Prerequisites for Oracle 9i installation AIX 5L V5.3

Hi,
Can anybody give a clear idea on the prerequisites for Oracle 9i release 2 installation IBM AIX 5L V5.3
Thanks
Jibu

Where did you get that information from?
If you check the great cert matrix, you'll find that Oracle's support for 5L is rather wide. The general note/page says e.g.
"Oracle products are certified for AIX5L on all servers that IBM supports with AIX5L. ...
AIX5L certifications include AIX5L versions 5.2 and 5.3."
And 9.2 is certified on "5L" (but note that current support ends July this year)

Similar Messages

Where can I find Documentation for Oracle financial installation

Hi
Where can I find Documentation for Oracle financial
installation as which all modules to be downloaded for linuk server etc
here is what I have found
===================================
Oracle9i Application Server, Version 1.0.2.2.2 CD Pack for Linux x86 [Act as Server][to be installed on main linux server]
===================================
OracleÂ® Applications 11i Release 9 CD Pack for Linux x86 [Act as client][to be installed on client sean,AJ,Vinod]
===================================
Internet Developer Suite (1.0.2.4.1) CD Pack (with iAS Pack) for Microsoft Windows (32-bit)
===================================

user11872870 wrote:
Hi Tubby,
http://www.quest.com/documents/list.aspx?SearchOff=true&ContentTypeID=20&prod=1
This link has many pdf files but none has the useful information. Those pdf's are just 2 or 3 pages each.Sad Christmas for you then i suppose.
Perhaps you could contact the vendor (quest) and get them to help you in your search for whatever it is you're looking for. An Oracle SQL and PL/SQL forum is not the venue for this, please mark the question as answered, and good luck in your search.

SUNWsprox package with solaris 10 for Oracle 10g Installation....

Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed Tanvir

Hi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger

Prerequisites for SAP XI installation?

Hi,
Could any one help me out to know the prerequisite for SAP XI installation?
Thanks & Regards,
Yaseen Mahammad.

HI Yaseen,
The prerequisite for SAP XI installation are
1> You just require to have a WAS (WEB APPLICATION SERVER 6.40 ) installed with a ABAP stack as well as java stack.
2> You need to have a SLD installed.It can be on same or different system.
Its better if you follow the Master installable.
If you are installing XI 2004s it asks you for all the options in a sequence , for which all components you wish to install(eg. XI or MI etc) on your WAS.
Regards,
Yomesh

MORE DETAIL ABOUT MY problem (Configuration Steps for Oracle Forms installation)

OS:WINDOWS 2000 SERVER
DB:8I
FORMS:6I
I WANT TO TEST MY FROM TO RUN ON THE WEB ONLY TEST BY (RUN FROMS IN THE WEB)
BUT I CAN'T DO CONFIGRURATION STEPS (VIRTUAL PATH)
WHERE I CAN DO THIS CONFIGRATION
Configuration Steps for Oracle Forms installation of 06:05:38 2002/10/18
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory F:\devnt\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory F:\devnt\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory F:\devnt\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory F:\devnt\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory F:\devnt\JINIT.

Hi Guys,
Any help on this request will be very helpful.
Thanks,
Ashok Kumar.G

Prerequisites for oracle database firewall

Hello,
I am new to Oracle Database Firewall product & i know basic concepts of Oracle Database Firewall after
searching in google & want to know what are prerequisites for installing Oracle database firewall & which is
the latest version & which operating systems are supported ?
Thank-You
Rahul Shah

Hi Rahul,
I suppose you can get all information from oracle.com.
http://www.oracle.com/technetwork/products/database-firewall/downloads/database-firewall-349271.html
Thanks & regards,
Shuo.

Problems with exporting display for oracle apps installation

Platform : RedHat Enterprise Server 4
I'm trying to do a 2 tier installation of Oracle Applications.
As part of the install, I need to generate a display that can be used by the applmgr user, but bellongs to another user.
When running the following command line, I get an error message.
xauth -f .Xauthority extract - $DISPLAY | rsh -l applmgr localhost /usr/X11R6/bin/xauth merge -
connect to address 127.0.0.1: Connection refused
Trying krb4 rsh...
connect to address 127.0.0.1: Connection refused
trying normal rsh (/usr/bin/rsh)
localhost: Connection refused
Does anyne have an idea? I've done some troubleshooting, but I can't figure out what is wrong.
I have added the following in the xmgr and applmgr's profiles
DISPLAY=localhost:13
export DISPLAY
The vnc server runs on display 13

