PreOrder & Network switch

So my dad and i are currently on an expired family plan on t-mobile and were ready to switch networks so i plan to preorder an iPhone 4. I do have a few questions im not clear about...
1. how do i go about keeping my number and contacts?
2. how do we set up a new account on at&t so that my dad and i are on the same contract? he does not plan on getting a new phone.

1. how do i go about keeping my number and contacts?
When placing the pre-order, you will select as a new AT&T subscriber with an option to have a new phone number assigned, or as porting a number from another carrier. If the latter, you will enter the phone number with area code.
If you are storing contacts on the SIM card, which is limited to a name and a couple of phone numbers and maybe an email address for each contact, the iPhone includes an option to import contacts from a SIM card that was used with another phone. The iPhone does not support storing contacts on the SIM card. The iPhone is designed to be synced with a supported address book application on your computer for contacts via the iTunes sync process. With Vista, this can be with Outlook 2003 or 2007 along with syncing calendar events and notes, or with the address book application used by Windows Mail called Windows Contacts or Windows Address Book.
2. how do we set up a new account on at&t so that my dad and i are on the same contract? he does not plan on getting a new phone.
If he does not plan on getting an iPhone, I recommend placing an iPhone pre-order at a local AT&T corporate store on the 15th. Your Dad will not be able to switch to AT&T until your iPhone is activated which will also port your number from T-Mobile and notify T-Mobile you are canceling your service at the same time. When your pre-order arrives at the AT&T store, you and your Dad can go together to port his number to AT&T at the same time your number is ported to your iPhone and your iPhone is activated with AT&T.

Similar Messages

Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

Hello - I recently got Comcast Xfinity service. We had switched from a different service. Our wifi service was never great, but prior to Xfinity, it worked decently. But now that we have Xfinity, our wifi is much worse and very unreliable. I am seeking advice on how to setup my various Apple wifi devices in my home. I have attached a diagram that illustrates what I am dealing with. We have a large old house with stone walls. Comcast does not support this issue.
To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor. The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch. I already have ethernet cables running from the network switch in the basement to various locations throughout the house. So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices. The dark lines running from the network switch to the various devices represents ethernet cable.
The immediate problem that we are having is that we are unable to connect to our wifi networks. The networks show on my mac laptop and my iPhone, for example, but I am unable to connect. I know that I am inputting the correct password, but most of the time, we cannot get in. Sometimes we can..... Very frustrating! Also, due to the fact that I setup what I have over several years, I have multiple network names. I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
Here is what I am looking to accomplish:
1. Seamless wifi access throughout our house.
2. One name for our wifi network. Right now we have multiple names for multiple networks. Just want to simplify and have only one network. (I guess that an additional "guest network" would be ok, but not absolutely necessary.
Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this. Just tell me how to do so.
I have no idea how where to start or how to set this up. I imagine that I would need to disconnect everything and reset and start from scratch? Can someone tell me what I should do? Even general advice would be helpful, but the more specific, the better, given my limited understanding. Any help or advice would be greatly appreciated.
Thanks in advance!

Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can I use the Time Capsule as a backup drive and wired network switch? I do not want to use the wireless part as I already have an ADSL 2 Wireless Router for that. Thanks.

Hi
I just went from PC to MAC. Have a MAC Mini and wanted to get a time capsule for backups. I would like to use it as a wired device instead of wireless. Would me connecting it to my router do the trick? Can I then use the LAN ports in the back of the capsule like I would a network switch? Can I just disable the wireless router part of the capsule as I already have an ADSL2+ Wireless Router.
Thanks

I wanted to run a cable upstairs from the switch downstairs so the Time capsule becomes my upstairs switch (as I only have Wireless upstairs at the moment. That will work right?
Cheers.
Yes, that is also fine.. ethernet being the cable you run.. !!
You still don't have to use a TC.. which is still a rather expensive box for the job.. an Airport Extreme would offer the same exactly minus hard disk for cheaper price and more than likely better lifespan.. TC with internal power supply run too hot.

