Presentation Director error

I just upgraded to the latest version of Presentation Director on a T61 and now I get the following message when I try to start the program:
"Presentation Director detected the Lenovo USB Port Replicator with video. Please push the button on the front of port replicator or use the Lenovo display adapter task try icon for dual display control."
The message appears even when I am not using the port replicator. In addition, my port replicator does not have a button on the front and there is no display adapter task try icon. Prior to upgrading the version of Presentation Director I did not have any problems with the program.
Any suggestions are appreciated.

Hi, I also lost the Fn-F7 functionality due to company wide hotkey upgrade. I did the procedure as in the provided linek (also other updates required) and now when I start to install new presentation director it says:
Run a DLL as an App has encountered a problem and needs to close.
and then:
Internal error: failed to load LENOVO_GetSystemType
I also tried the tricks listed on
http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=5712&view=by_date_a...
but it did not succeed: Fn-F7 functionality is still missing
Any more hints, please?
Message Edited by mld on 09-23-2008 04:06 AM

Similar Messages

Presentation Director: Perpetual Error Message about Color + Resolution

I got my Presentation Director installed but now everytime I try to switch to my Dell 2405FPW through DVI, Presentation Director gives me an error that says "unable to display current settings. check resolution and color depth." However, it still displays the 1920x1200 resolution at 32 bit color - it just displays that error message when I try to use that profile - then Presentation Director just crashes completely ....
In addition, when I try to recreate my docked DVI profile, sometimes it allows me to output 1920, but sometimes it only allows me to select 1280x1024 from the drop down list... it's very buggy.
How do I go about fixing this?
Message Edited by singularity2006 on 12-28-2007 06:40 PM
Message Edited by singularity2006 on 12-28-2007 06:49 PM
T61_Wide | Model No. 7662 - CTO
Core 2 Duo T7250 | 2GB OCZ DDR2-800
82566MM Gigabit | 4965AGN Centrino Pro
Solved!
Go to Solution.

Okay, here's how it works. I think this works ... please someone try to verify.
To create the DVI output (docked) profile
1. Plug the laptop into the dock
2. Disable the nview plugin (right mouse click desktop > nview properties > disable all)
3. Enable both the laptop LCD and external LCD
4. Set the external LCD as secondary (extend desktop to this screen)
5. set the laptop LCD as primary (extend desktop to this screen and set as primary monitor)
6. Open presentation director and create a new profile
7. Select DVI output only and select resolution (up to 1920x1200 should be available now)
8. Test the setting
To update the profile for "my normal display settings"
9. Disable the external LCD (uncheck "extend desktop onto this monitor")
10. Set the appropriate resolution for the laptop LCD (sometimes after running Presentation director, it gets all weird)
11. Select "my normal display settings"
12. Click "capture"
That should do it .... what a pain though.
T61_Wide | Model No. 7662 - CTO
Core 2 Duo T7250 | 2GB OCZ DDR2-800
82566MM Gigabit | 4965AGN Centrino Pro

Can't uninstall presentation director rundll as a app error

Can anyone tell me how to manually uninstall presentation director

It is probably because you are not properly closing Firefox. Restarting your system would make sure that Firefox had terminated, but you do not have to do that.
To properly close Firefox on Windows systems, use
:File > Exit or "Firefox:" button > Exit
When you get the message "Firefox is already running" it is too late, and you must force termination of Firefox through the Windows Task Manager before restarting Firefox. Windows 7 has a keyboard shortcut to save you a step "Ctrl+Shift+Esc" then on "Processes" tab, select "firefox.exe" and use the "End Process" button. More thorough would be to right-click on the "firefox.exec" and choose "End Process Tree".
You would find firefox.exe in a Mozilla folder in your program files, but y0u would not want to delete it there, you would need to use the Control Panel which you have already identified and do it from there -- but generally you would not need to do that, and there is nothing in what you have posted to indicate that you should. But if you did do that, then don't let the install start Firefox for you as you would want to use you existing desktop icon or method of starting Firefox, and should decline having Firefox install start Firefox for you. When the install starts then invoke Firefox in your normal manner. This should eliminate problems of creating a new profile rather than using your old profile.

