Premiere update to 5.0.2 and non 5.0.3

HI
next week i'll upgrade to cs5 i've premiere cs5 but i'm waiting to receive nvidia card 470 before to upgrade from cs4 to cs5
i'm also using matroxn rtx2 hd, so that's my  problem
matrox say to upadate to premiere 5.0.2 and non to 5.0.3  because  they have not tested again matrox rtx2 (with their drive 5.0) with the new premiere 5.0.3
so i would like to know if it's possibile to upgrade premiere to 5.0.2 and not to 5.0.3,
Can i choose the relase i want to upgrade ?  or when i stard to upgrade premier automatically it's going to 5.0.3 ?
whati i have to do?
thanks
radiotest

Yes you can upgrade to 5.02, just go the the upgrade site.
Also, check out: http://forum.matrox.com/rtx2/viewtopic.php?t=9003
I upgraded to 5.03 and it seems to work, but you may have to reload the Matrox drivers after the PrPro 5.03 updgrade.

Similar Messages

  • Since the FF8 update, all bookmarks were lost and none of the recommended methods for restoring lost bookmarks work; I always get "Unable to process to backup file" even though the backup .json files still exist

    Since a FF8 update, all bookmarks were lost and none of the recommended restore methods work, even though I have been able to find the backup ".json" files; I continually get "Unable to process the backup file" for all methods of importing or restoring the bookmarks from the .json files. As others note, I can also no longer add any new bookmarks to my now empty bookmarks tab. My profile has not changed, so that's not the problem. This is really a pain.

    Did you try to delete the file places.sqlite to make Firefox rebuild the places.sqlite database file from a JSON backup?
    *http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox
    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file

  • Updated to 10.8.2 and now none of the MS Office 2011 are working

    Recently, I updated to 10.8.2 and now, none of my Microsoft Office products are launching (2008 or 2011). Any ideas what how this upgrade could have so adversely affect Office and what can be done to correct it?

    We had to completely uninstall MS Office and all associated files. Then we reloaded the app. After a few reboots it worked fine. When I got on the computer today and received the Mt Lion update I was dead in the water again. I'm really not looking forward to going through the entire exercise again not knowing if the next time Apple sends out an update the same will happen.

  • My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application"

    My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application" and "<app> could not be downloaded at this time - Done or Retry".
    It's not an iTunes login / password issue because sometimes one or two of the Apps will download and the others stall with the blank progress bar. The internet connection is working fine in all other respects.
    Sometimes, many restarts later the downloads will complete. Is this a known bug? Is Apple working on it? Any fixes?

    My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application" and "<app> could not be downloaded at this time - Done or Retry".
    It's not an iTunes login / password issue because sometimes one or two of the Apps will download and the others stall with the blank progress bar. The internet connection is working fine in all other respects.
    Sometimes, many restarts later the downloads will complete. Is this a known bug? Is Apple working on it? Any fixes?

  • I have logged in to my itunes account on a different computer and none of my purchased music is showing up. I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where  I sync everythi

    I have logged in to my itunes account on a different computer and none of my purchased music is showing up. I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where  I sync everything. I have authorized this new computer so I don't know what the problem is. I can't get on my old computer with my itunes account because the computer is broken. Not sure what to do

    "I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
    Correct.  it does not magially appear in other places.  It will only be where you put it.
    "I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where  I sync everything. "
    Correct as well.  Iphone will sync with one computer at a time.  Syncing to another will erase the current content.
    You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

  • Update Excise base value in MRP based and Non-MRP based billing

    Hi Gurus,
    We need to update Excise Base Value for Statistical Condition type. How to configure the same ?
    Sl.No  Pricing Condition Type      Active   Statistical           Passed to Accounting        
    1        MRP Price (Statistical)                                                                               
    2        Abatement (Statistical)                                                                               
    3       Surcharge  (Active&Passed to Accounting)
    4      Assessabel value (Statistical)
    (No:4 This is the base for calculating Excise duties i.e Excise Base Value)
    5       List Price (Statistical)                                              
    6       Customer Discount(Statistical)                             
    7      Surcharge(Active&Passed to Accounting)                                                                 
    8      Net Price (Active&Passed to Accounting)                                                                     
    9      BED   (Active&Passed to Accounting)                                                                          
    10    ECess  (Active&Passed to Accounting)                                                                       
    11   SECess  (Active&Passed to Accounting)
    12   Total collected from Customer(Statistical)              
    Issue: When there is MRP Price higher than the List Price, then the Cutomer will be charged on the basis of Net Price only, but the duties amount to be paid to the government on MRP Price. so in this case I can not calculate Excise Duties on the Actual Net Price condition which is active and passed on to accounting. And always the Excise duties to be calculated on Assessable value(no:4). But that condition type if I make activate then it will pass to accounting and also getting added to the Net Value(KOMP-NETWR). How to come out of this situation.(as per the customer requirement both MRP based materials and non-MRP based materials are also considered in the same sale order i.e with the same pricing procedure).
    Becasue of this EXBAS is not getting updated in the J_1IEXCDTL.
    Gurus, Share your valuable experiences and suggestions.
    Thanks &Regards
    Sreekanth
    09611147585

    Dear Lakshmipathi,
    As per your suggestion, I have maintained Material Assessable Value and then also the duty values are calculating on the basis of Assessable value maintained in the Pricing Procedure. It is not taking the Material Assessable Value into consideration. And it is not getting updated the Excise Base Value.
    In which case Material Assessable value will be taken into consideration?
    How to update the Excise Base Value in J_1IEXCDTL tables?
    Thanks&Regards
    Sreekanth

  • Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

    I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message :  "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
    I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
    PLEASE HELP!