Home setup - network switch and 2 Time Capsules

I have an ADSL modem/router (Billion BIPAC 5200G). I have used it previously with wireless turned off. I then used a time capsule in bridge mode so that NAT etc is turned off, and then use it to broadcast wifi and as a backup. It is attached to the modern with ethernet. It worked fine.
I am now in a house with a lot of ethernet ports, linked to a massive hub thing. But it needs a switch to link it all together.
So I am thinking of this setup:
PHONE LINE
to
BILLION ROUTER (Set as a router with wifi turned off)
to
NETWORK SWITCH
to
VARIOUS ethernet enabled devices in different rooms (i.e. printers, Apple TV, TV, Time capsule)
Then I want to use my 2nd time capsule to extend my ground floor network by plugging it in essentially directly into the time capsule via ethernet in roaming mode.
Is this the optimal setup for this? My other idea was to forgo the network switch and do it this way:
PHONE LINE
to
BILLION ROUTER (Set as a router with wifi turned off)
to
VARIOUS ethernet enabled devices INCLUDING the TIME CAPSULE and PRINTER.
then:
To the TIME CAPSULE:
to
VARIOUS ethernet enabled devices INCLUDING Imac, Apple TV and another TIME CAPSULE in roaming mode.
My main questions are: which setup will give me better speeds to all devices. Ie: is the switch even necessary? In my 2nd example, will the first time capsule and printer be available to the Imac.
There seems to be no real advantage to having the TIME CAPSULE in router mode while keeping the BILLION ROUTER as a pass through with NAT off (To avoid Double NAT) except for the guest network capabilities.
If its just simpler to have the network switch, then perhaps that's the way to go. If so: any suggestions on network switches that work well?

It doesn't allow me to select ethernet as an option for internet connection, only dchp, ppoe and one more which isn't ethernet.
DHCP is correct setting. .it will use ethernet but the new AC TC has problems.. it needs a crossover cable with some switches. Or you need to return it and get it replaced as there is something wrong with its wan port.. the new AC model needs a hardware revision and about 3 or 4 firmware upgrades before it hits the status of the Gen4 it replaced.
My questions are: should I connect my time capsules together directly with ethernet using another available port in my new time capsule. I thought my switch would work better. Also, does one time capsule have to be in router mode instead of having both of them in bridge.
Both should be in bridge.. but you can rearrange things to see if any of the other devices works better.
You can use the billion or the old TC.. plug the new TC into those.
Bob is correct though.. the switch is the correct thing for everything to be plugged into .. but in home situation what works is more important than what is best. It if fails in all of them then the WAN port is proven faulty.
Should I be able to use the hdd on the 2nd (older) time machine as essentially a networked hdd for putting movies and music on, and use my new time capsule as the sole backup (occurring both over ethernet for my iMac and wifi for our laptops)
Yes, that is ok.. you just need to get the AC version TC actually working properly.
Give us a few screenshots of things.. that really helps to see.
Click on each unit and show the summary pages.

Hyper-V can't create a network switch in Windows 8 enterprise evaluation

Hello
I have a problem with creating a new virtual network switch in windows 8.
it's the error:
[Window Title]
Virtual Switch Manager for HYPER-VISOR
[Main Instruction]
Error applying Virtual Switch Properties changes
[Content]
Failed while creating virtual Ethernet switch.
[Close]

Hi,
If you are using Wireless network adapters.
Virtual switches can only be created that are bound to wired NIC's
Best regards,

Using network shared variables in two computers connected via a network switch

let me start by saying im a rookie to the programming environment but i have used Labview a couple of times to understand the basics, i have a computer and a laptop (both using vista), both of them with Labview Full development System (Student ed. with Mathscript) installed, so what im tryin to do is to use the built in microphone located in the laptop to aquire sound and then use a Shared Variable to transfere the sound signal from the laptop to the computer, the laptop and the computer are connected to a network via a network switch and ethernet cables, so far i nothing worked, i can manage to create the shared variable in the laptop and use it there but it doesnt appear in the computer, im not sure whats the problem i have even disabled firewalls in both systems, help from anyone wil be appreciated.....

