idea why that program will not install? Thanks........

Adobe sent me the download link after I told them I have a Windows 7 system and the 2.0 was suppose to be an upgrade from the 1.5, thanks a ton and I'll call Adobe again....

PREMIERE PRO CS4 CRASHES every time I try to export to media....

Import a file in whatever format (MPEG 2, MPEG 4, AVI, etc.), I add effects (or leave the file untouched) and then try to export it to MEDIA...Then Premiere Pro CS4 crashes giving me this error:
Premiere Pro has encountered an error.
[..\..\Scr\Component\ComponentFactory.cpp-119]
After pressing "continue" it brings another message:
Sorry, a serious error has ocurred that requires Adobe Premiere Pro to shut down. We wil attempt to save your current project.
I press OK and the Crash Report dialog box appears....
I installed Premiere Suite 3 weeks ago and I have never used this software before....Premiere has never allowed me to export any file...
My Lap Top has Windows 7 Ultimate - 64 with NVidia GT 130 1 GB video card, 8 GB of RAM, 1 TB of HD and 1920 x 1080 P display...
Any advice? or somebody who has had the same problem?
Thanking you for your time and courtesies in assisting me, please receive my best regards.
AZUARO

Have you just installed the software or applied
updates also?
Updates are needed for premiere as well as Media and other.......
Ciao
Giorgio

Adobe Media Encoder pausing rendering while working in Premiere Pro

Hello everyone,
So I am redering a video in Adobe Media Encoder and at the same time I am editing a new one in Premiere Pro.
I noticed that AME is constantly pausing the rendering and did not know why. It turns out that while I'm editing a video in Premiere Pro, I am constantly pressing the space bar to start/pause the video I'm editing. While I do that, AME keeps pausing/unpausing the rendering. Somehow, pressing the space bar in PP has an effect in AME.
I have no clue why it does that because the Premiere Pro window has the focus, not the AME one.
Has anyone ever seen that?
I use Windows 8 and Adobe CC.

Hi Rallymax,
Yes I do queue footage by having an Autowatch set up on the directories where the video is written to. I rarely do a direct export unless testing new settings.
Don't take this as gospel but I too had a feeling that GPU acceleration didn't happen with AME, only direct export. Not sure where that came from, I did watch some of the recent Adobe TV Web Seminar's about new features of CC products etc, so maybe on one of those?
I found this while trying to find out where I had seen it but it is from AMD site not Adobe so whether it's fully 100% correct I dunno:
Adobe Media Encoder
The Adobe Media Encoder (AME), with support for OpenCL™ and GPU acceleration, automates the production of multiple encoded versions of source files, sequences, and compositions in Premiere Pro CC. With the GPU-accelerated AME and AMD graphics technology, editors can quickly encode projects and output files for virtually any destination. AMD GPUs handle the heavy lifting, freeing the system’s CPU to perform other functions.
I will try the same test as Jason, if I can find any AVHCD video and see what the results are. Will be interesting.