    Hi Delarey,
    Please go to the following location and rename the folder to old_folder name
    User/user  library/Application Support and rename Adobe folder
    User/user library/Preferences and rename the Adobe folder
    Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
    Make sure that you are in user library if you are not sure check the link below.
    Access hidden user library files | Mac OS 10.7 and later
    Regards,
    Vinay

  • Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.

    I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"  when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
    Anyone?
    Thanks

    Hi Stan.
    I had the same problem as you did though I am using Adobe CC.  I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version. 
    Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup )  first and updated my NVidea card to no avail.  Eventually what did the trick was this...
    After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it.  Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again.  I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care.  That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
    So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
    Let me know if this works.
    Cheers and good luck

  • Premiere Pro CC only using 30% CPU and none of the GPU

    Hi,
    I’m very new to video editing (actually I have no Idea what H264, or avi or mp4 or mov is, I just need the video to work) and I have never used Premiere Pro before. Now I'm trying the CC 7.0 trial.
    My goal is to achieve the fastest rendering times possible.
    Today I have upgraded my PC for maximal performance in video editing:
    Intel i7 4930K (12threads)
    Radeon 6950 (2GB)
    16GB RAM
    SSD
    I have a recorded video of me playing a PC game in .avi 2552*1348 resolution (2560*1440 monitor without some borders).
    I have set export to H.264 and settings to match source (resolution 2552*1348, 30 FPS, Progressive, Square pixels, NTSC, main, 5.0).
    But when rendering (no effects, just cutting) the program only uses 22-45% of the entire CPU and none of the GPU.
    The best result with this stress was cca 1:1 rendering:movie length. I'm using 16GB RAM, I tried 32GB and 64GB and the stress on CPU and GPU was the same and the rendering times changed only slightly.
    I have an SSD and the read write speeds during rendering are 1-9 MB/s so there is plenty of performance left.
    Frankly, this 1:1 performance offers Power Director 11 which I have been using so far. (When editing 1080p the ratio in PP is cca 1:2,5, the same as in Power Director.)
    So when the disks are idle, the GPU is idle, more RAM changes nothing and the CPU only works on 1/3 its capacity, what is the bottleneck?
    I want to use 100% of the CPU and 100% of the GPU and have the rendering:movie say 0,3:1 or so.
    What can I change to fully use the processing power of my computer?
    Thanks

    Start reading here: Tweakers Page

  • I just updated my MAC operating system and when I went to open a recent document in numbers, the document that opened had none of my data and was formatted differently.  Can I get my document with all my information back?

    I just updated my MAC operating system and when I went to open a recent document in numbers, the document that opened had none of my data and was formatted differently.  Can I get my document with all my information back?

    I suggest the easy stuff first:
    1) quite Numbers and restart Numbers
    2) reboot the computer
    After that try opening the same document in another user space

  • ARE-1 and Non ARE-1 updation

    Hi,
    In MM cycle where we can update the materials in ARE-1 and Non ARE-1 register. Is this available in SAP.

    Hi,
    Check these SAP notes
    - Note 1270637 - Change in heading and alignment corrections for ARE1 form
    - Note 1014967 - ECS and other duties in ARE1, ARE3 transactions and reports
    - Note 1034008 - Budget
    - Note 1171753 - Excise base zero when excise invoice created in background
    - Note 1035545 - Excise base amount is not updated in table J_1IEXCDTL
    SAM

  • NI Update Service and non-administrative user

    On my Windows 7 PC I have 2 different users:
    a local Administrator user who can install application but can't navigate to the web (for security reasons)
    an User who can't install anything but can navigate to the web
    I launch NI Update Service under User account and it shows a list of available updates.
    I select one or more of these updates and I click on "Install" button
    Is asks me for the Administrator password, but then it gives a communication error with NI...
    Does it use Administrator user to download the updates?
    It should use it only to install and not to download
    Vix
    In claris non fit interpretatio
    Using LV 2013 SP1 on Win 7 64bit
    Using LV 8.2.1 on WinXP SP3
    Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
    Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

    Yes, I tried but if I select "Run as administrator" Windows asks me for credential of an administrator account.
    I enter username and password, but my administrator account can't communicate to the web and so I get the error in the attached image (comm_err.jpg).
    As I wrote, I think that the problem is that NI Update Service uses the administrator user not only to install the programs but also to download them from the NI servers.
    I don't think this is OK because as shown in the attached install.jpg the button with the administrator shield is "Install", but after I click on it and enter the administrator credentials, NI Update Service tries to download the selected programs.
    But with my administrator user this is not allowed.
    It should download them with the user that launched it (with this user it is able to find the list of available updates) and use the administrator user only to install.
    Could someone from NI confirm that this is the behavior of NI Update Service, please?
    Vix
    In claris non fit interpretatio
    Using LV 2013 SP1 on Win 7 64bit
    Using LV 8.2.1 on WinXP SP3
    Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
    Using CVI 6.0 on Win2k, WinXP and WinXP Embedded
    Attachments:
    comm_err.JPG ‏27 KB
    install.JPG ‏63 KB

  • Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."

    Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."

    Which latest update? Details get answers. Rather than using SU, DL and install from http://support.apple.com/downloads/.

  • I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectal

    I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!

    Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot.  After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.

  • Just updated to ios 4.3.2 and none of my IPhone 3Gs apps will run. The original apps that came with the phone do work though.  What do I have to do to get them working again?

    Just updated to IOs 4.3.2 and none of my IPhone apps will run.  The apps which came with the original phone do work though.  What can I do to fix this problem?
    Thanks,
    Brian

    Helfpul answers here:
    https://discussions.apple.com/message/13386937#13386937
    A restart sometimes works

Maybe you are looking for