These are the scripts/files I'm using for installing Oracle Apps 11.5.10 on CentOS 4.2 (RedHat Clone) - hope it helps:
install.sh - adds necessary packages
yum install libaio
yum install openmotif
yum install gcc
yum install gcc-c++
mv /usr/bin/gcc /usr/bin/gcc344
mv /usr/bin/g++ /usr/bin/g++344
rpm -iUhv compat-gcc-7.3-2.96.126.i386.rpm
rpm -iUhv --nodeps compat-gcc-c++-7.3-2.96.126.i386.rpm
ln -sf /usr/bin/gcc296 /usr/bin/gcc
ln -sf /usr/bin/g++296 /usr/bin/g++
setup.env - Setup paths
# Oracle Setup Environment
ORACLE_SETUP_APPS=/setup/oracle/install/ebusiness/startCD
ORACLE_SETUP_PATCH=/data/setup/install/db
oracle.env - Installation environment
# Oracle Environment
ORACLE_BASE=/d01/oracle
ORACLE_HOME=$ORACLE_BASE/visdb/9.2.0
ORACLE_VAR=/var/opt/oracle
ORACLE_SID=VIS
ORACLE_TERM=xterm
# export TNS_ADMIN= Set if sqlnet.ora, tnsnames.ora, etc. are not in $ORACLE_HOME/network/admin
NLS_LANG=AMERICA_AMERICAN.UTF8
#ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
export ORACLE_BASE ORACLE_HOME ORACLE_SID ORACLE_TERM NLS_LANG ORA_NLS33
LD_ASSUME_KERNEL=2.4.19
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
export LD_ASSUME_KERNEL LD_LIBRARY_PATH
# Set shell search paths
export PATH=$PATH:/usr/sbin:/sbin:$ORACLE_HOME/bin
oracle - Kernel Parameters
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem    = 250 32000 100 128
fs.file-max   = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max     = 262144
net.core.wmem_default = 262144
net.core.wmem_max     = 262144
setup_oracle_1.sh - Installation Step 1 : Add oracle user
#!/bin/sh
PATH=$PATH:/usr/sbin
groupadd dba          # group of users to be granted with SYSDBA system privilege
groupadd oinstall     # group owner of Oracle files
useradd -m -c "Oracle software owner" -g oinstall -G dba oracle -s /bin/bash
passwd oracle
setup_oracle_2.sh - Installation Step 2 : Prepare installation directory
#!/bin/sh
. ./oracle.env
BASE_DIR=/`echo $ORACLE_BASE | cut -d'/' -f2`
mkdir -p $ORACLE_BASE
chown -R oracle:oinstall /$BASE_DIR
chmod -R 775 $BASE_DIR
mkdir -p $ORACLE_VAR
chown oracle:dba $ORACLE_VAR
chmod 755 $ORACLE_VAR
setup_oracle_3_apps.sh - Installation Step 3 : Start installer
#!/bin/sh
. ./oracle.env
. ./setup.env
sysctl -p ./oracle
su oracle -c "export DISPLAY=:0.0 && $ORACLE_SETUP_APPS/Disk1/rapidwiz/rapidwiz"There are some steps afterwards, but with this I'll usually end up with a complete installation.
C.

Repository for Oracle RDBMS installation ports (Oracle 12c)

Is there a repository for Oracle 12c where to find the configured ports after installation and above all after any change(s) in configuration?
I think about: listener, OEM, EPG,... ports.
Thanks and Regards.

OS Details: OEL 5.9 64 bit.
The portlist.ini is only interesting just after installation, and there not always an entry.
For instance, after I have done my installation (with listener, OEM), I still have an "empty file".
From the documentation:
"If you change a port number, it is not updated in the portlist.ini file, so you can only rely on this file immediately after installation"
"To find or change a port number, use the methods described in this appendix".
This is Appendix F. I scrolled it down, and don't find where to change and view the actual ports.
It seems to me there is no way to:
- See clearly the values of the ports used and for what component.
- Modify these ports and how.
Mayve I miss something, does someone understand it better?
Kind Regards.

Verifying the installable components for oracle rdbms installation

Hi,
Is there a way to check the installable components that appear during oracle rdbms installation like oracle spatial,etc. from a currently working database?
Is there a short way for doing this when doing installation of similar configuration and options on a different server?
regards

Hi,
You can get the information from "dba_registry" for current installed components
- Pavan Kumar N

Configure ASM for oracle Grid installation

Hi,
I do not know how to configure ASM for oracle grid infrastructure. As i tried to install oracle grid infrastructure says [INS - 30507] Empty ASM disk group.
I have to configure Asm before installing 11g R2. Please let me know what i have to do and provide the steps to configure and administer asm.
Thanks in advance.

http://docs.oracle.com/cd/E11882_01/install.112/e24660.pdf
ORACLE-BASE - Oracle Database 11g Release 2 RAC On Oracle Linux 5.8 Using VirtualBox

