Prerequisites for R/3 to connect to the BW 7.0 Systems

I have a R/3 System( r3 4.7 d). I am planning to install a BW 7.0(nw2004s) system.
What are the prerequisites for a R/3 System configuration to connect to the bW System . Such as minimum SP levels , minimum kernel levels in R/3

Hi Balaji,
Follow this link. I think this configuration guide will help you.
http://help.sap.com/bp_bblibrary/500/Documentation/BW_ConfGuide_EN.doc
Regards,
Raju.

Similar Messages

What are the benefits of buying an iPad 2 with wi-fi, or with 3G when I already have an iPhone 4 with 3G? My plan with was to go for wi-fi and connect to the internet through my iPhone 4. Am I missing out on anything by not getting 3G?

What are the benefits of buying an iPad 2 with wi-fi, or with 3G when I already have an iPhone 4 with 3G? My plan with was to go for wi-fi and connect to the internet through my iPhone 4. Am I missing out on anything by not getting 3G?

James9901 wrote:
I tried the tethering and hated it. The connection breaks every time I get > 25 feet from it and it's a pain to reestablish the connection. I suppose if I had to choose between breaking connections every now and then or paying another $100 + $25/month I'd do the tethering.
Or just carrying the phone in your pocket? Just saying.....

My flashplayer install for 11.9 looses connection at the 26%

my flashplayer install for 11.9 looses connection at the 26% mark for over twenty attempts, I am unable to watch video helps because the videos will not finish all the way through. I am also having problems installing previuos versions. I am runnning Mozilla on windows 7. any help please.

"Not valid win 32 application" is usually an indication that the file didn't fully download.
Flash Player Plug-in (All other browsers)
Before you download it, press Ctrl+J to open the downloads window. Make sure it fully downloads, including the virus scan. If you close the browser before it fully downloads and scans, it'll show up as an invalid file.

Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect request. Some functionality might be disabled

We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
request. Some functionality might be disabled.”
I have tried all possible ways that we found on blogs. We are still not able to solve this issue

I have had a lot of issues with the emulator in the past.
Check out this troubleshooting guide. It might help:
https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

Why can't I use the Column Browser for my iPod when connected to the computer?

In iTunes 11, I can use the Column Browser while viewing my music library on the computer. But it's inexplicably not available for viewing the music on my iPod when it's connected to the computer to sync.
The Column Browser is the simplest, easiest, most elegant way for me to review what's on my iPod, and create Playlists from my music and CD books. It was available in 10.7 and is available on the computer, why not the iPod????!!!???
Why mess around changing something that isn't broken - after all these years why can't that option still be available? It doesn't have to be the default, just be available. Will I have to downgrade to 10.7 yet again????
And you don't even have a relevant category for me to choose from below!! It makes sense to me that you provide a general "Using iTunes" category.

Thanks for your reply, but I've already done that and the Column Browser options are completely grayed out. I've taken a screen shot and hope I can paste it in here. You'll see I have the sidebar open. That's the way I prefer to deal with iTunes.
This happened after I updated to iTunes 11.0.4. Perhaps that changed the setting options. I think I had the Column Browser option prior to that, but I just got a new iPod and I was busy loading stuff, so not completely sure if it worked before the update. But I think I would have noticed, because it bugs me so much not to have the option.

Best Practice for closing a blocking connection to the database.