Audio in Premiere Pro CS3 appears on one PC, not the other

Hi everyone,
I'm the Network Administrator for a high school and we have a digital media lab here using Adobe Creative Suite 3: Master Collection. All systems here are running Windows XP Professional and are on a Windows domain. All users are standard users, with no administrative rights for obvious security reasons. When I originally did the deployment of the lab by running sysprep on a reference computer and using ghost to deploy the rest of the computers, I noticed a problem with Premiere Pro CS3 after the deployment. In that lab, none of the computers would capture video via firewire and the built in capture function in Adobe Premiere CS3. I believe I have a post about this on these forums that was never resolved. To get around this, I'd capture the footage for students in my office and then transfer it over to their network drives so they could import it into Premiere Pro CS3 and edit the footage.
Recently, the school purchased some HD cameras that record to a built in hard drive or an SDHC card. The idea here was that the .MTS files could be copied from the camera to the computer running Premiere Pro CS3, the media files in .MTS format [at 1280x720] could be converted using KoyoteSoft's Free HD Converter using the settings MPEG2 [a preset], MPG2 as the format, 1280x720 // 16/9, 29.97 FPS, 9000 video bitrate, and 224 audio bitrate, and then the new media files could be imported into Premiere Pro CS3 and edited using the HDV 720p30 preset within Premiere Pro CS3.
This works great...on my office computer.
The problem is that if any student tries to import their footage on a computer in the digital media lab, the converted media files, the exact same ones that just imported into my Premiere Pro CS3 installation on a computer in my office with identical hardware as the computers in the digital media lab, fail to import the audio. I can see the video with no problems in the lab, but no audio layer appears. If I right click the video file and choose Open With> VLC or another media player, the media plays fine with audio. All audio/video codecs that are installed on my machine are also installed on the digital media machines. If I right click Adobe Premiere Pro CS3 from within a student account on those computers and choose Run As and use the local administrator account, Premiere Pro CS3 does the exact same thing, it still can't see the audio. Adobe CS3 is fully up to date on both my office computer and all digital media computers.
Any help fixing this would be greatly appreciated, spring break is coming up here this coming week and I'll be here all week. Hoping to get this resolved during that time so students can edit their own movies. Again, video imports, audio doesn't. No audio layer appears.
Thanks!

See if this helps... To work with AC3 sound files in Premiere CS3, copy the ad2ac3dec.dll file from the Encore CS3 directory into the Premiere directory

Unable to batch capture with Premiere Pro CC via Kona LHi

AJA's web site claims Premiere Pro CC is compatible with the Kona LHi card, but I can't get the two to work together properly. After repeated tries, I uninstalled and reinstalled everything AJA, but still no luck.
I need to batch capture DV clips from some mini-DV tapes on my Sony MVR035U tape deck. But I also need to upconvert them from 480i to 720p60 using my Kona Lhi card. I should be able to do this with Premiere Pro CC. But the PPCC Capture window won't give me any audio feedback when I select "AJA Movie Capture" in the Capture Settings pull down menu. I only get audio feedback when I enable "DV capture" but then I'm no longer able to upconvert.
Looking forward to any feedback on this issue. Been tying all day to trouble shoot this problem.
[Text formatting removed. Please type your posts here, rather than pasting.]
Message was edited by: Jim Simon

And now with CC June 2014 you can't even capture from HDV, I need to go back to Premiere CC 2013 for that....Adobe might think tape capture is over... but it isn't totally yet...

Unable to play Cineform avi files in Premiere Pro CS3

I am using Cineform NeoHD version 5.3.2 to convert the MXF files from my Canon XF300 into Cineform AVI.
Then I import these AVI files into Premiere Pro CS3 and here is where the problem begins.
Premiere is unable to play these Cineform files. All I get is about a second of audio, and a still frame of the video. This happens both in the source window, and also on the timeline.
The Cineform AVI files play perfectly fine when using Virtualdub for playback, but Windows media player behave just like Premiere.
Everything worked fine a week ago. Premiere appeared to use something called "ffdshow" to play the Cineform files, and I could edit without any trouble.
A few days ago, when I tried the same, that's when the problems came. Whenever I hit Play button in Premiere, a popup window came up, saying Premiere wanted to use ffdshow, and the options was "never", "no once", "yes once", "yes always".
When everything worked a week ago, I had to use the "yes always" option.
Now, it does not matter which option I use, Premiere will not play the Cineform files.
I did not make any changes to my computer between the day everything was okay, and when the problem appeared.
A Cineform representative suggested "ffdshow" is the troublemaker, so I uninstalled ffdshow and removed any traces of it I could find, but the same problem still exist.
Then I uninstalled Cineform NeoHD
Uninstalled and reinstalled Production Premium CS3 suite
Reinstalled Cineform NeoHD
Still same problem, nothing has changed.
It does not matter if I use 50i or 25p source files.
My system: (Laptop)
Windows Vista ultimate 64-bit
Intel 2,66GHz quad core CPU
4GB ram
Nvidia Geforce 8800M GTX
3x internal 7200rpm harddrives set up with raid-0
Anyone else experiencing this?
Any ideas what might be wrong?