Hi Lukie,
This KB should be of some assistance to you.
Trouble shooting network published shared variables
Also the following link gives some instructions on the use of shared variables.
http://zone.ni.com/reference/en-XX/help/371361B-01/lvhowto/bind_to_source/
I hope this is of some assistance, let me know if you have any more problems.
All the best,
Message Edited by mickeyw on 08-05-2008 12:29 PM
Mike W
Applications Engineer
National Instruments UK&Ireland

Failover did not happen when network switch went down!!! PLEASE HELP

Hi gurus,
Yesterday one disaster struck my RAC database. We have two node cluster and it is 10.2.0.2, both of them located in different sites, yesterday suddenly power went down and the one of the network switch went down and got destructed, node one of RAC database was connected to that switch, but the failover did not happen to the node two as this should be the case when one node goes down the other should be available for all the node one sessions/connections.
when I tried to ping/telnet the node 1, it was not happening because the switch was down, the network guyz connected the cables to other switch available. When I connected to the node 1, it was showing "Oracle is not available" message.
And when I tried the other node, it was the same case but I did not see any error in alert log file. Then my TL restarted both the nodes and then the database was available.
I am very confused that how the failover did not happen and how the database went down, PLEASE suggest something to how to identifiy what was happened. Thanks & Regards
Edited by: user1221 on Mar 18, 2009 1:09 AM

About Oracle RAC ... you have 2 nodes ... You have to connect 4 IPs.
I mean
- IP public node1
- IP public node2
- IP Virtual node1
- IP Virtual node2
When node1 down
You can not ping "IP public node1", but you should ping "- IP Virtual node1", because it should up on node2.
But not bind 1521 port.
Idea about failover
you have to create new difference Service...on RAC Database!
and on your client have to set TNS to on failover and balance (if you used OCI), you can use TAF feature
Example:
DB =
(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = db01-vip)(PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = db02-vip)(PORT = 1521)) (FAILOVER=ON)(LOAD_BALANCE = yes) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = NEW_SERVICE_DB) (FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))
If you use JDBC, can not use TAF.
Anyway, I suggest you read more about RAC on http://otn.oracle.com/rac and http://oracleracsig.org
Good Luck

Adding network switch to external WAN to increase number of ports available

This may be a stupid question but this has kinda been landed on me so I'll ask anyway.
We have a Cisco router with ethernet connection to our provider's NTE. They provide us with one ethernet port on the NTE which we connect to the WAN port on our Cisco router. The WAN interface on our router is configured with a public IP address from the /29 subnet the provider assigned to us.
We have a 3rd party installing SIP connectivity for us and they need us to provide them with a public IP address and connectivity outside our router/firewall for their Session Border Controller (apparently NAT doesn't work well with SIP so we can't have it inside our network and NAT it via our existing router)
Since we only have one ethernet port presented to us by our provider, is this just a case of placing a network switch in between the router and the provider NTE then having our router connect to the switch and the 3rd party's Session Border Controller connect into the switch too? We can then assign another IP address from our provider's /29 to the 3rd party's kit.
Is it as simple as that or am I missing something?
If it really is that simple, are there any considerations for what sort of switch I should use? Can it be something relatively cheap and cheerful, does it even need to be a managed switch?

Is it as simple as that or am I missing something?
Should be that simple although I would check with provider ie. a switch will usually send L2 protocols on the link to the provider as well as to the router so you may want to check with them they are happy for you to do it.
Although I suspect they won't care as they don't really know how you have it connected now ie. you could already be using a switch as far as they know.
Still worth running it by them though.
You only need a L2 switch so definitely no need for L3 functionality.
Some people prefer unmanaged switches outside of their network eg. in the untrusted area.
Really up to you whether you need it managed or not.
In terms of overall functionality very little is needed but you would want something reliable as it is another single point of failure.
One last thing, if this is the only connection then nothing else to do but be aware that currently if the provider NTE fails your router knows about it because it is a direct connection. With a switch in between if either side fails the other side doesn't know because it's connection to the switch is still up.
If this is your only connection to the internet then it's not an issue but if you had an alternate path you would need to track the connection to make sure you failed over properly.
Jon

Attaching Network switch to Airport Express

Hi,
I have set up my network using a Linksys router and connected my Airport express using WDS............ It works. I am wondering if it would be possible to connect a Network switch To the ethernet port of the airport express so that I can connect multiple peripherals namely a NAS and another computer.
thanks

Hello natsan. Welcome to the Apple Discussions!
If you have a working WDS between your Linksys router and the AirPort Express Base Station (AX), the AX's Ethernet port should now be enabled ... and you should be able to connect an Ethernet switch to it.