Background:
Using toplink/eclipselink to manage the the connection to the database.
We support 3 databases, Oracle, Mysql, and MSSQL.
We host the an application locally (SAAS) and we also distribute it to our clients so they can run it on premise.
Problem:
From time to time the application will execute a route that query the DB and will take 10+ minutes. When we find these queries we generally fix them, but it takes time to fix the problem and roll new code to production. We have also found that if an end user executes the query to many times they can potentially bring the service down - maxing out the database connection, or putting a huge load on the DB effectively rendering the system to a crawl.
During this time period the IT team need a way to abort a transaction. The current approach, for our SAAS solution, to scan the database find to the long running query and kill it. The application is smart enough to recover and everything seems to work fine. This doesn't always work for our on premise customers - often they don't have a DBA or adequate resources to monitor the system. Therefore, I'm looking for a way to have the application kill/close any query that is lasting longer then X minutes. We currently track the duration of every thread so I can get the time the thread has been actively running.
Stack Trace
Currently we keep track of how long each thread is running waiting for a response from the database such as the stacktrace below, I would like to grab the connection and physically close it. Since we are using a java socket and it's in a blocking state there is no way for us to interrupt the thread. The only option is to wait for it to receive a response from the db - kill the sql process - or to close the java socket.
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:129)
com.mysql.jdbc.util.ReadAheadInputStream.fill(ReadAheadInputStream.java:113)
com.mysql.jdbc.util.ReadAheadInputStream.readFromUnderlyingStreamIfNecessary(ReadAheadInputStream.java:160)
com.mysql.jdbc.util.ReadAheadInputStream.read(ReadAheadInputStream.java:188)
com.mysql.jdbc.MysqlIO.readFully(MysqlIO.java:1931)
com.mysql.jdbc.MysqlIO.reuseAndReadPacket(MysqlIO.java:2380)
com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2909)
com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1600)
com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1695)
com.mysql.jdbc.Connection.execSQL(Connection.java:2998)
com.mysql.jdbc.Connection.execSQL(Connection.java:2927)
com.mysql.jdbc.Statement.executeQuery(Statement.java:956)
org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeSelect(DatabaseAccessor.java:854)
org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:573)
org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:501)
org.eclipse.persistence.sessions.server.ServerSession.executeCall(ServerSession.java:536)
org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:205)
org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:191)
org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:262)
org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeSelect(DatasourceCallQueryMechanism.java:244)
org.eclipse.persistence.queries.DataReadQuery.executeNonCursor(DataReadQuery.java:188)
org.eclipse.persistence.queries.DataReadQuery.executeDatabaseQuery(DataReadQuery.java:144)
org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:664)
org.eclipse.persistence.queries.DataReadQuery.execute(DataReadQuery.java:130)
org.eclipse.persistence.internal.sessions.AbstractSession.internalExecuteQuery(AbstractSession.java:2243)
org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1181)
org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1165)
org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1125)
Question
What is the best way to grab the connection and close it - from another thread?

The reason for changing the namespace is to guarantee that they appear as different versions. The namespace is part of the strong name of the DLL when deployed. Yes they will be deployed to separate servers because a server can only belong
to one farm. But when you are doing a migration it won't be clear that you need to install the 2013 version since the .DLL will report that it exists in the 2010 farm already. It will work without changing the namespace, but it would be best to differentiate
versions at that level to avoid confusion.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

For those experiencing problems connecting to the Music Stor

I sent the following comments through feedback to Apple:
Since upgrading to iTunes 6 I've lost the ability to connect to the Music Store. I can browse, but I can't buy anything. I get an error message (-9813). I went to discussions to see if I was the only one having this problem, but I see that many people are experienging it.
I went to iTunes support, and followed the troubleshooting steps stated there:
http://www.apple.com/support/itunes/musicstore/connect/
but it didn't work.
I then noticed that not only I wasn't able to connect to ITMS, but the same problem occurred when I tried syncing my computer with my iDisk (Through system preferences), and also when I tried to connect to home page through iPhoto, or when I try to backup to my iDisk (using Backup 3).
I first thought, as many in these discussions, that there is a problem with the Music Store, but I think the problem seems to be .mac related. And more precisely, with port 443, which is the port used for SSL and HTTPS connections.
Speaking of HTTPS, let me tell you that when I try to connect to a HTTPS site, like the Apple store, for example, I get a message stating that Safari doesn't recognize Apple's own certificate to grant access to that page.
I also thought the problem could be with my ISP, but I've been working with it for a long time now and never experienced a problem with it. Everything started happening after upgrading to iTunes 6.
I have no idea how to correct this problem, I believe I'm not the only one.
Juan

Try this
Cannot Access the Internet If Proxy Settings Are Incorrect
for the bar constantly loading, when that happens I click on the button to sign in (looks like an email address).