dont know , but this stuff might fix your prob.. overwrite whatever ffdshow screwed up...
cfrepair utility:
http://www.siliconimaging.com/DigitalCinema/SiliconImaging_support.html
cineform codec (neo player)
http://estore.cineform.com/NeoPlayer.aspx
never used the cfrepair thing..but did install neoplayer which gave me the codec to use cs3 with cf raw files ( sample of cf raw at the si 2k site -- avi ext )
ps.... to keep overhead down on my computer I took the resulting cineform "player" out of my startup directory....as it wants to run in background when you install it...no need for that for my purpose of just getting the codec

Premiere Pro is not interpreting transparency correctly with the Adobe Creative Cloud 1.8.0.447 update

Yesterday, I updated to Adobe Creative Cloud 1.8.0.447. I found that after the update, both Premiere Pro CC (2014) and Premiere Pro CC are not ready transparency layers and alpha layers correctly. I have some lower third logos that I use on multiple projects and they are showing up more opaque than they should. Additionally, I have an export preset that uses a watermark. This watermark is showing up more opaque than it should too. I have checked both graphics in After Effects with the new Creative Cloud update and all graphics look fine. It seems to be an issue that is isolated in Premiere. The issue only happens when there is a video layer underneath the graphics. When the graphics are viewed with no video layer underneath, the transparency looks as it should. I have attached a few images showing the problems. They show graphics with and without video layers beneath.

I was able to resolve the issue by going into File>Project Settings>General and changing the Render from GPU Acceleration (OpenCL) to Software Only. It appears there is an issue with the AMD FirePro D500 graphics card. I was told by a call tech at Adobe that there are issues with the D300, D500, and D700 Graphics cards. However, I have an Intel Iris graphics card on my MacBook Pro and was having the same transparency issue. So, I'm skeptical that the issue is just with the graphics card. The transparency issue did not start on BOTH computers until the latest CC upgrade. For now, the Software Only renderer option fixes the issue. I hope to see a fix in the next CC update. FYI: The Renderer needs to be changed to Software Only in both Premiere Pro Project Settings and Media Encoder Preferences.

What is the problem with Adobe Creative Cloud Premiere Pro CC 2014, why it freezes often?