When I create an external Virtual Network Switch on Gigabit Ethernet, Windows 8.1 will always crash in a few minutes.

The text in the blue crash screen is "Unexpected Keernel Mode Trap".
But it doesn't crash when I create the external Virtual Network Switch on 802.11n.
Why? How to fix this?

Hi,
Sorry for my late reply.
For the issue, please upload the dump files so that we can help you analyze them.
Automatic Memory Dump Settings on Windows 8:
http://www.thewindowsclub.com/automatic-memory-dump-settings-windows-8
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Meanwhile, I think it may be caused by netio.sys file.
I suggest you try to install different the driver version to test it.
Regards,
Kelvin hsu
TechNet Community Support

Not able to fetch some network switches data in LMS 4.0

Hi Experts,
we have LMS 4.0 and we found one problem that some network switches data are not able to fetch with LMS.
what could be the reason to happen this type of problem?
please assist with best solution to resolve this issue..
Suhas B.

Hi,
I am facing below problem
Config Archival Status
No. of Devices
Successful
48
Failed
1
Partially Successful
0
Total
1345
Configuration Never Collected
1338
So I look up a device in the Device Center, here is its Reachability Status:
SNMPv1 Read
Success
SNMPv2c Read
Success
SNMPv1 Write
Failed
SNMPv2c Write
Failed

Problems with uVerse DVR connected to a network switch and 1x3 HDMI switch

So that I can connect multiple devices (Apple TV & BluRay player), I've connected my uVerse DVR to a network switch with IP Quality of Service function. Is it known whether or not this will cause problems? I am having problems, but see next question for probable cause. I have also connected my HD TV to a 1x3 HDMI switch output, with inputs from the uVerse DVR, Apple TV, & BluRay player. This clearly has caused problems because the DVR goes through the power on sequence almost everytime the TV is turned on, I have intermittent problems with the HDMI switch displaying video on the TV, and on several occassions, shows scheduled for recording haven't recorded at all or only partially recorded.

I've been having problems with this for months especially with the GigaPower rollout and broke down and decided to resort to some network engineering tactics versus calling out AT&T Techs. The Techs are good at their job but they are only knowledgeable about the hardware aspect but are dumb founded on this one and it's not their job to know. To the point of using a switch next to the DVR and this counts truly for all set top boxes via Ethernet they need to be physically seperated wires. Well, unless you want to pay someone to put an extra Ethernet drop next to each wired set-top box or DVR this isn't feasible so options are deal with it or spend $20 more dollars on a switch that supports 802.1q trunking which makes two 'virtual' independent ethernet cables over one line. If you can do it great otherwise this takes a higher than average knowledge of basic networking. A basic setup would be: + Get two switches - Netgear GS108T or GS108E I've found does the job well. + Enable 802.1q advanced VLANs+ Make two additional vlans 2 and 3 (1 is the native VLAN)+ Mark a port as tagged 'T' for the trunk port to the other switch for VLANS 1,2,3 (I used port 8)+ Assign VLAN 2 and mark as untagged for ports 2-7 - this is for data traffic+ Assign VLAN 3 and mark as untagged for port 8 only - this is for video multi-cast traffic+ ***DISABLE*** MULTI-CAST IGMP SNOPING otherwise IPTV won't work. On the back of the Uvserse router, take an Ethernet wire and plug into port 8 and take an Ethernet cable and plug into port 7. This does not create a loop though sounds like it, we've created two unique layer 2 networks. Now configure the second Netgear switch (or switch of your choosing...) the same exact way but plug your DVR into port '8' and all your data stuff XBox, whatever... into ports 2-7. Whalla, you've eliminating multi-cast flooding and DVR traffic is independent. Ever since I started doing this I increased the speed throughput from 10 MB/s or to never working to a full reliable gigabit speed or respectibly whatever UVerse service you get.