Xlc file Required for Oracle Product Installation on AIX 6.1

Hi All,
I am trying to install Oracle 11g Forms & Reports on AIX 6.1 [TL12].
I have installed JDK and Weblogic Server without any Errors.
When we reach 93% on software Alone installation with 11g Forms & Reports, we got some error
ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '///INS_PRECOMP.mk'We raised a SR for this Error, Oracle Support given one solution to follow.
>
Yes, there is a known issue with AIX OS.
Before starting the Oracle Fusion Middleware 11g Classic installation on IBM AIX, check for "xlc" availability on the system. It should be present either under /usr/bin/ or under >/usr/vac/bin directory.
If /usr/vac/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/vac/bin/xlc /usr/local/bin/xlc
If /usr/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/bin/xlc /usr/local/bin/xlc
Please clean up the failed install and start new install once you follow the above steps and let me know the results.But Unfortunately in our AIX 6.1 Box we dont have any 'XLC', in any of the folder in entire file system.
What is this XLC ?? if that is not available how to create the SYMLINK ?
Kindly Some one Advice me.
Regards,
Paja

Hi Paja,
I would recommend you o post this thread under application server/weblogic forum.
Arik

HELP for Oracle DBServer installation on SUSE 8.0

Hello!
I try to install 8.1.7 version on SUSE 8.0, but I get runtime error when I run runInstaller (something like segmentation failure). I think problem is in kernel parameters (SEM.. etc). I try to set them following in installation instruction but I don't know what goes wrong.
Please, could anybody tell me or send me scripts for this parameter setting or any instruction!
Thanks everybody!

I've had simular problems with installing oracle on suse.
try www.suse.com/oracle there you have a download to resolve the kernal problems.

Suggestions for Oracle 10g Installation using VMware in Windows XP.

Hi All,
I am using Intel(R) Core (TM) 2 Duo CPU P8600 @2.4 Ghz with 1.98 GB RAM with Windows XP with 70 GB disk space. I would like to install a 2 node RAC with ASM and if possible also configure a DG for learning and testing purpose.Please advice if this will work using a VMware . Is RAC VM possible only Linux or with Windows as well ?
I think 11g is out of scope since i don't have sufficient memory.
I am new to VMware and have not done any installations or used it till now.
It would be appreciated if you could help with these doubts.
1. How much memory can be allocated to each instances?If i am installing Linux how much memory is required ?
2. what will be the load on the CPU and will i be able to use it without any resource crunch ?
3.Once memory is allocated to VM, can it be claimed back , is it like if i am not starting the VMware services.. i have the full 2 GB in discretion?
4. Can 10g Standard editions be used for learning purposes?
If the above hardware is not sufficient, please suggest a suitable configuration
Hari
Edited by: Hari2012 on May 27, 2012 12:24 AM

You do not have sufficient hardware - you will likely need 6GB of RAM or more, plus 100G of disk or more and a multiprocessor machine. Each VM will need at least 2GB of RAM, and once all of the VMs/RAC are installed, the system will be pretty busy running 3 OS's (host and two guests) and two databases. If you do not start up the VMs, all of the memory is available for the host to use. 10g is no longer available for download, you will have to use 11g - yes SE edition is sufficient for learning purposes.
Re: Oracle RAC Desktop Setup
HTH
Srini

Installtion file's for Oracle 9i on AIX 5L

I've downloaded the 4 zip files for 9i on AIX 5L.
I've unzipped them but they don't seem to work properly. I can startup the OUI but I can't install the products so I assume I've done something wrong.
With the 4.3.3 version files you have gunzip them and then run cpio, but the 5L comes in .zip format.
Is there a correct procedure for unzipping these files like the previous version or will straight unzip work?

Hi,
have you see unzip instruction :
Instructions to install UnZip on UNIX platforms
1. Download the file and transfer it to the UNIX machine in binary mode.
2. Uncompress the file:
% uncompress unzip_<os>
3. Put the file in a directory that is included in your PATH, typically /usr/bin or
/usr/local/bin.
4. Make sure that the file has execution permissions set. If not, run:
% chmod 751 unzip_<os>
5. To unzip a file using this executable, just run:
% unzip_os <name of the file to be unzipped>
You can download unzip utility here http://updates.oracle.com/unzips/unzips.html
Nicolas.

Documentation for Oracle 10gR2 Installation

Hello,
I would like to know which document should I download in order to install Oracle 10gR2 on the following system:
-HW: IBM System x3550M3 Intel Xeon
-SW: Red Hat Linux 5.4
Thanks in advance for you help.
Regards,
Juan.

850252 wrote:
Hello,
I would like to know which document should I download in order to install Oracle 10gR2 on the following system:
-HW: IBM System x3550M3 Intel Xeon
-SW: Red Hat Linux 5.4
Thanks in advance for you help.
Regards,
Juan.http://www.oracle.com/pls/db102/homepage?remark=tahiti
Linux Installation Guide

Prerequisites for Oracle 9i installation AIX 5L V5.3

Similar Messages

Maybe you are looking for