I Purchased the Adobe Creative Productive Premium Suite CS5 in early 2010 and I was very satisfied with it all this time, I can say that I never had a problem while using any of the Production Premium applications. Few weeks ago, I asked Mr. Philip Bloom about a technical issue regarding the best method to use a 50 FPS clip with a 23.976 FPS project, and I got his kind help but he recommended me too that I should upgrade to the latest Adobe Cloud CC 2014 which has many new features added to the different programs. I took his kind advice and downloaded a trial version of all the Adobe Cloud CC programs which I use for my filmmaking business.
Today is the 20th day of my trial period and I have 10 days left to take the decision of continuing with CC 2014 or not. The past 20 trial days were not very pleasant. I want you to share with me the following details which I'll list them as bullet points and I would appreciate diagnosing the problem if you can and suggest a solution for it to re-try the Adobe Cloud CC 2014 for the 10 remaining days with no further problems.
I used to have the Gigabyte graphics card GTX 470 for about 4 years and it malfunctioned last year and I replaced it with a humble Geoforce GT 610 card, but it worked fine with the Adobe Suite CS5 programs.
My system configuration is Intel Core I7 950@ 3.07GHz , installed memory 12 GB. , Windows 7 Ultimate, 64 bit Service pack 1, 3 hard drives 1TB. each (one of them is dedicated for Adobe asset files and the editing work)
For the first 2 or 3 days I used mainly the Premiere Pro CC 2014 establishing short projects for a max. of 5 minutes each and it was working normal. But, later, as soon as I started to build a project which reached about 24 minutes of length and I began to edit those before I add more clips to the timeline, unfortunately, the PrPro CC 2014 started to freeze on any of the frames every time I try to edit normally as I used to do with the CS5, so, I had to wait for 2 or 3 minutes every time it freezes, then it works for seconds then freezes again!! and during the 20 days mentioned above it crashed once.
The movie files of my project are the Nikon's .Mov files and the editing work which I performed included effects such as Color correction (levels) color correction (fast) color correction (Auto) sharpen effect, and stabilizing effect.
I installed the Magic Bullets Suite trial version, and the Neat Video trial version, aiming to purchase either the DeNoiser or the Neat Video (but I tried their effects without saving them to the project).
I used to export parts/ or whole project before finalizing the editing process to be able to monitor on a TV screen (mp4 file format) some of the changes I made in PrPro before being freezed.
Based on my previous 5 years experience using the CS5 Suite I have a strong trust in Adobe, I never thought the problem was in the PrPro application, but rationally I thought it was the graphic card (GT610), and accordingly I purchased yesterday a new Zotac Geoforce GTX 770 (listed by Adobe as an approved card) and I installed it and checked that it is running fine and I checked the processor temperature which was within the normal level.
Only today, I began to think that it might be something wrong with the Adobe Cloud CC 2014 ( a bug or something) and as a result of searching on the internet I could see lot of users since 2014 who were having freezes and crashes with the CC and the CC 2014 versions. That was a shock for me, could it be that until Feb. 2015 the same severe problem still occurs???
Sorry for any inconvenience, looking forward to seeing a solution for that serious problem.

Hello Ashraf,
Sorry you didn't get any help on this post. In the future, please contact Adobe Support for 1-1 assistance on issues like this: Contact Customer Care
Thanks,
Kevin