Cisco 4506 network switch

i need details of cisco 4506 network switch with supervisor module

Hi,
You can visit
http://cisco.com/en/US/products/hw/switches/ps4324/prod_brochure_list.html
a Good link on 4500 supervisor engines.
Regards
Dinesh
http://Knowurtech.com
(Good technical articles. Submit your articles and get featured on our website. Send email to [email protected] To know the benefits http://www.knowurtech.com/be_an_expert.html)
Hi,
You can visit
http://cisco.com/en/US/products/hw/switches/ps4324/prod_brochure_list.html
a Good link on 4500 supervisor engines.
Regards
Dinesh
http://Knowurtech.com
(Good technical articles. Submit your articles and get featured on our website. Send email to [email protected] To know the benefits http://www.knowurtech.com/be_an_expert.html)

Hyper-v cannot add any network switches

I just upgraded from from Win 7 to Win 8 enterprise and have installed hyper-v. I am now unable to add
any network switches (external, internal or private). I have uninstalled hyper-v and my nics multiple times. I have also tried to adding a switch using the powershell command New-VMSwitch.
All the errors come down to a file not found error but here is the one from powershell:
New-VMSwitch : Failed while creating virtual Ethernet switch.
Switch create failed, name = '21B8292F-A4FD-4FFF-93A9-76602E2DE9EE', friendly name = '': The system cannot
find the file specified. (0x80070002).
The operation failed because the file was not found.
At line:1 char:1
+ New-VMSwitch "Wireless NIC" –NetAdapterName "Wi-Fi" –MinimumBandwidthMode Weight
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VMSwitch], Virtualizati
onOperationFailedException
+ FullyQualifiedErrorId : ObjectNotFound,Microsoft.HyperV.PowerShell.Commands.NewVMSwitchCommand
Any thoughts would be appreciated.
-James
MCPD: SharePoint Developer 2010
Posting is provided "AS IS" with no warranties, and confers no rights.
Please mark as answer or helpful as appropriate

Hi,
Please uninstall the NIC/WiFi device from Device manager, then scanned for device and reinstall the device for a test.
Niki Han
TechNet Community Support

VRealize Operations Management Packs for Lenovo Compute and Lenovo Network Switches

Lenovo Systems Management Community Members:
Blue Medora is currently developing a two new and distinct VMware vRealize Operations Management Packs aimed at Lenovo datacenter technology -- a vROps MP for Lenovo Compute as well as a vROps MP for Lenovo Network Switches. Our target is to release both vROps MPs in the September timeframe. Both of the MPs will support vROps v6+. If vROps integration with Lenovo Compute and/or Lenovo Network Switches is something that is relevant to you, our product management team is very interested in talking to you about what aspects of the Lenovo-based compute and network infrastructure you like to see surfaced in vROps, models of Lenovo servers and network switches your your organization most commonly leverages, as well as any specific troubleshooting / diagnostic use cases you have around Lenovo compute and network.
Please drop us a line at [email protected] if you'd like to participate in a pre-release program for the vROps MPs for Lenovo Compute and Lenovo Network Switches.

Sorry for being a bit slow in responding. Adapting the settings for my wired ethernet adapter as rdhw suggested solved the problem. (But since I am not using any wake-on features, I simply opted to turn them off instead.)
Interestingly, I had previously looked at these settings in the BIOS and turned them off there (forgot to mention this), but it appears the Device Manager settings were overriding the BIOS settings.
So, I still find Access Connections to be slow (it will take maybe half a minute or so to figure out what is happening when I switch between wireless and wired connections), and also getting the X200 to go to sleep takes more time than it used to do (it used to go to sleep momentarily when I, say, closed the lid, whereas now it will need to think for 10-15 seconds first), but at least everything works reasonably well now.
Which is nice, and I don't want to break anything that I don't have the time to fix, so I think I will leave it at this for the time being. Thanks so much for the help (and for the prompt reply)!

PreOrder & Network switch

Similar Messages

Maybe you are looking for