SL300 - Ultranav Driver, EasyEject utility, Presentation Director

Hi,
I have problems getting the touchpad to work and quite few other features after installing win7.
Right now the UltraNav driver wont install, tried both versions:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70340
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#unav
I installed the UltraNav Utility, got no errors on this install:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67226
Anyone else having troubles getting the driver to work on a SL300?
I also cant find a compatible driver for EasyEject and Presentation Director - any tip on where i can find one or when it might be released, would be awesome
And, I am still worried about the registry patches:
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#unav
Will these work on win 7? Should i install them when they are noted as compatible with vista?
Thx
G
Lenovo Thinkpad SL300
Original description: T5670(1.8 GHz), 2GB RAM, 160GB 5400rpm HD, 13.3in 1280x800 LCD, Intel X4500HD, CDRW/DVDRW, Intel 802.11agn wireless, Vodafone WWAN, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Fingerprint reader, Camera, 6c Li-Ion, Win 7 RTM

Hi,
I only get a message of: Install Failed! ThinkPad UltraNav
And the link about the registry:
http://www-307.ibm.com/pc/support/site.wss/MIGR-70413.html#inf
Thanks for looking into this
Lenovo Thinkpad SL300
Original description: T5670(1.8 GHz), 2GB RAM, 160GB 5400rpm HD, 13.3in 1280x800 LCD, Intel X4500HD, CDRW/DVDRW, Intel 802.11agn wireless, Vodafone WWAN, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Fingerprint reader, Camera, 6c Li-Ion, Win 7 RTM

Is There A Presentation Director for Win 7 SP1?

T520i, Win 7 SP1. Is there a Win 7 version of the Presentation Director?
Thanks,
Solved!
Go to Solution.

Hi there,
If you are not satisfied with the built in Win7 tool, maybe the following also works for you: I just installed the Lenovo Presentation Director v4.64 for Vista 64bit on a T61p and on my new W520 (2960XM, K2000 Graphics) and it works perfectly! You have to ignore only one error message. As soon as you need more than 4 profiles and you don't like the typical Win7 mixing up of desctop icons, this is in my opinion the only and also best solution.
Best regards,
Tom

T400 XP Presentation Director Problem

I just did a clean install of XP on T400, and could not get Presentation Director to work.
Whenever I was trying to apply or test a scheme (even the "Captured display settings" with no external monitor), I got this error message "The following settings you have selected cannot be applied properly. Change the setting and try again.
Display Configuration".
I suspect there was a conflict between Presention Director and Catalyst Control Center.(CCC could control the displays without problem.)
The lenovo ATI driver was just released in March, while the PD was released last year.
Could that be a problem? I am reluctant to downgrade to old ATI driver. Did Lenovo not test their drivers for compatibilty before release?
If anyone has solved similar problems before, please advise.
T400 2767
XP SP3 clean install
Presentation Director 4.32 02 2009/09/11
ATI Driver 8.712-100302b-097094C-Lenovo
Hotkey feature 3.02.0001
BIOS: Discrete Display only
The problem is 100% reproducible with above settings.

Been there, but its been a while, and although I can't give you an exact step-by-step solution, I hope given the urgency on your side that I can point you in a direction you haven't gone or gone far enough in. I fixed the same nagging problem by working with both the basic and Advanced menus at: Desktop Right-Click>Display Properties>Settings. In particular check all settings for both displays in the tabs of the Advanced menu. It is a careful process to be sure you check the properties of EACH monitor and not just run through them once which will apply for just the default monitor. The cause in my case was a conflict of a setting between the Presentation Director and the Display Settings. You may do best if you nix the presentation director while getting the settings sorted out. Also, ATI has a great display management program similar to Windows' Presentation Director. I am sorry to be strapped on time as I write this. You may have been through everything I suggest, but I do hope something I wrote helps you get it fixed. I'll check back when possible today. TSRing
**If You Don't Shoot, You'll Never Miss...**

Presentation Director install fails on T61p

Hi
I have currently Presentation Director 3.03a on my T61p (original install). When trying to install any of the newer versions, I get the following error messages:
"Run a DLL as an App has encountered a problem and needs to close."
Internal error: failed to load LENOVO_GetSystemType
Anyone have ideas how to fix this annoying problem?
-Mikko

Hi,
Unfortunately I'm also confirming that there is an issue with the latest version of Presentation Director. I have upgraded my X61 to the latest version.
Now, even if the selection windows appears when I press Fn+F7, any selection of the presentation scheme leads to a crash of Presentation Director with the following error message:
"Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\PROGRAM~1\Lenovo\NPDIRECT\Pdirect.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information."
It looks like there are a few issues in the distribution of the rewritten Presentation Director.
Any help will be appreciated.
Michael

Presentation Director

I have a T41 and have attached it to a Sony WEGA TV. I can get the the systems linked but the picture is black and white only.
Since I want to review photos on the TV, how do I get color?