AMD and Adobe Collaborate on Upcoming Version of Adobe Premiere Pro Software

AMD and Adobe Collaborate on Upcoming Version of Adobe Premiere Pro Software to Enable Breakthrough Video Editing Performance through Open Standards
AMD A-Series APU, Radeon and FirePro graphics technology work seamlessly with next version of Adobe Premiere Pro software to provide real-time editing, effects, compositing and color grading
http://www.amd.com/us/press-releases/Pages/amd-and-adobe-2013apr5.aspx
SUNNYVALE, Calif. —4/5/2013
AMD (NYSE: AMD) today announced its collaboration with Adobe Systems Incorporated to deliver OpenCL™ hardware-accelerated video editing for the first time on the Microsoft Windows platform with the next version of Adobe® Premiere® Pro. This collaboration further demonstrates AMD’s commitment to enabling partner ecosystems with cross-platform open standards, empowering Adobe to amplify the editing experience for creative professionals everywhere. The combination of expanded support for open standards and the Adobe Creative Cloud™ brings unmatched access to the most up-to-date and powerful professional post-production tools anywhere.
The next version of Adobe Premiere Pro has been optimized to take full advantage of a wider range of AMD professional- and consumer-class graphics processing units (GPUs) and accelerated processing units (APUs), delivering unprecedented real-time editing with formats from DV to HD and 4K Ultra HD at high frame rates. Now Adobe and AMD extend this advanced OpenCL functionality to creative professionals running the Windows operating system. The expanded support on Windows and OSX complements the already popular Mac OSX OpenCL support available on Adobe Premiere Pro.
“AMD and Adobe are dedicated to delivering professional- and consumer-level solutions that support open standards and provide artists everywhere with the ability to create at the speed of thought,” said Neal Robison, senior director, Software Alliances at AMD. “Through AMD’s strong relationship with Adobe, video editors no longer have to wait for the rendering of edits, effects and composites ─ most everything can now be achieved at high-quality in real-time.”
Coupling AMD graphics hardware with the latest Adobe software, video professionals and prosumers alike will benefit from seamless, high-quality feedback. The next version of Adobe Premiere Pro with support for OpenCL harnesses the power of discrete AMD graphics cards and AMD A-Series APU’s to enable real-time edits, application of dozens of effects, support for the new Lumetri deep-color engine, and multi-stream and mixed format accelerated workflows with AMD Eyefinity multi-display technology.
From its APUs and notebook graphics cards to professional workstation cards like the AMD FirePro™ W-series, AMD technology works transparently with Adobe Premiere Pro to provide scalable GPU-accelerated editing solutions for inspired prosumers and creative professionals everywhere. The software is accelerated by OpenCL to efficiently harness the compute power of AMD APU and graphics products and achieve up to 4.3X faster exports from a source format with effects to a preferred final destination format for quick and easy distribution and publishing1.
“We’re all about creating the best software possible, and at NAB we’re revealing some incredible enhancements to our video editing tools,” said Simon Williams, director of strategic relations at Adobe. “Our customers require powerful systems that enable them to work quickly and efficiently. While we already support OpenCL on the Mac, today’s announcement gives creative professionals the opportunity to tap into the massive compute resources of AMD APUs and GPUs on Windows-based PCs, broadening the type of accelerated experience they can have with our upcoming software.”
Video professionals and enthusiasts utilizing the Adobe Creative Cloud gain a competitive advantage through immediate access to AMD hardware-accelerated features and functionality with the latest Adobe video production software. Adobe Creative Cloud offers an end-to-end, cross-platform tool kit with industry-leading software seamlessly integrated with all the hardware needed to create, collaborate and stay connected.
At NAB, Adobe is previewing the next generation of its professional video and audio products (NAB Booth SL3910.) Learn more about the next versions of Adobe’s pro video and audio tools at: www.adobe.com/go/nab_reveal. More information about Adobe's upcoming new video tools will be unveiled at Adobe MAX, The Creativity Conference, May 4-8 in Los Angeles, Calif.
Supporting Resources
With Adobe Creative Cloud a simple monthly membership gives you the complete collection of Adobe creative desktop applications. Along with cloud storage, Creative Cloud members automatically get access to new tools and product updates as soon as they’re released.
For more information about AMD and Adobe at NAB Show
For more information about AMD Performance
For more information about AMD and the new version of Adobe Premiere Pro
Details about AMD and Adobe
For more information about AMD FirePro™ Graphics
For more information about Adobe
For more information about AMD
About AMD
AMD (NYSE: AMD) is a semiconductor design innovator leading the next era of vivid digital experiences with its groundbreaking AMD Accelerated Processing Units (APUs) that power a wide range of computing devices. AMD's server computing products are focused on driving industry-leading Cloud computing and virtualization environments. AMD's superior graphics technologies are found in a variety of solutions ranging from game consoles, PCs to supercomputers. For more information, visit http://www.amd.com.
AMD, the AMD Arrow logo, FirePro and Radeon are trademarks of Advanced Micro Devices, Inc. Other names are for informational purposes only and may be trademarks of their respective owners.
Testing was performed by AMD, test project used the “Three-way Color Corrector” effect with the NAB 2013 “sneak peek” build of Premiere Pro Next provided by Adobe, .MP4 video file, 17 seconds, 1920x1080, 24fps with .WAV audio file, 169 seconds, 1411 kb/s audio bitrate, 41 khz audio sample rate, export to Device – Apple TV, iPad, iPhone 4 and newer, 720p, 29.97 max render quality. With OpenCL (GPU acceleration) enabled, the export took 46.6 seconds. With CPU only, the export took 246.1 seconds. Test system was a desktop PC configured with an AMD A10-6800K APU with AMD Radeon™ HD 8670D Graphics, 8GB DDR3-2133 running Window 8 Professional (x64) build 9200, video driver 12.102.0.0. RID-10