Looking for PPPoE host BUT connected to the Internet

Hi, so I have a home network that consists of a BritePort 8012-G1 which is set-up to connect to earthlink DSL using PPPoE with its login and password. The DSL modem is set in half-bridge mode (I am thinking of switching it to full bridge mode and authenticating with the airport extreme instead but that is really not my problem... if you have suggestions either way on this topic feel free to post in this thread but that is not the issue I want resolved) and passes ip and dns server information correctly to the airport extreme. The airport extreme is setup to share the internet connection using DHCP and NAT. There are 6 devices that connect to the airport extreme, 5 of which work perfectly. The ones that work are a Mac Pro running 10.5.4 connected through ethernet, a Macbook Pro running 10.5.4 connected through wifi, two iphones that connect using wifi when in the apartment and a nintendo wii also connecting through wifi. The last device, the one causing problems, is a macbook pro running 10.4.11 which is connecting through wifi.
The problem with this last computer is that when it connects to the airport extreme base station it continually says looking for PPPoE host in the menu bar. The strange thing is that the computer is connecting to the internet (you can browse the net and download stuff) even though it is showing the message. Even stranger is that in TCP/IP it doesn't show any DNS information (it should show the airport extreme). I had never had this happen before, but I recently changed the security settings on the airport from WPA/WAP2 to only have WAP2 so I thought that maybe by reversing it to the old setting the message would go away, but it didn't happen. You may all wonder why I think its a problem if I can still surf the net and download stuff, well first of all seeing the message is annoying, but more importantly it seems to have an effect on the speed at which I can surf the web on that computer. It is much slower than the other devices on the network and maybe it is even slowing down the network as a whole.
Just so you know, I have looked to make sure that all the use PPPoE settings are off in both the airport and ethernet configuration for this particular laptop. I have even turned them on and back off for good measure but it seems to make no difference. I have disconnected myself from the router and re-connected hundred of times.
Thank you for you time!
Daniel
PS Yes I have searched the forums before posting but everything I found about looking for PPPoE host had people not connected to the internet

I can't connect to my ISP using PPoE either using Firmware 7.3.2. I had to downgrade to 7.3.1 to connect to the PPoE.

HT4623 Hi. My device won't update iOS in settings. It won't download apps for me. Itis connected to the internet). The latest app I tried to download appears stuck! Has not completed its download, won't open and I cannot delete it. What can I do?

Hi. My device won't update iOS in settings. It won't download any new apps for me. (It is connected to the internet). The latest app I tried to download appears stuck! Has not completed its download, won't open and I cannot delete it. What can I do? I purchased the product online a year ago. I'm not sure of the exact date... I think it was late November 2012.
Any help appreciated.
Fileas

If this has happened more than once the problem is likely on your PC.
See here: http://www.apple.com/support/iphone/assistant/itunes/

For month I cannot connect to the Capital One online account services

Whenever I try to connect to the online services of Capital One in the uk, I get a note "We're sorry, Online Account Services is currently unavailable. I called Capital One and was told: now problem just use the Internet Explorer. But I prefer the Firefox. What can I do.

I assume you have looked at their site:
http://www.capitalone.com/about/browser-support/
Esp empty your cashe.

Safari 5.1 for Windows no longer connects to the internet. Anyone else see this?

I'm typing this from Firefox on the same Windows XP Pro machine which watching Safari in an infinite "connecing to www.apple.com" window. I've been using Safari on this same machine for over three years. Todays Safari update killed it.