Presentation Director is not supported for use with Windows 7, so that is why you are unable to run it.
Win 7 has presentation facilities built-in, so does not require an additional utility.
Cheers,
Bill
I don't work for Lenovo

Presentation Director loses settings when switching between Chinese and English

I've done the "Install files for East Asian languages" and then set the "Language for non-Unicode programs" to "Chinese (PRC)". I do this for our presales people so they can show our prospects that our software is translated (for those that have plants in China and the US). I have the default language set to English. I don't believe it's relevant but I should also mention that this is on a Lenovo T61 with XP-SP3.
When I use the Presentation Director (Fn+F7) most of the screen shows in Chinese. The ones I've added show in English (I have a screen snapshot). I also get Chinese characters in other Lenovo utilities as well.
So I figured I'd just change the "Language for non-Unicode programs" back to English, reboot, and the display would be OK. Not so! The display is in English all right, but NOTHING appears in the window - none of the default settings, none that I added, JUST NOTHING! I have a snapshot of this as well.
I changed the Unicode setting back to Chinese, reboot, and Presentation Director shows all of them still there, some in Chinese and some in English like before.
Does anyone have any ideas how I can get the Presentation Director utility to display properly (in English) and show all the original settings as well? Obviously the settings are stored somewhere since when Chinese is turned on it can display them.
Thanks in advance!
Tim

i was wondering if you could give me a quick overview of how to write characters
Check out this site:
http://www.yale.edu/chinesemac/
http://www.yale.edu/chinesemac/pages/input_methods.html#Apple

Missing schemes in Presentation Director

After installing Presentation Director 4.07, I was shocked to discover all the display schemes missing. I've tried adding new schemes but the program doesn't seem to recognize the notebook LCD display - I'm unable to set the resolution or color depth.
However, I can still project to an external monitor/projector by setting the Fn+F7 option to "Switch the display output from Notebook LCD to external monitor to both (and then repeat)".
I've tried uninstalling and reinstalling but that didn't solve the issue. I've also attempted to update my display drivers, install Lenovo System Interface Driver, and even rolling back to version 4.03, but none of this managed to remedy the problem.
I'm using an X200 running on Windows XP Pro.
Would appreciate any advice I can get. Thanks in advance!

I updated it through TVSU the first time round. When it didn't work, I uninstalled it and installed 4.03 but it didn't function as well. So, I went to the Lenovo support site to download the 4.07 update, thinking that there might be an issue with the update through SU, but to my dismay, that failed as well. And as far as I know, there is one other user in this forum that has faced the same issue after updating to 4.07.
I have exhausted every possible solution that I could have thought of, short of reformatting which is something I'm not contemplating, but nothing seems to be able to resolve the issue. Is there a diagnostics tool, capable of generating an analysis report of some sort, that I could run on my PC so that you can better understand the issue?

Presentation Director Monitor Drop Down Menus Blank

I'm trying to get Presentation Director functioning properly, but there are a couple of screwy things going on:
If I check the properties of the "Capture" profile, it has the resolution of external monitor incorrect. (1920 x 1200 Vs Captured 1024X768). Yes, even after re-capturing.
When I go to edit a profile, the drop-down menus for both the built-in LCD and external monitor for resolution and color quality are blank. Both the standing values and the contents of the drop-downs are blank.
(I'd post a picture, but the work firewall won't let me get to any image hosting options.)
Relevant Info:
W510
nvidia Quadro FX 880M
Newest nvidia drivers
Newest presentation director (4.62)
Got rid of nvidia NView crapware, but the NVidia desktop manager is still present. It actually recognizes the proper resolutions for each display, but doesn't have any good way of quickly switching display setups like PD does.
Any suggestions?

I assumed you were running XP. This video driver persistency feature is implemented on XP as well as Vista/Win7. I don't know why the PD settings are blank.
For your first two scenarios, you should be able to configure that one time manually and then have the video driver automatically remember the settings as you connect and disconnect the display. First, with no monitor connected, configure the TPLCD how you want it. Then connect the monitor and configure both it and the TPLCD how you want them. Then disconnect the monitor and the TPLCD should automatically revert to the settings you specified when the monitor wasn't connected. Then reconnect the monitor and the settings for both monitor and TPLCD should revert to the settings you specified when the monitor was connected previously. Have you tried it? This is a very common configuration scenario that I know many customers are using successfully without the assistance of PD or any other software.
For your last two scenarios, you will just need to experiment to see if the the persistency works or not, like I said it depends on how old the projectors are. If it doesn't work, or if you are frequently connecting to different projectors, then you should be able to use PD for the projector ONLY! don't try to use PD to control the TPLCD.