CS7... or CS6.5?
I don't have any links, but I remember a past discussion where the Adobe CEO said they would be going to an annual release cycle... with a .5 (paid) upgrade between the major version upgrades
If that is still true, that means that what will come out this year will be CS6.5

Premiere Pro CS6 wont start

ive tried asking for help here: http://forums.adobe.com/message/4935365#4935365
but no luck so far. livechat were no help, and tech support phone in Australia, didnt answer the phone then the line dropped.
Premiere Pro installed via the download manager (creative cloud), when it launches the splash comes up and runs through the list of files, then the window opens for a split second, and immediately quits. No error messages.
Any ideas, and how can I get through to a tech support person, do Adobe even offer this?
Please help, Im getting desperate now, its been all day and I'm back at work tomorrow. how can I get an answer?
thanks
A

More computer information might help http://forums.adobe.com/message/4200840

Premiere Pro, Creative Cloud & Adobe Application Manager all wont open.

One day it was fine, the next it's not. My Premiere Pro, Creative Cloud & Adobe Application Manager all wont open.
No error messages, it just doesn't open. I can't get through to talk to staff (because why should you be able to right? You only pay for the service..)
Could someone please shed some light on my situation?
My Lightroom and Photoshop are running fine as normal. I wish I could provide more information but it's really that simple - none of it will open.
Thank you!

At this point, I think I'd just download & run the Adobe CC Cleaner app, and use it to uninstall & clean up your PrPro & the Creative Cloud desktop app itself ... then download a fresh copy of the CC desktop app, install & sign into your account, then download & reinstall PrPro ...
Neil

Das neue Premiere Pro crashed beim laden des Projekts von der vorigen Version

wie der Titel sagt....
why? soll ich jetzt angst haben den cloudupdater zu verwenden weil dann alles instable wird? why? warum hat vor dem letzten update alles funktioniert und jetzt stürzt premiere pro beim laden des projekts ab. was soll ich nun denken? ist das genauso scheiße softwarephilosophie wie von unterweltklitschen? was ist da los? könnt ihr mir bitte helfen?
ps; bis vor dem letzten cloudupdate hat alles funktioniert. jetzt crasht es!
pps; wie argwöhnisch kann man werden wenn man mietsoftware anbietet. dass die software überhaupt crashed ist schon ein armutszeugnis für adobe.
ppps: soll ich lieber die updates bleiben lassen? wenns mal stable läuft blos nicht mehr den adobe cloud updater laufen lassen? argh! +
pppps: wie kann ich trotz cloud auf eine ältere version downgraden? (cih würde gerne das letzte cloudupdate rückgängig machen, weil obviously verursacht das probleme bei mir)
ppppps: Vielen Dank fÃ¼r Ihr Feedback. Danke Adobe für dieses schöne stylische Element.

Habe leider die gleichen leidvollen Erfahrungen gemacht, allerdings auf einem komplett neuen Rechner mit Aususboard. Dualcore CPU und alles was neu ist und Geld kostet.
Ich findes es sehr bedauerlich, dass Matrox so viele Leute werkeln lässt nur um festzustellen, dass es nicht geht. Soviel Negativmarketing sollte man sich als renomierter Hersteller nicht leisten.
Ein laufendes System kann nicht durch ein noch so tolles (auf dem Papier) neues nicht funktionierendes System ersetzt werden. Leider falle ich immer wieder darauf rein, andere wohl auch.
In der Summe der verbrauchten Zeit ist das laufende System sicher besser.
Wir Anwender sind da viel zu nachsichtig mit den Herstellern.
Schade ist auch, dass Matrox keine Informationen gibt, wann denn 6153 durch ein wirklich funtionierendes Build ersetzt wird.
Gruß
Ulrich Muzyk

Premiere Pro

Similar Messages

Maybe you are looking for