No Woder, Apple broke something wiht this Update. There are too many ppl complaining post update.
Anyway, M also suffering the same glitch. Have saved the pain of uninstalling-installing of Safari/iTunes(thanks to other fellow sufferers).
Now, here is the complete picture:
- PPL said to clear out proxies or something. I did everything, but nomproxy settings are there.
- Oftenly, when on the preferences of Safari, i get this Error message for webkit2webprocess.exe has some probem. xpcom.dll is missing. Didnt get this msg tonight though.
- Downloaded WebKit and tried to run as said above. but it prompts as
Safari.exe - Entry Point Not Found
The procedure entry point u_strToUpper_4_0 could not be located in the dynamic link library icuuc40.dll.
OK
Now, tell me if i really need to re-install itunes/Safari??

What certificates does Firefox sync (for Android) use to connect to the server?

I removed all of the CA and root authorities and would like to know which one I need to put back in order to use sync? A Few of them looked like they could stay, but there were to many that looked like just anyone could install a certificate on my tablet.
So, I would like the entity name and sha (s) encryption keys so I can reactvate yours. Thank you.

The technical information about the Authentication Server is documented: [https://wiki.mozilla.org/Identity/Firefox-Accounts#Auth_Server]
Certificate Signing process specifically is done with this part of the api: [https://github.com/mozilla/fxa-auth-server/blob/master/docs/api.md#post-v1certificatesign] - I assume you would generate them there.

Why can't my computer establish a connection to the Creative Cloud file system??

Hi Folks,
First of all many thanks to all of you out there who published helpful tutorials or advices.
Here's my problem:
I have installed my Creative Cloud successfully and my CC Connector logged in and looked for updates and stuff - all fine. Unfortunately after that the connector gives the status: "No Connection to Creative Cloud!"...
My internet connection is OK, no local proxy, just Kaspersky Internet Security running etc...
My aim is to give material to a customer - so what went wrong?
Technical data:
OS: Windows 7 ultimate
PC: Chronos 7 (Samsung)
connected via LAN
Please help!

The file syincing service has been suspended until June 17.
More info in this blog post: http://blogs.adobe.com/creativecloud/update-on-creative-cloud-connection-and-file-sync-pre view/.
You can still upload files using the web service at https://creative.adobe.com/files and share individual files with the customer.

Connect to the computer a sound system 7,1 with one jack ??

hello everybody, i want to buy?the speakers system T7900, but i have only one jack slot on my computer. i have read that i can connect a system 7,1 with this slot, but i don't understand how is possible? to connect a 7,1 with jack slot. For information, i have a fujitsu siemens m3438g 75005 thank you to answer me

I think there's no problem in connecting a 7.1 system with one jack (if so always with the green one)But you have a cheap solution that allows you to have sound on all speakers:Buy two of these http://img.mercadolivre.com.br/jm/im...65_670.jpg&v=P
And in one of them insert the yellow and black jack and this adaptor will insert in one of the holes of the other adaptor along with the green jack having something like this.yellow/black | | adaptor/green | | adaptor | sound card
But, although it woks you won't have the same surround sound that you could have if you connected the speakers with the 3 jacks to a sound card (without adaptors). Hope you understand, and sorry for the bad english, I'm portuguese
Message Edited by grimreaper9 on 08-07-2007 03:03 AM

I have a Nissan Juke 2013. I was using my iphone 4S in the car for both phone and itunes through the car's audio system. I just purchased an iphone 5S. Can still use the phone but I cannot get itunes through the Aux feature. What is the fix?

I have a 2013 Nissan Juke. I was able to use my iphone 4S for both bluetooth phone and to play itunes. I have purchased an iphone 5s. The car will recognize the phone but I cannot play itunes in Aux. What is the fix? EmWest

Hi McCrubb!
I have an article here that can help you restore your iOS device more thoroughly:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using the Apple Support Communities!
Cheers,
Braden

Prerequisites for R/3 to connect to the BW 7.0 Systems

Similar Messages

Maybe you are looking for