T42 LCD is dark, external monitor sometimes works, Presentation Director seems worthless

On Friday, my LCD went dark. When I looked really hard, I could see all the screens that I'd been working with, but I couldn't bring them to light. If I shut the cover and waited for the machine to suspend itself, then opened the cover, I'd get the LCD back, for 10-15 minutes. Then the LCD would go dark again.
When I connected the T42 to an external screen, the LCD contents appeared on the other screen, and then the the LCD came back. While I had screen(s), I did a bunch of system updates (from Lenovo) and ran PCDoctor several times. Everything checked out.
When I disconnected the external drive, I lost the LCD again. I tried to work with the Presentation Director, but the T42 just doesn't want to obey. The Fn F7 keys are working inconsistently. I am in doctoral student hell, facing (what feel like) already impossible deadlines and I have to get this thing working. Does anybody have any suggestions?
Here's info that may or may not be relevant. Thank you in advance....
T42 2373
XP Professional
BIOS 3.23 IRETDRWW
ATI Mobility Radeon 9000
ATI Control Panel 6.14.10.5154
ATI Hydravision 3.25.0006
ATI Display Driver 8.133.2.1.1-061116a-040094C

Welcome to the forum!
Prior to this last episode, was your LCD reddish/pinkish on initial boot, or when running on battery?
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

The black on screen presentation director didn't appear when i press FN + F7

hi everyone,
the black on screen presentation director didn't appear when i press the hotkey FN + F7! presentation director itself works when i start it trought thinkvantage productivitycenter (the white one.
when i press the fn + f7 hotkey...a sound appears but the black menu is nowhere!
i tryed the old and new hotkey drivers aswell the presentation director!
cheers raffa
Message Edited by ict on 12-19-2008 12:25 AM

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
If no success...
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

T61 and Presentation director 4.03

Hi, I have a T61 notebook, upgraded ThinkVantage software and now I am facing serious problem with Presentation director. When I open the presentation chooser with Fn+F7, I can see all old profiles to be imported from previous version. The problem is when I go to the schemes manager. In the manager's screen I only see a blank window with title "Fn+F7 menu" and "Display Scheme Name". No schemes are listed below :-( So I guess I can not add, remove, change schemes...
I tried to uninstall the manager and install it again, the old schemes disapeared but the problem persists...
Do you have any idea or help?... Thanks, B.

I've had problems with 4.03 version also. One T61 had profiles just messed up, Presentation profile was disappearing from the menu and was working only occasionally.
Also, on T60 all profiles were missing, if you tried to create a new one it would not recognize the monitor! I already did a reinstall but it didn't help at all.
New 4.0x version has been problematic from the beginning, I have faced numerous problems with it. Even the user interface is "messed up". I have taught people to use Presentation Director, but if this is the quality they will soon start experimenting with Windows and/or nvidia settings...

Problems with Presentation Director

Hello,
I enjoy really to work with the Presentation Director (PD); I also enjoy now working with Windows 7 x64
But the problem is, that the PD doesn't work for me on Win 7
In the best case it does nothing, in the worst case it tries to change the settings ever and ever again and makes it impossible to do anything else! A logoff is at the latter the only help ...
Is there any solution in sight?
Thank you very much!
With very kind regards,
sonny
Message Edited by sonny_G on 05-28-2009 04:07 PM
ThinkPad T400 | 2767-2MG | Windows 7 Professional x64
ThinkPad T60 | 2007-63G | Windows Vista Business x86

hubertlam wrote:
For me, Windows 7 works well enough without Presentation Director -- it actually remembers your settings!
Yeah, what Hubert said. I kind of stopped using Presentation Director when Vista came out - although Presentation Director works OK (it does what it says it will do), I honestly don't think it is necessary any more.
I frequently switch back and forth between a dock with an external DVI monitor, using the laptop by itself, and using the laptop with an external projector. The computer manages to figure out on its own what it is connected to and send the signal out to the right device. I don't think I have used Presentation Director since the end of 2007. I just don't need it anymore, and I find that the "simpler" I can keep the computer (meaning, the fewer the number of little helper applications are installed), the easier life is.
Truth be told, same goes for Access Connections, although I don't use a VPN or anything complex like that.
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

Presentation Director error

Similar Messages

Maybe you are looking for